Beispiel #1
0
static int omap_pcm_prepare(struct snd_pcm_substream *substream)
{
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct omap_runtime_data *prtd = runtime->private_data;
	struct omap_pcm_dma_data *dma_data = prtd->dma_data;
	struct omap_dma_channel_params dma_params;
	int bytes;

	/* return if this is a bufferless transfer e.g.
	 * codec <--> BT codec or GSM modem -- lg FIXME */
	if (!prtd->dma_data)
		return 0;

	memset(&dma_params, 0, sizeof(dma_params));
	dma_params.data_type			= dma_data->data_type;
	dma_params.trigger			= dma_data->dma_req;
	dma_params.sync_mode			= dma_data->sync_mode;
	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
		dma_params.src_amode		= OMAP_DMA_AMODE_POST_INC;
		dma_params.dst_amode		= OMAP_DMA_AMODE_CONSTANT;
		dma_params.src_or_dst_synch	= OMAP_DMA_DST_SYNC;
		dma_params.src_start		= runtime->dma_addr;
		dma_params.dst_start		= dma_data->port_addr;
		dma_params.dst_port		= OMAP_DMA_PORT_MPUI;
		dma_params.dst_fi		= dma_data->packet_size;
	} else {
		dma_params.src_amode		= OMAP_DMA_AMODE_CONSTANT;
		dma_params.dst_amode		= OMAP_DMA_AMODE_POST_INC;
		dma_params.src_or_dst_synch	= OMAP_DMA_SRC_SYNC;
		dma_params.src_start		= dma_data->port_addr;
		dma_params.dst_start		= runtime->dma_addr;
		dma_params.src_port		= OMAP_DMA_PORT_MPUI;
		dma_params.src_fi		= dma_data->packet_size;
	}
	/*
	 * Set DMA transfer frame size equal to ALSA period size and frame
	 * count as no. of ALSA periods. Then with DMA frame interrupt enabled,
	 * we can transfer the whole ALSA buffer with single DMA transfer but
	 * still can get an interrupt at each period bounary
	 */
	bytes = snd_pcm_lib_period_bytes(substream);
	dma_params.elem_count	= bytes >> dma_data->data_type;
	dma_params.frame_count	= runtime->periods;
	omap_set_dma_params(prtd->dma_ch, &dma_params);

	if ((cpu_is_omap1510()))
		omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
			      OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
	else
		omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);

	if (!(cpu_class_is_omap1())) {
		omap_set_dma_src_burst_mode(prtd->dma_ch,
						OMAP_DMA_DATA_BURST_16);
		omap_set_dma_dest_burst_mode(prtd->dma_ch,
						OMAP_DMA_DATA_BURST_16);
	}

	return 0;
}
Beispiel #2
0
static int omap_pcm_prepare(struct snd_pcm_substream *substream)
{
	struct snd_pcm_runtime *runtime = substream->runtime;
	struct omap_runtime_data *prtd = runtime->private_data;
	struct omap_pcm_dma_data *dma_data = prtd->dma_data;
	struct omap_dma_channel_params dma_params;
	int sync_mode;

	memset(&dma_params, 0, sizeof(dma_params));

	/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
	if (cpu_is_omap34xx() &&
			(prtd->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD))
		sync_mode = OMAP_DMA_SYNC_FRAME;
	else
		sync_mode = OMAP_DMA_SYNC_ELEMENT;

