void sysclk_init_opt(void)
{
sysclk_set_prescalers(CONFIG_SYSCLK_PSADIV,CONFIG_SYSCLK_PSBCDIV);
/* Loads 48MHz internal RC calibration value */
DFLLRC32M.CALA=nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(USBRCOSCA));
DFLLRC32M.CALB=nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(USBRCOSC));
osc_enable(OSC_ID_RC32MHZ);
osc_wait_ready(OSC_ID_RC32MHZ);
ccp_write_io((uint8_t *)&CLK.CTRL, CONFIG_SYSCLK_SOURCE);
OSC.DFLLCTRL &= ~(OSC_RC32MCREF_gm);
// Calibrate 32MRC at 48MHz using USB SOF
// 48MHz/1kHz=0xBB80
DFLLRC32M.COMP1=0x80;
DFLLRC32M.COMP2=0xBB;
OSC.DFLLCTRL |= OSC_RC32MCREF_USBSOF_gc;
DFLLRC32M.CTRL |= DFLL_ENABLE_bm;
}
void sysclk_init(void)
{
uint8_t *reg = (uint8_t *)&PR.PRGEN;
uint8_t i;
#ifdef CONFIG_OSC_RC32_CAL
uint16_t cal;
#endif
bool need_rc2mhz = false;
/* Turn off all peripheral clocks that can be turned off. */
for (i = 0; i <= SYSCLK_PORT_F; i++) {
*(reg++) = 0xff;
}
/* Set up system clock prescalers if different from defaults */
if ((CONFIG_SYSCLK_PSADIV != SYSCLK_PSADIV_1)
|| (CONFIG_SYSCLK_PSBCDIV != SYSCLK_PSBCDIV_1_1)) {
sysclk_set_prescalers(CONFIG_SYSCLK_PSADIV,
CONFIG_SYSCLK_PSBCDIV);
}
#if (CONFIG_OSC_RC32_CAL==48000000UL)
MSB(cal) = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(USBRCOSC));
LSB(cal) = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(USBRCOSCA));
/*
* If a device has an uncalibrated value in the
* production signature row (early sample part), load a
* sane default calibration value.
*/
if (cal == 0xFFFF) {
cal = 0x2340;
}
osc_user_calibration(OSC_ID_RC32MHZ,cal);
#endif
/*
* Switch to the selected initial system clock source, unless
* the default internal 2 MHz oscillator is selected.
*/
if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_RC2MHZ) {
need_rc2mhz = true;
} else {
switch (CONFIG_SYSCLK_SOURCE) {
case SYSCLK_SRC_RC32MHZ:
osc_enable(OSC_ID_RC32MHZ);
osc_wait_ready(OSC_ID_RC32MHZ);
#ifdef CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC
if (CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC
!= OSC_ID_USBSOF) {
osc_enable(CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC);
osc_wait_ready(CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC);
}
osc_enable_autocalibration(OSC_ID_RC32MHZ,
CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC);
#endif
break;
case SYSCLK_SRC_RC32KHZ:
osc_enable(OSC_ID_RC32KHZ);
osc_wait_ready(OSC_ID_RC32KHZ);
break;
case SYSCLK_SRC_XOSC:
osc_enable(OSC_ID_XOSC);
osc_wait_ready(OSC_ID_XOSC);
break;
#ifdef CONFIG_PLL0_SOURCE
case SYSCLK_SRC_PLL:
if (CONFIG_PLL0_SOURCE == PLL_SRC_RC2MHZ) {
need_rc2mhz = true;
}
pll_enable_config_defaults(0);
break;
#endif
default:
//unhandled_case(CONFIG_SYSCLK_SOURCE);
return;
}
ccp_write_io((uint8_t *)&CLK.CTRL, CONFIG_SYSCLK_SOURCE);
Assert(CLK.CTRL == CONFIG_SYSCLK_SOURCE);
}
if (need_rc2mhz) {
#ifdef CONFIG_OSC_AUTOCAL_RC2MHZ_REF_OSC
osc_enable(CONFIG_OSC_AUTOCAL_RC2MHZ_REF_OSC);
osc_wait_ready(CONFIG_OSC_AUTOCAL_RC2MHZ_REF_OSC);
osc_enable_autocalibration(OSC_ID_RC2MHZ,
CONFIG_OSC_AUTOCAL_RC2MHZ_REF_OSC);
#endif
} else {
osc_disable(OSC_ID_RC2MHZ);
}
#ifdef CONFIG_RTC_SOURCE
sysclk_rtcsrc_enable(CONFIG_RTC_SOURCE);
#endif
}
/**
* \brief Read the device serial
*
* This function returns the device serial stored in the device.
