void MainWindow::connectSignals() {
//connect command buttons
connect(s_button.addCurve,SIGNAL(clicked()),SLOT(newCurve()));
connect(s_button.removeCurve,SIGNAL(clicked()),SLOT(removeCurve()));
connect(s_button.duplicateCurves,SIGNAL(clicked()),SLOT(duplicateCurves()));
#ifdef COMPLETE_FAST_SELECTION
connect(s_button.removeAllCurves,SIGNAL(clicked()),SLOT(removeAllCurvesWithDialog()));
connect(s_button.exportDigest,SIGNAL(clicked()),SLOT(exportDigestCurve()));
connect(s_button.exportXML ,SIGNAL(clicked()),SLOT(exportXML()));
connect(s_button.importXML,SIGNAL(clicked()),SLOT(importXML()));
connect(s_button.showXML ,SIGNAL(clicked()),SLOT(showXML()));
#endif
//If the sample rate change i need to reset the audio stream
// connect(m_plotTime->getDigestCurve(),SIGNAL(sampleRateChanged(qreal)),this,SLOT(sampleRateChange(qreal)));
//connect digest curve to handle update in the plots
Q_ASSERT(connect(m_plotTime->getDigestCurve(),SIGNAL(dataChanged()),this,SLOT(digestCurveChanged())));
//Connect position slider
Q_ASSERT(connect(m_audioPlayer,SIGNAL(streamTimePositionChanged(qreal)) ,this,SLOT(streamPositionUpdate(qreal))));
}
PlotControlWindow::PlotControlWindow(const int plotId, PlotArea *parent) :
QMainWindow(parent),
ui(new Ui::PlotControlWindow)
{
ui->setupUi(this);
mPlot = parent->getPlotWidget();
mPlotId = plotId;
init();
initFromConfig();
// Dialog
connect(this->ui->buttonBox, SIGNAL(accepted()), this, SLOT(accept()));
connect(this->ui->buttonBox, SIGNAL(accepted()), this, SLOT(close()));
connect(this->ui->buttonBox, SIGNAL(accepted()), parent, SLOT(plotConfigChanged()));
connect(this->ui->buttonBox, SIGNAL(rejected()), this, SLOT(close()));
QPushButton* applyButton = ui->buttonBox->button(QDialogButtonBox::Apply);
connect(applyButton, SIGNAL(clicked()), this, SLOT(apply()));
connect(ui->autoOrdinate, SIGNAL(toggled(bool)), this, SLOT(autoOrdinateChecked(bool)));
// Curve page
connect(ui->newCurveButton, SIGNAL(clicked()), this, SLOT(newCurve()));
connect(ui->curveSelection, SIGNAL(doubleClicked ( const QModelIndex &)), this, SLOT(editCurve(const QModelIndex &)));
connect(ui->deleteCurveButton, SIGNAL(clicked()), this, SLOT(deleteSelectedCurve()));
// Function page
connect(ui->functionNew, SIGNAL(clicked()), this, SLOT(newFunction()));
connect(ui->functionHierarchicalNew, SIGNAL(clicked()), this, SLOT(newHierarachicalFunction()));
connect(ui->functionIntegralNew, SIGNAL(clicked()), this, SLOT(newIntegralFunction()));
connect(ui->functionDifferentialNew, SIGNAL(clicked()), this, SLOT(newDifferentialFunction()));
connect(ui->functionView, SIGNAL(doubleClicked ( const QModelIndex &)), this, SLOT(editFunction(const QModelIndex &)));
connect(ui->functionDelete, SIGNAL(clicked()), this, SLOT(deleteFunction()));
connect(ui->functionEditCurve, SIGNAL(clicked()), this, SLOT(editFunctionCurve()));
setWindowModality(Qt::NonModal);
}
void MainWindow::connectMenusAndShortcut() {
// connect(ui-> ,SIGNAL(triggered()),this,SLOT );
//---------File menu
{
//NEW
Q_ASSERT(connect(ui->actionNew_Project,SIGNAL(triggered()),this,SLOT(newProject())));
//LOAD
Q_ASSERT(connect(ui->actionLoad_Project ,SIGNAL(triggered()),this,SLOT(load())));
//SAVE
Q_ASSERT(connect(ui->actionSave_project,SIGNAL(triggered()),this,SLOT(save())));
//SAVE AS
