Beispiel #1
0
int orte_daemon(int argc, char *argv[])
{
    int ret = 0;
    opal_cmd_line_t *cmd_line = NULL;
    char *rml_uri;
    int i;
    opal_buffer_t *buffer;
    char hostname[100];
    char *tmp_env_var = NULL;
    
    /* initialize the globals */
    memset(&orted_globals, 0, sizeof(orted_globals));
    /* initialize the singleton died pipe to an illegal value so we can detect it was set */
    orted_globals.singleton_died_pipe = -1;
    /* init the failure orted vpid to an invalid value */
    orted_globals.fail = ORTE_VPID_INVALID;
    
    /* setup to check common command line options that just report and die */
    cmd_line = OBJ_NEW(opal_cmd_line_t);
    if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
        OBJ_RELEASE(cmd_line);
        exit(1);
    }
    mca_base_cmd_line_setup(cmd_line);
    if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false,
                                                   argc, argv))) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
        free(args);
        OBJ_RELEASE(cmd_line);
        return ret;
    }
    
    /*
     * Since this process can now handle MCA/GMCA parameters, make sure to
     * process them.
     */
    mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
    
    /* Ensure that enough of OPAL is setup for us to be able to run */
    /*
     * NOTE: (JJH)
     *  We need to allow 'mca_base_cmd_line_process_args()' to process command
     *  line arguments *before* calling opal_init_util() since the command
     *  line could contain MCA parameters that affect the way opal_init_util()
     *  functions. AMCA parameters are one such option normally received on the
     *  command line that affect the way opal_init_util() behaves.
     *  It is "safe" to call mca_base_cmd_line_process_args() before 
     *  opal_init_util() since mca_base_cmd_line_process_args() does *not*
     *  depend upon opal_init_util() functionality.
     */
    if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
        fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
        exit(1);
    }

    /* save the environment for launch purposes. This MUST be
     * done so that we can pass it to any local procs we
     * spawn - otherwise, those local procs won't see any
     * non-MCA envars that were set in the enviro when the
     * orted was executed - e.g., by .csh
     */
    orte_launch_environ = opal_argv_copy(environ);
    
    /* purge any ess flag set in the environ when we were launched */
    opal_unsetenv("OMPI_MCA_ess", &orte_launch_environ);
    
    /* if orte_daemon_debug is set, let someone know we are alive right
     * away just in case we have a problem along the way
     */
    if (orted_globals.debug) {
        gethostname(hostname, 100);
        fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
    }
    
    /* check for help request */
    if (orted_globals.help) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        orte_show_help("help-orted.txt", "orted:usage", false,
                       argv[0], args);
        free(args);
        return 1;
    }
#if defined(HAVE_SETSID) && !defined(__WINDOWS__)
    /* see if we were directed to separate from current session */
    if (orted_globals.set_sid) {
        setsid();
    }
#endif  /* !defined(__WINDOWS__) */
    /* see if they want us to spin until they can connect a debugger to us */
    i=0;
    while (orted_spin_flag) {
        i++;
        if (1000 < i) i=0;        
    }

#if OPAL_ENABLE_FT_CR == 1
    /* Mark as a tool program */
    tmp_env_var = mca_base_param_env_var("opal_cr_is_tool");
    opal_setenv(tmp_env_var,
                "1",
                true, &environ);
    free(tmp_env_var);
#endif
    tmp_env_var = NULL; /* Silence compiler warning */

    /* if mapreduce set, flag it */
    if (orted_globals.mapreduce) {
        orte_map_reduce = true;
    }

    /* Set the flag telling OpenRTE that I am NOT a
     * singleton, but am "infrastructure" - prevents setting
     * up incorrect infrastructure that only a singleton would
     * require.
     */
    if (orted_globals.hnp) {
        if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
    } else {
        if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
    }
    /* finalize the OPAL utils. As they are opened again from orte_init->opal_init
     * we continue to have a reference count on them. So we have to finalize them twice...
     */
    opal_finalize_util();

    if ((int)ORTE_VPID_INVALID != orted_globals.fail) {
        orted_globals.abort=false;
        /* some vpid was ordered to fail. The value can be positive
         * or negative, depending upon the desired method for failure,
         * so need to check both here
         */
        if (0 > orted_globals.fail) {
            orted_globals.fail = -1*orted_globals.fail;
            orted_globals.abort = true;
        }
        /* are we the specified vpid? */
        if ((int)ORTE_PROC_MY_NAME->vpid == orted_globals.fail) {
            /* if the user specified we delay, then setup a timer
             * and have it kill us
             */
            if (0 < orted_globals.fail_delay) {
                ORTE_TIMER_EVENT(orted_globals.fail_delay, 0, shutdown_callback, ORTE_SYS_PRI);
                
            } else {
                opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
                            orted_globals.abort ? "abort" : "abnormal termination");

                /* do -not- call finalize as this will send a message to the HNP
                 * indicating clean termination! Instead, just forcibly cleanup
                 * the local session_dir tree and exit
                 */
                orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
                
