Beispiel #1
0
/* TODO: we should actually torture the PEB before marking it as bad */
static int mark_bad(const struct mtd_dev_info *mtd, struct ubi_scan_info *si, int eb)
{
	int err;

	if (!args.yes) {
		normsg_cont("mark it as bad? Continue (yes/no) ");
		if (!answer_is_yes())
			return -1;
	}

	if (!args.quiet)
		normsg_cont("marking block %d bad", eb);

	if (!args.quiet)
		printf("\n");

	if (!mtd->bb_allowed) {
		if (!args.quiet)
			printf("\n");
		return errmsg("bad blocks not supported by this flash");
	}

	err = mtd_mark_bad(mtd, args.node_fd, eb);
	if (err)
		return err;

	si->bad_cnt += 1;
	si->ec[eb] = EB_BAD;

	return consecutive_bad_check(eb);
}
Beispiel #2
0
static int want_exit(void)
{
	char buf[4];

	while (1) {
		normsg_cont("continue? (yes/no)  ");
		if (scanf("%3s", buf) == EOF) {
			sys_errmsg("scanf returned unexpected EOF, assume \"yes\"");
			return 1;
		}
		if (!strncmp(buf, "yes", 3) || !strncmp(buf, "y", 1))
			return 0;
		if (!strncmp(buf, "no", 2) || !strncmp(buf, "n", 1))
			return 1;
	}
}
Beispiel #3
0
static void print_bad_eraseblocks(const struct mtd_dev_info *mtd,
				  const struct ubi_scan_info *si)
{
	int first = 1, eb;

	if (si->bad_cnt == 0)
		return;

	normsg_cont("%d bad eraseblocks found, numbers: ", si->bad_cnt);
	for (eb = 0; eb < mtd->eb_cnt; eb++) {
		if (si->ec[eb] != EB_BAD)
			continue;
		if (first) {
			printf("%d", eb);
			first = 0;
		} else
			printf(", %d", eb);
	}
	printf("\n");
}
Beispiel #4
0
int do_ubiformat(int argc, char *argv[])
{
	int err, verbose;
	struct mtd_dev_info mtd;
	struct ubigen_info ui;
	struct ubi_scan_info *si;

	err = parse_opt(argc, argv);
	if (err)
		return err;

	err = mtd_get_dev_info(args.node, &mtd);
	if (err) {
		sys_errmsg("cannot get information about \"%s\"", args.node);
		goto out_close_mtd;
	}

	if (!is_power_of_2(mtd.min_io_size)) {
		errmsg("min. I/O size is %d, but should be power of 2",
		       mtd.min_io_size);
		goto out_close_mtd;
	}

	if (args.subpage_size && args.subpage_size != mtd.subpage_size) {
		mtd.subpage_size = args.subpage_size;
		args.manual_subpage = 1;
	}

	if (args.manual_subpage) {
		/* Do some sanity check */
		if (args.subpage_size > mtd.min_io_size) {
			errmsg("sub-page cannot be larger than min. I/O unit");
			goto out_close_mtd;
		}

		if (mtd.min_io_size % args.subpage_size) {
			errmsg("min. I/O unit size should be multiple of "
			       "sub-page size");
			goto out_close_mtd;
		}
	}

	args.node_fd = open(args.node, O_RDWR);
	if (args.node_fd < 0) {
		sys_errmsg("cannot open \"%s\"", args.node);
		goto out_close_mtd;
	}

	/* Validate VID header offset if it was specified */
	if (args.vid_hdr_offs != 0) {
		if (args.vid_hdr_offs % 8) {
			errmsg("VID header offset has to be multiple of min. I/O unit size");
			goto out_close;
		}
		if (args.vid_hdr_offs + (int)UBI_VID_HDR_SIZE > mtd.eb_size) {
			errmsg("bad VID header offset");
			goto out_close;
		}
	}

	if (!mtd.writable) {
		errmsg("%s (%s) is a read-only device", mtd.node, args.node);
		goto out_close;
	}

	/* Make sure this MTD device is not attached to UBI */
	/* FIXME! Find a proper way to do this in barebox! */

	if (!args.quiet) {
		normsg_cont("%s (%s), size %lld bytes (%s)", mtd.node, mtd.type_str,
			mtd.size, size_human_readable(mtd.size));
		printf(", %d eraseblocks of %d bytes (%s)", mtd.eb_cnt,
			mtd.eb_size, size_human_readable(mtd.eb_size));
		printf(", min. I/O size %d bytes\n", mtd.min_io_size);
	}

	if (args.quiet)
		verbose = 0;
	else if (args.verbose)
		verbose = 2;
	else
		verbose = 1;
	err = libscan_ubi_scan(&mtd, args.node_fd, &si, verbose);
	if (err) {
		errmsg("failed to scan %s (%s)", mtd.node, args.node);
		goto out_close;
	}

	if (si->good_cnt == 0) {
		errmsg("all %d eraseblocks are bad", si->bad_cnt);
		goto out_free;
	}

	if (si->good_cnt < 2 && (!args.novtbl || args.image)) {
		errmsg("too few non-bad eraseblocks (%d) on %s",
		       si->good_cnt, mtd.node);
		goto out_free;
	}

	if (!args.quiet) {
		if (si->ok_cnt)
			normsg("%d eraseblocks have valid erase counter, mean value is %lld",
			       si->ok_cnt, si->mean_ec);
		if (si->empty_cnt)
			normsg("%d eraseblocks are supposedly empty", si->empty_cnt);
		if (si->corrupted_cnt)
			normsg("%d corrupted erase counters", si->corrupted_cnt);
		print_bad_eraseblocks(&mtd, si);
	}

	if (si->alien_cnt) {
		if (!args.quiet)
			warnmsg("%d of %d eraseblocks contain non-ubifs data",
				si->alien_cnt, si->good_cnt);
		if (!args.yes && !args.quiet)
			warnmsg("use '-y' to force erasing");
		if (!args.yes)
			goto out_free;
	}

	if (!args.override_ec && si->empty_cnt < si->good_cnt) {
		int percent = (si->ok_cnt * 100) / si->good_cnt;