	/*
	 * Note: Regardless of interface data formats supported by OMAP McBSP
	 * or EAC blocks, internal representation is always fixed 16-bit/sample
	 */
	dma_params.data_type			= OMAP_DMA_DATA_TYPE_S16;
	dma_params.trigger			= dma_data->dma_req;
	dma_params.sync_mode			= sync_mode;
	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
		dma_params.src_amode		= OMAP_DMA_AMODE_POST_INC;
		dma_params.dst_amode		= OMAP_DMA_AMODE_CONSTANT;
		dma_params.src_or_dst_synch	= OMAP_DMA_DST_SYNC;
		dma_params.src_start		= runtime->dma_addr;
		dma_params.dst_start		= dma_data->port_addr;
		dma_params.dst_port		= OMAP_DMA_PORT_MPUI;
	} else {
		dma_params.src_amode		= OMAP_DMA_AMODE_CONSTANT;
		dma_params.dst_amode		= OMAP_DMA_AMODE_POST_INC;
		dma_params.src_or_dst_synch	= OMAP_DMA_SRC_SYNC;
		dma_params.src_start		= dma_data->port_addr;
		dma_params.dst_start		= runtime->dma_addr;
		dma_params.src_port		= OMAP_DMA_PORT_MPUI;
	}
	/*
	 * Set DMA transfer frame size equal to ALSA period size and frame
	 * count as no. of ALSA periods. Then with DMA frame interrupt enabled,
	 * we can transfer the whole ALSA buffer with single DMA transfer but
	 * still can get an interrupt at each period bounary
	 */
	dma_params.elem_count	= snd_pcm_lib_period_bytes(substream) / 2;
	dma_params.frame_count	= runtime->periods;
	omap_set_dma_params(prtd->dma_ch, &dma_params);

	omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);

	omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
	omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);

	return 0;
}
static int abe_dbg_start_dma(struct omap_abe *abe, int circular)
{
    struct omap_dma_channel_params dma_params;
    int err;

    /* start the DMA in either :-
     *
     * 1) circular buffer mode where the DMA will restart when it get to
     *    the end of the buffer.
     * 2) default mode, where DMA stops at the end of the buffer.
     */

    abe->debugfs.dma_req = OMAP44XX_DMA_ABE_REQ_7;
    err = omap_request_dma(abe->debugfs.dma_req, "ABE debug",
                           abe_dbg_dma_irq, abe, &abe->debugfs.dma_ch);
    if (abe->debugfs.circular) {
        /*
         * Link channel with itself so DMA doesn't need any
         * reprogramming while looping the buffer
         */
        omap_dma_link_lch(abe->debugfs.dma_ch, abe->debugfs.dma_ch);
    }

    memset(&dma_params, 0, sizeof(dma_params));
    dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
    dma_params.trigger = abe->debugfs.dma_req;
    dma_params.sync_mode = OMAP_DMA_SYNC_FRAME;
    dma_params.src_amode = OMAP_DMA_AMODE_DOUBLE_IDX;
    dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC;
    dma_params.src_or_dst_synch = OMAP_DMA_SRC_SYNC;
    dma_params.src_start = OMAP_ABE_D_DEBUG_FIFO_ADDR + ABE_DEFAULT_BASE_ADDRESS_L3 + ABE_DMEM_BASE_OFFSET_MPU;
    dma_params.dst_start = abe->debugfs.buffer_addr;
    dma_params.src_port = OMAP_DMA_PORT_MPUI;
    dma_params.src_ei = 1;
    dma_params.src_fi = 1 - abe->debugfs.elem_bytes;

    /* 128 bytes shifted into words */
    dma_params.elem_count = abe->debugfs.elem_bytes >> 2;
    dma_params.frame_count =
        abe->debugfs.buffer_bytes / abe->debugfs.elem_bytes;
    omap_set_dma_params(abe->debugfs.dma_ch, &dma_params);

    omap_enable_dma_irq(abe->debugfs.dma_ch, OMAP_DMA_FRAME_IRQ);
    omap_set_dma_src_burst_mode(abe->debugfs.dma_ch, OMAP_DMA_DATA_BURST_16);
    omap_set_dma_dest_burst_mode(abe->debugfs.dma_ch, OMAP_DMA_DATA_BURST_16);

    abe->debugfs.reader_offset = 0;

    pm_runtime_get_sync(abe->dev);
    omap_start_dma(abe->debugfs.dma_ch);
    return 0;
}
Beispiel #4
0
static void omap1610_irda_start_rx_dma(struct omap1610_irda *si)
{
	/* Configure DMA */
	omap_set_dma_src_params(si->rx_dma_channel, 0x3, 0x0, (unsigned long)UART3_RHR);

