void jit_openlase_trace_free(t_jit_openlase_trace *x)
{
	if (x->trace_ctx != NULL)
		olTraceDeinit(x->trace_ctx);
	x->trace_ctx = NULL;
	
	olShutdown();
	
	systhread_mutex_free(x->mutex);
}
Beispiel #2
0
int main (int argc, char *argv[])
{
	OLRenderParams params;

	memset(&params, 0, sizeof params);
	params.rate = 48000;
	params.on_speed = 2.0/100.0;
	params.off_speed = 2.0/30.0;
	params.start_wait = 4;
	params.start_dwell = 3;
	params.curve_dwell = 0;
	params.corner_dwell = 4;
	params.curve_angle = cosf(30.0*(M_PI/180.0)); // 30 deg
	params.end_dwell = 2;
	params.end_wait = 5;
	params.snap = 1/100000.0;
	params.render_flags = RENDER_GRAYSCALE;

	if(olInit(3, 30000) < 0)
		return 1;

	olSetRenderParams(&params);

	float time = 0;
	float ftime;
	int i;

	int frames = 0;

	int points = 25;

	while(1) {
		olLoadIdentity();

		int total_y = (points / 12.0 * 7.0 + 1);

		for (i=0; i<points; i++) {
			int octave = i/12;
			float y = (octave * 7 + pos[i%12]) * 2.0 / (total_y) - 1.0;
			float x = offs[i%12] * 0.1;
			olDot(x, y, 30, C_WHITE);
		}

		ftime = olRenderFrame(60);
		frames++;
		time += ftime;
		printf("Frame time: %f, FPS:%f\n", ftime, frames/time);
	}

	olShutdown();
	exit (0);
}
Beispiel #3
0
int main (int argc, char *argv[])
{
	OLRenderParams params;
	AVFrame *frame;
	int i;

	// Register all formats and codecs
	av_register_all();

	memset(&params, 0, sizeof params);
	params.rate = 48000;
	params.on_speed = 2.0/100.0;
	params.off_speed = 2.0/15.0;
	params.start_wait = 8;
	params.end_wait = 3;
	params.snap = 1/120.0;
	params.render_flags = RENDER_GRAYSCALE;
	params.min_length = 4;
	params.start_dwell = 2;
	params.end_dwell = 2;

	float snap_pix = 3;
	float aspect = 0;
	float framerate = 0;
	float overscan = 0;
	int thresh_dark = 60;
	int thresh_light = 160;
	int sw_dark = 100;
	int sw_light = 256;
	int decimate = 2;
	int edge_off = 0;

	int optchar;

	OLTraceParams tparams = {
		.mode = OL_TRACE_THRESHOLD,
		.sigma = 0,
		.threshold2 = 50
	};

	while ((optchar = getopt(argc, argv, "hct:T:b:w:B:W:O:d:m:S:E:D:g:s:p:a:r:R:o:v:")) != -1) {
		switch (optchar) {
			case 'h':
			case '?':
				usage(argv[0]);
				return 0;
			case 'c':
				tparams.mode = OL_TRACE_CANNY;
				tparams.sigma = 1;
				break;
			case 't':
				thresh_dark = thresh_light = atoi(optarg);
				break;
			case 'T':
				tparams.threshold2 = atoi(optarg);
				break;
			case 'b':
				thresh_dark = atoi(optarg);
				break;
			case 'w':
				thresh_light = atoi(optarg);
				break;
			case 'B':
				sw_dark = atoi(optarg);
				break;
			case 'W':
				sw_light = atoi(optarg);
				break;
			case 'O':
				edge_off = atoi(optarg);
				break;
			case 'd':
				decimate = atoi(optarg);
				break;
			case 'm':
				params.min_length = atoi(optarg);
				break;
			case 'S':
				params.start_wait = atoi(optarg);
				break;
			case 'E':
				params.end_wait = atoi(optarg);
				break;
			case 'D':
				params.start_dwell = atoi(optarg);
				params.end_dwell = atoi(optarg);
				break;
			case 'g':
				tparams.sigma = atof(optarg);
				break;
			case 's':
				params.off_speed = 2.0f/atof(optarg);
				break;
			case 'p':
				snap_pix = atof(optarg);
				break;
			case 'a':
				aspect = atof(optarg);
				break;
			case 'r':
				framerate = atof(optarg);
				break;
			case 'R':
				params.max_framelen = params.rate/atof(optarg);
				break;
			case 'o':
				overscan = atof(optarg);
				break;
			case 'v':
				volume = atof(optarg);
				break;
		}
	}

	if (optind == argc) {
		usage(argv[0]);
		return 1;
	}

	if (av_vid_init(argv[optind]) != 0) {
		printf("Video open/init failed\n");
		return 1;
	}
	if (av_aud_init(argv[optind]) != 0) {
		printf("Audio open/init failed\n");
		return 1;
	}

	if(olInit(FRAMES_BUF, 300000) < 0) {
		printf("OpenLase init failed\n");
		return 1;
	}

	if (aspect == 0)
		aspect = pCodecCtx->width / (float)pCodecCtx->height;

	if (framerate == 0)
		framerate = (float)pFormatCtx->streams[videoStream]->r_frame_rate.num / (float)pFormatCtx->streams[videoStream]->r_frame_rate.den;

	float iaspect = 1/aspect;

	if (aspect > 1) {
		olSetScissor(-1, -iaspect, 1, iaspect);
		olScale(1, iaspect);
	} else {
		olSetScissor(-aspect, -1, aspect, 1);
		olScale(aspect, 1);
	}

	printf("Aspect is %f %f\n", aspect, iaspect);
	printf("Overscan is %f\n", overscan);

	olScale(1+overscan, 1+overscan);
	olTranslate(-1.0f, 1.0f);
	olScale(2.0f/pCodecCtx->width, -2.0f/pCodecCtx->height);

	int maxd = pCodecCtx->width > pCodecCtx->height ? pCodecCtx->width : pCodecCtx->height;
	params.snap = (snap_pix*2.0)/(float)maxd;

	float frametime = 1.0f/framerate;
	printf("Framerate: %f (%fs per frame)\n", framerate, frametime);

	olSetAudioCallback(moreaudio);
	olSetRenderParams(&params);

	float vidtime = 0;
	int inf=0;
	int bg_white = -1;
	float time = 0;
	float ftime;
	int frames = 0;