		/*
		 * Make sure the majority of eraseblocks have valid
		 * erase counters.
		 */
		if (percent < 50) {
			if (!args.quiet) {
				warnmsg("only %d of %d eraseblocks have valid erase counter",
					si->ok_cnt, si->good_cnt);
				if (args.yes) {
					normsg("erase counter 0 will be used for all eraseblocks");
					normsg("note, arbitrary erase counter value may be specified using -e option");

				} else {
					warnmsg("use '-y' to force erase counters");
				}
			}

			if (!args.yes)
				goto out_free;

			args.ec = 0;
			args.override_ec = 1;

		} else if (percent < 95) {
			if (!args.quiet) {
				warnmsg("only %d of %d eraseblocks have valid erase counter",
					si->ok_cnt, si->good_cnt);
				if (args.yes)
					normsg("mean erase counter %lld will be used for the rest of eraseblock",
					       si->mean_ec);
				else
					warnmsg("use '-y' to force erase counters");
			}

			if (!args.yes)
				goto out_free;

			args.ec = si->mean_ec;
			args.override_ec = 1;
		}
	}

	if (!args.quiet && args.override_ec)
		normsg("use erase counter %lld for all eraseblocks", args.ec);

	ubigen_info_init(&ui, mtd.eb_size, mtd.min_io_size, mtd.subpage_size,
			 args.vid_hdr_offs, args.ubi_ver, args.image_seq);

	if (si->vid_hdr_offs != -1 && ui.vid_hdr_offs != si->vid_hdr_offs) {
		/*
		 * Hmm, what we read from flash and what we calculated using
		 * min. I/O unit size and sub-page size differs.
		 */
		if (!args.quiet) {
			warnmsg("VID header and data offsets on flash are %d and %d, "
				"which is different to requested offsets %d and %d",
				si->vid_hdr_offs, si->data_offs, ui.vid_hdr_offs,
				ui.data_offs);
			normsg("using offsets %d and %d",  ui.vid_hdr_offs, ui.data_offs);
		}
	}

	if (args.image) {
		err = flash_image(&mtd, &ui, si);
		if (err < 0)
			goto out_free;

		err = format(&mtd, &ui, si, err, 1);
		if (err)
			goto out_free;
	} else {
		err = format(&mtd, &ui, si, 0, args.novtbl);
		if (err)
			goto out_free;
	}

	libscan_ubi_scan_free(si);
	close(args.node_fd);
	return 0;

out_free:
	libscan_ubi_scan_free(si);
out_close:
	close(args.node_fd);
out_close_mtd:
	return 1;
}
Beispiel #5
0
static int format(const struct mtd_dev_info *mtd,
		  const struct ubigen_info *ui, struct ubi_scan_info *si,
		  int start_eb, int novtbl)
{
	int eb, err, write_size;
	struct ubi_ec_hdr *hdr;
	struct ubi_vtbl_record *vtbl;
	int eb1 = -1, eb2 = -1;
	long long ec1 = -1, ec2 = -1;

	write_size = UBI_EC_HDR_SIZE + mtd->subpage_size - 1;
	write_size /= mtd->subpage_size;
	write_size *= mtd->subpage_size;
	hdr = malloc(write_size);
	if (!hdr)
		return sys_errmsg("cannot allocate %d bytes of memory", write_size);
	memset(hdr, 0xFF, write_size);

	for (eb = start_eb; eb < mtd->eb_cnt; eb++) {
		long long ec;

		if (!args.quiet && !args.verbose) {
			printf("\r" PROGRAM_NAME ": formatting eraseblock %d -- %2u %% complete  ",
			       eb, (eb + 1 - start_eb) * 100 / (mtd->eb_cnt - start_eb));
		}

		if (si->ec[eb] == EB_BAD)
			continue;

		if (args.override_ec)
			ec = args.ec;
		else if (si->ec[eb] <= EC_MAX)
			ec = si->ec[eb] + 1;
		else
			ec = si->mean_ec;
		ubigen_init_ec_hdr(ui, hdr, ec);

		if (args.verbose) {
			normsg_cont("eraseblock %d: erase", eb);
		}

		err = libmtd_erase(mtd, args.node_fd, eb);
		if (err) {
			if (!args.quiet)
				printf("\n");

			sys_errmsg("failed to erase eraseblock %d", eb);
			if (errno != EIO)
				goto out_free;

			if (mark_bad(mtd, si, eb))
				goto out_free;
			continue;
		}

		if ((eb1 == -1 || eb2 == -1) && !novtbl) {
			if (eb1 == -1) {
				eb1 = eb;
				ec1 = ec;
			} else if (eb2 == -1) {
				eb2 = eb;
				ec2 = ec;
			}
			if (args.verbose)
				printf(", do not write EC, leave for vtbl\n");
			continue;
		}

		if (args.verbose) {
			printf(", write EC %lld\n", ec);
		}

		err = libmtd_write(mtd, args.node_fd, eb, 0, hdr, write_size);
		if (err) {
			if (!args.quiet && !args.verbose)
				printf("\n");
			sys_errmsg("cannot write EC header (%d bytes buffer) to eraseblock %d",
				   write_size, eb);

			if (errno != EIO) {
				if (!args.subpage_size != mtd->min_io_size)
					normsg("may be sub-page size is "
					       "incorrect?");
				goto out_free;
			}

			err = mtd_torture(mtd, args.node_fd, eb);
			if (err) {
				if (mark_bad(mtd, si, eb))
					goto out_free;
			}
			continue;