	omap_enable_dma_irq(si->rx_dma_channel, 0x01);

	omap_set_dma_dest_params(si->rx_dma_channel, 0x0, 0x1,
				 si->rx_buf_dma_phys);

	omap_set_dma_transfer_params(si->rx_dma_channel, 0x0, 4096, 0x1, 0x0);

	omap_start_dma(si->rx_dma_channel);
}
Beispiel #5
0
static void omap_start_tx_dma(struct omap_irda *omap_ir, int size)
{
	/* Configure DMA */
	omap_set_dma_dest_params(omap_ir->tx_dma_channel, 0x03, 0x0,
				omap_ir->pdata->dest_start, 0, 0);

	omap_enable_dma_irq(omap_ir->tx_dma_channel, 0x01);

	omap_set_dma_src_params(omap_ir->tx_dma_channel, 0x0, 0x1,
				omap_ir->tx_buf_dma_phys,
				0, 0);

	omap_set_dma_transfer_params(omap_ir->tx_dma_channel, 0x0, size, 0x1,
				0x0, omap_ir->pdata->tx_trigger, 0);

	/* Start DMA */
	omap_start_dma(omap_ir->tx_dma_channel);
}
Beispiel #6
0
static void omap_irda_start_rx_dma(struct omap_irda *omap_ir)
{
	/* Configure DMA */
	omap_set_dma_src_params(omap_ir->rx_dma_channel, 0x3, 0x0,
				omap_ir->pdata->src_start,
				0, 0);

	omap_enable_dma_irq(omap_ir->rx_dma_channel, 0x01);

	omap_set_dma_dest_params(omap_ir->rx_dma_channel, 0x0, 0x1,
				omap_ir->rx_buf_dma_phys,
				0, 0);

	omap_set_dma_transfer_params(omap_ir->rx_dma_channel, 0x0,
				IRDA_SKB_MAX_MTU, 0x1,
				0x0, omap_ir->pdata->rx_trigger, 0);

	omap_start_dma(omap_ir->rx_dma_channel);
}
int omap3isp_hist_init(struct isp_device *isp)
{
    struct ispstat *hist = &isp->isp_hist;
    struct omap3isp_hist_config *hist_cfg;
    int ret = -1;

    hist_cfg = kzalloc(sizeof(*hist_cfg), GFP_KERNEL);
    if (hist_cfg == NULL)
        return -ENOMEM;

    memset(hist, 0, sizeof(*hist));
    if (HIST_CONFIG_DMA)
        ret = omap_request_dma(OMAP24XX_DMA_NO_DEVICE, "DMA_ISP_HIST",
                               hist_dma_cb, hist, &hist->dma_ch);
    if (ret) {
        if (HIST_CONFIG_DMA)
            dev_warn(isp->dev, "hist: DMA request channel failed. "
                     "Using PIO only.\n");
        hist->dma_ch = -1;
    } else {
        dev_dbg(isp->dev, "hist: DMA channel = %d\n", hist->dma_ch);
        hist_dma_config(hist);
        omap_enable_dma_irq(hist->dma_ch, OMAP_DMA_BLOCK_IRQ);
    }

    hist->ops = &hist_ops;
    hist->priv = hist_cfg;
    hist->event_type = V4L2_EVENT_OMAP3ISP_HIST;
    hist->isp = isp;

    ret = omap3isp_stat_init(hist, "histogram", &hist_subdev_ops);
    if (ret) {
        kfree(hist_cfg);
        if (HIST_USING_DMA(hist))
            omap_free_dma(hist->dma_ch);
    }

    return ret;
}
Beispiel #8
0
static void omap1610_start_tx_dma(struct omap1610_irda *si, int size)
{
	__ECHO_IN;

