int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
/* Assume we're using HV mode when the HV module is loaded */
int hv_enabled = kvmppc_hv_ops ? 1 : 0;
if (kvm) {
/*
* Hooray - we know which VM type we're running on. Depend on
* that rather than the guess above.
*/
hv_enabled = is_kvmppc_hv_enabled(kvm);
}
switch (ext) {
#ifdef CONFIG_BOOKE
case KVM_CAP_PPC_BOOKE_SREGS:
case KVM_CAP_PPC_BOOKE_WATCHDOG:
case KVM_CAP_PPC_EPR:
#else
case KVM_CAP_PPC_SEGSTATE:
case KVM_CAP_PPC_HIOR:
case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:
case KVM_CAP_PPC_IRQ_LEVEL:
case KVM_CAP_ENABLE_CAP:
case KVM_CAP_ENABLE_CAP_VM:
case KVM_CAP_ONE_REG:
case KVM_CAP_IOEVENTFD:
case KVM_CAP_DEVICE_CTRL:
r = 1;
break;
case KVM_CAP_PPC_PAIRED_SINGLES:
case KVM_CAP_PPC_OSI:
case KVM_CAP_PPC_GET_PVINFO:
#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_CAP_SW_TLB:
#endif
/* We support this only for PR */
r = !hv_enabled;
break;
#ifdef CONFIG_KVM_MMIO
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
#endif
#ifdef CONFIG_KVM_MPIC
case KVM_CAP_IRQ_MPIC:
r = 1;
break;
#endif
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_CAP_SPAPR_TCE:
case KVM_CAP_SPAPR_TCE_64:
case KVM_CAP_PPC_RTAS:
case KVM_CAP_PPC_FIXUP_HCALL:
case KVM_CAP_PPC_ENABLE_HCALL:
#ifdef CONFIG_KVM_XICS
case KVM_CAP_IRQ_XICS:
#endif
r = 1;
break;
case KVM_CAP_PPC_ALLOC_HTAB:
r = hv_enabled;
break;
#endif /* CONFIG_PPC_BOOK3S_64 */
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_SMT:
r = 0;
if (hv_enabled) {
if (cpu_has_feature(CPU_FTR_ARCH_300))
r = 1;
else
r = threads_per_subcore;
}
break;
case KVM_CAP_PPC_RMA:
r = 0;
break;
case KVM_CAP_PPC_HWRNG:
r = kvmppc_hwrng_present();
break;
#endif
case KVM_CAP_SYNC_MMU:
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
r = hv_enabled;
#elif defined(KVM_ARCH_WANT_MMU_NOTIFIER)
r = 1;
#else
r = 0;
#endif
break;
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_HTAB_FD:
r = hv_enabled;
break;
#endif
case KVM_CAP_NR_VCPUS:
/*
* Recommending a number of CPUs is somewhat arbitrary; we
* return the number of present CPUs for -HV (since a host
* will have secondary threads "offline"), and for other KVM
* implementations just count online CPUs.
*/
if (hv_enabled)
r = num_present_cpus();
else
r = num_online_cpus();
break;
case KVM_CAP_NR_MEMSLOTS:
r = KVM_USER_MEM_SLOTS;
break;
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_CAP_PPC_GET_SMMU_INFO:
r = 1;
break;
case KVM_CAP_SPAPR_MULTITCE:
r = 1;
break;
#endif
case KVM_CAP_PPC_HTM:
r = cpu_has_feature(CPU_FTR_TM_COMP) &&
is_kvmppc_hv_enabled(kvm);
break;
default:
r = 0;
break;
}
return r;
}
int kvm_dev_ioctl_check_extension(long ext)
{
int r;
/* FIXME!!
* Should some of this be vm ioctl ? is it possible now ?