		}
	}

	if (!args.quiet && !args.verbose)
		printf("\n");

	if (!novtbl) {
		if (eb1 == -1 || eb2 == -1) {
			errmsg("no eraseblocks for volume table");
			goto out_free;
		}

		verbose(args.verbose, "write volume table to eraseblocks %d and %d", eb1, eb2);
		vtbl = ubigen_create_empty_vtbl(ui);
		if (!vtbl)
			goto out_free;

		err = ubigen_write_layout_vol(ui, eb1, eb2, ec1,  ec2, vtbl,
					      args.node_fd);
		free(vtbl);
		if (err) {
			errmsg("cannot write layout volume");
			goto out_free;
		}
	}

	free(hdr);
	return 0;

out_free:
	free(hdr);
	return -1;
}
Beispiel #6
0
static int flash_image(const struct mtd_dev_info *mtd,
		       const struct ubigen_info *ui, struct ubi_scan_info *si)
{
	int fd, img_ebs, eb, written_ebs = 0, divisor, ret = -1;
	off_t st_size;
	char *buf = NULL;

	fd = open_file(&st_size);
	if (fd < 0)
		return fd;

	buf = malloc(mtd->eb_size);
	if (!buf) {
		sys_errmsg("cannot allocate %d bytes of memory", mtd->eb_size);
		goto out_close;
	}

	img_ebs = st_size / mtd->eb_size;

	if (img_ebs > si->good_cnt) {
		sys_errmsg("file \"%s\" is too large (%lld bytes)",
			   args.image, (long long)st_size);
		goto out_close;
	}

	if (st_size % mtd->eb_size) {
		sys_errmsg("file \"%s\" (size %lld bytes) is not multiple of "
			   "eraseblock size (%d bytes)",
			   args.image, (long long)st_size, mtd->eb_size);
		goto out_close;
	}

	if (st_size == 0) {
		sys_errmsg("file \"%s\" has size 0 bytes", args.image);
		goto out_close;
	}

	verbose(args.verbose, "will write %d eraseblocks", img_ebs);
	divisor = img_ebs;
	for (eb = 0; eb < mtd->eb_cnt; eb++) {
		int err, new_len;
		long long ec;

		if (!args.quiet && !args.verbose) {
			printf("\r" PROGRAM_NAME ": flashing eraseblock %d -- %2u %% complete  ",
			       eb, (eb + 1) * 100 / mtd->eb_cnt);
		}

		if (si->ec[eb] == EB_BAD) {
			divisor += 1;
			continue;
		}

		if (args.verbose) {
			normsg_cont("eraseblock %d: erase", eb);
		}

		err = libmtd_erase(mtd, args.node_fd, eb);
		if (err) {
			if (!args.quiet)
				printf("\n");
			sys_errmsg("failed to erase eraseblock %d", eb);

			if (errno != EIO)
				goto out_close;

			if (mark_bad(mtd, si, eb))
				goto out_close;

			continue;
		}

		err = read_full(fd, buf, mtd->eb_size);
		if (err < 0) {
			sys_errmsg("failed to read eraseblock %d from \"%s\"",
				   written_ebs, args.image);
			goto out_close;
		}

		if (args.override_ec)
			ec = args.ec;
		else if (si->ec[eb] <= EC_MAX)
			ec = si->ec[eb] + 1;
		else
			ec = si->mean_ec;

		if (args.verbose) {
			printf(", change EC to %lld", ec);
		}

		err = change_ech((struct ubi_ec_hdr *)buf, ui->image_seq, ec);
		if (err) {
			errmsg("bad EC header at eraseblock %d of \"%s\"",
			       written_ebs, args.image);
			goto out_close;
		}

		if (args.verbose) {
			printf(", write data\n");
		}

		new_len = drop_ffs(mtd, buf, mtd->eb_size);

		err = libmtd_write(mtd, args.node_fd, eb, 0, buf, new_len);
		if (err) {
			sys_errmsg("cannot write eraseblock %d", eb);

			if (errno != EIO)
				goto out_close;

			err = mtd_torture(mtd, args.node_fd, eb);
			if (err) {
				if (mark_bad(mtd, si, eb))
					goto out_close;
			}
			continue;
		}
		if (++written_ebs >= img_ebs)
			break;
	}

	if (!args.quiet && !args.verbose)
		printf("\n");

	ret = eb + 1;

out_close:
	free(buf);
	close(fd);
	return ret;
}
Beispiel #7
0
int main(int argc, char * const argv[])
{
	int err, verbose;
	libmtd_t libmtd;
	struct mtd_info mtd_info;
	struct mtd_dev_info mtd;
	libubi_t libubi;
	struct ubigen_info ui;
	struct ubi_scan_info *si;

	libmtd = libmtd_open();
	if (!libmtd)
		return errmsg("MTD subsystem is not present");

	err = parse_opt(argc, argv);
	if (err)
		goto out_close_mtd;