	/* Configure DMA */
	omap_set_dma_dest_params(si->tx_dma_channel, 0x03, 0x0, (unsigned long)UART3_THR);

	omap_enable_dma_irq(si->tx_dma_channel, 0x01);

	omap_set_dma_src_params(si->tx_dma_channel, 0x0, 0x1,
				si->tx_buf_dma_phys);

	omap_set_dma_transfer_params(si->tx_dma_channel, 0x0, size, 0x1, 0x0);

	HDBG1(1);

	/* Start DMA */
	omap_start_dma(si->tx_dma_channel);

	HDBG1(1);

	__ECHO_OUT;
}
Beispiel #9
0
static int aes_dma_start(struct aes_hwa_ctx *ctx)
{
	int err, fast = 0, in, out;
	size_t count;
	dma_addr_t addr_in, addr_out;
	struct omap_dma_channel_params dma_params;
	struct tf_crypto_aes_operation_state *state =
		crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(ctx->req));
	static size_t last_count;
	unsigned long flags;

	in = IS_ALIGNED((u32)ctx->in_sg->offset, sizeof(u32));
	out = IS_ALIGNED((u32)ctx->out_sg->offset, sizeof(u32));

	fast = in && out;

	if (fast) {
		count = min(ctx->total, sg_dma_len(ctx->in_sg));
		count = min(count, sg_dma_len(ctx->out_sg));

		if (count != ctx->total)
			return -EINVAL;

		/* Only call dma_map_sg if it has not yet been done */
		if (!(ctx->req->base.flags & CRYPTO_TFM_REQ_DMA_VISIBLE)) {
			err = dma_map_sg(NULL, ctx->in_sg, 1, DMA_TO_DEVICE);
			if (!err)
				return -EINVAL;

			err = dma_map_sg(NULL, ctx->out_sg, 1, DMA_FROM_DEVICE);
			if (!err) {
				dma_unmap_sg(
					NULL, ctx->in_sg, 1, DMA_TO_DEVICE);
				return -EINVAL;
			}
		}
		ctx->req->base.flags &= ~CRYPTO_TFM_REQ_DMA_VISIBLE;

		addr_in = sg_dma_address(ctx->in_sg);
		addr_out = sg_dma_address(ctx->out_sg);

		ctx->flags |= FLAGS_FAST;
	} else {
		count = sg_copy(&ctx->in_sg, &ctx->in_offset, ctx->buf_in,
			ctx->buflen, ctx->total, 0);
		addr_in = ctx->dma_addr_in;
		addr_out = ctx->dma_addr_out;

		ctx->flags &= ~FLAGS_FAST;
	}

	ctx->total -= count;

	/* Configure HWA */
	tf_crypto_enable_clock(PUBLIC_CRYPTO_AES1_CLOCK_REG);

	tf_aes_restore_registers(state, ctx->flags & FLAGS_ENCRYPT ? 1 : 0);

	OUTREG32(&paes_reg->AES_SYSCONFIG, INREG32(&paes_reg->AES_SYSCONFIG)
		| AES_SYSCONFIG_DMA_REQ_OUT_EN_BIT
		| AES_SYSCONFIG_DMA_REQ_IN_EN_BIT);

	ctx->dma_size = count;
	if (!fast)
		dma_sync_single_for_device(NULL, addr_in, count,
			DMA_TO_DEVICE);

	dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
	dma_params.frame_count = count / AES_BLOCK_SIZE;
	dma_params.elem_count = DMA_CEN_Elts_per_Frame_AES;
	dma_params.src_ei = 0;
	dma_params.src_fi = 0;
	dma_params.dst_ei = 0;
	dma_params.dst_fi = 0;
	dma_params.sync_mode = OMAP_DMA_SYNC_FRAME;
	dma_params.read_prio = 0;
	dma_params.write_prio = 0;