Q_ASSERT(connect(ui->actionSave_as,SIGNAL(triggered()),this,SLOT(saveAs())));
//Import curve
Q_ASSERT(connect(ui->actionImport_curve,SIGNAL(triggered()),this,SLOT( importCurve())));
//EXPORT AUDIO FILE
Q_ASSERT(connect(ui->actionExport_audio_file,SIGNAL(triggered()),this,SLOT(exportDigestCurve())));
}
//---------Curves menu
{
//NEW CURVE
Q_ASSERT(connect(ui->actionAdd_curve,SIGNAL(triggered()),this,SLOT(newCurve())));
//DUPLICATE
connect(ui->actionDuplicate_curves,SIGNAL(triggered()),this,SLOT(duplicateCurves()));
//REMOVE ALL
Q_ASSERT(connect(ui->actionRemove_all_curves,SIGNAL(triggered()),this,SLOT(removeAllCurvesWithDialog())));
//REMOVE ONE
Q_ASSERT(connect(ui->actionRemove_curve ,SIGNAL(triggered()),this,SLOT(removeCurve())));
}
//---------Show menu
// connect(ui->actionShow_Proj_struct,SIGNAL(triggered()),this,SLOT(showXML()));
//---------About menu
}
static void read_curves_and_surfaces(int argc, char *argv[])
{
xscale=yscale=zscale=1.0;
int ref=DEFAULT_REF; // Number of new knots between old ones.
int maxref=DEFAULT_MAX_REF; // Maximal number of coeffs in any given direction.
// (n, n) makes sure new knots are inserted close to max limit = n...
int i;
//
// This must be reset every time we change control vertices, since
// the discretization is done in the drawing routine.
//
for (i=0; i<curves; i++) {
if (discr_curve[i]!=NULL) {
delete discr_curve[i];
discr_curve[i]=NULL;
}
}
// @HH@
// @HH@ Use the following optional command line options:
// @HH@
surfaces=0;
curves=0;
for (i=1; i<argc; i++) {
switch (argv[i][0]) {
case 's': {
// Next string is filename for surface. (One surface.)
puts("Reading surfaces");
// surface[surfaces-1]=read_nurbs_sf(argv[i+1]); // old format
std::vector<SISLSurf*> tmp;
std::ifstream is(argv[i+1]);
if (!is) {
CRIT_ERR(printf("Could not open file: '%s'.\n", argv[i+1]));
}
try {
eatwhite(is);
while (!is.eof()) {
//surface[surfaces-1] = readGoSurface(is);
tmp.push_back(readGoSurface(is));
eatwhite(is);
}
} catch (std::exception& e) {
CRIT_ERR(printf("Error occured while reading surface: %s\n", e.what()));
}
is.close();
int num_surfaces = tmp.size();
if (surfaces + num_surfaces > MAX_SURFACES) {
CRIT_ERR(puts("Increase MAX_SURFACES."));
}
for (int k = 0; k < num_surfaces; ++k) {
//
// 010116: This should be a quick fix for periodic
// surfaces...
//
if (tmp[k] == NULL) {
CRIT_ERR(printf("Couldn't read SISLSurf '%s'.\n", argv[i+1]));
}
if ((tmp[k]->cuopen_1 == SISL_CRV_PERIODIC ||
tmp[k]->cuopen_2 == SISL_CRV_PERIODIC)) {
int kstat;
SISLSurf *tmp_surf;
make_sf_kreg(tmp[k], &tmp_surf, &kstat);
if (kstat < 0) {
CRIT_ERR(printf("make_sf_kreg failed!\n"));
}
freeSurf(tmp[k]);
tmp[k] = tmp_surf;
}
if (tmp[k]->idim != 3) {
CRIT_ERR(printf("Dimension of surface is %d and not 3!\n",
tmp[k]->idim));
}
if (surface[surfaces]) {
// deleting old surface
freeSurf(surface[surfaces]);
}
surface[surfaces] = tmp[k];
surface_name[surfaces] = argv[i+1];
surf_enabled[surfaces] = 1;
// Generating an approximating polygon.
lower_degree_and_subdivide(surface + surfaces, ref, maxref);
// evaluating normals (normalized)
delete normal[surfaces];
compute_surface_normals(surface[surfaces], normal + surfaces);
++surfaces;
}
}
i++;
break;
case 'c': {
// Next string is filename for file containing 1 curve.
