static int core_tcp_listen(nc_sock_t *ncsock)
{
int sock_listen, sock_accept, timeout = ncsock->timeout;
debug_v(("core_tcp_listen(ncsock=%p)", (void *)ncsock));
sock_listen = netcat_socket_new_listen(PF_INET, &ncsock->local_host.iaddrs[0],
ncsock->local_port.netnum);
if (sock_listen < 0)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Couldn't setup listening socket (err=%d)"), sock_listen);
/* if the port was set to 0 this means that it is assigned randomly by the
OS. Find out which port they assigned to us. */
if (ncsock->local_port.num == 0) {
int ret;
struct sockaddr_in myaddr;
unsigned int myaddr_len = sizeof(myaddr);
ret = getsockname(sock_listen, (struct sockaddr *)&myaddr, &myaddr_len);
if (ret < 0) {
close(sock_listen);
return -1;
}
netcat_getport(&ncsock->local_port, NULL, ntohs(myaddr.sin_port));
}
ncprint(NCPRINT_VERB2, _("Listening on %s"),
netcat_strid(&ncsock->local_host, &ncsock->local_port));
while (TRUE) {
struct sockaddr_in my_addr;
unsigned int my_len = sizeof(my_addr); /* this *IS* socklen_t */
sock_accept = netcat_socket_accept(sock_listen, timeout);
/* reset the timeout to the "use remaining time" value (see network.c file)
if it exited with timeout we also return this function, so losing the
original value is not a bad thing. */
timeout = -1;
/* failures in netcat_socket_accept() cause this function to return */
if (sock_accept < 0)
return -1;
/* FIXME: i want a library function like netcat_peername() that fetches it
and resolves with netcat_resolvehost(). */
getpeername(sock_accept, (struct sockaddr *)&my_addr, &my_len);
/* if a remote address (and optionally some ports) have been specified we
assume it as the only ip and port that it is allowed to connect to
this socket */
if ((ncsock->host.iaddrs[0].s_addr && memcmp(&ncsock->host.iaddrs[0],
&my_addr.sin_addr, sizeof(ncsock->host.iaddrs[0]))) ||
(netcat_flag_count() && !netcat_flag_get(ntohs(my_addr.sin_port)))) {
ncprint(NCPRINT_VERB2, _("Unwanted connection from %s:%hu (refused)"),
netcat_inet_ntop(&my_addr.sin_addr), ntohs(my_addr.sin_port));
goto refuse;
}
ncprint(NCPRINT_VERB1, _("Connection from %s:%hu"),
netcat_inet_ntop(&my_addr.sin_addr), ntohs(my_addr.sin_port));
/* with zero I/O mode we don't really accept any connection */
if (opt_zero)
goto refuse;
/* we have got our socket, now exit the loop */
break;
refuse:
shutdown(sock_accept, 2);
close(sock_accept);
continue;
} /* end of infinite accepting loop */
/* we don't need a listening socket anymore */
close(sock_listen);
return sock_accept;
} /* end of core_tcp_listen() */
int main(int argc, char *argv[])
{
int c, glob_ret = EXIT_FAILURE;
int total_ports, left_ports, accept_ret = -1, connect_ret = -1;
struct sigaction sv;
nc_port_t local_port; /* local port specified with -p option */
nc_host_t local_host; /* local host for bind()ing operations */
nc_host_t remote_host;
nc_sock_t listen_sock;
nc_sock_t connect_sock;
nc_sock_t stdio_sock;
memset(&local_port, 0, sizeof(local_port));
memset(&local_host, 0, sizeof(local_host));
memset(&remote_host, 0, sizeof(remote_host));
memset(&listen_sock, 0, sizeof(listen_sock));
memset(&connect_sock, 0, sizeof(listen_sock));
memset(&stdio_sock, 0, sizeof(stdio_sock));
listen_sock.domain = PF_INET;
