C++ (Cpp) of_board_is_skuf Beispiele

Beispiel #1

0

Datei anzeigen

Datei: board-mem-gpiomux.c Projekt: cpflayan/htc_kernel_a3

void __init msm8226_htc_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_slimbus_config,
			ARRAY_SIZE(msm_slimbus_config));
	msm_gpiomux_install(msm_aud_configs,
			ARRAY_SIZE(msm_aud_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_sdc3_install();

#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119;
		msm_hsic_configs[1].gpio = 120;
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}

Beispiel #2

0

Datei anzeigen

Datei: board-victor-gpiomux.c Projekt: Cosimo82/Fulgor_Kernel_Lollipop

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));
	else
		msm_gpiomux_install(msm_nfc_configs,
				ARRAY_SIZE(msm_nfc_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_sdc3_install();
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));

	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));
	msm_gpiomux_install(muic_gpio_config, ARRAY_SIZE(muic_gpio_config));

	msm_gpiomux_install(msm_codec_int_gpio_configs, ARRAY_SIZE(msm_codec_int_gpio_configs));
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif

	msm_gpiomux_install(chg_pm8226_configs, ARRAY_SIZE(chg_pm8226_configs));

	if(!poweroff_charging)
	msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));

        msm_gpiomux_install(msm_lcd_det_configs, ARRAY_SIZE(msm_lcd_det_configs));
	msm_gpiomux_install_nowrite(msm_lcd_configs,ARRAY_SIZE(msm_lcd_configs));
}

Beispiel #3

0

Datei anzeigen

Datei: board-8226-gpiomux.c Projekt: Hashcode/android_kernel_samsung_hlte

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#endif
	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
				if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_BERLUTI3G_EUR)
				if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
				if ( system_rev >= 0 && system_rev < 5)
#endif

		{
			msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
			msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
		}
#endif
}

Beispiel #4

0

Datei anzeigen

Datei: board-8226-gpiomux.c Projekt: 1801648284/Xiaomi_Kernel_OpenSource

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_install(hs_uart_sw_configs, ARRAY_SIZE(hs_uart_sw_configs));

	msm_gpiomux_sdc3_install();

	msm_gpiomux_extovp_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}

Beispiel #5

0

Datei anzeigen

Datei: board-atlantic-gpiomux.c Projekt: MI2S/android_kernel_samsung_ms013g

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

/* Battery charging and BMS GPIO */
	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));

#if defined (CONFIG_SEC_ATLANTICLTE_COMMON)
        msm_gpiomux_install(msm_lte_chg_configs, ARRAY_SIZE(msm_lte_chg_configs));
#endif

#if defined (CONFIG_SEC_ATLANTIC_PROJECT)
	msm_gpiomux_install(msm_chg_det_configs, ARRAY_SIZE(msm_chg_det_configs));
#endif

#if !defined (CONFIG_MACH_ATLANTIC3GEUR_OPEN)
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));
#endif

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#if defined(CONFIG_SEC_ATLANTICLTE_COMMON)
	msm_gpiomux_install(expander_configs,
			ARRAY_SIZE(expander_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));

		msm_gpiomux_install(msm_keyboad_cypress_configs,
				ARRAY_SIZE(msm_keyboad_cypress_configs));
#else
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	if (system_rev >= 1)
		msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
	else
		msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

#ifdef CONFIG_SENSORS_VFS61XX
	msm_gpiomux_install(msm_fingerprint_configs, ARRAY_SIZE(msm_fingerprint_configs));
#endif

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));
/*
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
*/
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));

	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_ES325_ATLANTIC
	msm_gpiomux_install(msm_es325_config, ARRAY_SIZE(msm_es325_config));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
	msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
#if defined (CONFIG_MACH_ATLANTIC3GEUR_OPEN)
	msm_gpiomux_install(nc_configs, ARRAY_SIZE(nc_configs));
#endif
	/* Install HW_REV GPIO configurations */
	msm_gpiomux_install(atlantic_hw_rev_cfgs, ARRAY_SIZE(atlantic_hw_rev_cfgs));
	/* Install NC GPIO configurations */
#if defined(CONFIG_MACH_ATLANTICLTE_ATT)
        msm_gpiomux_install(atlantic_att_nc_gpios, ARRAY_SIZE(atlantic_att_nc_gpios));
#endif
}

Beispiel #6

0

Datei anzeigen

Datei: board-8226-gpiomux.c Projekt: SamsungMSM8226/android_kernel_samsung_ms013g-jb

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_MS01_CHN_CTC) \
    || defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
	msm_gpiomux_install(msm_hall_configs,
			ARRAY_SIZE(msm_hall_configs));
#endif