                /* if we were ordered to abort, do so */
                if (orted_globals.abort) {
                    abort();
                }
                
                /* otherwise, return with non-zero status */
                ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
                goto DONE;
            }
        }
    }

    /* detach from controlling terminal
     * otherwise, remain attached so output can get to us
     */
    if(!orte_debug_flag &&
       !orte_debug_daemons_flag &&
       orted_globals.daemonize) {
        opal_daemon_init(NULL);
    }
    
    /* insert our contact info into our process_info struct so we
     * have it for later use and set the local daemon field to our name
     */
    orte_process_info.my_daemon_uri = orte_rml.get_contact_info();
    ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
    ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
    
    /* if I am also the hnp, then update that contact info field too */
    if (ORTE_PROC_IS_HNP) {
        orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
        ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
        ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
    }
    
    /* setup the primary daemon command receive function */
    ret = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
                                  ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);
    if (ret != ORTE_SUCCESS && ret != ORTE_ERR_NOT_IMPLEMENTED) {
        ORTE_ERROR_LOG(ret);
        goto DONE;
    }
    
    /* output a message indicating we are alive, our name, and our pid
     * for debugging purposes
     */
    if (orte_debug_daemons_flag) {
        fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
                ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
                orte_process_info.nodename);
    }

    /* We actually do *not* want the orted to voluntarily yield() the
       processor more than necessary.  The orted already blocks when
       it is doing nothing, so it doesn't use any more CPU cycles than
       it should; but when it *is* doing something, we do not want it
       to be unnecessarily delayed because it voluntarily yielded the
       processor in the middle of its work.

       For example: when a message arrives at the orted, we want the
       OS to wake up the orted in a timely fashion (which most OS's
       seem good about doing) and then we want the orted to process
       the message as fast as possible.  If the orted yields and lets
       aggressive MPI applications get the processor back, it may be a
       long time before the OS schedules the orted to run again
       (particularly if there is no IO event to wake it up).  Hence,
       routed OOB messages (for example) may be significantly delayed
       before being delivered to MPI processes, which can be
       problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
       require OOB messages for wireup, etc.). */
    opal_progress_set_yield_when_idle(false);

    /* Change the default behavior of libevent such that we want to
       continually block rather than blocking for the default timeout
       and then looping around the progress engine again.  There
       should be nothing in the orted that cannot block in libevent
       until "something" happens (i.e., there's no need to keep
       cycling through progress because the only things that should
       happen will happen in libevent).  This is a minor optimization,
       but what the heck... :-) */
    opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);

    /* if requested, obtain and report a new process name and my uri to the indicated pipe */
    if (orted_globals.uri_pipe > 0) {
        orte_job_t *jdata;
        orte_proc_t *proc;
        orte_node_t *node;
        orte_app_context_t *app;
        char *tmp, *nptr, *sysinfo;
        int32_t ljob;

        /* setup the singleton's job */
        jdata = OBJ_NEW(orte_job_t);
        orte_plm_base_create_jobid(jdata);
        ljob = ORTE_LOCAL_JOBID(jdata->jobid);
        opal_pointer_array_set_item(orte_job_data, ljob, jdata);

        /* must create a map for it (even though it has no
         * info in it) so that the job info will be picked
         * up in subsequent pidmaps or other daemons won't
         * know how to route
         */
        jdata->map = OBJ_NEW(orte_job_map_t);

        /* setup an app_context for the singleton */
        app = OBJ_NEW(orte_app_context_t);
        app->app = strdup("singleton");
        app->num_procs = 1;
        opal_pointer_array_add(jdata->apps, app);
        
#if 0
        /* run our local allocator to read the available
         * allocation in case this singleton decides to
         * comm_spawn other procs
         */
        if (ORTE_SUCCESS != (ret = orte_ras.allocate(jdata))) {
            ORTE_ERROR_LOG(ret);
            /* don't quit as this would cause the singleton
             * to hang!
             */
        }
#endif
        
        /* setup a proc object for the singleton - since we
         * -must- be the HNP, and therefore we stored our
         * node on the global node pool, and since the singleton
         * -must- be on the same node as us, indicate that
         */
        proc = OBJ_NEW(orte_proc_t);
        proc->name.jobid = jdata->jobid;
        proc->name.vpid = 0;
        proc->alive = true;
        proc->state = ORTE_PROC_STATE_RUNNING;
        proc->app_idx = 0;
        /* obviously, it is on my node */
        node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
        proc->node = node;
        OBJ_RETAIN(node);  /* keep accounting straight */
        opal_pointer_array_add(jdata->procs, proc);
        jdata->num_procs = 1;
        /* and obviously it is one of my local procs */
        OBJ_RETAIN(proc);
        opal_pointer_array_add(orte_local_children, proc);
        jdata->num_local_procs = 1;
        /* set the trivial */
        proc->local_rank = 0;
        proc->node_rank = 0;
        proc->app_rank = 0;
        proc->state = ORTE_PROC_STATE_RUNNING;
        proc->alive = true;
        proc->app_idx = 0;
        proc->local_proc = true;
#if OPAL_HAVE_HWLOC
        proc->bind_idx = 0;
#endif