connect_sock.domain = PF_INET;
#ifdef ENABLE_NLS
setlocale(LC_MESSAGES, "");
bindtextdomain(PACKAGE, LOCALEDIR);
textdomain(PACKAGE);
#endif
/* set up the signal handling system */
sigemptyset(&sv.sa_mask);
sv.sa_flags = 0;
sv.sa_handler = got_int;
sigaction(SIGINT, &sv, NULL);
sv.sa_handler = got_term;
sigaction(SIGTERM, &sv, NULL);
sv.sa_handler = got_usr1;
sigaction(SIGUSR1, &sv, NULL);
/* ignore some boring signals */
sv.sa_handler = SIG_IGN;
sigaction(SIGPIPE, &sv, NULL);
sigaction(SIGURG, &sv, NULL);
/* if no args given at all, take them from stdin and generate argv */
if (argc == 1)
netcat_commandline_read(&argc, &argv);
/* check for command line switches */
while (TRUE) {
int option_index = 0;
static const struct option long_options[] = {
{ "close", no_argument, NULL, 'c' },
{ "debug", no_argument, NULL, 'd' },
{ "exec", required_argument, NULL, 'e' },
{ "gateway", required_argument, NULL, 'g' },
{ "pointer", required_argument, NULL, 'G' },
{ "help", no_argument, NULL, 'h' },
{ "interval", required_argument, NULL, 'i' },
{ "listen", no_argument, NULL, 'l' },
{ "tunnel", required_argument, NULL, 'L' },
{ "dont-resolve", no_argument, NULL, 'n' },
{ "output", required_argument, NULL, 'o' },
{ "local-port", required_argument, NULL, 'p' },
{ "tunnel-port", required_argument, NULL, 'P' },
{ "randomize", no_argument, NULL, 'r' },
{ "source", required_argument, NULL, 's' },
{ "tunnel-source", required_argument, NULL, 'S' },
#ifndef USE_OLD_COMPAT
{ "tcp", no_argument, NULL, 't' },
{ "telnet", no_argument, NULL, 'T' },
#else
{ "tcp", no_argument, NULL, 1 },
{ "telnet", no_argument, NULL, 't' },
#endif
{ "udp", no_argument, NULL, 'u' },
{ "verbose", no_argument, NULL, 'v' },
{ "version", no_argument, NULL, 'V' },
{ "hexdump", no_argument, NULL, 'x' },
{ "wait", required_argument, NULL, 'w' },
{ "zero", no_argument, NULL, 'z' },
{ 0, 0, 0, 0 }
};
c = getopt_long(argc, argv, "cde:g:G:hi:lL:no:p:P:rs:S:tTuvVxw:z",
long_options, &option_index);
if (c == -1)
break;
switch (c) {
case 'c': /* close connection on EOF from stdin */
opt_eofclose = TRUE;
break;
case 'd': /* enable debugging */
opt_debug = TRUE;
break;
case 'e': /* prog to exec */
if (opt_exec)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Cannot specify `-e' option double"));
opt_exec = strdup(optarg);
break;
case 'G': /* srcrt gateways pointer val */
break;
case 'g': /* srcroute hop[s] */
break;
case 'h': /* display help and exit */
netcat_printhelp(argv[0]);
exit(EXIT_SUCCESS);
case 'i': /* line/ports interval time (seconds) */
opt_interval = atoi(optarg);
if (opt_interval <= 0)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Invalid interval time \"%s\""), optarg);
break;
case 'l': /* mode flag: listen mode */
if (netcat_mode != NETCAT_UNSPEC)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("You can specify mode flags (`-l' and `-L') only once"));
netcat_mode = NETCAT_LISTEN;
break;
case 'L': /* mode flag: tunnel mode */
if (netcat_mode != NETCAT_UNSPEC)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("You can specify mode flags (`-l' and `-L') only once"));
if (opt_zero)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("`-L' and `-z' options are incompatible"));
do {
char *div = strchr(optarg, ':');