	err = mtd_get_info(libmtd, &mtd_info);
	if (err) {
		if (errno == ENODEV)
			errmsg("MTD is not present");
		sys_errmsg("cannot get MTD information");
		goto out_close_mtd;
	}

	err = mtd_get_dev_info(libmtd, args.node, &mtd);
	if (err) {
		sys_errmsg("cannot get information about \"%s\"", args.node);
		goto out_close_mtd;
	}

	if (!is_power_of_2(mtd.min_io_size)) {
		errmsg("min. I/O size is %d, but should be power of 2",
		       mtd.min_io_size);
		goto out_close;
	}

	if (!mtd_info.sysfs_supported) {
		/*
		 * Linux kernels older than 2.6.30 did not support sysfs
		 * interface, and it is impossible to find out sub-page
		 * size in these kernels. This is why users should
		 * provide -s option.
		 */
		if (args.subpage_size == 0) {
			warnmsg("your MTD system is old and it is impossible "
				"to detect sub-page size. Use -s to get rid "
				"of this warning");
			normsg("assume sub-page to be %d", mtd.subpage_size);
		} else {
			mtd.subpage_size = args.subpage_size;
			args.manual_subpage = 1;
		}
	} else if (args.subpage_size && args.subpage_size != mtd.subpage_size) {
		mtd.subpage_size = args.subpage_size;
		args.manual_subpage = 1;
	}

	if (args.manual_subpage) {
		/* Do some sanity check */
		if (args.subpage_size > mtd.min_io_size) {
			errmsg("sub-page cannot be larger than min. I/O unit");
			goto out_close;
		}

		if (mtd.min_io_size % args.subpage_size) {
			errmsg("min. I/O unit size should be multiple of "
			       "sub-page size");
			goto out_close;
		}
	}

	args.node_fd = open(args.node, O_RDWR);
	if (args.node_fd == -1) {
		sys_errmsg("cannot open \"%s\"", args.node);
		goto out_close_mtd;
	}

	/* Validate VID header offset if it was specified */
	if (args.vid_hdr_offs != 0) {
		if (args.vid_hdr_offs % 8) {
			errmsg("VID header offset has to be multiple of min. I/O unit size");
			goto out_close;
		}
		if (args.vid_hdr_offs + (int)UBI_VID_HDR_SIZE > mtd.eb_size) {
			errmsg("bad VID header offset");
			goto out_close;
		}
	}

	if (!mtd.writable) {
		errmsg("mtd%d (%s) is a read-only device", mtd.mtd_num, args.node);
		goto out_close;
	}

	/* Make sure this MTD device is not attached to UBI */
	libubi = libubi_open();
	if (libubi) {
		int ubi_dev_num;

		err = mtd_num2ubi_dev(libubi, mtd.mtd_num, &ubi_dev_num);
		libubi_close(libubi);
		if (!err) {
			errmsg("please, first detach mtd%d (%s) from ubi%d",
			       mtd.mtd_num, args.node, ubi_dev_num);
			goto out_close;
		}
	}

	if (!args.quiet) {
		normsg_cont("mtd%d (%s), size ", mtd.mtd_num, mtd.type_str);
		ubiutils_print_bytes(mtd.size, 1);
		printf(", %d eraseblocks of ", mtd.eb_cnt);
		ubiutils_print_bytes(mtd.eb_size, 1);
		printf(", min. I/O size %d bytes\n", mtd.min_io_size);
	}

	if (args.quiet)
		verbose = 0;
	else if (args.verbose)
		verbose = 2;
	else
		verbose = 1;
	err = ubi_scan(&mtd, args.node_fd, &si, verbose);
	if (err) {
		errmsg("failed to scan mtd%d (%s)", mtd.mtd_num, args.node);
		goto out_close;
	}

	if (si->good_cnt == 0) {
		errmsg("all %d eraseblocks are bad", si->bad_cnt);
		goto out_free;
	}

	if (si->good_cnt < 2 && (!args.novtbl || args.image)) {
		errmsg("too few non-bad eraseblocks (%d) on mtd%d",
		       si->good_cnt, mtd.mtd_num);
		goto out_free;
	}

	if (!args.quiet) {
		if (si->ok_cnt)
			normsg("%d eraseblocks have valid erase counter, mean value is %lld",
			       si->ok_cnt, si->mean_ec);
		if (si->empty_cnt)
			normsg("%d eraseblocks are supposedly empty", si->empty_cnt);
		if (si->corrupted_cnt)
			normsg("%d corrupted erase counters", si->corrupted_cnt);
		print_bad_eraseblocks(&mtd, si);
	}

	if (si->alien_cnt) {
		if (!args.yes || !args.quiet)
			warnmsg("%d of %d eraseblocks contain non-ubifs data",
				si->alien_cnt, si->good_cnt);
		if (!args.yes && want_exit()) {
			if (args.yes && !args.quiet)
				printf("yes\n");
			goto out_free;
		}
	}

	if (!args.override_ec && si->empty_cnt < si->good_cnt) {
		int percent = ((double)si->ok_cnt)/si->good_cnt * 100;