*/
int hv_enabled = kvmppc_hv_ops ? 1 : 0;
switch (ext) {
#ifdef CONFIG_BOOKE
case KVM_CAP_PPC_BOOKE_SREGS:
case KVM_CAP_PPC_BOOKE_WATCHDOG:
case KVM_CAP_PPC_EPR:
#else
case KVM_CAP_PPC_SEGSTATE:
case KVM_CAP_PPC_HIOR:
case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:
case KVM_CAP_PPC_IRQ_LEVEL:
case KVM_CAP_ENABLE_CAP:
case KVM_CAP_ONE_REG:
case KVM_CAP_IOEVENTFD:
case KVM_CAP_DEVICE_CTRL:
r = 1;
break;
case KVM_CAP_PPC_PAIRED_SINGLES:
case KVM_CAP_PPC_OSI:
case KVM_CAP_PPC_GET_PVINFO:
#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_CAP_SW_TLB:
#endif
/* We support this only for PR */
r = !hv_enabled;
break;
#ifdef CONFIG_KVM_MMIO
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
#endif
#ifdef CONFIG_KVM_MPIC
case KVM_CAP_IRQ_MPIC:
r = 1;
break;
#endif
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_CAP_SPAPR_TCE:
case KVM_CAP_PPC_ALLOC_HTAB:
case KVM_CAP_PPC_RTAS:
case KVM_CAP_PPC_FIXUP_HCALL:
#ifdef CONFIG_KVM_XICS
case KVM_CAP_IRQ_XICS:
#endif
r = 1;
break;
#endif /* CONFIG_PPC_BOOK3S_64 */
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_SMT:
if (hv_enabled)
r = threads_per_core;
else
r = 0;
break;
case KVM_CAP_PPC_RMA:
r = hv_enabled;
/* PPC970 requires an RMA */
if (r && cpu_has_feature(CPU_FTR_ARCH_201))
r = 2;
break;
#endif
case KVM_CAP_SYNC_MMU:
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
if (hv_enabled)
r = cpu_has_feature(CPU_FTR_ARCH_206) ? 1 : 0;
else
r = 0;
#elif defined(KVM_ARCH_WANT_MMU_NOTIFIER)
r = 1;
#else
r = 0;
#endif
break;
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_HTAB_FD:
r = hv_enabled;
break;
#endif
case KVM_CAP_NR_VCPUS:
/*
* Recommending a number of CPUs is somewhat arbitrary; we
* return the number of present CPUs for -HV (since a host
* will have secondary threads "offline"), and for other KVM
* implementations just count online CPUs.
*/
if (hv_enabled)
r = num_present_cpus();
else
r = num_online_cpus();
break;
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_CAP_PPC_GET_SMMU_INFO:
r = 1;
break;
#endif
default:
r = 0;
break;
}
return r;
}
int cn23xx_setup_octeon_vf_device(struct octeon_device *oct)
{
struct octeon_cn23xx_vf *cn23xx = (struct octeon_cn23xx_vf *)oct->chip;
u32 rings_per_vf;
u64 reg_val;
if (octeon_map_pci_barx(oct, 0, 0))
return 1;
/* INPUT_CONTROL[RPVF] gives the VF IOq count */
reg_val = octeon_read_csr64(oct, CN23XX_VF_SLI_IQ_PKT_CONTROL64(0));
oct->pf_num = (reg_val >> CN23XX_PKT_INPUT_CTL_PF_NUM_POS) &
CN23XX_PKT_INPUT_CTL_PF_NUM_MASK;
oct->vf_num = (reg_val >> CN23XX_PKT_INPUT_CTL_VF_NUM_POS) &
CN23XX_PKT_INPUT_CTL_VF_NUM_MASK;
reg_val = reg_val >> CN23XX_PKT_INPUT_CTL_RPVF_POS;
rings_per_vf = reg_val & CN23XX_PKT_INPUT_CTL_RPVF_MASK;
cn23xx->conf = oct_get_config_info(oct, LIO_23XX);
if (!cn23xx->conf) {
dev_err(&oct->pci_dev->dev, "%s No Config found for CN23XX\n",
__func__);
octeon_unmap_pci_barx(oct, 0);
return 1;
}
if (oct->sriov_info.rings_per_vf > rings_per_vf) {
dev_warn(&oct->pci_dev->dev,
"num_queues:%d greater than PF configured rings_per_vf:%d. Reducing to %d.\n",