	OLFrameInfo info;

	OLTraceCtx *trace_ctx;

	OLTraceResult result;

	memset(&result, 0, sizeof(result));

	tparams.width = pCodecCtx->width,
	tparams.height = pCodecCtx->height,
	olTraceInit(&trace_ctx, &tparams);

	while(GetNextFrame(pFormatCtx, pCodecCtx, videoStream, &frame)) {
		if (inf == 0)
			printf("Frame stride: %d\n", frame->linesize[0]);
		inf+=1;
		if (vidtime < time) {
			vidtime += frametime;
			printf("Frame skip!\n");
			continue;
		}
		vidtime += frametime;

		int thresh;
		int obj;
		int bsum = 0;
		int c;
		for (c=edge_off; c<(pCodecCtx->width-edge_off); c++) {
			bsum += frame->data[0][c+edge_off*frame->linesize[0]];
			bsum += frame->data[0][c+(pCodecCtx->height-edge_off-1)*frame->linesize[0]];
		}
		for (c=edge_off; c<(pCodecCtx->height-edge_off); c++) {
			bsum += frame->data[0][edge_off+c*frame->linesize[0]];
			bsum += frame->data[0][(c+1)*frame->linesize[0]-1-edge_off];
		}
		bsum /= (2*(pCodecCtx->width+pCodecCtx->height));
		if (bg_white == -1)
			bg_white = bsum > 128;
		if (bg_white && bsum < sw_dark)
			bg_white = 0;
		if (!bg_white && bsum > sw_light)
			bg_white = 1;

		if (bg_white)
			thresh = thresh_light;
		else
			thresh = thresh_dark;

		tparams.threshold = thresh;
		olTraceReInit(trace_ctx, &tparams);
		olTraceFree(&result);
		obj = olTrace(trace_ctx, frame->data[0], frame->linesize[0], &result);

		do {
			int i, j;
			for (i = 0; i < result.count; i++) {
				OLTraceObject *o = &result.objects[i];
				olBegin(OL_POINTS);
				OLTracePoint *p = o->points;
				for (j = 0; j < o->count; j++) {
					if (j % decimate == 0)
						olVertex(p->x, p->y, C_WHITE);
					p++;
				}
				olEnd();
			}

			ftime = olRenderFrame(200);
			olGetFrameInfo(&info);
			frames++;
			time += ftime;
			printf("Frame time: %.04f, Cur FPS:%6.02f, Avg FPS:%6.02f, Drift: %7.4f, "
				   "In %4d, Out %4d Thr %3d Bg %3d Pts %4d",
				   ftime, 1/ftime, frames/time, time-vidtime,
				   inf, frames, thresh, bsum, info.points);
			if (info.resampled_points)
				printf(" Rp %4d Bp %4d", info.resampled_points, info.resampled_blacks);
			if (info.padding_points)
				printf(" Pad %4d", info.padding_points);
			printf("\n");
		} while ((time+frametime) < vidtime);
	}

	olTraceDeinit(trace_ctx);

	for(i=0;i<FRAMES_BUF;i++)
		olRenderFrame(200);

	olShutdown();
	av_deinit();
	exit (0);
}
Beispiel #4
0
int main(int argc, char** argv) {
	int opt, i, result = 0;
	const char* path = NULL;
	const char* serial_number = NULL;
	int exit_code = EXIT_SUCCESS;
	struct timeval time_now;
	float time_diff;
	float sweep_rate;
	unsigned int lna_gain=16, vga_gain=20;
	uint32_t freq_min = 0;
	uint32_t freq_max = 6000;
	uint32_t requested_fft_bin_width;


	while( (opt = getopt(argc, argv, "a:f:p:l:g:d:n:w:1BILr:h?")) != EOF ) {
		result = HACKRF_SUCCESS;
		switch( opt ) 
		{
		case 'd':
			serial_number = optarg;
			break;

		case 'a':
			amp = true;
			result = parse_u32(optarg, &amp_enable);
			break;

		case 'f':
			result = parse_u32_range(optarg, &freq_min, &freq_max);
			if(freq_min >= freq_max) {
				fprintf(stderr,
						"argument error: freq_max must be greater than freq_min.\n");
				usage();
				return EXIT_FAILURE;
			}
			if(FREQ_MAX_MHZ <freq_max) {
				fprintf(stderr,
						"argument error: freq_max may not be higher than %u.\n",
						FREQ_MAX_MHZ);
				usage();
				return EXIT_FAILURE;
			}
			if(MAX_SWEEP_RANGES <= num_ranges) {
				fprintf(stderr,
						"argument error: specify a maximum of %u frequency ranges.\n",
						MAX_SWEEP_RANGES);
				usage();
				return EXIT_FAILURE;
			}
			frequencies[2*num_ranges] = (uint16_t)freq_min;
			frequencies[2*num_ranges+1] = (uint16_t)freq_max;
			num_ranges++;
			break;