		/*
		 * Make sure the majority of eraseblocks have valid
		 * erase counters.
		 */
		if (percent < 50) {
			if (!args.yes || !args.quiet)
				warnmsg("only %d of %d eraseblocks have valid erase counter",
					si->ok_cnt, si->good_cnt);
				normsg("erase counter 0 will be used for all eraseblocks");
				normsg("note, arbitrary erase counter value may be specified using -e option");
			if (!args.yes && want_exit()) {
				if (args.yes && !args.quiet)
					printf("yes\n");
				goto out_free;
			}
			 args.ec = 0;
			 args.override_ec = 1;
		} else if (percent < 95) {
			if (!args.yes || !args.quiet)
				warnmsg("only %d of %d eraseblocks have valid erase counter",
					si->ok_cnt, si->good_cnt);
				normsg("mean erase counter %lld will be used for the rest of eraseblock",
				       si->mean_ec);
			if (!args.yes && want_exit()) {
				if (args.yes && !args.quiet)
					printf("yes\n");
				goto out_free;
			}
			args.ec = si->mean_ec;
			args.override_ec = 1;
		}
	}

	if (!args.quiet && args.override_ec)
		normsg("use erase counter %lld for all eraseblocks", args.ec);

	ubigen_info_init(&ui, mtd.eb_size, mtd.min_io_size, mtd.subpage_size,
			 args.vid_hdr_offs, args.ubi_ver, args.image_seq);

	if (si->vid_hdr_offs != -1 && ui.vid_hdr_offs != si->vid_hdr_offs) {
		/*
		 * Hmm, what we read from flash and what we calculated using
		 * min. I/O unit size and sub-page size differs.
		 */
		if (!args.yes || !args.quiet) {
			warnmsg("VID header and data offsets on flash are %d and %d, "
				"which is different to requested offsets %d and %d",
				si->vid_hdr_offs, si->data_offs, ui.vid_hdr_offs,
				ui.data_offs);
			normsg_cont("use new offsets %d and %d? (yes/no)  ",
				    ui.vid_hdr_offs, ui.data_offs);
		}
		if (args.yes || answer_is_yes()) {
			if (args.yes && !args.quiet)
				printf("yes\n");
		} else
			ubigen_info_init(&ui, mtd.eb_size, mtd.min_io_size, 0,
					 si->vid_hdr_offs, args.ubi_ver,
					 args.image_seq);
		normsg("use offsets %d and %d",  ui.vid_hdr_offs, ui.data_offs);
	}

	if (args.image) {
		err = flash_image(libmtd, &mtd, &ui, si);
		if (err < 0)
			goto out_free;

		err = format(libmtd, &mtd, &ui, si, err, 1);
		if (err)
			goto out_free;
	} else {
		err = format(libmtd, &mtd, &ui, si, 0, args.novtbl);
		if (err)
			goto out_free;
	}

	ubi_scan_free(si);
	close(args.node_fd);
	libmtd_close(libmtd);
	return 0;

out_free:
	ubi_scan_free(si);
out_close:
	close(args.node_fd);
out_close_mtd:
	libmtd_close(libmtd);
	return -1;
}
Beispiel #8
0
int ubi_scan(struct mtd_dev_info *mtd, int fd, struct ubi_scan_info **info,
	     int verbose)
{
	int eb, v = (verbose == 2), pr = (verbose == 1);
	struct ubi_scan_info *si;
	unsigned long long sum = 0;

	si = calloc(1, sizeof(struct ubi_scan_info));
	if (!si)
		return sys_errmsg("cannot allocate %zd bytes of memory",
				  sizeof(struct ubi_scan_info));

	si->ec = calloc(mtd->eb_cnt, sizeof(uint32_t));
	if (!si->ec) {
		sys_errmsg("cannot allocate %zd bytes of memory",
			   sizeof(struct ubi_scan_info));
		goto out_si;
	}

	si->vid_hdr_offs = si->data_offs = -1;

	verbose(v, "start scanning eraseblocks 0-%d", mtd->eb_cnt);
	for (eb = 0; eb < mtd->eb_cnt; eb++) {
		int ret;
		uint32_t crc;
		struct ubi_ec_hdr ech;
		unsigned long long ec;

		if (v) {
			normsg_cont("scanning eraseblock %d", eb);
			fflush(stdout);
		}
		if (pr) {
			printf("\r" PROGRAM_NAME ": scanning eraseblock %d -- %2lld %% complete  ",
			       eb, (long long)(eb + 1) * 100 / mtd->eb_cnt);
			fflush(stdout);
		}

		ret = mtd_is_bad(mtd, fd, eb);
		if (ret == -1)
			goto out_ec;
		if (ret) {
			si->bad_cnt += 1;
			si->ec[eb] = EB_BAD;
			if (v)
				printf(": bad\n");
			continue;
		}

		ret = mtd_read(mtd, fd, eb, 0, &ech, sizeof(struct ubi_ec_hdr));
		if (ret < 0)
			goto out_ec;

		if (be32_to_cpu(ech.magic) != UBI_EC_HDR_MAGIC) {
			if (all_ff(&ech, sizeof(struct ubi_ec_hdr))) {
				si->empty_cnt += 1;
				si->ec[eb] = EB_EMPTY;
				if (v)
					printf(": empty\n");
			} else {
				si->alien_cnt += 1;
				si->ec[eb] = EB_ALIEN;
				if (v)
					printf(": alien\n");
			}
			continue;
		}

		crc = mtd_crc32(UBI_CRC32_INIT, &ech, UBI_EC_HDR_SIZE_CRC);
		if (be32_to_cpu(ech.hdr_crc) != crc) {
			si->corrupted_cnt += 1;
			si->ec[eb] = EB_CORRUPTED;
			if (v)
				printf(": bad CRC %#08x, should be %#08x\n",
				       crc, be32_to_cpu(ech.hdr_crc));
			continue;
		}

