/**
* stmmac_change_mtu - entry point to change MTU size for the device.
* @dev : device pointer.
* @new_mtu : the new MTU size for the device.
* Description: the Maximum Transfer Unit (MTU) is used by the network layer
* to drive packet transmission. Ethernet has an MTU of 1500 octets
* (ETH_DATA_LEN). This value can be changed with ifconfig.
* Return value:
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
{
struct stmmac_priv *priv = netdev_priv(dev);
int max_mtu;
if (netif_running(dev)) {
pr_err("%s: must be stopped to change its MTU\n", dev->name);
return -EBUSY;
}
if (priv->plat->has_gmac)
max_mtu = JUMBO_LEN;
else
max_mtu = ETH_DATA_LEN;
if ((new_mtu < 46) || (new_mtu > max_mtu)) {
pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
return -EINVAL;
}
dev->mtu = new_mtu;
netdev_update_features(dev);
return 0;
}
void hsr_del_port(struct hsr_port *port)
{
struct hsr_priv *hsr;
struct hsr_port *master;
hsr = port->hsr;
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
list_del_rcu(&port->port_list);
if (port != master) {
if (master != NULL) {
netdev_update_features(master->dev);
dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
}
netdev_rx_handler_unregister(port->dev);
dev_set_promiscuity(port->dev, -1);
}
/* FIXME?
* netdev_upper_dev_unlink(port->dev, port->hsr->dev);
*/
synchronize_rcu();
if (port != master)
dev_put(port->dev);
}
static void macvtap_update_features(struct tap_dev *tap,
netdev_features_t features)
{
struct macvtap_dev *vlantap = container_of(tap, struct macvtap_dev, tap);
struct macvlan_dev *vlan = &vlantap->vlan;
vlan->set_features = features;
netdev_update_features(vlan->dev);
}
void
nfp_repr_transfer_features(struct net_device *netdev, struct net_device *lower)
{
struct nfp_repr *repr = netdev_priv(netdev);
if (repr->dst->u.port_info.lower_dev != lower)
return;
netdev->gso_max_size = lower->gso_max_size;
netdev->gso_max_segs = lower->gso_max_segs;
netdev_update_features(netdev);
}
static void vlan_transfer_features(struct net_device *dev,
struct net_device *vlandev)
{
vlandev->gso_max_size = dev->gso_max_size;
if (dev->features & NETIF_F_HW_VLAN_TX)
vlandev->hard_header_len = dev->hard_header_len;
else
vlandev->hard_header_len = dev->hard_header_len + VLAN_HLEN;
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
#endif
netdev_update_features(vlandev);
}
static void vlan_transfer_features(struct net_device *dev,
struct net_device *vlandev)
{
struct vlan_dev_priv *vlan = vlan_dev_priv(vlandev);
vlandev->gso_max_size = dev->gso_max_size;
if (vlan_hw_offload_capable(dev->features, vlan->vlan_proto))
vlandev->hard_header_len = dev->hard_header_len;
else
vlandev->hard_header_len = dev->hard_header_len + VLAN_HLEN;
#if IS_ENABLED(CONFIG_FCOE)
vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
#endif
netdev_update_features(vlandev);
}
int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
enum hsr_port_type type)
{
struct hsr_port *port, *master;
int res;
if (type != HSR_PT_MASTER) {
res = hsr_check_dev_ok(dev);
if (res)
return res;
}
port = hsr_port_get_hsr(hsr, type);
if (port != NULL)
return -EBUSY; /* This port already exists */
port = kzalloc(sizeof(*port), GFP_KERNEL);
if (port == NULL)
