static inline int tcp_ipv4_bind(FAR struct tcp_conn_s *conn,
FAR const struct sockaddr_in *addr)
{
int port;
int ret;
/* Verify or select a local port and address */
net_lock();
/* Verify or select a local port (host byte order) */
#ifdef CONFIG_NETDEV_MULTINIC
port = tcp_selectport(PF_INET,
(FAR const union ip_addr_u *)&addr->sin_addr.s_addr,
ntohs(addr->sin_port));
#else
port = tcp_selectport(ntohs(addr->sin_port));
#endif
if (port < 0)
{
nerr("ERROR: tcp_selectport failed: %d\n", port);
return port;
}
/* Save the local address in the connection structure (network byte order). */
conn->lport = htons(port);
#ifdef CONFIG_NETDEV_MULTINIC
net_ipv4addr_copy(conn->u.ipv4.laddr, addr->sin_addr.s_addr);
#endif
/* Find the device that can receive packets on the network associated with
* this local address.
*/
ret = tcp_local_ipv4_device(conn);
if (ret < 0)
{
/* If no device is found, then the address is not reachable */
nerr("ERROR: tcp_local_ipv4_device failed: %d\n", ret);
/* Back out the local address setting */
conn->lport = 0;
#ifdef CONFIG_NETDEV_MULTINIC
net_ipv4addr_copy(conn->u.ipv4.laddr, INADDR_ANY);
#endif
return ret;
}
net_unlock();
return OK;
}
int localhost_initialize(void)
{
FAR struct lo_driver_s *priv;
/* Get the interface structure associated with this interface number. */
priv = &g_loopback;
/* Initialize the driver structure */
memset(priv, 0, sizeof(struct lo_driver_s));
priv->lo_dev.d_ifup = lo_ifup; /* I/F up (new IP address) callback */
priv->lo_dev.d_ifdown = lo_ifdown; /* I/F down callback */
priv->lo_dev.d_txavail = lo_txavail; /* New TX data callback */
#ifdef CONFIG_NET_IGMP
priv->lo_dev.d_addmac = lo_addmac; /* Add multicast MAC address */
priv->lo_dev.d_rmmac = lo_rmmac; /* Remove multicast MAC address */
#endif
#ifdef CONFIG_NET_MULTIBUFFER
priv->lo_dev.d_buf = g_iobuffer; /* Attach the IO buffer */
#endif
priv->lo_dev.d_private = (FAR void *)priv; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmissions */
priv->lo_polldog = wd_create(); /* Create periodic poll timer */
/* Register the loopabck device with the OS so that socket IOCTLs can b
* performed.
*/
(void)netdev_register(&priv->lo_dev, NET_LL_LOOPBACK);
/* Set the local loopback IP address */
#ifdef CONFIG_NET_IPv4
net_ipv4addr_copy(priv->lo_dev.d_ipaddr, g_lo_ipv4addr);
net_ipv4addr_copy(priv->lo_dev.d_draddr, g_lo_ipv4addr);
net_ipv4addr_copy(priv->lo_dev.d_netmask, g_lo_ipv4mask);
#endif
#ifdef CONFIG_NET_IPv6
net_ipv6addr_copy(priv->lo_dev.d_ipv6addr, g_lo_ipv6addr);
net_ipv6addr_copy(priv->lo_dev.d_ipv6draddr, g_lo_ipv6addr);
net_ipv6addr_copy(priv->lo_dev.d_ipv6netmask, g_ipv6_alloneaddr);
#endif
/* Put the network in the UP state */
priv->lo_dev.d_flags = IFF_UP;
return lo_ifup(&priv->lo_dev);
}
int net_delroute(in_addr_t target, in_addr_t netmask)
{
struct route_match_s match;
/* Set up the comparison structure */
match.prev = NULL;
net_ipv4addr_copy(match.target, target);
net_ipv4addr_copy(match.netmask, netmask);
/* Then remove the entry from the routing table */
return net_foreachroute(net_match, &match) ? OK : -ENOENT;
}
void smtp_configure(FAR void *handle, FAR const char *lhostname,
FAR const in_addr_t *paddr)
{
FAR struct smtp_state *psmtp = (FAR struct smtp_state *)handle;
psmtp->localhostname = lhostname;
net_ipv4addr_copy(psmtp->smtpserver, paddr);
}
ssize_t psock_udp_send(FAR struct socket *psock, FAR const void *buf,
size_t len)
{
FAR struct udp_conn_s *conn;
union
{
struct sockaddr addr;
#ifdef CONFIG_NET_IPv4
struct sockaddr_in addr4;
#endif
#ifdef CONFIG_NET_IPv6
struct sockaddr_in6 addr6;
#endif
} to;
socklen_t tolen;
DEBUGASSERT(psock != NULL && psock->s_crefs > 0);
DEBUGASSERT(psock->s_type != SOCK_DGRAM);