		ec = be64_to_cpu(ech.ec);
		if (ec > EC_MAX) {
			if (pr)
				printf("\n");
			errmsg("erase counter in EB %d is %llu, while this "
			       "program expects them to be less than %u",
			       eb, ec, EC_MAX);
			goto out_ec;
		}

		if (si->vid_hdr_offs == -1) {
			si->vid_hdr_offs = be32_to_cpu(ech.vid_hdr_offset);
			si->data_offs = be32_to_cpu(ech.data_offset);
			if (si->data_offs % mtd->min_io_size) {
				if (pr)
					printf("\n");
				if (v)
					printf(": corrupted because of the below\n");
				warnmsg("bad data offset %d at eraseblock %d (n"
					"of multiple of min. I/O unit size %d)",
					si->data_offs, eb, mtd->min_io_size);
				warnmsg("treat eraseblock %d as corrupted", eb);
				si->corrupted_cnt += 1;
				si->ec[eb] = EB_CORRUPTED;
				continue;

			}
		} else {
			if ((int)be32_to_cpu(ech.vid_hdr_offset) != si->vid_hdr_offs) {
				if (pr)
					printf("\n");
				if (v)
					printf(": corrupted because of the below\n");
				warnmsg("inconsistent VID header offset: was "
					"%d, but is %d in eraseblock %d",
					si->vid_hdr_offs,
					be32_to_cpu(ech.vid_hdr_offset), eb);
				warnmsg("treat eraseblock %d as corrupted", eb);
				si->corrupted_cnt += 1;
				si->ec[eb] = EB_CORRUPTED;
				continue;
			}
			if ((int)be32_to_cpu(ech.data_offset) != si->data_offs) {
				if (pr)
					printf("\n");
				if (v)
					printf(": corrupted because of the below\n");
				warnmsg("inconsistent data offset: was %d, but"
					" is %d in eraseblock %d",
					si->data_offs,
					be32_to_cpu(ech.data_offset), eb);
				warnmsg("treat eraseblock %d as corrupted", eb);
				si->corrupted_cnt += 1;
				si->ec[eb] = EB_CORRUPTED;
				continue;
			}
		}

		si->ok_cnt += 1;
		si->ec[eb] = ec;
		if (v)
			printf(": OK, erase counter %u\n", si->ec[eb]);
	}

	if (si->ok_cnt != 0) {
		/* Calculate mean erase counter */
		for (eb = 0; eb < mtd->eb_cnt; eb++) {
			if (si->ec[eb] > EC_MAX)
				continue;
			sum += si->ec[eb];
		}
		si->mean_ec = sum / si->ok_cnt;
	}

	si->good_cnt = mtd->eb_cnt - si->bad_cnt;
	verbose(v, "finished, mean EC %lld, %d OK, %d corrupted, %d empty, %d "
		"alien, bad %d", si->mean_ec, si->ok_cnt, si->corrupted_cnt,
		si->empty_cnt, si->alien_cnt, si->bad_cnt);

	*info = si;
	if (pr)
		printf("\n");
	return 0;

out_ec:
	free(si->ec);
out_si:
	free(si);
	*info = NULL;
	return -1;
}
Beispiel #9
0
static int flash_image(libmtd_t libmtd, const struct mtd_dev_info *mtd,
		       const struct ubigen_info *ui, struct ubi_scan_info *si)
{
	int fd, img_ebs, eb, written_ebs = 0, divisor, skip_data_read = 0;
	off_t st_size;

	fd = open_file(&st_size);
	if (fd < 0)
		return fd;

	img_ebs = st_size / mtd->eb_size;

	if (img_ebs > si->good_cnt) {
		sys_errmsg("file \"%s\" is too large (%lld bytes)",
			   args.image, (long long)st_size);
		goto out_close;
	}

	if (st_size % mtd->eb_size) {
		return sys_errmsg("file \"%s\" (size %lld bytes) is not multiple of ""eraseblock size (%d bytes)",
				  args.image, (long long)st_size, mtd->eb_size);
		goto out_close;
	}

	verbose(args.verbose, "will write %d eraseblocks", img_ebs);
	divisor = img_ebs;
	for (eb = 0; eb < mtd->eb_cnt; eb++) {
		int err, new_len;
		char buf[mtd->eb_size];
		long long ec;

		if (!args.quiet && !args.verbose) {
			printf("\r" PROGRAM_NAME ": flashing eraseblock %d -- %2lld %% complete  ",
			       eb, (long long)(eb + 1) * 100 / divisor);
			fflush(stdout);
		}

		if (si->ec[eb] == EB_BAD) {
			divisor += 1;
			continue;
		}

		if (args.verbose) {
			normsg_cont("eraseblock %d: erase", eb);
			fflush(stdout);
		}

		err = mtd_erase(libmtd, mtd, args.node_fd, eb);
		if (err) {
			if (!args.quiet)
				printf("\n");
			sys_errmsg("failed to erase eraseblock %d", eb);

			if (errno != EIO)
				goto out_close;

			if (mark_bad(mtd, si, eb))
				goto out_close;

			continue;
		}

		if (!skip_data_read) {
			err = read_all(fd, buf, mtd->eb_size);
			if (err) {
				sys_errmsg("failed to read eraseblock %d from \"%s\"",
					   written_ebs, args.image);
				goto out_close;
			}
		}
		skip_data_read = 0;

		if (args.override_ec)
			ec = args.ec;
		else if (si->ec[eb] <= EC_MAX)
			ec = si->ec[eb] + 1;
		else
			ec = si->mean_ec;

		if (args.verbose) {
			printf(", change EC to %lld", ec);
			fflush(stdout);
		}

		err = change_ech((struct ubi_ec_hdr *)buf, ui->image_seq, ec);
		if (err) {
			errmsg("bad EC header at eraseblock %d of \"%s\"",
			       written_ebs, args.image);
			goto out_close;
		}

		if (args.verbose) {
			printf(", write data\n");
			fflush(stdout);
		}

		new_len = drop_ffs(mtd, buf, mtd->eb_size);

		err = mtd_write(libmtd, mtd, args.node_fd, eb, 0, buf, new_len,
				NULL, 0, 0);
		if (err) {
			sys_errmsg("cannot write eraseblock %d", eb);

			if (errno != EIO)
				goto out_close;

			err = mtd_torture(libmtd, mtd, args.node_fd, eb);
			if (err) {
				if (mark_bad(mtd, si, eb))
					goto out_close;
			}