	/* IN */
	dma_params.trigger = ctx->dma_in;
	dma_params.src_or_dst_synch = OMAP_DMA_DST_SYNC;
	dma_params.dst_start = AES1_REGS_HW_ADDR + 0x60;
	dma_params.dst_amode = OMAP_DMA_AMODE_CONSTANT;
	dma_params.src_start = addr_in;
	dma_params.src_amode = OMAP_DMA_AMODE_POST_INC;

	if (reconfigure_dma) {
		omap_set_dma_params(ctx->dma_lch_in, &dma_params);
		omap_set_dma_dest_burst_mode(ctx->dma_lch_in,
			OMAP_DMA_DATA_BURST_8);
		omap_set_dma_src_burst_mode(ctx->dma_lch_in,
			OMAP_DMA_DATA_BURST_8);
		omap_set_dma_src_data_pack(ctx->dma_lch_in, 1);
	} else {
		if (last_count != count)
			omap_set_dma_transfer_params(ctx->dma_lch_in,
				dma_params.data_type,
				dma_params.elem_count, dma_params.frame_count,
				dma_params.sync_mode, dma_params.trigger,
				dma_params.src_or_dst_synch);

		/* Configure input start address */
		__raw_writel(dma_params.src_start,
			omap_dma_base + (0x60 * (ctx->dma_lch_in) + 0x9c));
	}

	/* OUT */
	dma_params.trigger = ctx->dma_out;
	dma_params.src_or_dst_synch = OMAP_DMA_SRC_SYNC;
	dma_params.src_start = AES1_REGS_HW_ADDR + 0x60;
	dma_params.src_amode = OMAP_DMA_AMODE_CONSTANT;
	dma_params.dst_start = addr_out;
	dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC;

	if (reconfigure_dma) {
		omap_set_dma_params(ctx->dma_lch_out, &dma_params);
		omap_set_dma_dest_burst_mode(ctx->dma_lch_out,
			OMAP_DMA_DATA_BURST_8);
		omap_set_dma_src_burst_mode(ctx->dma_lch_out,
			OMAP_DMA_DATA_BURST_8);
		omap_set_dma_dest_data_pack(ctx->dma_lch_out, 1);
		reconfigure_dma = false;
	} else {
		if (last_count != count) {
			omap_set_dma_transfer_params(ctx->dma_lch_out,
				dma_params.data_type,
				dma_params.elem_count, dma_params.frame_count,
				dma_params.sync_mode, dma_params.trigger,
				dma_params.src_or_dst_synch);
			last_count = count;
		}
		/* Configure output start address */
		__raw_writel(dma_params.dst_start,
			omap_dma_base + (0x60 * (ctx->dma_lch_out) + 0xa0));
	}

	/* Is this really needed? */
	omap_enable_dma_irq(ctx->dma_lch_in, OMAP_DMA_BLOCK_IRQ);
	omap_enable_dma_irq(ctx->dma_lch_out, OMAP_DMA_BLOCK_IRQ);

	wmb();

	omap_start_dma(ctx->dma_lch_in);
	omap_start_dma(ctx->dma_lch_out);

	spin_lock_irqsave(&ctx->lock, flags);
	if (ctx->next_req) {
		struct ablkcipher_request *req =
			ablkcipher_request_cast(ctx->next_req);

		if (!(ctx->next_req->flags & CRYPTO_TFM_REQ_DMA_VISIBLE)) {
			err = dma_map_sg(NULL, req->src, 1, DMA_TO_DEVICE);
			if (!err) {
				/* Silently fail for now... */
				spin_unlock_irqrestore(&ctx->lock, flags);
				return 0;
			}

			err = dma_map_sg(NULL, req->dst, 1, DMA_FROM_DEVICE);
			if (!err) {
				dma_unmap_sg(NULL, req->src, 1, DMA_TO_DEVICE);
				/* Silently fail for now... */
				spin_unlock_irqrestore(&ctx->lock, flags);
				return 0;
			}

			ctx->next_req->flags |= CRYPTO_TFM_REQ_DMA_VISIBLE;
			ctx->next_req = NULL;
		}
	}

	if (ctx->backlog) {
		ctx->backlog->complete(ctx->backlog, -EINPROGRESS);
		ctx->backlog = NULL;
	}
	spin_unlock_irqrestore(&ctx->lock, flags);

	return 0;
}