		case 'p':
			antenna = true;
			result = parse_u32(optarg, &antenna_enable);
			break;

		case 'l':
			result = parse_u32(optarg, &lna_gain);
			break;

		case 'g':
			result = parse_u32(optarg, &vga_gain);
			break;

		case 'n':
			result = parse_u32(optarg, &num_samples);
			break;

		case 'w':
			result = parse_u32(optarg, &requested_fft_bin_width);
			fftSize = DEFAULT_SAMPLE_RATE_HZ / requested_fft_bin_width;
			break;

		case '1':
			one_shot = true;
			break;

		case 'B':
			binary_output = true;
			break;

		case 'I':
			ifft_output = true;
			break;

		case 'L':
			openlase_output = true;
			break;

		case 'r':
			path = optarg;
			break;

		case 'h':
		case '?':
			usage();
			return EXIT_SUCCESS;

		default:
			fprintf(stderr, "unknown argument '-%c %s'\n", opt, optarg);
			usage();
			return EXIT_FAILURE;
		}
		
		if( result != HACKRF_SUCCESS ) {
			fprintf(stderr, "argument error: '-%c %s' %s (%d)\n", opt, optarg, hackrf_error_name(result), result);
			usage();
			return EXIT_FAILURE;
		}		
	}

	if (lna_gain % 8)
		fprintf(stderr, "warning: lna_gain (-l) must be a multiple of 8\n");

	if (vga_gain % 2)
		fprintf(stderr, "warning: vga_gain (-g) must be a multiple of 2\n");

	if (num_samples % SAMPLES_PER_BLOCK) {
		fprintf(stderr, "warning: num_samples (-n) must be a multiple of 8192\n");
		return EXIT_FAILURE;
	}

	if (num_samples < SAMPLES_PER_BLOCK) {
		fprintf(stderr, "warning: num_samples (-n) must be at least 8192\n");
		return EXIT_FAILURE;
	}

	if( amp ) {
		if( amp_enable > 1 ) {
			fprintf(stderr, "argument error: amp_enable shall be 0 or 1.\n");
			usage();
			return EXIT_FAILURE;
		}
	}

	if (antenna) {
		if (antenna_enable > 1) {
			fprintf(stderr, "argument error: antenna_enable shall be 0 or 1.\n");
			usage();
			return EXIT_FAILURE;
		}
	}

	if (0 == num_ranges) {
		frequencies[0] = (uint16_t)freq_min;
		frequencies[1] = (uint16_t)freq_max;
		num_ranges++;
	}

	if(binary_output + ifft_output + openlase_output > 1) {
		fprintf(stderr, "argument error: binary output (-B), IFFT output (-I) and openlase output (-L) are mutually exclusive.\n");
		return EXIT_FAILURE;
	}

	if(ifft_output && (1 < num_ranges)) {
		fprintf(stderr, "argument error: only one frequency range is supported in IFFT output (-I) mode.\n");
		return EXIT_FAILURE;
	}

	if(4 > fftSize) {
		fprintf(stderr,
				"argument error: FFT bin width (-w) must be no more than one quarter the sample rate\n");
		return EXIT_FAILURE;
	}

	if(8184 < fftSize) {
		fprintf(stderr,
				"argument error: FFT bin width (-w) too small, resulted in more than 8184 FFT bins\n");
		return EXIT_FAILURE;
	}

	/* In interleaved mode, the FFT bin selection works best if the total
	 * number of FFT bins is equal to an odd multiple of four.
	 * (e.g. 4, 12, 20, 28, 36, . . .)
	 */
	while((fftSize + 4) % 8) {
		fftSize++;
	}

	fft_bin_width = (double)DEFAULT_SAMPLE_RATE_HZ / fftSize;
	fftwIn = (fftwf_complex*)fftwf_malloc(sizeof(fftwf_complex) * fftSize);
	fftwOut = (fftwf_complex*)fftwf_malloc(sizeof(fftwf_complex) * fftSize);
	fftwPlan = fftwf_plan_dft_1d(fftSize, fftwIn, fftwOut, FFTW_FORWARD, FFTW_MEASURE);
	pwr = (float*)fftwf_malloc(sizeof(float) * fftSize);
	window = (float*)fftwf_malloc(sizeof(float) * fftSize);
	for (i = 0; i < fftSize; i++) {
		window[i] = (float) (0.5f * (1.0f - cos(2 * M_PI * i / (fftSize - 1))));
	}

	result = hackrf_init();
	if( result != HACKRF_SUCCESS ) {
		fprintf(stderr, "hackrf_init() failed: %s (%d)\n", hackrf_error_name(result), result);
		usage();
		return EXIT_FAILURE;
	}
	
	result = hackrf_open_by_serial(serial_number, &device);
	if( result != HACKRF_SUCCESS ) {
		fprintf(stderr, "hackrf_open() failed: %s (%d)\n", hackrf_error_name(result), result);
		usage();
		return EXIT_FAILURE;
	}

	if((NULL == path) || (strcmp(path, "-") == 0)) {
		fd = stdout;
	} else {
		fd = fopen(path, "wb");
	}

	if(NULL == fd) {
		fprintf(stderr, "Failed to open file: %s\n", path);
		return EXIT_FAILURE;
	}
	/* Change fd buffer to have bigger one to store or read data on/to HDD */
	result = setvbuf(fd , NULL , _IOFBF , FD_BUFFER_SIZE);
	if( result != 0 ) {
		fprintf(stderr, "setvbuf() failed: %d\n", result);
		usage();
		return EXIT_FAILURE;
	}