oct->sriov_info.rings_per_vf, rings_per_vf,
rings_per_vf);
oct->sriov_info.rings_per_vf = rings_per_vf;
} else {
if (rings_per_vf > num_present_cpus()) {
dev_warn(&oct->pci_dev->dev,
"PF configured rings_per_vf:%d greater than num_cpu:%d. Using rings_per_vf:%d equal to num cpus\n",
rings_per_vf,
num_present_cpus(),
num_present_cpus());
oct->sriov_info.rings_per_vf =
num_present_cpus();
} else {
oct->sriov_info.rings_per_vf = rings_per_vf;
}
}
oct->fn_list.setup_iq_regs = cn23xx_setup_vf_iq_regs;
oct->fn_list.setup_oq_regs = cn23xx_setup_vf_oq_regs;
oct->fn_list.setup_mbox = cn23xx_setup_vf_mbox;
oct->fn_list.free_mbox = cn23xx_free_vf_mbox;
oct->fn_list.msix_interrupt_handler = cn23xx_vf_msix_interrupt_handler;
oct->fn_list.setup_device_regs = cn23xx_setup_vf_device_regs;
oct->fn_list.update_iq_read_idx = cn23xx_update_read_index;
oct->fn_list.enable_interrupt = cn23xx_enable_vf_interrupt;
oct->fn_list.disable_interrupt = cn23xx_disable_vf_interrupt;
oct->fn_list.enable_io_queues = cn23xx_enable_vf_io_queues;
oct->fn_list.disable_io_queues = cn23xx_disable_vf_io_queues;
return 0;
}
/* Put the CAIF packet on the virtio ring and kick the receiver */
static int cfv_netdev_tx(struct sk_buff *skb, struct net_device *netdev)
{
struct cfv_info *cfv = netdev_priv(netdev);
struct buf_info *buf_info;
struct scatterlist sg;
unsigned long flags;
bool flow_off = false;
int ret;
/* garbage collect released buffers */
cfv_release_used_buf(cfv->vq_tx);
spin_lock_irqsave(&cfv->tx_lock, flags);
/* Flow-off check takes into account number of cpus to make sure
* virtqueue will not be overfilled in any possible smp conditions.
*
* Flow-on is triggered when sufficient buffers are freed
*/
if (unlikely(cfv->vq_tx->num_free <= num_present_cpus())) {
flow_off = true;
cfv->stats.tx_full_ring++;
}
/* If we run out of memory, we release the memory reserve and retry
* allocation.
*/
buf_info = cfv_alloc_and_copy_to_shm(cfv, skb, &sg);
if (unlikely(!buf_info)) {
cfv->stats.tx_no_mem++;
flow_off = true;
if (cfv->reserved_mem && cfv->genpool) {
gen_pool_free(cfv->genpool, cfv->reserved_mem,
cfv->reserved_size);
cfv->reserved_mem = 0;
buf_info = cfv_alloc_and_copy_to_shm(cfv, skb, &sg);
}
}
if (unlikely(flow_off)) {
/* Turn flow on when a 1/4 of the descriptors are released */
cfv->watermark_tx = virtqueue_get_vring_size(cfv->vq_tx) / 4;
/* Enable notifications of recycled TX buffers */
virtqueue_enable_cb(cfv->vq_tx);
netif_tx_stop_all_queues(netdev);
}
if (unlikely(!buf_info)) {
/* If the memory reserve does it's job, this shouldn't happen */
netdev_warn(cfv->ndev, "Out of gen_pool memory\n");
goto err;
}
ret = virtqueue_add_outbuf(cfv->vq_tx, &sg, 1, buf_info, GFP_ATOMIC);
if (unlikely((ret < 0))) {
/* If flow control works, this shouldn't happen */
netdev_warn(cfv->ndev, "Failed adding buffer to TX vring:%d\n",
ret);
goto err;
}
/* update netdev statistics */
cfv->ndev->stats.tx_packets++;
cfv->ndev->stats.tx_bytes += skb->len;
spin_unlock_irqrestore(&cfv->tx_lock, flags);
/* tell the remote processor it has a pending message to read */