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_blsp_configs,
			ARRAY_SIZE(msm_qrd_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MS01_CHN_CTC) \
    || defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
		msm_gpiomux_install(msm8226_tx_gtr_configs,
					ARRAY_SIZE(msm8226_tx_gtr_configs));
		msm_gpiomux_install(muic_i2c_configs,
					ARRAY_SIZE(muic_i2c_configs));
#endif

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_goodix_configs,
				ARRAY_SIZE(msm_qrd_goodix_configs));

	else
#if defined(CONFIG_TOUCHSCREEN_ZINITIX_BT531)
		msm_gpiomux_install(msm_zinitixs_configs,
			ARRAY_SIZE(msm_zinitixs_configs));
#elif defined(CONFIG_TOUCHSCREEN_ATMEL_MXTS)
		msm_gpiomux_install(msm_atmel_configs,
			ARRAY_SIZE(msm_atmel_configs));
#elif defined(CONFIG_TOUCHSCREEN_MMS144)
		msm_gpiomux_install(msm_melfas_configs,
			ARRAY_SIZE(msm_melfas_configs));
#else
		msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

#if defined(CONFIG_FB_MSM_MDSS_SHARP_HD_PANEL)\
	|| defined(CONFIG_MACH_MILLET3G_EUR)
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
#endif
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
/*
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));
*/
#if defined(CONFIG_MACH_MILLET3G_EUR)
	msm_gpiomux_install(msm_speaker_enable_gpio_configs, ARRAY_SIZE(msm_speaker_enable_gpio_configs));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

#else
	msm_gpiomux_install(msm_nc_configs,
	ARRAY_SIZE(msm_nc_configs));
#endif

#if defined(CONFIG_YAS_ACC_DRIVER_BMA250) || defined(CONFIG_INPUT_MPU6500) || \
defined(CONFIG_PROXIMITY_SENSOR) || defined (CONFIG_SENSORS_HSCDTD008A)
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));
#endif

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_sdc3_install();
	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
	msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
#endif

#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)||defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ)
	msm_gpiomux_install(msm8226_nc_gpio_cfgs, ARRAY_SIZE(msm8226_nc_gpio_cfgs));
#endif

#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#if defined(CONFIG_MACH_MS01_EUR_3G)
	msm_gpiomux_install(ms01_nc_gpio_cfgs, ARRAY_SIZE(ms01_nc_gpio_cfgs));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
	if ( system_rev >= 4 ) {
		msm_gpiomux_install(ms01_ctc_nc_gpio_cfgs, ARRAY_SIZE(ms01_ctc_nc_gpio_cfgs));
	}
#elif defined(CONFIG_MACH_CRATERQ)
	msm_gpiomux_install(craterq_gpio_configs, ARRAY_SIZE(craterq_gpio_configs));
#endif
}

Beispiel #7

0

Datei anzeigen

Datei: board-degas-gpiomux.c Projekt: LGaljo/android_kernel_samsung_s3ve3g

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#if defined (CONFIG_MACH_MILLETLTE_VZW)
	msm_gpiomux_install(milletltevzw_gpio_10, ARRAY_SIZE(milletltevzw_gpio_10));
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));

		msm_gpiomux_install(msm_keyboad_cypress_configs,
				ARRAY_SIZE(msm_keyboad_cypress_configs));
#elif defined(CONFIG_SEC_MILLET_PROJECT)
msm_gpiomux_install(msm_melfas_configs,
				ARRAY_SIZE(msm_melfas_configs));
#else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

#if !defined (CONFIG_SEC_MILLET_PROJECT)
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));
#endif

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
	if ( system_rev >= 0 && system_rev < 3) {
		msm_gpiomux_install(light_prox_config, ARRAY_SIZE(light_prox_config));
		msm_gpiomux_install(irled_i2c_scl_config,
						ARRAY_SIZE(irled_i2c_scl_config));
	} else {
		msm_gpiomux_install(nc_light_prox_config, ARRAY_SIZE(nc_light_prox_config));
#if defined (CONFIG_MACH_MILLETLTE_VZW) || defined(CONFIG_SEC_MILLETWIFI_COMMON)
		msm_gpiomux_install(irled_i2c_scl_config,
						ARRAY_SIZE(irled_i2c_scl_config));
#endif
	}
#endif
	msm_gpiomux_sdc3_install();