#ifdef _MSC_VER
	SetConsoleCtrlHandler( (PHANDLER_ROUTINE) sighandler, TRUE );
#else
	signal(SIGINT, &sigint_callback_handler);
	signal(SIGILL, &sigint_callback_handler);
	signal(SIGFPE, &sigint_callback_handler);
	signal(SIGSEGV, &sigint_callback_handler);
	signal(SIGTERM, &sigint_callback_handler);
	signal(SIGABRT, &sigint_callback_handler);
#endif
	fprintf(stderr, "call hackrf_sample_rate_set(%.03f MHz)\n",
		   ((float)DEFAULT_SAMPLE_RATE_HZ/(float)FREQ_ONE_MHZ));
	result = hackrf_set_sample_rate_manual(device, DEFAULT_SAMPLE_RATE_HZ, 1);
	if( result != HACKRF_SUCCESS ) {
		fprintf(stderr, "hackrf_sample_rate_set() failed: %s (%d)\n",
			   hackrf_error_name(result), result);
		usage();
		return EXIT_FAILURE;
	}

	fprintf(stderr, "call hackrf_baseband_filter_bandwidth_set(%.03f MHz)\n",
			((float)DEFAULT_BASEBAND_FILTER_BANDWIDTH/(float)FREQ_ONE_MHZ));
	result = hackrf_set_baseband_filter_bandwidth(device, DEFAULT_BASEBAND_FILTER_BANDWIDTH);
	if( result != HACKRF_SUCCESS ) {
		fprintf(stderr, "hackrf_baseband_filter_bandwidth_set() failed: %s (%d)\n",
			   hackrf_error_name(result), result);
		usage();
		return EXIT_FAILURE;
	}

	result = hackrf_set_vga_gain(device, vga_gain);
	result |= hackrf_set_lna_gain(device, lna_gain);

	/*
	 * For each range, plan a whole number of tuning steps of a certain
	 * bandwidth. Increase high end of range if necessary to accommodate a
	 * whole number of steps, minimum 1.
	 */
	for(i = 0; i < num_ranges; i++) {
		step_count = 1 + (frequencies[2*i+1] - frequencies[2*i] - 1)
				/ TUNE_STEP;
		frequencies[2*i+1] = (uint16_t) (frequencies[2*i] + step_count * TUNE_STEP);
		fprintf(stderr, "Sweeping from %u MHz to %u MHz\n",
				frequencies[2*i], frequencies[2*i+1]);
	}

	if(ifft_output) {
		ifftwIn = (fftwf_complex*)fftwf_malloc(sizeof(fftwf_complex) * fftSize * step_count);
		ifftwOut = (fftwf_complex*)fftwf_malloc(sizeof(fftwf_complex) * fftSize * step_count);
		ifftwPlan = fftwf_plan_dft_1d(fftSize * step_count, ifftwIn, ifftwOut, FFTW_BACKWARD, FFTW_MEASURE);
	}

	if (openlase_output) {
		openlaseBuf = (float*)malloc(sizeof(float) * fftSize * step_count);
		OLRenderParams params;

		memset(&params, 0, sizeof params);
		params.rate = 48000;
		params.on_speed = 2.0/100.0;
		params.off_speed = 2.0/20.0;
		params.start_wait = 8;
		params.start_dwell = 3;
		params.curve_dwell = 0;
		params.corner_dwell = 8;
		params.curve_angle = cosf(30.0*(M_PI/180.0)); // 30 deg
		params.end_dwell = 3;
		params.end_wait = 7;
		params.snap = 1/100000.0;
		params.render_flags = RENDER_GRAYSCALE;

		if(olInit(3, 30000) < 0)
			return EXIT_FAILURE;

		olSetRenderParams(&params);

		olBegin(OL_LINESTRIP);
	}

	result |= hackrf_start_rx(device, rx_callback, NULL);
	if (result != HACKRF_SUCCESS) {
		fprintf(stderr, "hackrf_start_rx() failed: %s (%d)\n", hackrf_error_name(result), result);
		usage();
		return EXIT_FAILURE;
	}

	result = hackrf_init_sweep(device, frequencies, num_ranges, num_samples * 2,
			TUNE_STEP * FREQ_ONE_MHZ, OFFSET, INTERLEAVED);
	if( result != HACKRF_SUCCESS ) {
		fprintf(stderr, "hackrf_init_sweep() failed: %s (%d)\n",
			   hackrf_error_name(result), result);
		return EXIT_FAILURE;
	}

	if (amp) {
		fprintf(stderr, "call hackrf_set_amp_enable(%u)\n", amp_enable);
		result = hackrf_set_amp_enable(device, (uint8_t)amp_enable);
		if (result != HACKRF_SUCCESS) {
			fprintf(stderr, "hackrf_set_amp_enable() failed: %s (%d)\n",
				   hackrf_error_name(result), result);
			usage();
			return EXIT_FAILURE;
		}
	}

	if (antenna) {
		fprintf(stderr, "call hackrf_set_antenna_enable(%u)\n", antenna_enable);
		result = hackrf_set_antenna_enable(device, (uint8_t)antenna_enable);
		if (result != HACKRF_SUCCESS) {
			fprintf(stderr, "hackrf_set_antenna_enable() failed: %s (%d)\n",
				   hackrf_error_name(result), result);
			usage();
			return EXIT_FAILURE;
		}
	}

	gettimeofday(&t_start, NULL);