virtqueue_kick(cfv->vq_tx);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
err:
spin_unlock_irqrestore(&cfv->tx_lock, flags);
cfv->ndev->stats.tx_dropped++;
free_buf_info(cfv, buf_info);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
int
CommOS_StartIO(const char *dispatchTaskName,
CommOSDispatchFunc dispatchFunc,
unsigned int intervalMillis,
unsigned int maxCycles,
const char *aioTaskName)
{
int rc;
int cpu;
if (running) {
CommOS_Debug(("%s: I/O tasks already running.\n", __FUNCTION__));
return 0;
}
if (!dispatchFunc) {
CommOS_Log(("%s: a NULL Dispatch handler was passed.\n", __FUNCTION__));
return -1;
}
dispatch = dispatchFunc;
if (intervalMillis == 0) {
intervalMillis = 4;
}
if ((dispatchInterval = msecs_to_jiffies(intervalMillis)) < 1) {
dispatchInterval = 1;
}
if (maxCycles > DISPATCH_MAX_CYCLES) {
dispatchMaxCycles = DISPATCH_MAX_CYCLES;
} else if (maxCycles > 0) {
dispatchMaxCycles = maxCycles;
}
CommOS_Debug(("%s: Interval millis %u (jif:%u).\n", __FUNCTION__,
intervalMillis, dispatchInterval));
CommOS_Debug(("%s: Max cycles %u.\n", __FUNCTION__, dispatchMaxCycles));
numCpus = num_present_cpus();
dispatchWQ = CreateWorkqueue(dispatchTaskName);
if (!dispatchWQ) {
CommOS_Log(("%s: Couldn't create %s task(s).\n", __FUNCTION__,
dispatchTaskName));
return -1;
}
if (aioTaskName) {
aioWQ = CreateWorkqueue(aioTaskName);
if (!aioWQ) {
CommOS_Log(("%s: Couldn't create %s task(s).\n", __FUNCTION__,
aioTaskName));
DestroyWorkqueue(dispatchWQ);
return -1;
}
} else {
aioWQ = NULL;
}
running = 1;
for (cpu = 0; cpu < numCpus; cpu++) {
CommOS_InitWork(&dispatchWorksNow[cpu], DispatchWrapper);
CommOS_InitWork(&dispatchWorks[cpu], DispatchWrapper);
rc = QueueDelayedWorkOn(cpu, dispatchWQ,
&dispatchWorks[cpu],
dispatchInterval);
if (rc != 0) {
CommOS_StopIO();
return -1;
}
}
CommOS_Log(("%s: Created I/O task(s) successfully.\n", __FUNCTION__));
return 0;
}
static int __init parisc_init(void)
{
u32 osid = (OS_ID_LINUX << 16);
parisc_proc_mkdir();
parisc_init_resources();
do_device_inventory(); /* probe for hardware */
parisc_pdc_chassis_init();
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BSTART);
/* tell PDC we're Linux. Nevermind failure. */
pdc_stable_write(0x40, &osid, sizeof(osid));
/* start with known state */
flush_cache_all_local();
flush_tlb_all_local(NULL);
processor_init();
#ifdef CONFIG_SMP
pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n",
num_online_cpus(), num_present_cpus(),
#else
pr_info("CPU(s): 1 x %s at %d.%06d MHz\n",
#endif
boot_cpu_data.cpu_name,
boot_cpu_data.cpu_hz / 1000000,
boot_cpu_data.cpu_hz % 1000000 );
parisc_setup_cache_timing();
/* These are in a non-obvious order, will fix when we have an iotree */
#if defined(CONFIG_IOSAPIC)
iosapic_init();
#endif
#if defined(CONFIG_IOMMU_SBA)
sba_init();
#endif
#if defined(CONFIG_PCI_LBA)
lba_init();
#endif
/* CCIO before any potential subdevices */
#if defined(CONFIG_IOMMU_CCIO)
ccio_init();
#endif
/*
* Need to register Asp & Wax before the EISA adapters for the IRQ
* regions. EISA must come before PCI to be sure it gets IRQ region
* 0.