return -ENOMEM;
if (type != HSR_PT_MASTER) {
res = hsr_portdev_setup(dev, port);
if (res)
goto fail_dev_setup;
}
port->hsr = hsr;
port->dev = dev;
port->type = type;
list_add_tail_rcu(&port->port_list, &hsr->ports);
synchronize_rcu();
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
netdev_update_features(master->dev);
dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
return 0;
fail_dev_setup:
kfree(port);
return res;
}
static int bnxt_set_channels(struct net_device *dev,
struct ethtool_channels *channel)
{
struct bnxt *bp = netdev_priv(dev);
int max_rx_rings, max_tx_rings, tcs;
u32 rc = 0;
bool sh = false;
if (channel->other_count)
return -EINVAL;
if (!channel->combined_count &&
(!channel->rx_count || !channel->tx_count))
return -EINVAL;
if (channel->combined_count &&
(channel->rx_count || channel->tx_count))
return -EINVAL;
if (channel->combined_count)
sh = true;
bnxt_get_max_rings(bp, &max_rx_rings, &max_tx_rings, sh);
tcs = netdev_get_num_tc(dev);
if (tcs > 1)
max_tx_rings /= tcs;
if (sh && (channel->combined_count > max_rx_rings ||
channel->combined_count > max_tx_rings))
return -ENOMEM;
if (!sh && (channel->rx_count > max_rx_rings ||
channel->tx_count > max_tx_rings))
return -ENOMEM;
if (netif_running(dev)) {
if (BNXT_PF(bp)) {
/* TODO CHIMP_FW: Send message to all VF's
* before PF unload
*/
}
rc = bnxt_close_nic(bp, true, false);
if (rc) {
netdev_err(bp->dev, "Set channel failure rc :%x\n",
rc);
return rc;
}
}
if (sh) {
bp->flags |= BNXT_FLAG_SHARED_RINGS;
bp->rx_nr_rings = channel->combined_count;
bp->tx_nr_rings_per_tc = channel->combined_count;
} else {
bp->flags &= ~BNXT_FLAG_SHARED_RINGS;
bp->rx_nr_rings = channel->rx_count;
bp->tx_nr_rings_per_tc = channel->tx_count;
}
bp->tx_nr_rings = bp->tx_nr_rings_per_tc;
if (tcs > 1)
bp->tx_nr_rings = bp->tx_nr_rings_per_tc * tcs;
bp->cp_nr_rings = sh ? max_t(int, bp->tx_nr_rings, bp->rx_nr_rings) :
bp->tx_nr_rings + bp->rx_nr_rings;
bp->num_stat_ctxs = bp->cp_nr_rings;
/* After changing number of rx channels, update NTUPLE feature. */
netdev_update_features(dev);
if (netif_running(dev)) {
rc = bnxt_open_nic(bp, true, false);
if ((!rc) && BNXT_PF(bp)) {
/* TODO CHIMP_FW: Send message to all VF's
* to renable
*/
}
}
return rc;
}
/**
* stmmac_open - open entry point of the driver
* @dev : pointer to the device structure.
* Description:
* This function is the open entry point of the driver.
* Return value:
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
static int stmmac_open(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
/* Check that the MAC address is valid. If its not, refuse
* to bring the device up. The user must specify an
* address using the following linux command:
* ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */
if (!is_valid_ether_addr(dev->dev_addr)) {
random_ether_addr(dev->dev_addr);
pr_warning("%s: generated random MAC address %pM\n", dev->name,
dev->dev_addr);
}
stmmac_verify_args();
#ifdef CONFIG_STMMAC_TIMER
priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
if (unlikely(priv->tm == NULL)) {
pr_err("%s: ERROR: timer memory alloc failed\n", __func__);
return -ENOMEM;
}
priv->tm->freq = tmrate;
/* Test if the external timer can be actually used.