			/*
			 * We have to make sure that we do not read next block
			 * of data from the input image or stdin - we have to
			 * write buf first instead.
			 */
			skip_data_read = 1;
			continue;
		}
		if (++written_ebs >= img_ebs)
			break;
	}

	if (!args.quiet && !args.verbose)
		printf("\n");
	close(fd);
	return eb + 1;

out_close:
	close(fd);
	return -1;
}
int main(int argc, char * const argv[])
{
	int err, verbose;
	struct mtd_info mtd;
	libubi_t libubi;
	struct ubigen_info ui;
	struct ubi_scan_info *si;

	err = parse_opt(argc, argv);
	if (err)
		return -1;

	err = mtd_get_info(args.node, &mtd);
	if (err)
		return errmsg("cannot get information about \"%s\"", args.node);

	if (args.subpage_size == 0)
		args.subpage_size = mtd.min_io_size;
	else {
		if (args.subpage_size > mtd.min_io_size) {
			errmsg("sub-page cannot be larger than min. I/O unit");
			goto out_close;
		}

		if (mtd.min_io_size % args.subpage_size) {
			errmsg("min. I/O unit size should be multiple of sub-page size");
			goto out_close;
		}
	}

	/* Validate VID header offset if it was specified */
	if (args.vid_hdr_offs != 0) {
		if (args.vid_hdr_offs % 8) {
			errmsg("VID header offset has to be multiple of min. I/O unit size");
			goto out_close;
		}
		if (args.vid_hdr_offs + UBI_VID_HDR_SIZE > mtd.eb_size) {
			errmsg("bad VID header offset");
			goto out_close;
		}
	}

	/*
	 * Because of MTD interface limitations 'mtd_get_info()' cannot get
	 * sub-page so we force the user to pass it via the command line. Let's
	 * hope the user passed us something sane.
	 */
	mtd.subpage_size = args.subpage_size;

	if (mtd.rdonly) {
		errmsg("mtd%d (%s) is a read-only device", mtd.num, args.node);
		goto out_close;
	}

	/* Make sure this MTD device is not attached to UBI */
	libubi = libubi_open(0);
	if (libubi) {
		int ubi_dev_num;

		err = mtd_num2ubi_dev(libubi, mtd.num, &ubi_dev_num);
		libubi_close(libubi);
		if (!err) {
			errmsg("please, first detach mtd%d (%s) from ubi%d",
			       mtd.num, args.node, ubi_dev_num);
			goto out_close;
		}
	}

	if (!args.quiet) {
		normsg_cont("mtd%d (%s), size ", mtd.num, mtd.type_str);
		ubiutils_print_bytes(mtd.size, 1);
		printf(", %d eraseblocks of ", mtd.eb_size);
		ubiutils_print_bytes(mtd.eb_size, 1);
		printf(", min. I/O size %d bytes\n", mtd.min_io_size);
	}

	if (args.quiet)
		verbose = 0;
	else if (args.verbose)
		verbose = 2;
	else
		verbose = 1;
	err = ubi_scan(&mtd, &si, verbose);
	if (err) {
		errmsg("failed to scan mtd%d (%s)", mtd.num, args.node);
		goto out_close;
	}

	if (si->good_cnt == 0) {
		errmsg("all %d eraseblocks are bad", si->bad_cnt);
		goto out_free;
	}

	if (si->good_cnt < 2 && (!args.novtbl || args.image)) {
		errmsg("too few non-bad eraseblocks (%d) on mtd%d", si->good_cnt, mtd.num);
		goto out_free;
	}

	if (!args.quiet) {
		if (si->ok_cnt)
			normsg("%d eraseblocks have valid erase counter, mean value is %lld",
			       si->ok_cnt, si->mean_ec);
		if (si->empty_cnt)
			normsg("%d eraseblocks are supposedly empty", si->empty_cnt);
		if (si->corrupted_cnt)
			normsg("%d corrupted erase counters", si->corrupted_cnt);
		print_bad_eraseblocks(&mtd, si);
	}

	if (si->alien_cnt) {
		if (!args.yes || !args.quiet)
			warnmsg("%d of %d eraseblocks contain non-ubifs data",
				si->alien_cnt, si->good_cnt);
		if (!args.yes && want_exit()) {
			if (args.yes && !args.quiet)
				printf("yes\n");
			goto out_free;
		}
	}

	if (!args.override_ec && si->empty_cnt < si->good_cnt) {
		int percent = ((double)si->ok_cnt)/si->good_cnt * 100;