printf("Reading a single curve into slot %d.\n", curves);
std::vector<SISLCurve*> tmp;
//n=get_curve_set(argv[i+1], &tmp, &stat);
//get_single_curve(argv[i+1], &tmp, &stat); // old format
std::ifstream is(argv[i+1]);
if (!is) {
CRIT_ERR(printf("Could not open file: '%s'.\n", argv[i+1]));
}
try {
eatwhite(is);
while (!is.eof()) {
tmp.push_back(readGoCurve(is));
eatwhite(is);
}
} catch (std::exception& e) {
CRIT_ERR(printf("Error occured while reading curve: %s\n", e.what()));
}
is.close();
int num_curves = tmp.size();
if (curves + num_curves > MAX_CURVES) {
CRIT_ERR(puts("Increase MAX_CURVES."));
}
for(int k = 0; k < num_curves; ++k) {
if (curve[curves + k] != NULL) {
freeCurve(curve[curves + k]);
}
curve[curves + k] = tmp[k];
//
// 001206: If the dimension is 2, we set up a
// new curve, filling in zeros.
//
if (curve[curves + k]->idim==2) {
double *new_coeffs=
new double[3*curve[curves + k]->in];
if (new_coeffs==NULL)
CRIT_ERR(puts("Couldn't allocate memory."));
int j;
for (j=0; j<curve[curves + k]->in; j++) {
new_coeffs[3*j+0]= curve[curves + k]->ecoef[2*j+0];
new_coeffs[3*j+1]= curve[curves + k]->ecoef[2*j+1];
new_coeffs[3*j+2]=0.0;
}
SISLCurve *tmp2=curve[curves + k];
curve[curves + k]= newCurve(tmp2->in, tmp2->ik, tmp2->et,
new_coeffs, tmp2->ikind, 3, 1);
freeCurve(tmp2);
}
if (curve[curves + k]->idim!=3) {
CRIT_ERR(printf("Dimension of curve is %d and not 3?!\n",
curve[curves + k]->idim));
}
curve_name[curves + k]=argv[i+1];
curve_enabled[curves + k]=1;
}
curves+=num_curves;
}
i++;
break;
case 'p': {
// Next string is filename for file containing a point cloud.
printf("Reading a point cloud.\n");
std::ifstream is(argv[i+1]);
if (!is) {
CRIT_ERR(printf("Could not open file: '%s'.\n", argv[i+1]));
}
try {
vector<double> coords;
readGoPoints(coords, is);
int num_points = int(coords.size()) / 3;
printf("Number of vertices: %d\n", num_points);
for (int i = 0; i < num_points; ++i) {
pcloud.push_back(vector3t<float>(coords[3 * i],
coords[3 * i + 1],
coords[3 * i + 2]));
}
// eatwhite(is);
// int tmp;
// is >> tmp;
// is >> tmp;
// is >> tmp;
// is >> tmp;
// is >> tmp;
// is >> tmp;
// is >> tmp;
// is >> tmp;
// eatwhite(is);
// is >> tmp;
// printf("Number of vertices: %d\n", tmp);
// while (!is.eof()) {
// double x, y, z;
// is >> x;
// is >> y;
// is >> z;
// //printf("point: %f %f %f\n", x, y, z);
// pcloud.push_back(vector3t<float>(x, y, z));
// eatwhite(is);
// }
} catch (std::exception& e) {
CRIT_ERR(printf("Error occured while reading curve: %s\n", e.what()));
}
is.close();
printf("pcloud size is now %d\n", pcloud.size());
}
i++;
break;
// case 'r':
// // Set refinement factor. Default value is ???.
// puts("Reading surface refinement factor");
// ref=atoi(argv[i+1]);
// i++;
// break;
// case 'R':
case 'r':
// Set max refinement factor. Default value is ???.
puts("Reading upper bound for surface refinement.");
maxref=atoi(argv[i+1]);
i++;
break;
case 'e':
// String with keypresses to execute follows. Not
// everything will work!