	fprintf(stderr, "Stop with Ctrl-C\n");
	while((hackrf_is_streaming(device) == HACKRF_TRUE) && (do_exit == false)) {
		float time_difference;
		sleep(1);
		
		gettimeofday(&time_now, NULL);
		
		time_difference = TimevalDiff(&time_now, &t_start);
		sweep_rate = (float)sweep_count / time_difference;
		fprintf(stderr, "%" PRIu64 " total sweeps completed, %.2f sweeps/second\n",
				sweep_count, sweep_rate);

		if (byte_count == 0) {
			exit_code = EXIT_FAILURE;
			fprintf(stderr, "\nCouldn't transfer any data for one second.\n");
			break;
		}
		byte_count = 0;
	}

	result = hackrf_is_streaming(device);	
	if (do_exit) {
		fprintf(stderr, "\nExiting...\n");
	} else {
		fprintf(stderr, "\nExiting... hackrf_is_streaming() result: %s (%d)\n",
			   hackrf_error_name(result), result);
	}

	gettimeofday(&time_now, NULL);
	time_diff = TimevalDiff(&time_now, &t_start);
	fprintf(stderr, "Total sweeps: %" PRIu64 " in %.5f seconds (%.2f sweeps/second)\n",
			sweep_count, time_diff, sweep_rate);

	if(device != NULL) {
		result = hackrf_stop_rx(device);
		if(result != HACKRF_SUCCESS) {
			fprintf(stderr, "hackrf_stop_rx() failed: %s (%d)\n",
				   hackrf_error_name(result), result);
		} else {
			fprintf(stderr, "hackrf_stop_rx() done\n");
		}

		result = hackrf_close(device);
		if(result != HACKRF_SUCCESS) {
			fprintf(stderr, "hackrf_close() failed: %s (%d)\n",
				   hackrf_error_name(result), result);
		} else {
			fprintf(stderr, "hackrf_close() done\n");
		}

		hackrf_exit();
		fprintf(stderr, "hackrf_exit() done\n");
	}

	if(fd != NULL) {
		fclose(fd);
		fd = NULL;
		fprintf(stderr, "fclose(fd) done\n");
	}

	if (openlase_output)
		olShutdown();

	fftwf_free(fftwIn);
	fftwf_free(fftwOut);
	fftwf_free(pwr);
	fftwf_free(window);
	fftwf_free(ifftwIn);
	fftwf_free(ifftwOut);
	fprintf(stderr, "exit\n");
	return exit_code;
}
Beispiel #5
0
int main (int argc, char *argv[])
{
	initscr();
	cbreak();
	curs_set(0);
	keypad(stdscr, TRUE);
	nodelay(stdscr, TRUE);

	int wh = (LINES - WINSTART)/2;
	
	attron(A_BOLD);
	render_win = newwin(wh-1, COLS, WINSTART + 1, 0);
	scrollok(render_win, TRUE);
	mvprintw(WINSTART, 0, "Render messages:");

	misc_win = newwin(wh-1, COLS, WINSTART + wh + 1, 0);
	scrollok(misc_win, TRUE);
	mvprintw(WINSTART + wh, 0, "Misc messages:");
	attroff(A_BOLD);

	mvprintw(0, 0, "Keys:  NEXT: -> or space  PREV: <-  QUIT: q\n");

	refresh();

	cur_win = misc_win;
	olSetLogCallback(logger);

	memset(&master_params, 0, sizeof master_params);
	master_params.rate = 48000;
	master_params.on_speed = 2.0/100.0;
	master_params.off_speed = 2.0/55.0;
	master_params.start_wait = 12;
	master_params.start_dwell = 3;
	master_params.curve_dwell = 0;
	master_params.corner_dwell = 8;
	master_params.curve_angle = cosf(30.0*(M_PI/180.0)); // 30 deg
	master_params.end_dwell = 3;
	master_params.end_wait = 7;
	master_params.snap = 1/100000.0;
	master_params.max_framelen = master_params.rate / 30;
	master_params.flatness = 0.000001;
	master_params.render_flags = RENDER_GRAYSCALE;

	if(olInit(4, 100000) < 0)
		return 1;

	atexit(reset_term);

	olSetVertexShader(shader_cube);

	olSetScissor (-1, -ASPECT, 1, ASPECT);

	//olLog("\e[6H");
	OLRenderParams params = master_params;
	if (slides[0].init)
		slides[0].init(&slides[0].context, slides[0].arg, &params);
	olSetRenderParams(&params);

	int done = 0;
	while (!done) {
		if (next_slide == -1) {
			mvprintw(1, 0, "Slide %d/%d", cur_slide+1, NUM_SLIDES);
		} else {
			mvprintw(1, 0, "Slide %d/%d -> %d/%d", cur_slide+1, NUM_SLIDES, next_slide+1, NUM_SLIDES);
		}
		clrtoeol();
		refresh();

		fd_set rfds;
		struct timeval tv;
		tv.tv_sec = tv.tv_usec = 0;
		FD_ZERO(&rfds);
		FD_SET(0, &rfds);

		while(1) {
			int ch = getch();
			if (ch == ERR)
				break;
			switch (ch) {
				case KEY_LEFT:
					go(-1);
					break;
				case KEY_RIGHT:
				case ' ':
					go(1);
					break;
				case 'q':
					done = 1;
			}
			