*
* \note This function is modifying the NVM.CMD register.
* If the application are using program space access in interrupts
* (__flash pointers in IAR EW or pgm_read_byte in GCC) interrupts
* needs to be disabled when running EEPROM access functions. If not
* the program space reads will be corrupted.
*
* \retval storage Pointer to the structure where to store the device serial
*/
void nvm_read_device_serial(struct nvm_device_serial *storage)
{
storage->lotnum0 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(LOTNUM0));
storage->lotnum1 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(LOTNUM1));
storage->lotnum2 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(LOTNUM2));
storage->lotnum3 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(LOTNUM3));
storage->lotnum4 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(LOTNUM4));
storage->lotnum5 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(LOTNUM5));
storage->wafnum = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(WAFNUM));
storage->coordx0 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(COORDX0));
storage->coordx1 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(COORDX1));
storage->coordy0 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(COORDY0));
storage->coordy1 = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(COORDY1));
}
void sysclk_init(void)
{
uint8_t *reg = (uint8_t *)&PR.PRGEN;
uint8_t i;
#ifdef CONFIG_OSC_RC32_CAL
uint16_t cal;
#endif
/* Turn off all peripheral clocks that can be turned off. */
for (i = 0; i <= SYSCLK_PORT_F; i++) {
*(reg++) = 0xff;
}
/* Set up system clock prescalers if different from defaults */
if ((CONFIG_SYSCLK_PSADIV != SYSCLK_PSADIV_1)
|| (CONFIG_SYSCLK_PSBCDIV != SYSCLK_PSBCDIV_1_1)) {
sysclk_set_prescalers(CONFIG_SYSCLK_PSADIV,
CONFIG_SYSCLK_PSBCDIV);
}
#if (CONFIG_OSC_RC32_CAL==48000000UL)
MSB(cal) = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(USBRCOSC));
LSB(cal) = nvm_read_production_signature_row(
nvm_get_production_signature_row_offset(USBRCOSCA));
/*
* If a device has an uncalibrated value in the
* production signature row (early sample part), load a
* sane default calibration value.
*
* MODIFIED 16-7-2012 by C.DOGGEN:
* - commented the if statement, otherwise the USART won't work
* - don't know exactly the problem, but this seems to be a workaround.
*/
if (cal == 0xFFFF) {
cal = 0x2340;
}
osc_user_calibration(OSC_ID_RC32MHZ,cal);
#endif
/*
* Switch to the selected initial system clock source, unless
* the default internal 2 MHz oscillator is selected.
*/
if (CONFIG_SYSCLK_SOURCE != SYSCLK_SRC_RC2MHZ) {
bool need_rc2mhz = false;
switch (CONFIG_SYSCLK_SOURCE) {
case SYSCLK_SRC_RC32MHZ:
osc_enable(OSC_ID_RC32MHZ);
osc_wait_ready(OSC_ID_RC32MHZ);
break;
case SYSCLK_SRC_RC32KHZ:
osc_enable(OSC_ID_RC32KHZ);
osc_wait_ready(OSC_ID_RC32KHZ);
break;
case SYSCLK_SRC_XOSC:
osc_enable(OSC_ID_XOSC);
osc_wait_ready(OSC_ID_XOSC);
break;
#ifdef CONFIG_PLL0_SOURCE
case SYSCLK_SRC_PLL:
if (CONFIG_PLL0_SOURCE == PLL_SRC_RC2MHZ) {
need_rc2mhz = true;
}
pll_enable_config_defaults(0);
break;
#endif
default:
//unhandled_case(CONFIG_SYSCLK_SOURCE);
return;
}
ccp_write_io((uint8_t *)&CLK.CTRL, CONFIG_SYSCLK_SOURCE);
Assert(CLK.CTRL == CONFIG_SYSCLK_SOURCE);
#ifdef CONFIG_OSC_AUTOCAL
osc_enable_autocalibration(CONFIG_OSC_AUTOCAL,CONFIG_OSC_AUTOCAL_REF_OSC);
if (CONFIG_OSC_AUTOCAL == OSC_ID_RC2MHZ
|| CONFIG_OSC_AUTOCAL_REF_OSC == OSC_ID_RC2MHZ) {
need_rc2mhz = true;
}
#endif
if (!need_rc2mhz) {
osc_disable(OSC_ID_RC2MHZ);
}
}
}