conn = (FAR struct udp_conn_s *)psock->s_conn;
DEBUGASSERT(conn);
/* Was the UDP socket connected via connect()? */
if (!_SS_ISCONNECTED(psock->s_flags))
{
/* No, then it is not legal to call send() with this socket. */
return -ENOTCONN;
}
/* Yes, then let psock_sendto to the work */
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (conn->domain == PF_INET)
#endif
{
tolen = sizeof(struct sockaddr_in);
to.addr4.sin_family = AF_INET;
to.addr4.sin_port = conn->rport;
net_ipv4addr_copy(to.addr4.sin_addr.s_addr, conn->u.ipv4.raddr);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
tolen = sizeof(struct sockaddr_in6);
to.addr6.sin6_family = AF_INET6;
to.addr6.sin6_port = conn->rport;
net_ipv6addr_copy(to.addr6.sin6_addr.s6_addr, conn->u.ipv6.raddr);
}
#endif /* CONFIG_NET_IPv6 */
return psock_udp_sendto(psock, buf, len, 0, &to.addr, tolen);
}
FAR struct igmp_group_s *igmp_grpalloc(FAR struct net_driver_s *dev,
FAR const in_addr_t *addr)
{
FAR struct igmp_group_s *group;
net_lock_t flags;
nllvdbg("addr: %08x dev: %p\n", *addr, dev);
if (up_interrupt_context())
{
#if CONFIG_PREALLOC_IGMPGROUPS > 0
grplldbg("Use a pre-allocated group entry\n");
group = igmp_grpprealloc();
#else
grplldbg("Cannot allocate from interrupt handler\n");
group = NULL;
#endif
}
else
{
grplldbg("Allocate from the heap\n");
group = igmp_grpheapalloc();
}
grplldbg("group: %p\n", group);
/* Check if we successfully allocated a group structure */
if (group)
{
/* Initialize the non-zero elements of the group structure */
net_ipv4addr_copy(group->grpaddr, *addr);
sem_init(&group->sem, 0, 0);
/* Initialize the group timer (but don't start it yet) */
group->wdog = wd_create();
DEBUGASSERT(group->wdog);
/* Interrupts must be disabled in order to modify the group list */
flags = net_lock();
/* Add the group structure to the list in the device structure */
sq_addfirst((FAR sq_entry_t *)group, &dev->grplist);
net_unlock(flags);
}
return group;
}
static inline void accept_tcpsender(FAR struct socket *psock,
FAR struct tcp_conn_s *conn,
FAR struct sockaddr *addr,
socklen_t *addrlen)
{
if (addr)
{
/* If an address is provided, then the length must also be provided. */
DEBUGASSERT(addrlen);
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
/* If both IPv4 and IPv6 support are enabled, then we will need to
* select which one to use when obtaining the sender's IP address.
*/
if (psock->s_domain == PF_INET)
#endif /* CONFIG_NET_IPv6 */
{
FAR struct sockaddr_in *inaddr = (FAR struct sockaddr_in *)addr;
inaddr->sin_family = AF_INET;
inaddr->sin_port = conn->rport;
net_ipv4addr_copy(inaddr->sin_addr.s_addr, conn->u.ipv4.raddr);
*addrlen = sizeof(struct sockaddr_in);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
/* Otherwise, this the IPv6 address is needed */
else
#endif /* CONFIG_NET_IPv4 */
{
FAR struct sockaddr_in6 *inaddr = (FAR struct sockaddr_in6 *)addr;
DEBUGASSERT(psock->s_domain == PF_INET6);
inaddr->sin6_family = AF_INET6;
inaddr->sin6_port = conn->rport;
net_ipv6addr_copy(inaddr->sin6_addr.s6_addr, conn->u.ipv6.raddr);
*addrlen = sizeof(struct sockaddr_in6);
}
#endif /* CONFIG_NET_IPv6 */
}
}
int arp_send(in_addr_t ipaddr)
{
FAR struct net_driver_s *dev;
struct arp_notify_s notify;
struct timespec delay;
struct arp_send_s state;
int ret;
/* First check if destination is a local broadcast. */
if (ipaddr == INADDR_BROADCAST)
{
/* We don't need to send the ARP request */
return OK;
}
#ifdef CONFIG_NET_IGMP
/* Check if the destination address is a multicast address
*
* - IPv4: multicast addresses lie in the class D group -- The address range
* 224.0.0.0 to 239.255.255.255 (224.0.0.0/4)
*
* - IPv6 multicast addresses are have the high-order octet of the
* addresses=0xff (ff00::/8.)