printf("Executing '%s'.\n", argv[i+1]);
strncpy(init_key_string, argv[i+1], 1000);
i++;
break;
default:
puts("Huh?! Unknown option.");
exit(0);
}
}
}
/**
* 隧道管理界面类实现
* 继承自QWidget
* @author fanxiang
* @version 1.0.0
* @date 2013-08-18
*/
ManageTunnelWidget::ManageTunnelWidget(QWidget *parent) :
QWidget(parent),
ui(new Ui::ManageTunnelWidget)
{
ui->setupUi(this);
mapper = new QDataWidgetMapper(this);
linesModel = NULL;
tunnelsModel = NULL;
curvesModel = NULL;
loadLinesData();
loadTunnelData();
/* 开始选中查找模式为学号模式 */
ui->radioButton->click();
/* 开始不能修改 */
currentRow = 0;
changed = false;
saveType = Save_Modify;
cannotModify();
/* 线路及隧道数据列表更新信号槽 */
connect(ui->linesView, SIGNAL(clicked(QModelIndex)), this, SLOT(updateTunnelsView(const QModelIndex &)));
// 【作废】updateCurvesView已在setCurrentMapper中调用
//connect(ui->tunnelsView, SIGNAL(clicked(QModelIndex)), this, SLOT(updateCurvesView(const QModelIndex &)));
/* 添加删除隧道槽 */
connect(ui->newTunnelButton, SIGNAL(clicked()), this, SLOT(newTunnel()));
connect(ui->deleteTunnelButton, SIGNAL(clicked()), this, SLOT(deleteTunnel()));
/* 添加删除隧道对应曲线槽 */
//connect(ui->curvesView, SIGNAL(itemChanged(QTableWidgetItem*)), this, SLOT(changeCurveData()));
connect(ui->newCurveButton, SIGNAL(clicked()), this, SLOT(newCurve()));
connect(ui->deleteCurveButton, SIGNAL(clicked()), this, SLOT(deleteCurve()));
/* 刷新线路隧道 */
connect(ui->refreshButton, SIGNAL(clicked()), this, SLOT(refreshLinesView()));
/* 具体隧道信息信号槽 */
connect(ui->tunnelsView, SIGNAL(clicked(QModelIndex)), this, SLOT(showTunnelDetail(const QModelIndex &)));
//connect(ui->stumajorcombobox, SIGNAL(currentIndexChanged(const QString &)), this, SLOT(updateStuClasses(const QString &)));
/* 修改隧道信息信号槽 */
connect(ui->lineEdit_tunnelid, SIGNAL(textChanged(QString)), this, SLOT(canSave()));
connect(ui->lineEdit_name, SIGNAL(textChanged(QString)), this, SLOT(canSave()));
connect(ui->lineEdit_IDstd, SIGNAL(textChanged(QString)), this, SLOT(canSave()));
connect(ui->lineEdit_startPoint, SIGNAL(textChanged(QString)), this, SLOT(canSave()));
connect(ui->lineEdit_endPoint, SIGNAL(textChanged(QString)), this, SLOT(canSave()));
connect(ui->combobox_isNewLine, SIGNAL(currentIndexChanged(int)), this, SLOT(canSave()));
connect(ui->combobox_lineType, SIGNAL(currentIndexChanged(int)), this, SLOT(canSave()));
connect(ui->radioButton_isDoubleLine, SIGNAL(clicked()), this, SLOT(canSave()));
connect(ui->radioButton_isSingleLine, SIGNAL(clicked()), this, SLOT(canSave()));
connect(ui->radioButton_isUpLink, SIGNAL(clicked()), this, SLOT(canSave()));
connect(ui->radioButton_isDownLink, SIGNAL(clicked()), this, SLOT(canSave()));
connect(ui->radioButton_isBridge, SIGNAL(clicked()), this, SLOT(canSave()));
connect(ui->radioButton_notBridge, SIGNAL(clicked()), this, SLOT(canSave()));
// 隧道中的曲线界面双击修改后，也可点击保存按钮
connect(ui->curvesView, SIGNAL(doubleClicked(QModelIndex)), this, SLOT(canSave()));
connect(ui->firstButton, SIGNAL(clicked()), this, SLOT(toFirst()));
connect(ui->previousButton, SIGNAL(clicked()), this, SLOT(toPrevious()));
connect(ui->nextButton, SIGNAL(clicked()), this, SLOT(toNext()));
connect(ui->lastButton, SIGNAL(clicked()), this, SLOT(toLast()));
connect(ui->modifyButton, SIGNAL(clicked()), this, SLOT(canModify()));
/* 查找隧道槽 */
connect(ui->findButton, SIGNAL(clicked()), this, SLOT(findTunnel()));
connect(ui->findEdit,SIGNAL(textEdited(QString)),this,SLOT(showAllLines()));
/* 编辑桥梁槽 */
connect(ui->editBridgeClearanceButton, SIGNAL(clicked()), this, SLOT(editBridgeClearance()));
}