		}

		cur_win = render_win;
		render_slides();
		cur_win = misc_win;
	}

	olShutdown();
	exit (0);
}
Beispiel #6
0
int main (int argc, char *argv[])
{
	OLRenderParams params;

	memset(&params, 0, sizeof params);
	params.rate = 48000;
	params.on_speed = 2.0/100.0;
	params.off_speed = 2.0/20.0;
	params.start_wait = 8;
	params.start_dwell = 3;
	params.curve_dwell = 0;
	params.corner_dwell = 8;
	params.curve_angle = cosf(30.0*(M_PI/180.0)); // 30 deg
	params.end_dwell = 3;
	params.end_wait = 7;
	params.snap = 1/100000.0;
	params.render_flags = RENDER_GRAYSCALE;

	if(olInit(3, 30000) < 0)
		return 1;

	olSetRenderParams(&params);

	float time = 0;
	float ftime;
	int i,j;

	int frames = 0;

	while(1) {
		olLoadIdentity3();
		olLoadIdentity();
		olPerspective(60, 1, 1, 100);
		olTranslate3(0, 0, -3);

		for(i=0; i<2; i++) {
                  if (i == 1)
                    olColor3(0.0,1.0,0.0);
                  else
                    olColor3(0.0,1.0,0.0);

                  olScale3(0.6, 0.6, 0.6);

                  olRotate3Z(time * M_PI * 0.1);
                  olRotate3Y(time * M_PI * 0.8);
                  olRotate3X(time * M_PI * 0.73);

                  olBegin(OL_LINESTRIP);
                  olVertex3(-1, -1, -1);
                  olVertex3( 1, -1, -1);
                  olVertex3( 1,  1, -1);
                  olVertex3(-1,  1, -1);
                  olVertex3(-1, -1, -1);
                  olVertex3(-1, -1,  1);
                  olEnd();

                  olBegin(OL_LINESTRIP);
                  olVertex3( 1,  1,  1);
                  olVertex3(-1,  1,  1);
                  olVertex3(-1, -1,  1);
                  olVertex3( 1, -1,  1);
                  olVertex3( 1,  1,  1);
                  olVertex3( 1,  1, -1);
                  olEnd();

                  olBegin(OL_LINESTRIP);
                  olVertex3( 1, -1, -1);
                  olVertex3( 1, -1,  1);
                  olEnd();

                  olBegin(OL_LINESTRIP);
                  olVertex3(-1,  1,  1);
                  olVertex3(-1,  1, -1);
                  olEnd();
		}

		ftime = olRenderFrame(60);
		frames++;
		time += ftime;
		printf("Frame time: %f, FPS:%f\n", ftime, frames/time);
	}

	olShutdown();
	exit (0);
}
Beispiel #7
0
static VALUE
ol_shutdown(VALUE self)
{
  olShutdown();
  return Qnil;
}
Beispiel #8
0
int main (int argc, char *argv[])
{

	void *mod_data;
	FILE *mod_fd;
	size_t mod_size;

	mod_fd = fopen("GLOS-pope.xm","r");
	fseek(mod_fd, 0, SEEK_END);
	mod_size = ftell(mod_fd);
	fseek(mod_fd, 0, SEEK_SET);
	mod_data = malloc(mod_size);
	fread(mod_data, 1, mod_size, mod_fd);
	fclose(mod_fd);

	ModPlug_Settings cfg;
	ModPlug_GetSettings(&cfg);
	cfg.mChannels = 2;
	cfg.mBits = 16;
	cfg.mFrequency = 48000;
	cfg.mResamplingMode = MODPLUG_RESAMPLE_SPLINE;
	cfg.mFlags = MODPLUG_ENABLE_OVERSAMPLING;
	ModPlug_SetSettings(&cfg);

	module = ModPlug_Load(mod_data, mod_size);

	srandom(0);

	memset(&params, 0, sizeof params);
	params.rate = 48000;
	params.on_speed = 2.0/100.0;
	params.off_speed = 2.0/30.0;
	params.start_wait = 8;
	params.start_dwell = 2;
	params.curve_dwell = 0;
	params.corner_dwell = 2;
	params.curve_angle = cosf(30.0*(M_PI/180.0)); // 30 deg
	params.end_dwell = 2;
	params.end_wait = 1;
	params.snap = 1/100000.0;
	params.flatness = 0.000005;
	params.max_framelen = params.rate / 24;
	params.render_flags = RENDER_GRAYSCALE;

	if(olInit(10, 30000) < 0)
		return 1;
	olSetRenderParams(&params);

	olSetAudioCallback(gen_audio);

	float time = 0;
	float ftime;
	int i,j;

	int frames = 0;

	memset(mbuf, 0, sizeof mbuf);

	font = olGetDefaultFont();

	float xpos = 1.0;

	DoStars(96);
	DoTitle(111);

	DoMetaballs(143);
	DoFire(174);

	DoTunnel(175+32);
	DoCubes(175+32+64);


	DoEuskal();

#if 0

	while(1) {
		int obj;
		float w;

		points_left = cur_draw;
		olPushColor();
		//olMultColor(C_GREY((int)(255.0f * cur_draw / count)));
		olSetVertexShader(cutoff);
		olDrawIlda(ild);
		olSetVertexShader(NULL);
		olPopColor();
/*
		olSetVertexShader(sinescroller);

		w = olDrawString(font, xpos, 0.35, 0.4, C_WHITE, "Hello, World! This is a test message displayed using the OpenLase text functions. Sine scrollers FTW!");
		if (xpos < (-w-1.5))
			xpos = 1.0;

		olSetVertexShader(NULL);*/

/*
		olDrawString(font, -1, 0.35, 0.4, C_WHITE, "Hello, World!");
		olDrawString(font, -1, -0, 0.4, C_WHITE, "How are you?");
		olDrawString(font, -1, -0.35, 0.4, C_WHITE, "    (-;   :-)");*/