*/
if (NTOHL(ipaddr) >= 0xe0000000 && NTOHL(ipaddr) <= 0xefffffff)
{
/* We don't need to send the ARP request */
return OK;
}
#endif
/* Get the device that can route this request */
dev = netdev_findby_ipv4addr(INADDR_ANY, ipaddr);
if (!dev)
{
nerr("ERROR: Unreachable: %08lx\n", (unsigned long)ipaddr);
ret = -EHOSTUNREACH;
goto errout;
}
/* ARP support is only built if the Ethernet data link is supported.
* Continue and send the ARP request only if this device uses the
* Ethernet data link protocol.
*/
if (dev->d_lltype != NET_LL_ETHERNET)
{
return OK;
}
/* Check if the destination address is on the local network. */
if (!net_ipv4addr_maskcmp(ipaddr, dev->d_ipaddr, dev->d_netmask))
{
in_addr_t dripaddr;
/* Destination address is not on the local network */
#ifdef CONFIG_NET_ROUTE
/* We have a routing table.. find the correct router to use in
* this case (or, as a fall-back, use the device's default router
* address). We will use the router IP address instead of the
* destination address when determining the MAC address.
*/
netdev_ipv4_router(dev, ipaddr, &dripaddr);
#else
/* Use the device's default router IP address instead of the
* destination address when determining the MAC address.
*/
net_ipv4addr_copy(dripaddr, dev->d_draddr);
#endif
ipaddr = dripaddr;
}
/* The destination address is on the local network. Check if it is
* the sub-net broadcast address.
*/
else if (net_ipv4addr_broadcast(ipaddr, dev->d_netmask))
{
/* Yes.. We don't need to send the ARP request */
return OK;
}
/* Allocate resources to receive a callback. This and the following
* initialization is performed with the network lock because we don't
* want anything to happen until we are ready.
*/
net_lock();
state.snd_cb = arp_callback_alloc(dev);
if (!state.snd_cb)
{
nerr("ERROR: Failed to allocate a callback\n");
ret = -ENOMEM;
goto errout_with_lock;
}
/* This semaphore is used for signaling and, hence, should not have
* priority inheritance enabled.
*/
(void)nxsem_init(&state.snd_sem, 0, 0); /* Doesn't really fail */
nxsem_setprotocol(&state.snd_sem, SEM_PRIO_NONE);
state.snd_retries = 0; /* No retries yet */
state.snd_ipaddr = ipaddr; /* IP address to query */
/* Remember the routing device name */
strncpy((FAR char *)state.snd_ifname, (FAR const char *)dev->d_ifname,
IFNAMSIZ);
/* Now loop, testing if the address mapping is in the ARP table and re-
* sending the ARP request if it is not.
*/
ret = -ETIMEDOUT; /* Assume a timeout failure */
while (state.snd_retries < CONFIG_ARP_SEND_MAXTRIES)
{
/* Check if the address mapping is present in the ARP table. This
* is only really meaningful on the first time through the loop.
*
* NOTE: If the ARP table is large than this could be a performance
* issue.
*/
if (arp_find(ipaddr, NULL) >= 0)
{
/* We have it! Break out with success */
ret = OK;
break;
}
/* Set up the ARP response wait BEFORE we send the ARP request */
arp_wait_setup(ipaddr, ¬ify);
/* Arm/re-arm the callback */
state.snd_sent = false;
state.snd_result = -EBUSY;
state.snd_cb->flags = (ARP_POLL | NETDEV_DOWN);
state.snd_cb->priv = (FAR void *)&state;
state.snd_cb->event = arp_send_eventhandler;
/* Notify the device driver that new TX data is available.
* NOTES: This is in essence what netdev_ipv4_txnotify() does, which
* is not possible to call since it expects a in_addr_t as
* its single argument to lookup the network interface.
*/
if (dev->d_txavail)
{
dev->d_txavail(dev);
}
/* Wait for the send to complete or an error to occur.
* net_lockedwait will also terminate if a signal is received.