*/
#if defined(CONFIG_GSC_LASI) || defined(CONFIG_GSC_WAX)
gsc_init();
#endif
#ifdef CONFIG_EISA
eisa_init();
#endif
#if defined(CONFIG_HPPB)
hppb_init();
#endif
#if defined(CONFIG_GSC_DINO)
dino_init();
#endif
#ifdef CONFIG_CHASSIS_LCD_LED
register_led_regions(); /* register LED port info in procfs */
#endif
return 0;
}
int init_mmdc_settings(struct platform_device *busfreq_pdev)
{
struct device *dev = &busfreq_pdev->dev;
struct platform_device *ocram_dev;
unsigned int iram_paddr;
int i, err;
u32 cpu;
struct device_node *node;
struct gen_pool *iram_pool;
node = of_find_compatible_node(NULL, NULL, "fsl,imx6q-mmdc-combine");
if (!node) {
printk(KERN_ERR "failed to find imx6q-mmdc device tree data!\n");
return -EINVAL;
}
mmdc_base = of_iomap(node, 0);
WARN(!mmdc_base, "unable to map mmdc registers\n");
node = NULL;
if (cpu_is_imx6q())
node = of_find_compatible_node(NULL, NULL, "fsl,imx6q-iomuxc");
if (cpu_is_imx6dl())
node = of_find_compatible_node(NULL, NULL,
"fsl,imx6dl-iomuxc");
if (!node) {
printk(KERN_ERR "failed to find imx6q-iomux device tree data!\n");
return -EINVAL;
}
iomux_base = of_iomap(node, 0);
WARN(!iomux_base, "unable to map iomux registers\n");
node = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
if (!node) {
printk(KERN_ERR "failed to find imx6q-ccm device tree data!\n");
return -EINVAL;
}
ccm_base = of_iomap(node, 0);
WARN(!mmdc_base, "unable to map mmdc registers\n");
node = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
if (!node) {
printk(KERN_ERR "failed to find imx6q-pl310-cache device tree data!\n");
return -EINVAL;
}
l2_base = of_iomap(node, 0);
WARN(!mmdc_base, "unable to map mmdc registers\n");
node = NULL;
node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
if (!node) {
printk(KERN_ERR "failed to find imx6q-a9-gic device tree data!\n");
return -EINVAL;
}
gic_dist_base = of_iomap(node, 0);
WARN(!gic_dist_base, "unable to map gic dist registers\n");
if (cpu_is_imx6q())
ddr_settings_size = ARRAY_SIZE(ddr3_dll_mx6q) +
ARRAY_SIZE(ddr3_calibration);
if (cpu_is_imx6dl())
ddr_settings_size = ARRAY_SIZE(ddr3_dll_mx6dl) +
ARRAY_SIZE(ddr3_calibration);
normal_mmdc_settings = kmalloc((ddr_settings_size * 8), GFP_KERNEL);
if (cpu_is_imx6q()) {
memcpy(normal_mmdc_settings, ddr3_dll_mx6q,
sizeof(ddr3_dll_mx6q));
memcpy(((char *)normal_mmdc_settings + sizeof(ddr3_dll_mx6q)),
ddr3_calibration, sizeof(ddr3_calibration));
}
if (cpu_is_imx6dl()) {
memcpy(normal_mmdc_settings, ddr3_dll_mx6dl,
sizeof(ddr3_dll_mx6dl));
memcpy(((char *)normal_mmdc_settings + sizeof(ddr3_dll_mx6dl)),
ddr3_calibration, sizeof(ddr3_calibration));
}
/* store the original DDR settings at boot. */
for (i = 0; i < ddr_settings_size; i++) {
/*
* writes via command mode register cannot be read back.
* hence hardcode them in the initial static array.
* this may require modification on a per customer basis.
*/
if (normal_mmdc_settings[i][0] != 0x1C)
normal_mmdc_settings[i][1] =
readl_relaxed(mmdc_base
+ normal_mmdc_settings[i][0]);
}
irqs_used = devm_kzalloc(dev, sizeof(u32) * num_present_cpus(),
GFP_KERNEL);
for_each_present_cpu(cpu) {
int irq;
/*
* set up a reserved interrupt to get all
* the active cores into a WFE state
* before changing the DDR frequency.
*/
irq = platform_get_irq(busfreq_pdev, cpu);
err = request_irq(irq, wait_in_wfe_irq,
IRQF_PERCPU, "mmdc_1", NULL);
if (err) {
dev_err(dev,
"Busfreq:request_irq failed %d, err = %d\n",
irq, err);
return err;
}
err = irq_set_affinity(irq, cpumask_of(cpu));
if (err) {
dev_err(dev,
"Busfreq: Cannot set irq affinity irq=%d,\n",
irq);
return err;
}
irqs_used[cpu] = irq;
}
node = NULL;
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
dev_err(dev, "%s: failed to find ocram node\n",
__func__);
return -EINVAL;
}
ocram_dev = of_find_device_by_node(node);
if (!ocram_dev) {
dev_err(dev, "failed to find ocram device!\n");
return -EINVAL;
}
iram_pool = dev_get_gen_pool(&ocram_dev->dev);
if (!iram_pool) {
dev_err(dev, "iram pool unavailable!\n");
return -EINVAL;
}
iomux_settings_size = ARRAY_SIZE(iomux_offsets_mx6q);
iram_iomux_settings = gen_pool_alloc(iram_pool,
(iomux_settings_size * 8) + 8);
if (!iram_iomux_settings) {
dev_err(dev, "unable to alloc iram for IOMUX settings!\n");
return -ENOMEM;
}
/*
* Allocate extra space to store the number of entries in the
* ddr_settings plus 4 extra regsiter information that needs
* to be passed to the frequency change code.