		//render_cubes(time);
		//render_metaballs(time);
		//ender_fire();
		/*
		olBegin(OL_BEZIERSTRIP);
		olVertex(0,1,C_WHITE);
		olVertex(1,1,C_WHITE);
		olVertex(1,1,C_WHITE);
		olVertex(1,0,C_WHITE);

		olVertex(1,-1,C_WHITE);
		olVertex(1,-1,C_WHITE);
		olVertex(0,-1,C_WHITE);
		olEnd();*/

		ftime = olRenderFrame(150);
		frames++;
		gbl_time += ftime;
		xpos -= ftime;
		cur_draw += ftime * count / 5.0;
		if (cur_draw > count)
			cur_draw = count;
		printf("Frame time: %f, FPS:%f\n", ftime, frames/time);
	}

#endif

	olShutdown();
	exit (0);
}
Beispiel #9
0
int main (int argc, char *argv[])
{

	snd_seq_t *seq_handle;
	int npfd;
	struct pollfd *pfd;

	seq_handle = open_seq();
	npfd = snd_seq_poll_descriptors_count(seq_handle, POLLIN);
	pfd = malloc(npfd * sizeof(*pfd));
	snd_seq_poll_descriptors(seq_handle, pfd, npfd, POLLIN);

	if (argc >= 2) {
		snd_seq_addr_t addr;
		if (snd_seq_parse_address(seq_handle, &addr, argv[1]) == 0) {
			if (snd_seq_connect_from(seq_handle, portid, addr.client, addr.port) == 0) {
				printf("Connected to %s\n", argv[1]);
			}
		}
	}

	int i;
	for (i=2; i<argc; i++)
		channels |= 1<<(atoi(argv[i])-1);

	OLRenderParams params;

	memset(&params, 0, sizeof params);
	params.rate = 48000;
	params.on_speed = 2.0/50.0;
	params.off_speed = 2.0/35.0;
	params.start_wait = 6;
	params.start_dwell = 1;
	params.curve_dwell = 0;
	params.corner_dwell = 0;
	params.curve_angle = cosf(30.0*(M_PI/180.0)); // 30 deg
	params.end_dwell = 0;
	params.end_wait = 7;
	params.flatness = 0.00001;
	params.snap = 1/100000.0;
	params.render_flags = RENDER_GRAYSCALE;

	if(olInit(3, 30000) < 0)
		return 1;

	olSetRenderParams(&params);

	float time = 0;
	float ftime;

	int frames = 0;

	float nps = 0;
	avgnotes = 5;
	
	while(1) {
		olLoadIdentity();

		int drawn = draw();
		if (drawn < 2)
			draw();

		ftime = olRenderFrame(100);

		float t = powf(0.3, ftime);
		avgnotes = avgnotes * t + (nps+2) * (1.0f-t);

		animate(ftime);

		int notes = 0;
		if (poll(pfd, npfd, 0) > 0)
			notes = midi_action(seq_handle);

		int pnotes = (notes+2)/3;

		nps = pnotes / ftime * 1.2;

		frames++;
		time += ftime;
		printf("Frame time: %f, Avg FPS:%f, Cur FPS:%f, %d, nps:%3d, avgnotes:%f\n", ftime, frames/time, 1/ftime, notes, (int)nps, avgnotes);
	}

	olShutdown();
	exit (0);
}
Beispiel #10
0
void *display_thread(void *arg)
{
	PlayerCtx *ctx = arg;
	int i;

	OLRenderParams params;
	memset(&params, 0, sizeof params);
	params.rate = 48000;
	params.on_speed = 2.0/100.0;
	params.off_speed = 2.0/15.0;
	params.start_wait = 8;
	params.end_wait = 3;
	params.snap = 1/120.0;
	params.render_flags = RENDER_GRAYSCALE;
	params.min_length = 20;
	params.start_dwell = 2;
	params.end_dwell = 2;
	params.max_framelen = 48000/20.0;

	if(olInit(OL_FRAMES_BUF, 300000) < 0) {
		printf("OpenLase init failed\n");
		return NULL;
	}

	float aspect = ctx->width / (float)ctx->height;
	float sample_aspect = av_q2d(ctx->v_stream->sample_aspect_ratio);
	if (sample_aspect != 0)
		aspect *= sample_aspect;
	printf("Aspect: %f\n", aspect);

	float iaspect = 1/aspect;

	int maxd = ctx->width > ctx->height ? ctx->width : ctx->height;
	int mind = ctx->width < ctx->height ? ctx->width : ctx->height;

	g_ctx = ctx;
	olSetAudioCallback(get_audio);
	olSetRenderParams(&params);

	OLTraceCtx *trace_ctx;
	OLTraceParams tparams;
	OLTraceResult result;
	memset(&result, 0, sizeof(result));
	ctx->settings_changed = 1;

	tparams.sigma = ctx->settings.blur / 100.0;
	if (ctx->settings.canny)
		tparams.mode = OL_TRACE_CANNY;
	else
		tparams.mode = OL_TRACE_THRESHOLD;
	tparams.width = ctx->width;
	tparams.height = ctx->height;

	printf("Resolution: %dx%d\n", ctx->width, ctx->height);
	olTraceInit(&trace_ctx, &tparams);