*/
do
{
(void)net_lockedwait(&state.snd_sem);
}
while (!state.snd_sent);
/* Check the result of the send operation */
ret = state.snd_result;
if (ret < 0)
{
/* Break out on a send failure */
nerr("ERROR: Send failed: %d\n", ret);
break;
}
/* Now wait for response to the ARP response to be received. The
* optimal delay would be the work case round trip time.
* NOTE: The network is locked.
*/
delay.tv_sec = CONFIG_ARP_SEND_DELAYSEC;
delay.tv_nsec = CONFIG_ARP_SEND_DELAYNSEC;
ret = arp_wait(¬ify, &delay);
/* arp_wait will return OK if and only if the matching ARP response
* is received. Otherwise, it will return -ETIMEDOUT.
*/
if (ret >= OK)
{
/* Break out if arp_wait() fails */
break;
}
/* Increment the retry count */
state.snd_retries++;
nerr("ERROR: arp_wait failed: %d\n", ret);
}
nxsem_destroy(&state.snd_sem);
arp_callback_free(dev, state.snd_cb);
errout_with_lock:
net_unlock();
errout:
return ret;
}
int net_delroute_ipv4(in_addr_t target, in_addr_t netmask)
{
struct route_match_ipv4_s match;
struct net_route_ipv4_s route;
struct file fshandle;
off_t filesize;
ssize_t nwritten;
ssize_t nread;
off_t pos;
int nentries;
int index;
int ret;
/* We must lock out other accesses to the routing table while we remove
* entry
*/
ret = net_lockroute_ipv4();
if (ret < 0)
{
nerr("ERROR: net_lockroute_ipv4 failed: %d\n", ret);
return ret;
}
/* Get the size of the routing table (in entries) */
nentries = net_routesize_ipv4();
if (nentries < 0)
{
ret = nentries;
goto errout_with_lock;
}
else if (nentries == 0)
{
ret = -ENOENT;
goto errout_with_lock;
}
/* Set up the comparison structure */
net_ipv4addr_copy(match.target, target);
net_ipv4addr_copy(match.netmask, netmask);
match.index = 0;
/* Then find the index into the routing table where the match can be found */
ret = net_foreachroute_ipv4(net_match_ipv4, &match);
if (ret < 0)
{
/* And error occurred */
goto errout_with_lock;
}
else if (ret == 0)
{
/* No match found */
ret = -ENOENT;
goto errout_with_lock;
}
/* Open the routing table for read/write access */
ret = net_openroute_ipv4(O_RDWR, &fshandle);
if (ret < 0)
{
nerr("ERROR: Could not open IPv4 routing table: %d\n", ret);
goto errout_with_lock;
}
#ifdef CONFIG_ROUTE_IPv4_CACHEROUTE
/* We are committed to modifying the routing table. Flush the in-memory
* routing table cache.
*/
net_flushcache_ipv4();
#endif
/* Loop, copying each entry, to the previous entry thus removing the entry
* to be deleted.
*/
for (index = match.index + 1; index < nentries; index++)
{
/* Seek to the current entry to be moved */
pos = net_seekroute_ipv4(&fshandle, index);
if (pos < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)pos);
ret =(int)pos;
goto errout_with_fshandle;
}
/* Read the routing table entry at this position */
nread = net_readroute_ipv4(&fshandle, &route);
if (nread < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)nread);
ret = (int)nread;
goto errout_with_fshandle;
}
else if (nread == 0)
{
nerr("ERROR: Unexpected end of file\n");
ret = -EINVAL;
goto errout_with_fshandle;
}
/* Seek to the previous entry to be replaced */
pos = net_seekroute_ipv4(&fshandle, index - 1);
if (pos < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)pos);
ret =(int)pos;
goto errout_with_fshandle;
}
/* Now write the record to its new location */
nwritten = net_writeroute_ipv4(&fshandle, &route);
if (nwritten < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)nwritten);
ret = (int)nwritten;
goto errout_with_fshandle;
}
}
/* Now truncate the one duplicate entry at the end of the file. This may
* result in a zero length file.
*/
filesize = (nentries - 1) * sizeof(struct net_route_ipv4_s);
ret = file_truncate(&fshandle, filesize);
errout_with_fshandle:
(void)net_closeroute_ipv4(&fshandle);
errout_with_lock:
(void)net_unlockroute_ipv4();
return ret;
}
static uint16_t udp_datahandler(FAR struct net_driver_s *dev, FAR struct udp_conn_s *conn,
FAR uint8_t *buffer, uint16_t buflen)
{
FAR struct iob_s *iob;
int ret;
#ifdef CONFIG_NET_IPv6
FAR struct sockaddr_in6 src_addr6;
#endif
#ifdef CONFIG_NET_IPv4
FAR struct sockaddr_in src_addr4;
#endif
FAR void *src_addr;
uint8_t src_addr_size;
/* Allocate on I/O buffer to start the chain (throttling as necessary).