* sizeof(iram_ddr_settings) = sizeof(ddr_settings) +
* entries in ddr_settings + 16.
* The last 4 enties store the addresses of the registers:
* CCM_BASE_ADDR
* MMDC_BASE_ADDR
* IOMUX_BASE_ADDR
* L2X0_BASE_ADDR
*/
iram_ddr_settings = gen_pool_alloc(iram_pool,
(ddr_settings_size * 8) + 8 + 32);
if (!iram_ddr_settings) {
dev_err(dev, "unable to alloc iram for ddr settings!\n");
return -ENOMEM;
}
i = ddr_settings_size + 1;
iram_ddr_settings[i][0] = (unsigned long)mmdc_base;
iram_ddr_settings[i+1][0] = (unsigned long)ccm_base;
iram_ddr_settings[i+2][0] = (unsigned long)iomux_base;
iram_ddr_settings[i+3][0] = (unsigned long)l2_base;
if (cpu_is_imx6q()) {
/* store the IOMUX settings at boot. */
for (i = 0; i < iomux_settings_size; i++) {
iomux_offsets_mx6q[i][1] =
readl_relaxed(iomux_base +
iomux_offsets_mx6q[i][0]);
iram_iomux_settings[i+1][0] = iomux_offsets_mx6q[i][0];
iram_iomux_settings[i+1][1] = iomux_offsets_mx6q[i][1];
}
}
if (cpu_is_imx6dl()) {
for (i = 0; i < iomux_settings_size; i++) {
iomux_offsets_mx6dl[i][1] =
readl_relaxed(iomux_base +
iomux_offsets_mx6dl[i][0]);
iram_iomux_settings[i+1][0] = iomux_offsets_mx6dl[i][0];
iram_iomux_settings[i+1][1] = iomux_offsets_mx6dl[i][1];
}
}
ddr_freq_change_iram_base = gen_pool_alloc(iram_pool,
DDR_FREQ_CHANGE_SIZE);
if (!ddr_freq_change_iram_base) {
dev_err(dev, "Cannot alloc iram for ddr freq change code!\n");
return -ENOMEM;
}
iram_paddr = gen_pool_virt_to_phys(iram_pool,
(unsigned long)ddr_freq_change_iram_base);
/*
* need to remap the area here since we want
* the memory region to be executable.
*/
ddr_freq_change_iram_base = __arm_ioremap(iram_paddr,
DDR_FREQ_CHANGE_SIZE,
MT_MEMORY_RWX_NONCACHED);
mx6_change_ddr_freq = (void *)fncpy(ddr_freq_change_iram_base,
&mx6_ddr3_freq_change, DDR_FREQ_CHANGE_SIZE);
curr_ddr_rate = ddr_normal_rate;
return 0;
}
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
/* Assume we're using HV mode when the HV module is loaded */
int hv_enabled = kvmppc_hv_ops ? 1 : 0;
if (kvm) {
/*
* Hooray - we know which VM type we're running on. Depend on
* that rather than the guess above.