	VideoFrame *last = NULL;

	pthread_mutex_lock(&ctx->display_mode_mutex);
	DisplayMode display_mode = ctx->display_mode;
	pthread_mutex_unlock(&ctx->display_mode_mutex);

	int inf = 0;
	int bg_white = -1;
	float time = 0;
	int frames = 0;
	while (display_mode != STOP) {
		pthread_mutex_lock(&ctx->settings_mutex);
		PlayerSettings settings = ctx->settings;
		int settings_changed = ctx->settings_changed;
		ctx->settings_changed = 0;
		pthread_mutex_unlock(&ctx->settings_mutex);

		if (ctx->audio_idx == -1) {
			drop_all_video(ctx);
			next_video_frame(ctx);
		}

		params.min_length = settings.minsize;
		params.end_dwell = params.start_dwell = settings.dwell;
		params.off_speed = settings.offspeed * 0.002;
		params.snap = (settings.snap*2.0)/(float)maxd;
		params.start_wait = settings.startwait;
		params.end_wait = settings.endwait;
		if (settings.minrate == 0)
			params.max_framelen = 0;
		else
			params.max_framelen = params.rate / settings.minrate;

		olSetRenderParams(&params);

		olLoadIdentity();
		if (aspect > 1) {
			olSetScissor(-1, -iaspect, 1, iaspect);
			olScale(1, iaspect);
		} else {
			olSetScissor(-aspect, -1, aspect, 1);
			olScale(aspect, 1);
		}

		olScale(1 + settings.overscan/100.0, 1 + settings.overscan/100.0);
		olTranslate(-1.0f, 1.0f);
		olScale(2.0f/ctx->width, -2.0f/ctx->height);

		if (!ctx->cur_frame || ctx->cur_frame->seekid < 0) {
			printf("Dummy frame\n");
			float ftime = olRenderFrame(80);
			pthread_mutex_lock(&ctx->display_mode_mutex);
			display_mode = ctx->display_mode;
			pthread_mutex_unlock(&ctx->display_mode_mutex);
			if (ctx->cur_frame && ctx->cur_frame->seekid < 0)
				deliver_event(ctx, time, ftime, frames, 1);
			else
				deliver_event(ctx, time, ftime, frames, 0);
			continue;
		}

		if (last != ctx->cur_frame || settings_changed) {
			tparams.sigma = settings.blur / 100.0;
			if (settings.canny) {
				tparams.mode = OL_TRACE_CANNY;
				tparams.threshold = settings.threshold;
				tparams.threshold2 = settings.threshold2;
				bg_white = -1;
			} else {
				tparams.mode = OL_TRACE_THRESHOLD;
				if (settings.splitthreshold) {
					int edge_off = mind * settings.offset / 100;
					int bsum = 0;
					int cnt = 0;
					int c;
					for (c = edge_off; c < (ctx->width-edge_off); c++) {
						bsum += ctx->cur_frame->data[c+edge_off*ctx->cur_frame->stride];
						bsum += ctx->cur_frame->data[c+(ctx->height-edge_off-1)*ctx->cur_frame->stride];
						cnt += 2;
					}
					for (c = edge_off; c < (ctx->height-edge_off); c++) {
						bsum += ctx->cur_frame->data[edge_off+ctx->cur_frame->stride];
						bsum += ctx->cur_frame->data[(c+1)*ctx->cur_frame->stride-1-edge_off];
						cnt += 2;
					}
					bsum /= cnt;
					if (bg_white == -1)
						bg_white = bsum > ((settings.darkval + settings.lightval)/2);
					if (bg_white && bsum < settings.darkval)
						bg_white = 0;
					if (!bg_white && bsum > settings.lightval)
						bg_white = 1;
					if (bg_white)
						tparams.threshold = settings.threshold2;
					else
						tparams.threshold = settings.threshold;
				} else {
					tparams.threshold = settings.threshold;
				}
			}
			olTraceReInit(trace_ctx, &tparams);
			olTraceFree(&result);
			printf("Trace\n");
			olTrace(trace_ctx, ctx->cur_frame->data, ctx->cur_frame->stride, &result);
			printf("Trace done\n");
			inf++;
			last = ctx->cur_frame;
		}

		int i, j;
		for (i = 0; i < result.count; i++) {
			OLTraceObject *o = &result.objects[i];
			olBegin(OL_POINTS);
			OLTracePoint *p = o->points;
			for (j = 0; j < o->count; j++) {
				if (j % settings.decimation == 0)
					olVertex(p->x, p->y, C_WHITE);
				p++;
			}
			olEnd();
		}

		float ftime = olRenderFrame(80);
		OLFrameInfo info;
		olGetFrameInfo(&info);
		frames++;
		time += ftime;
		printf("Frame time: %.04f, Cur FPS:%6.02f, Avg FPS:%6.02f, Drift: %7.4f, "
				"In %4d, Out %4d Thr %3d/%3d Bg %3d Pts %4d",
				ftime, 1/ftime, frames/time, 0.0, inf, frames,
				tparams.threshold, tparams.threshold2, 0, info.points);
		if (info.resampled_points)
			printf(" Rp %4d Bp %4d", info.resampled_points, info.resampled_blacks);
		if (info.padding_points)
			printf(" Pad %4d", info.padding_points);
		printf("\n");
		deliver_event(ctx, time, ftime, frames, 0);

		pthread_mutex_lock(&ctx->display_mode_mutex);
		display_mode = ctx->display_mode;
		pthread_mutex_unlock(&ctx->display_mode_mutex);
	}

	olTraceDeinit(trace_ctx);

	for(i = 0; i < OL_FRAMES_BUF; i++)
		olRenderFrame(80);

	olShutdown();
	return NULL;
}