* We will not wait for an I/O buffer to become available in this context.
*/
iob = iob_tryalloc(true);
if (iob == NULL)
{
nerr("ERROR: Failed to create new I/O buffer chain\n");
return 0;
}
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv6(dev->d_flags))
#endif
{
FAR struct udp_hdr_s *udp = UDPIPv6BUF;
FAR struct ipv6_hdr_s *ipv6 = IPv6BUF;
src_addr6.sin6_family = AF_INET6;
src_addr6.sin6_port = udp->srcport;
net_ipv6addr_copy(src_addr6.sin6_addr.s6_addr, ipv6->srcipaddr);
src_addr_size = sizeof(src_addr6);
src_addr = &src_addr6;
}
#endif /* CONFIG_NET_IPv6 */
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
else
#endif
{
#ifdef CONFIG_NET_IPv6
/* Hybrid dual-stack IPv6/IPv4 implementations recognize a special
* class of addresses, the IPv4-mapped IPv6 addresses.
*/
if (conn->domain == PF_INET6)
{
FAR struct udp_hdr_s *udp = UDPIPv6BUF;
FAR struct ipv6_hdr_s *ipv6 = IPv6BUF;
in_addr_t ipv4addr;
/* Encode the IPv4 address as an IPv-mapped IPv6 address */
src_addr6.sin6_family = AF_INET6;
src_addr6.sin6_port = udp->srcport;
ipv4addr = net_ip4addr_conv32(ipv6->srcipaddr);
ip6_map_ipv4addr(ipv4addr, src_addr6.sin6_addr.s6_addr16);
src_addr_size = sizeof(src_addr6);
src_addr = &src_addr6;
}
else
#endif
{
FAR struct udp_hdr_s *udp = UDPIPv4BUF;
FAR struct ipv4_hdr_s *ipv4 = IPv4BUF;
src_addr4.sin_family = AF_INET;
src_addr4.sin_port = udp->srcport;
net_ipv4addr_copy(src_addr4.sin_addr.s_addr,
net_ip4addr_conv32(ipv4->srcipaddr));
src_addr_size = sizeof(src_addr4);
src_addr = &src_addr4;
}
}
#endif /* CONFIG_NET_IPv4 */
/* Copy the src address info into the I/O buffer chain. We will not wait
* for an I/O buffer to become available in this context. It there is
* any failure to allocated, the entire I/O buffer chain will be discarded.
*/
ret = iob_trycopyin(iob, (FAR const uint8_t *)&src_addr_size,
sizeof(uint8_t), 0, true);
if (ret < 0)
{
/* On a failure, iob_trycopyin return a negated error value but does
* not free any I/O buffers.
*/
nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret);
(void)iob_free_chain(iob);
return 0;
}
ret = iob_trycopyin(iob, (FAR const uint8_t *)src_addr, src_addr_size,
sizeof(uint8_t), true);
if (ret < 0)
{
/* On a failure, iob_trycopyin return a negated error value but does
* not free any I/O buffers.
*/
nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret);
(void)iob_free_chain(iob);
return 0;
}
if (buflen > 0)
{
/* Copy the new appdata into the I/O buffer chain */
ret = iob_trycopyin(iob, buffer, buflen,
src_addr_size + sizeof(uint8_t), true);
if (ret < 0)
{
/* On a failure, iob_trycopyin return a negated error value but
* does not free any I/O buffers.
*/
nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n",
ret);
(void)iob_free_chain(iob);
return 0;
}
}
/* Add the new I/O buffer chain to the tail of the read-ahead queue */
ret = iob_tryadd_queue(iob, &conn->readahead);
if (ret < 0)
{
nerr("ERROR: Failed to queue the I/O buffer chain: %d\n", ret);
(void)iob_free_chain(iob);
return 0;
}
#ifdef CONFIG_UDP_READAHEAD_NOTIFIER
/* Provided notification(s) that additional UDP read-ahead data is
* available.