*/
hv_enabled = is_kvmppc_hv_enabled(kvm);
}
switch (ext) {
#ifdef CONFIG_BOOKE
case KVM_CAP_PPC_BOOKE_SREGS:
case KVM_CAP_PPC_BOOKE_WATCHDOG:
case KVM_CAP_PPC_EPR:
#else
case KVM_CAP_PPC_SEGSTATE:
case KVM_CAP_PPC_HIOR:
case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:
case KVM_CAP_PPC_IRQ_LEVEL:
case KVM_CAP_ENABLE_CAP:
case KVM_CAP_ENABLE_CAP_VM:
case KVM_CAP_ONE_REG:
case KVM_CAP_IOEVENTFD:
case KVM_CAP_DEVICE_CTRL:
case KVM_CAP_IMMEDIATE_EXIT:
r = 1;
break;
case KVM_CAP_PPC_PAIRED_SINGLES:
case KVM_CAP_PPC_OSI:
case KVM_CAP_PPC_GET_PVINFO:
#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_CAP_SW_TLB:
#endif
/* We support this only for PR */
r = !hv_enabled;
break;
#ifdef CONFIG_KVM_MPIC
case KVM_CAP_IRQ_MPIC:
r = 1;
break;
#endif
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_CAP_SPAPR_TCE:
case KVM_CAP_SPAPR_TCE_64:
/* fallthrough */
case KVM_CAP_SPAPR_TCE_VFIO:
case KVM_CAP_PPC_RTAS:
case KVM_CAP_PPC_FIXUP_HCALL:
case KVM_CAP_PPC_ENABLE_HCALL:
#ifdef CONFIG_KVM_XICS
case KVM_CAP_IRQ_XICS:
#endif
case KVM_CAP_PPC_GET_CPU_CHAR:
r = 1;
break;
case KVM_CAP_PPC_ALLOC_HTAB:
r = hv_enabled;
break;
#endif /* CONFIG_PPC_BOOK3S_64 */
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_SMT:
r = 0;
if (kvm) {
if (kvm->arch.emul_smt_mode > 1)
r = kvm->arch.emul_smt_mode;
else
r = kvm->arch.smt_mode;
} else if (hv_enabled) {
if (cpu_has_feature(CPU_FTR_ARCH_300))
r = 1;
else
r = threads_per_subcore;
}
break;
case KVM_CAP_PPC_SMT_POSSIBLE:
r = 1;
if (hv_enabled) {
if (!cpu_has_feature(CPU_FTR_ARCH_300))
r = ((threads_per_subcore << 1) - 1);
else
/* P9 can emulate dbells, so allow any mode */
r = 8 | 4 | 2 | 1;
}
break;
case KVM_CAP_PPC_RMA:
r = 0;
break;
case KVM_CAP_PPC_HWRNG:
r = kvmppc_hwrng_present();
break;
case KVM_CAP_PPC_MMU_RADIX:
r = !!(hv_enabled && radix_enabled());
break;
case KVM_CAP_PPC_MMU_HASH_V3:
r = !!(hv_enabled && cpu_has_feature(CPU_FTR_ARCH_300));
break;
#endif
case KVM_CAP_SYNC_MMU:
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
r = hv_enabled;
#elif defined(KVM_ARCH_WANT_MMU_NOTIFIER)
r = 1;
#else
r = 0;
#endif
break;
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_HTAB_FD:
r = hv_enabled;
break;
#endif
case KVM_CAP_NR_VCPUS:
/*
* Recommending a number of CPUs is somewhat arbitrary; we
* return the number of present CPUs for -HV (since a host
* will have secondary threads "offline"), and for other KVM
* implementations just count online CPUs.
*/
if (hv_enabled)
r = num_present_cpus();
else
r = num_online_cpus();
break;
case KVM_CAP_NR_MEMSLOTS:
r = KVM_USER_MEM_SLOTS;
break;
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
#ifdef CONFIG_PPC_BOOK3S_64
case KVM_CAP_PPC_GET_SMMU_INFO:
r = 1;
break;
case KVM_CAP_SPAPR_MULTITCE:
r = 1;
break;
case KVM_CAP_SPAPR_RESIZE_HPT:
r = !!hv_enabled;
break;
#endif
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
case KVM_CAP_PPC_FWNMI:
r = hv_enabled;
break;
#endif
case KVM_CAP_PPC_HTM:
r = hv_enabled &&
(cur_cpu_spec->cpu_user_features2 & PPC_FEATURE2_HTM_COMP);
break;
default:
r = 0;
break;
}
return r;
}
static void crash_kexec_prepare_cpus(int cpu)
{
unsigned int msecs;
unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
int tries = 0;
int (*old_handler)(struct pt_regs *regs);
printk(KERN_EMERG "Sending IPI to other CPUs\n");
if (crash_wake_offline)
ncpus = num_present_cpus() - 1;
crash_send_ipi(crash_ipi_callback);
smp_wmb();
again:
/*
* FIXME: Until we will have the way to stop other CPUs reliably,
* the crash CPU will send an IPI and wait for other CPUs to
* respond.