		/*
		 * Make sure the majority of eraseblocks have valid
		 * erase counters.
		 */
		if (percent < 50) {
			if (!args.yes || !args.quiet)
				warnmsg("only %d of %d eraseblocks have valid erase counter",
					si->ok_cnt, si->good_cnt);
				normsg("erase counter 0 will be used for all eraseblocks");
				normsg("note, arbitrary erase counter value may be specified using -e option");
			if (!args.yes && want_exit()) {
				if (args.yes && !args.quiet)
					printf("yes\n");
				goto out_free;
			}
			 args.ec = 0;
			 args.override_ec = 1;
		} else if (percent < 95) {
			if (!args.yes || !args.quiet)
				warnmsg("only %d of %d eraseblocks have valid erase counter",
					si->ok_cnt, si->good_cnt);
				normsg("mean erase counter %lld will be used for the rest of eraseblock",
				       si->mean_ec);
			if (!args.yes && want_exit()) {
				if (args.yes && !args.quiet)
					printf("yes\n");
				goto out_free;
			}
			args.ec = si->mean_ec;
			args.override_ec = 1;
		}
	}

	if (!args.quiet && args.override_ec)
		normsg("use erase counter %lld for all eraseblocks", args.ec);

	ubigen_info_init(&ui, mtd.eb_size, mtd.min_io_size, args.subpage_size,
			 args.vid_hdr_offs, args.ubi_ver);

	if (si->vid_hdr_offs != -1 && ui.vid_hdr_offs != si->vid_hdr_offs) {
		/*
		 * Hmm, what we read from flash and what we calculated using
		 * min. I/O unit size and sub-page size differs.
		 */
		if (!args.yes || !args.quiet) {
			warnmsg("VID header and data offsets on flash are %d and %d, "
				"which is different to calculated offsets %d and %d",
				si->vid_hdr_offs, si->data_offs, ui.vid_hdr_offs,
				ui.data_offs);
			normsg_cont("use new offsets %d and %d? (yes/no)  ",
				    si->vid_hdr_offs, si->data_offs);
		}
		if (args.yes || answer_is_yes()) {
			if (args.yes && !args.quiet)
				printf("yes\n");
		} else {
			ui.vid_hdr_offs = si->vid_hdr_offs;
			ui.data_offs = si->data_offs;
		}
	}

	if (args.image) {
		err = flash_image(&mtd, &ui, si);
		if (err < 0)
			goto out_free;

		err = format(&mtd, &ui, si, err, 1);
		if (err)
			goto out_free;
	} else {
		err = format(&mtd, &ui, si, 0, args.novtbl);
		if (err)
			goto out_free;
	}

	ubi_scan_free(si);
	close(mtd.fd);
	return 0;

out_free:
	ubi_scan_free(si);
out_close:
	close(mtd.fd);
	return -1;
}
static int flash_image(const struct mtd_info *mtd, const struct ubigen_info *ui,
		       struct ubi_scan_info *si)
{
	int fd, img_ebs, eb, written_ebs = 0, divisor;
	off_t st_size;

	fd = open_file(mtd, si, &st_size);
	if (fd < 0)
		return fd;

	img_ebs = st_size / mtd->eb_size;

	if (img_ebs > si->good_cnt) {
		sys_errmsg("file \"%s\" is too large (%lld bytes)",
			   args.image, (long long)st_size);
		goto out_close;
	}

	if (st_size % mtd->eb_size) {
		return sys_errmsg("file \"%s\" (size %lld bytes) is not multiple of eraseblock size (%d bytes)",
				  args.image, (long long)st_size, mtd->eb_size);
		goto out_close;
	}

	verbose(args.verbose, "will write %d eraseblocks", img_ebs);
	divisor = img_ebs;
	for (eb = 0; eb < mtd->eb_cnt; eb++) {
		int err, new_len;
		char buf[mtd->eb_size];
		long long ec;

		if (!args.quiet && !args.verbose) {
			printf("\r" PROGRAM_NAME ": flashing eraseblock %d -- %2lld %% complete  ",
			       eb, (long long)(eb + 1) * 100 / divisor);
			fflush(stdout);
		}

		if (si->ec[eb] == EB_BAD) {
			divisor += 1;
			continue;
		}

		if (args.verbose) {
			normsg_cont("eraseblock %d: erase", eb);
			fflush(stdout);
		}

		err = mtd_erase(mtd, eb);
		if (err) {
			sys_errmsg("failed to erase eraseblock %d", eb);
			goto out_close;
		}

		err = read_all(fd, buf, mtd->eb_size);
		if (err) {
			sys_errmsg("failed to read eraseblock %d from \"%s\"",
				   written_ebs, args.image);
			goto out_close;
		}


		if (si->ec[eb] <= EC_MAX)
			ec = si->ec[eb] + 1;
		else if (!args.override_ec)
			ec = si->mean_ec;
		else
			ec = args.ec;

		if (args.verbose) {
			printf(", change EC to %lld", ec);
			fflush(stdout);
		}

		err = change_ec((struct ubi_ec_hdr *)buf, ec);
		if (err) {
			errmsg("bad EC header at eraseblock %d of \"%s\"",
			       written_ebs, args.image);
			goto out_close;
		}

		if (args.verbose) {
			printf(", write data\n");
			fflush(stdout);
		}

		new_len = drop_ffs(mtd, buf, mtd->eb_size);

		err = mtd_write(mtd, eb, 0, buf, new_len);
		if (err) {
			sys_errmsg("cannot write eraseblock %d", eb);
			goto out_close;
		}
		if (++written_ebs >= img_ebs)
			break;
	}

	if (!args.quiet && !args.verbose)
		printf("\n");
	close(fd);
	return eb + 1;

out_close:
	close(fd);
	return -1;
}