	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
	msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
  #if defined (CONFIG_SEC_MILLETLTE_COMMON)
  if ( system_rev >= 3)
  {
    msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
  }
  #else
    msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
  #endif
#if defined (CONFIG_SEC_MILLETWIFI_COMMON)
	msm_gpiomux_install(milletwifi_nc_gpio_cfgs, ARRAY_SIZE(milletwifi_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_OPEN)
msm_gpiomux_install(millet_nc_gpio_cfgs, ARRAY_SIZE(millet_nc_gpio_cfgs));
if ( system_rev >= 3){
	msm_gpiomux_install(millet_nc3_gpio_cfgs, ARRAY_SIZE(millet_nc3_gpio_cfgs));
}
#endif
#if defined (CONFIG_MACH_MILLET3G_EUR)
if ( system_rev >= 2)
	msm_gpiomux_install(millet3g_nc_gpio_cfgs, ARRAY_SIZE(millet3g_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_VZW)
if ( system_rev >= 1)
	msm_gpiomux_install(milletltevzw_nc_gpio_cfgs, ARRAY_SIZE(milletltevzw_nc_gpio_cfgs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
	if(!poweroff_charging)
	msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
				if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR)
				if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
				if ( system_rev >= 0 && system_rev < 5)
#endif

		{
			msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
			msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
			msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
		}
#endif
}

Beispiel #8

0

Datei anzeigen

Datei: board-hestia-gpiomux.c Projekt: Jackeagle/android_kernel_sm_g800h_kk

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

/* Battery charging and BMS GPIO */
	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));

	msm_gpiomux_install(msm_hrm_configs,
		ARRAY_SIZE(msm_hrm_configs));

	msm_gpiomux_install(msm_sensorhub_configs,
		ARRAY_SIZE(msm_sensorhub_configs));

	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));

		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	/*
	 * gpio mux settings for the NC GPIOs
	 */
	msm_gpiomux_install(nc_gpio_cfgs,
			ARRAY_SIZE(nc_gpio_cfgs));

	msm_gpiomux_install(hw_chkbits_cfg, ARRAY_SIZE(hw_chkbits_cfg));
	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
		msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
}

Beispiel #9

0

Datei anzeigen

Datei: board-mega2-gpiomux.c Projekt: adis1313/android_kernel_samsung_msm8974

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));

	msm_gpiomux_install(muic_gpio_config, ARRAY_SIZE(muic_gpio_config));

	msm_gpiomux_install(tkey_led_gpio_configs, ARRAY_SIZE(tkey_led_gpio_configs));

	/* Cover ID */
	msm_gpiomux_install(msm_cover_id_configs,
		ARRAY_SIZE(msm_cover_id_configs));

	msm_gpiomux_install(hw_chk_bit_configs, ARRAY_SIZE(hw_chk_bit_configs));

	msm_gpiomux_install(tsp_id_configs, ARRAY_SIZE(tsp_id_configs));

#if defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif

	/*
	 * gpio mux settings for the NC GPIOs
	 */
	msm_gpiomux_install(gpio_nc_configs,
			ARRAY_SIZE(gpio_nc_configs));

#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98505
	msm_gpiomux_install(msm8226_max98504_i2c_configs,ARRAY_SIZE(msm8226_max98504_i2c_configs));
#endif
#ifdef CONFIG_LEDS_KTD2026
	msm_gpiomux_install(msm_ktd2026_i2c_configs,ARRAY_SIZE(msm_ktd2026_i2c_configs));
#endif
}

Beispiel #10

0

Datei anzeigen

Datei: board-degas-gpiomux.c Projekt: Illusion-MOD/SM-G710K_Illusion_kernel

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_melfas_configs,
				ARRAY_SIZE(msm_melfas_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));
#endif
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

#if defined (CONFIG_SEC_DEGASLTE_COMMON)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(irled_i2c_scl_config, ARRAY_SIZE(irled_i2c_scl_config));
#endif
	msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
#endif
	msm_gpiomux_sdc3_install();


	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
	msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
	if(!poweroff_charging)
		msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
	msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
	msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
	msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
#endif
#if defined (CONFIG_MACH_DEGASLTE_SPR) || defined(CONFIG_MACH_DEGASLTE_VZW) || defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(degaslte_spr_nc_gpios, ARRAY_SIZE(degaslte_spr_nc_gpios));
	msm_gpiomux_install(degasltespr_gpio_10, ARRAY_SIZE(degasltespr_gpio_10));
#endif

#if defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(degaslte_sbm_gpios, ARRAY_SIZE(degaslte_sbm_gpios));
#endif
}

Beispiel #11

0

Datei anzeigen

Datei: board-a3ul-gpiomux.c Projekt: Arc-Team/android_kernel_htc_a11

void __init msm8226_htc_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

//htc audio ++
	msm_gpiomux_install(msm_slimbus_config,
			ARRAY_SIZE(msm_slimbus_config));
	msm_gpiomux_install(msm_aud_configs,
			ARRAY_SIZE(msm_aud_configs));
//htc audio --

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

#if 0 /* it will make gpio low and fail to get batt_id */
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

	msm_gpiomux_sdc3_install();

	msm_gpiomux_install(debug_uart_configs, ARRAY_SIZE(debug_uart_configs));
	msm_gpiomux_install(ncgpio_configs, ARRAY_SIZE(ncgpio_configs));

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}