*/
udp_notifier_signal(conn);
#endif
ninfo("Buffered %d bytes\n", buflen);
return buflen;
}
void arp_out(FAR struct net_driver_s *dev)
{
struct ether_addr ethaddr;
FAR struct eth_hdr_s *peth = ETHBUF;
FAR struct arp_iphdr_s *pip = IPBUF;
in_addr_t ipaddr;
in_addr_t destipaddr;
int ret;
#if defined(CONFIG_NET_PKT) || defined(CONFIG_NET_ARP_SEND)
/* Skip sending ARP requests when the frame to be transmitted was
* written into a packet socket.
*/
if (IFF_IS_NOARP(dev->d_flags))
{
/* Clear the indication and let the packet continue on its way. */
IFF_CLR_NOARP(dev->d_flags);
return;
}
#endif
/* Find the destination IP address in the ARP table and construct
* the Ethernet header. If the destination IP address isn't on the
* local network, we use the default router's IP address instead.
*
* If not ARP table entry is found, we overwrite the original IP
* packet with an ARP request for the IP address.
*/
/* First check if destination is a local broadcast. */
if (net_ipv4addr_hdrcmp(pip->eh_destipaddr, g_broadcast_ipaddr))
{
memcpy(peth->dest, g_broadcast_ethaddr.ether_addr_octet, ETHER_ADDR_LEN);
goto finish_header;
}
#ifdef CONFIG_NET_IGMP
/* Check if the destination address is a multicast address
*
* - IPv4: multicast addresses lie in the class D group -- The address range
* 224.0.0.0 to 239.255.255.255 (224.0.0.0/4)
*
* - IPv6 multicast addresses are have the high-order octet of the
* addresses=0xff (ff00::/8.)
*/
if (NTOHS(pip->eh_destipaddr[0]) >= 0xe000 &&
NTOHS(pip->eh_destipaddr[0]) <= 0xefff)
{
/* Build the well-known IPv4 IGMP Ethernet address. The first
* three bytes are fixed; the final three variable come from the
* last three bytes of the IPv4 address (network order).
*
* Address range : 01:00:5e:00:00:00 to 01:00:5e:7f:ff:ff
*/
FAR const uint8_t *ip = (FAR uint8_t *)pip->eh_destipaddr;
peth->dest[0] = g_multicast_ethaddr[0];
peth->dest[1] = g_multicast_ethaddr[1];
peth->dest[2] = g_multicast_ethaddr[2];
peth->dest[3] = ip[1] & 0x7f;
peth->dest[4] = ip[2];
peth->dest[5] = ip[3];
goto finish_header;
}
#endif
/* Check if the destination address is on the local network. */
destipaddr = net_ip4addr_conv32(pip->eh_destipaddr);
if (!net_ipv4addr_maskcmp(destipaddr, dev->d_ipaddr, dev->d_netmask))
{
/* Destination address is not on the local network */
#ifdef CONFIG_NET_ROUTE
/* We have a routing table.. find the correct router to use in
* this case (or, as a fall-back, use the device's default router
* address). We will use the router IP address instead of the
* destination address when determining the MAC address.
*/
netdev_ipv4_router(dev, destipaddr, &ipaddr);
#else
/* Use the device's default router IP address instead of the
* destination address when determining the MAC address.
*/
net_ipv4addr_copy(ipaddr, dev->d_draddr);
#endif
}
/* The destination address is on the local network. Check if it is
* the sub-net broadcast address.
*/
else if (net_ipv4addr_broadcast(destipaddr, dev->d_netmask))
{
/* Yes.. then we won't need to know the destination MAC address */
memcpy(peth->dest, g_broadcast_ethaddr.ether_addr_octet, ETHER_ADDR_LEN);
goto finish_header;
}
else
{
/* Else, we use the destination IP address. */
net_ipv4addr_copy(ipaddr, destipaddr);
}
/* Check if we already have this destination address in the ARP table */
ret = arp_find(ipaddr, ðaddr);
if (ret < 0)
{
ninfo("ARP request for IP %08lx\n", (unsigned long)ipaddr);
/* The destination address was not in our ARP table, so we overwrite
* the IP packet with an ARP request.
*/
arp_format(dev, ipaddr);
arp_dump(ARPBUF);
return;
}
/* Build an Ethernet header. */
memcpy(peth->dest, ethaddr.ether_addr_octet, ETHER_ADDR_LEN);
/* Finish populating the Ethernet header */
finish_header:
memcpy(peth->src, dev->d_mac.ether.ether_addr_octet, ETHER_ADDR_LEN);
peth->type = HTONS(ETHTYPE_IP);
dev->d_len += ETH_HDRLEN;
}
FAR struct tcp_conn_s *tcp_alloc_accept(FAR struct net_driver_s *dev,
FAR struct tcp_hdr_s *tcp)
{
FAR struct tcp_conn_s *conn;
uint8_t domain;
int ret;
/* Get the appropriate IP domain */
#if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv4)
bool ipv6 = IFF_IS_IPv6(dev->d_flags);
domain = ipv6 ? PF_INET6 : PF_INET;
#elif defined(CONFIG_NET_IPv4)
domain = PF_INET;
#else /* defined(CONFIG_NET_IPv6) */
domain = PF_INET6;
#endif
/* Allocate the connection structure */
conn = tcp_alloc(domain);
if (conn)
{
/* Set up the local address (laddr) and the remote address (raddr)
* that describes the TCP connection.