if (div && *(div + 1))
*div++ = '\0';
else
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Invalid target string for `-L' option"));
/* lookup the remote address and the remote port for tunneling */
if (!netcat_resolvehost(&connect_sock.host, optarg))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Couldn't resolve tunnel target host: %s"), optarg);
if (!netcat_getport(&connect_sock.port, div, 0))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Invalid tunnel target port: %s"), div);
connect_sock.proto = opt_proto;
connect_sock.timeout = opt_wait;
netcat_mode = NETCAT_TUNNEL;
} while (FALSE);
break;
case 'n': /* numeric-only, no DNS lookups */
opt_numeric = TRUE;
break;
case 'o': /* output hexdump log to file */
opt_outputfile = strdup(optarg);
opt_hexdump = TRUE; /* implied */
break;
case 'p': /* local source port */
if (!netcat_getport(&local_port, optarg, 0))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT, _("Invalid local port: %s"),
optarg);
break;
case 'P': /* used only in tunnel mode (source port) */
if (!netcat_getport(&connect_sock.local_port, optarg, 0))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Invalid tunnel connect port: %s"), optarg);
break;
case 'r': /* randomize various things */
opt_random = TRUE;
break;
case 's': /* local source address */
/* lookup the source address and assign it to the connection address */
if (!netcat_resolvehost(&local_host, optarg))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Couldn't resolve local host: %s"), optarg);
break;
case 'S': /* used only in tunnel mode (source ip) */
if (!netcat_resolvehost(&connect_sock.local_host, optarg))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("Couldn't resolve tunnel local host: %s"), optarg);
break;
case 1: /* use TCP protocol (default) */
#ifndef USE_OLD_COMPAT
case 't':
#endif
opt_proto = NETCAT_PROTO_TCP;
break;
#ifdef USE_OLD_COMPAT
case 't':
#endif
case 'T': /* answer telnet codes */
opt_telnet = TRUE;
break;
case 'u': /* use UDP protocol */
opt_proto = NETCAT_PROTO_UDP;
break;
case 'v': /* be verbose (twice=more verbose) */
opt_verbose++;
break;
case 'V': /* display version and exit */
netcat_printversion();
exit(EXIT_SUCCESS);
case 'w': /* wait time (in seconds) */
opt_wait = atoi(optarg);
if (opt_wait <= 0)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT, _("Invalid wait-time: %s"),
optarg);
break;
case 'x': /* hexdump traffic */
opt_hexdump = TRUE;
break;
case 'z': /* little or no data xfer */
if (netcat_mode == NETCAT_TUNNEL)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("`-L' and `-z' options are incompatible"));
opt_zero = TRUE;
break;
default:
ncprint(NCPRINT_EXIT, _("Try `%s --help' for more information."), argv[0]);
}
}
if (opt_zero && opt_exec)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("`-e' and `-z' options are incompatible"));
/* initialize the flag buffer to keep track of the specified ports */
netcat_flag_init(65535);
#ifndef DEBUG
/* check for debugging support */
if (opt_debug)
ncprint(NCPRINT_WARNING,
_("Debugging support not compiled, option `-d' discarded. Using maximum verbosity."));
#endif
/* randomize only if needed */
if (opt_random)
#ifdef USE_RANDOM
SRAND(time(0));
#else
ncprint(NCPRINT_WARNING,