*/
msecs = IPI_TIMEOUT;
while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0))
mdelay(1);
/* Would it be better to replace the trap vector here? */
if (atomic_read(&cpus_in_crash) >= ncpus) {
printk(KERN_EMERG "IPI complete\n");
return;
}
printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n",
ncpus - atomic_read(&cpus_in_crash));
/*
* If we have a panic timeout set then we can't wait indefinitely
* for someone to activate system reset. We also give up on the
* second time through if system reset fail to work.
*/
if ((panic_timeout > 0) || (tries > 0))
return;
/*
* A system reset will cause all CPUs to take an 0x100 exception.
* The primary CPU returns here via setjmp, and the secondary
* CPUs reexecute the crash_kexec_secondary path.
*/
old_handler = __debugger;
__debugger = handle_fault;
crash_shutdown_cpu = smp_processor_id();
if (setjmp(crash_shutdown_buf) == 0) {
printk(KERN_EMERG "Activate system reset (dumprestart) "
"to stop other cpu(s)\n");
/*
* A system reset will force all CPUs to execute the
* crash code again. We need to reset cpus_in_crash so we
* wait for everyone to do this.
*/
atomic_set(&cpus_in_crash, 0);
smp_mb();
while (atomic_read(&cpus_in_crash) < ncpus)
cpu_relax();
}
crash_shutdown_cpu = -1;
__debugger = old_handler;
tries++;
goto again;
}
/**
* setup_cpu_maps - initialize the following cpu maps:
* cpu_possible_map
* cpu_present_map
* cpu_sibling_map
*
* Having the possible map set up early allows us to restrict allocations
* of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
*
* We do not initialize the online map here; cpus set their own bits in
* cpu_online_map as they come up.
*
* This function is valid only for Open Firmware systems. finish_device_tree
* must be called before using this.
*
* While we're here, we may as well set the "physical" cpu ids in the paca.
*/
static void __init setup_cpu_maps(void)
{
struct device_node *dn = NULL;
int cpu = 0;
check_smt_enabled();
while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
u32 *intserv;
int j, len = sizeof(u32), nthreads;
intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
&len);
if (!intserv)
intserv = (u32 *)get_property(dn, "reg", NULL);
nthreads = len / sizeof(u32);
for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
/*
* Only spin up secondary threads if SMT is enabled.
* We must leave space in the logical map for the
* threads. cpu_present_map is fixed up later
* after smp init.
*/
if (j == 0 || smt_enabled_at_boot) {
cpu_set(cpu, cpu_present_map);
}
set_hard_smp_processor_id(cpu, intserv[j]);
cpu_set(cpu, cpu_possible_map);
cpu++;
}
}
/*
* On pSeries LPAR, we need to know how many cpus
* could possibly be added to this partition.
*/
if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
(dn = of_find_node_by_path("/rtas"))) {
int num_addr_cell, num_size_cell, maxcpus;
unsigned int *ireg;
num_addr_cell = prom_n_addr_cells(dn);
num_size_cell = prom_n_size_cells(dn);
ireg = (unsigned int *)
get_property(dn, "ibm,lrdr-capacity", NULL);
if (!ireg)
goto out;
maxcpus = ireg[num_addr_cell + num_size_cell];
/* Double maxcpus for processors which have SMT capability */
if (cur_cpu_spec->cpu_features & CPU_FTR_SMT)
maxcpus *= 2;
if (maxcpus > NR_CPUS) {
printk(KERN_WARNING
"Partition configured for %d cpus, "
"operating system maximum is %d.\n",
maxcpus, NR_CPUS);
maxcpus = NR_CPUS;
} else
printk(KERN_INFO "Partition configured for %d cpus.\n",
maxcpus);
for (cpu = 0; cpu < maxcpus; cpu++)
cpu_set(cpu, cpu_possible_map);
out:
of_node_put(dn);
}
/*
* Do the sibling map; assume only two threads per processor.
*/
for_each_cpu(cpu) {
cpu_set(cpu, cpu_sibling_map[cpu]);
if (cur_cpu_spec->cpu_features & CPU_FTR_SMT)
cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
}
systemcfg->processorCount = num_present_cpus();
}