*/
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
if (ipv6)
#endif
{
FAR struct ipv6_hdr_s *ip = IPv6BUF;
/* Set the IPv6 specific MSS and the IPv6 locally bound address */
conn->mss = TCP_IPv6_INITIAL_MSS(dev);
net_ipv6addr_copy(conn->u.ipv6.raddr, ip->srcipaddr);
#ifdef CONFIG_NETDEV_MULTINIC
net_ipv6addr_copy(conn->u.ipv6.laddr, ip->destipaddr);
/* We now have to filter all outgoing transfers so that they use
* only the MSS of this device.
*/
DEBUGASSERT(conn->dev == NULL || conn->dev == dev);
conn->dev = dev;
#endif
/* Find the device that can receive packets on the network
* associated with this local address.
*/
ret = tcp_remote_ipv6_device(conn);
}
#endif /* CONFIG_NET_IPv6 */
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
else
#endif
{
FAR struct ipv4_hdr_s *ip = IPv4BUF;
/* Set the IPv6 specific MSS and the IPv4 bound remote address. */
conn->mss = TCP_IPv4_INITIAL_MSS(dev);
net_ipv4addr_copy(conn->u.ipv4.raddr,
net_ip4addr_conv32(ip->srcipaddr));
#ifdef CONFIG_NETDEV_MULTINIC
/* Set the local address as well */
net_ipv4addr_copy(conn->u.ipv4.laddr,
net_ip4addr_conv32(ip->destipaddr));
/* We now have to filter all outgoing transfers so that they use
* only the MSS of this device.
*/
DEBUGASSERT(conn->dev == NULL || conn->dev == dev);
conn->dev = dev;
#endif
/* Find the device that can receive packets on the network
* associated with this local address.
*/
ret = tcp_remote_ipv4_device(conn);
}
#endif /* CONFIG_NET_IPv4 */
/* Verify that a network device that can provide packets to this
* local address was found.
*/
if (ret < 0)
{
/* If no device is found, then the address is not reachable.
* That should be impossible in this context and we should
* probably really just assert here.
*/
nerr("ERROR: Failed to find network device: %d\n", ret);
tcp_free(conn);
return NULL;
}
/* Fill in the necessary fields for the new connection. */
conn->rto = TCP_RTO;
conn->timer = TCP_RTO;
conn->sa = 0;
conn->sv = 4;
conn->nrtx = 0;
conn->lport = tcp->destport;
conn->rport = tcp->srcport;
conn->tcpstateflags = TCP_SYN_RCVD;
tcp_initsequence(conn->sndseq);
conn->unacked = 1;
#ifdef CONFIG_NET_TCP_WRITE_BUFFERS
conn->expired = 0;
conn->isn = 0;
conn->sent = 0;
conn->sndseq_max = 0;
#endif
/* rcvseq should be the seqno from the incoming packet + 1. */
memcpy(conn->rcvseq, tcp->seqno, 4);
#ifdef CONFIG_NET_TCP_READAHEAD
/* Initialize the list of TCP read-ahead buffers */
IOB_QINIT(&conn->readahead);
#endif
#ifdef CONFIG_NET_TCP_WRITE_BUFFERS
/* Initialize the write buffer lists */
sq_init(&conn->write_q);
sq_init(&conn->unacked_q);
#endif
/* And, finally, put the connection structure into the active list.
* Interrupts should already be disabled in this context.
*/
dq_addlast(&conn->node, &g_active_tcp_connections);
}
return conn;
}
int tcp_connect(FAR struct tcp_conn_s *conn, FAR const struct sockaddr *addr)
{
int port;
int ret;
/* The connection is expected to be in the TCP_ALLOCATED state.. i.e.,
* allocated via up_tcpalloc(), but not yet put into the active connections
* list.