_("Randomization support not compiled, option `-r' discarded."));
#endif
/* handle the -o option. exit on failure */
if (opt_outputfile) {
output_fp = fopen(opt_outputfile, "w");
if (!output_fp)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT, _("Failed to open output file: %s"),
strerror(errno));
}
else
output_fp = stderr;
debug_v(("Trying to parse non-args parameters (argc=%d, optind=%d)", argc,
optind));
/* try to get an hostname parameter */
if (optind < argc) {
char *myhost = argv[optind++];
if (!netcat_resolvehost(&remote_host, myhost))
ncprint(NCPRINT_ERROR | NCPRINT_EXIT, _("Couldn't resolve host \"%s\""),
myhost);
}
/* now loop all the other (maybe optional) parameters for port-ranges */
while (optind < argc) {
const char *get_argv = argv[optind++];
char *q, *parse = strdup(get_argv);
int port_lo = 0, port_hi = 65535;
nc_port_t port_tmp;
if (!(q = strchr(parse, '-'))) /* simple number? */
q = strchr(parse, ':'); /* try with the other separator */
if (!q) {
if (netcat_getport(&port_tmp, parse, 0))
netcat_flag_set(port_tmp.num, TRUE);
else
goto got_err;
}
else { /* could be in the forms: N1-N2, -N2, N1- */
*q++ = 0;
if (*parse) {
if (netcat_getport(&port_tmp, parse, 0))
port_lo = port_tmp.num;
else
goto got_err;
}
if (*q) {
if (netcat_getport(&port_tmp, q, 0))
port_hi = port_tmp.num;
else
goto got_err;
}
if (!*parse && !*q) /* don't accept the form '-' */
goto got_err;
/* now update the flagset (this is int, so it's ok even if hi == 65535) */
while (port_lo <= port_hi)
netcat_flag_set(port_lo++, TRUE);
}
free(parse);
continue;
got_err:
free(parse);
ncprint(NCPRINT_ERROR, _("Invalid port specification: %s"), get_argv);
exit(EXIT_FAILURE);
}
debug_dv(("Arguments parsing complete! Total ports=%d", netcat_flag_count()));
#if 0
/* pure debugging code */
c = 0;
while ((c = netcat_flag_next(c))) {
printf("Got port=%d\n", c);
}
exit(0);
#endif
/* Handle listen mode and tunnel mode (whose index number is higher) */
if (netcat_mode > NETCAT_CONNECT) {
/* in tunnel mode the opt_zero flag is illegal, while on listen mode it
means that no connections should be accepted. For UDP it means that
no remote addresses should be used as default endpoint, which means
that we can't send anything. In both situations, stdin is no longer
useful, so close it. */
if (opt_zero) {
close(STDIN_FILENO);
use_stdin = FALSE;
}
/* prepare the socket var and start listening */
listen_sock.proto = opt_proto;
listen_sock.timeout = opt_wait;
memcpy(&listen_sock.local_host, &local_host, sizeof(listen_sock.local_host));
memcpy(&listen_sock.local_port, &local_port, sizeof(listen_sock.local_port));
memcpy(&listen_sock.host, &remote_host, sizeof(listen_sock.host));
accept_ret = core_listen(&listen_sock);
/* in zero I/O mode the core_tcp_listen() call will always return -1
(ETIMEDOUT) since no connections are accepted, because of this our job
is completed now. */
if (accept_ret < 0) {
/* since i'm planning to make `-z' compatible with `-L' I need to check
the exact error that caused this failure. */
if (opt_zero && (errno == ETIMEDOUT))
exit(0);
ncprint(NCPRINT_VERB1 | NCPRINT_EXIT, _("Listen mode failed: %s"),
strerror(errno));
}
/* if we are in listen mode, run the core loop and exit when it returns.