* In case of failure continue without timer. */
if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
pr_warning("stmmaceth: cannot attach the external timer.\n");
priv->tm->freq = 0;
priv->tm->timer_start = stmmac_no_timer_started;
priv->tm->timer_stop = stmmac_no_timer_stopped;
} else
priv->tm->enable = 1;
#endif
ret = stmmac_init_phy(dev);
if (unlikely(ret)) {
pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
goto open_error;
}
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
init_dma_desc_rings(dev);
/* DMA initialization and SW reset */
ret = priv->hw->dma->init(priv->ioaddr, priv->plat->pbl,
priv->dma_tx_phy, priv->dma_rx_phy);
if (ret < 0) {
pr_err("%s: DMA initialization failed\n", __func__);
goto open_error;
}
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
/* If required, perform hw setup of the bus. */
if (priv->plat->bus_setup)
priv->plat->bus_setup(priv->ioaddr);
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
if (priv->rx_coe)
pr_info("stmmac: Rx Checksum Offload Engine supported\n");
if (priv->plat->tx_coe)
pr_info("\tTX Checksum insertion supported\n");
netdev_update_features(dev);
/* Initialise the MMC (if present) to disable all interrupts. */
writel(0xffffffff, priv->ioaddr + MMC_HIGH_INTR_MASK);
writel(0xffffffff, priv->ioaddr + MMC_LOW_INTR_MASK);
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
__func__, dev->irq, ret);
goto open_error;
}
/* Enable the MAC Rx/Tx */
stmmac_enable_mac(priv->ioaddr);
/* Set the HW DMA mode and the COE */
stmmac_dma_operation_mode(priv);
/* Extra statistics */
memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
priv->xstats.threshold = tc;
/* Start the ball rolling... */
DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
priv->hw->dma->start_tx(priv->ioaddr);
priv->hw->dma->start_rx(priv->ioaddr);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_start(tmrate);
#endif
/* Dump DMA/MAC registers */
if (netif_msg_hw(priv)) {
priv->hw->mac->dump_regs(priv->ioaddr);
priv->hw->dma->dump_regs(priv->ioaddr);
}
if (priv->phydev)
phy_start(priv->phydev);
napi_enable(&priv->napi);
skb_queue_head_init(&priv->rx_recycle);
netif_start_queue(dev);
return 0;
open_error:
#ifdef CONFIG_STMMAC_TIMER
kfree(priv->tm);
#endif
if (priv->phydev)
phy_disconnect(priv->phydev);
return ret;
}
/*
* Handle changes in state of network devices enslaved to a bridge.
*
* Note: don't care about up/down if bridge itself is down, because
* port state is checked when bridge is brought up.
*/
static int br_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct net_bridge_port *p;
struct net_bridge *br;
bool changed_addr;
int err;
/* register of bridge completed, add sysfs entries */
if ((dev->priv_flags & IFF_EBRIDGE) && event == NETDEV_REGISTER) {
br_sysfs_addbr(dev);
return NOTIFY_DONE;
}
/* not a port of a bridge */
p = br_port_get_rtnl(dev);
if (!p)
return NOTIFY_DONE;
br = p->br;
switch (event) {
case NETDEV_CHANGEMTU:
dev_set_mtu(br->dev, br_min_mtu(br));
break;
case NETDEV_CHANGEADDR:
spin_lock_bh(&br->lock);
br_fdb_changeaddr(p, dev->dev_addr);
changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
break;
case NETDEV_CHANGE:
br_port_carrier_check(p);
break;
case NETDEV_FEAT_CHANGE:
netdev_update_features(br->dev);
break;
case NETDEV_DOWN:
spin_lock_bh(&br->lock);
if (br->dev->flags & IFF_UP)
br_stp_disable_port(p);
spin_unlock_bh(&br->lock);
break;
case NETDEV_UP:
if (netif_running(br->dev) && netif_oper_up(dev)) {
spin_lock_bh(&br->lock);
br_stp_enable_port(p);
spin_unlock_bh(&br->lock);
}
break;
case NETDEV_UNREGISTER:
br_del_if(br, dev);
break;
case NETDEV_CHANGENAME:
err = br_sysfs_renameif(p);
if (err)
return notifier_from_errno(err);
break;
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
return NOTIFY_BAD;
case NETDEV_RESEND_IGMP:
/* Propagate to master device */
call_netdevice_notifiers(event, br->dev);
break;
}
/* Events that may cause spanning tree to refresh */
if (event == NETDEV_CHANGEADDR || event == NETDEV_UP ||
event == NETDEV_CHANGE || event == NETDEV_DOWN)
br_ifinfo_notify(RTM_NEWLINK, p);
return NOTIFY_DONE;
}