*/
if (!conn || conn->tcpstateflags != TCP_ALLOCATED)
{
return -EISCONN;
}
/* If the TCP port has not already been bound to a local port, then select
* one now. We assume that the IP address has been bound to a local device,
* but the port may still be INPORT_ANY.
*/
net_lock();
#ifdef CONFIG_NETDEV_MULTINIC
/* If there are multiple network devices, then we need to pass the local,
* bound address. This is needed because port unique-ness is only for a
* given network.
*
* This is complicated by the fact that the local address may be either an
* IPv4 or an IPv6 address.
*/
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (conn->domain == PF_INET)
#endif
{
/* Select a port that is unique for this IPv4 local address (host
* order).
*/
port = tcp_selectport(PF_INET,
(FAR const union ip_addr_u *)&conn->u.ipv4.laddr,
ntohs(conn->lport));
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
/* Select a port that is unique for this IPv6 local address (host
* order).
*/
port = tcp_selectport(PF_INET6,
(FAR const union ip_addr_u *)conn->u.ipv6.laddr,
ntohs(conn->lport));
}
#endif /* CONFIG_NET_IPv6 */
#else /* CONFIG_NETDEV_MULTINIC */
/* Select the next available port number. This is only one network device
* so we do not have to bother with all of the IPv4/IPv6 local address
* silliness.
*/
port = tcp_selectport(ntohs(conn->lport));
#endif /* CONFIG_NETDEV_MULTINIC */
/* Did we have a port assignment? */
if (port < 0)
{
ret = port;
goto errout_with_lock;
}
/* Set up the local address (laddr) and the remote address (raddr) that
* describes the TCP connection.
*/
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (conn->domain == PF_INET)
#endif
{
FAR const struct sockaddr_in *inaddr =
(FAR const struct sockaddr_in *)addr;
/* Save MSS and the port from the sockaddr (already in network order) */
conn->mss = MIN_IPv4_TCP_INITIAL_MSS;
conn->rport = inaddr->sin_port;
/* The sockaddr address is 32-bits in network order. */
net_ipv4addr_copy(conn->u.ipv4.raddr, inaddr->sin_addr.s_addr);
/* Find the device that can receive packets on the network associated
* with this remote address.
*/
ret = tcp_remote_ipv4_device(conn);
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
FAR const struct sockaddr_in6 *inaddr =
(FAR const struct sockaddr_in6 *)addr;
/* Save MSS and the port from the sockaddr (already in network order) */
conn->mss = MIN_IPv6_TCP_INITIAL_MSS;
conn->rport = inaddr->sin6_port;
/* The sockaddr address is 128-bits in network order. */
net_ipv6addr_copy(conn->u.ipv6.raddr, inaddr->sin6_addr.s6_addr16);
/* Find the device that can receive packets on the network associated
* with this local address.
*/
ret = tcp_remote_ipv6_device(conn);
}
#endif /* CONFIG_NET_IPv6 */
/* Verify that a network device that can provide packets to this local
* address was found.
*/
if (ret < 0)
{
/* If no device is found, then the address is not reachable. That
* should be impossible in this context and we should probably really
* just assert here.
*/
nerr("ERROR: Failed to find network device: %d\n", ret);
goto errout_with_lock;
}
/* Initialize and return the connection structure, bind it to the port
* number. At this point, we do not know the size of the initial MSS We
* know the total size of the packet buffer, but we don't yet know the
* size of link layer header.
*/
conn->tcpstateflags = TCP_SYN_SENT;
tcp_initsequence(conn->sndseq);
conn->unacked = 1; /* TCP length of the SYN is one. */
conn->nrtx = 0;
conn->timer = 1; /* Send the SYN next time around. */
conn->rto = TCP_RTO;
conn->sa = 0;
conn->sv = 16; /* Initial value of the RTT variance. */
conn->lport = htons((uint16_t)port);
#ifdef CONFIG_NET_TCP_WRITE_BUFFERS
conn->expired = 0;
conn->isn = 0;
conn->sent = 0;
conn->sndseq_max = 0;
#endif
#ifdef CONFIG_NET_TCP_READAHEAD
/* Initialize the list of TCP read-ahead buffers */
IOB_QINIT(&conn->readahead);
#endif
#ifdef CONFIG_NET_TCP_WRITE_BUFFERS
/* Initialize the TCP write buffer lists */
sq_init(&conn->write_q);
sq_init(&conn->unacked_q);
#endif
/* And, finally, put the connection structure into the active list. */
dq_addlast(&conn->node, &g_active_tcp_connections);
ret = OK;
errout_with_lock:
net_unlock();
return ret;
}