otherwise now it's the time to connect to the target host and tunnel
them together (which means passing to the next section. */
if (netcat_mode == NETCAT_LISTEN) {
if (opt_exec) {
ncprint(NCPRINT_VERB2, _("Passing control to the specified program"));
ncexec(&listen_sock); /* this won't return */
}
core_readwrite(&listen_sock, &stdio_sock);
debug_dv(("Listen: EXIT"));
}
else {
/* otherwise we are in tunnel mode. The connect_sock var was already
initialized by the command line arguments. */
assert(netcat_mode == NETCAT_TUNNEL);
connect_ret = core_connect(&connect_sock);
/* connection failure? (we cannot get this in UDP mode) */
if (connect_ret < 0) {
assert(opt_proto != NETCAT_PROTO_UDP);
ncprint(NCPRINT_VERB1, "%s: %s",
netcat_strid(&connect_sock.host, &connect_sock.port),
strerror(errno));
}
else {
glob_ret = EXIT_SUCCESS;
core_readwrite(&listen_sock, &connect_sock);
debug_dv(("Tunnel: EXIT (ret=%d)", glob_ret));
}
}
/* all jobs should be ok, go to the cleanup */
goto main_exit;
} /* end of listen and tunnel mode handling */
/* we need to connect outside, this is the connect mode */
netcat_mode = NETCAT_CONNECT;
/* first check that a host parameter was given */
if (!remote_host.iaddrs[0].s_addr) {
/* FIXME: The Networking specifications state that host address "0" is a
valid host to connect to but this broken check will assume as not
specified. */
ncprint(NCPRINT_NORMAL, _("%s: missing hostname argument"), argv[0]);
ncprint(NCPRINT_EXIT, _("Try `%s --help' for more information."), argv[0]);
}
/* since ports are the second argument, checking ports might be enough */
total_ports = netcat_flag_count();
if (total_ports == 0)
ncprint(NCPRINT_ERROR | NCPRINT_EXIT,
_("No ports specified for connection"));
c = 0; /* must be set to 0 for netcat_flag_next() */
left_ports = total_ports;
while (left_ports > 0) {
/* `c' is the port number independently of the sorting method (linear
or random). While in linear mode it is also used to fetch the next
port number */
if (opt_random)
c = netcat_flag_rand();
else
c = netcat_flag_next(c);
left_ports--; /* decrease the total ports number to try */
/* since we are nonblocking now, we can start as many connections as we want
but it's not a great idea connecting more than one host at time */
connect_sock.proto = opt_proto;
connect_sock.timeout = opt_wait;
memcpy(&connect_sock.local_host, &local_host,
sizeof(connect_sock.local_host));
memcpy(&connect_sock.local_port, &local_port,
sizeof(connect_sock.local_port));
memcpy(&connect_sock.host, &remote_host, sizeof(connect_sock.host));
netcat_getport(&connect_sock.port, NULL, c);
/* FIXME: in udp mode and NETCAT_CONNECT, opt_zero is senseless */
connect_ret = core_connect(&connect_sock);
/* connection failure? (we cannot get this in UDP mode) */
if (connect_ret < 0) {
int ncprint_flags = NCPRINT_VERB1;
assert(connect_sock.proto != NETCAT_PROTO_UDP);
/* if we are portscanning or multiple connecting show only open
ports with verbosity level 1. */
if (total_ports > 1)
ncprint_flags = NCPRINT_VERB2;
ncprint(ncprint_flags, "%s: %s",
netcat_strid(&connect_sock.host, &connect_sock.port),
strerror(errno));
continue; /* go with next port */
}
/* when portscanning (or checking a single port) we are happy if AT LEAST
ONE port is available. */
glob_ret = EXIT_SUCCESS;
if (opt_zero) {
shutdown(connect_ret, 2);
close(connect_ret);
}
else {
if (opt_exec) {
ncprint(NCPRINT_VERB2, _("Passing control to the specified program"));
ncexec(&connect_sock); /* this won't return */
}
core_readwrite(&connect_sock, &stdio_sock);
/* FIXME: add a small delay */
debug_v(("Connect: EXIT"));
/* both signals are handled inside core_readwrite(), but while the
SIGINT signal is fully handled, the SIGTERM requires some action
from outside that function, because of this that flag is not
cleared. */
if (got_sigterm)
break;
}
} /* end of while (left_ports > 0) */
/* all basic modes should return here for the final cleanup */
main_exit:
debug_v(("Main: EXIT (cleaning up)"));
netcat_printstats(FALSE);
return glob_ret;
} /* end of main() */