        /* the singleton will use the first three collectives
         * for its modex/barriers
         */
        orte_grpcomm_base.coll_id += 3;

        /* need to setup a pidmap for it */
        jdata->pmap = (opal_byte_object_t*)malloc(sizeof(opal_byte_object_t));
        if (ORTE_SUCCESS != (ret = orte_util_encode_pidmap(jdata->pmap))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
    
    
        /* if we don't yet have a daemon map, then we have to generate one
         * to pass back to it
         */
        if (NULL == orte_odls_globals.dmap) {
            orte_odls_globals.dmap = (opal_byte_object_t*)malloc(sizeof(opal_byte_object_t));
            /* construct a nodemap */
            if (ORTE_SUCCESS != (ret = orte_util_encode_nodemap(orte_odls_globals.dmap))) {
                ORTE_ERROR_LOG(ret);
                goto DONE;
            }
        }

        /* create a string that contains our uri + the singleton's name + sysinfo */
        orte_util_convert_process_name_to_string(&nptr, &proc->name);
        orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
        asprintf(&tmp, "%s[%s][%s]", orte_process_info.my_daemon_uri, nptr, sysinfo);
        free(nptr);
	free(sysinfo);

        /* pass that info to the singleton */
#ifndef __WINDOWS__
        write(orted_globals.uri_pipe, tmp, strlen(tmp)+1); /* need to add 1 to get the NULL */
#else
        send(orted_globals.uri_pipe, tmp, strlen(tmp)+1, 0); /* need to add 1 to get the NULL */
#endif

        /* cleanup */
        free(tmp);
    }

    /* if we were given a pipe to monitor for singleton termination, set that up */
    if (orted_globals.singleton_died_pipe > 0) {
        /* register shutdown handler */
        pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
        opal_event_set(orte_event_base, pipe_handler,
                       orted_globals.singleton_died_pipe,
                       OPAL_EV_READ,
                       pipe_closed,
                       pipe_handler);
        opal_event_add(pipe_handler, NULL);
    }

    /* If I have a parent, then save his contact info so
     * any messages we send can flow thru him.
     */
    mca_base_param_reg_string_name("orte", "parent_uri",
                                   "URI for the parent if tree launch is enabled.",
                                   true, false, NULL,  &rml_uri);
    if (NULL != rml_uri) {
        orte_process_name_t parent;

        /* set the contact info into the hash table */
        if (ORTE_SUCCESS != (ret = orte_rml.set_contact_info(rml_uri))) {
            ORTE_ERROR_LOG(ret);
            free(rml_uri);
            goto DONE;
        }
        ret = orte_rml_base_parse_uris(rml_uri, &parent, NULL );
        if( ORTE_SUCCESS != ret ) {
            ORTE_ERROR_LOG(ret);
            free(rml_uri);
            goto DONE;
        }
        free(rml_uri);
        /* tell the routed module that we have a path
         * back to the HNP
         */
        if (ORTE_SUCCESS != (ret = orte_routed.update_route(ORTE_PROC_MY_HNP, &parent))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
        /* set the lifeline to point to our parent so that we
         * can handle the situation if that lifeline goes away
         */
        if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(&parent))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
    }

    /* if we are not the HNP...the only time we will be an HNP
     * is if we are launched by a singleton to provide support
     * for it
     */
    if (!ORTE_PROC_IS_HNP) {
        /* send the information to the orted report-back point - this function
         * will process the data, but also counts the number of
         * orteds that reported back so the launch procedure can continue.
         * We need to do this at the last possible second as the HNP
         * can turn right around and begin issuing orders to us
         */

        buffer = OBJ_NEW(opal_buffer_t);
        /* insert our name for rollup purposes */
        if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
            ORTE_ERROR_LOG(ret);
            OBJ_RELEASE(buffer);
            goto DONE;
        }
        /* for now, always include our contact info, even if we are using
         * static ports. Eventually, this will be removed
         */
        rml_uri = orte_rml.get_contact_info();
        if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &rml_uri, 1, OPAL_STRING))) {
            ORTE_ERROR_LOG(ret);
            OBJ_RELEASE(buffer);
            goto DONE;
        }

        /* include our node name */
        opal_dss.pack(buffer, &orte_process_info.nodename, 1, OPAL_STRING);
        
#if OPAL_HAVE_HWLOC
        /* add the local topology */
        if (NULL != opal_hwloc_topology &&
            (1 == ORTE_PROC_MY_NAME->vpid || orte_hetero_nodes)) {
            if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &opal_hwloc_topology, 1, OPAL_HWLOC_TOPO))) {
                ORTE_ERROR_LOG(ret);
            }
        }
#endif

        if ((orte_static_ports || orte_use_common_port) && !orted_globals.tree_spawn) {
            /* use the rollup collective to send our data to the HNP
             * so we minimize the HNP bottleneck
             */
            orte_grpcomm_collective_t *coll;
            coll = OBJ_NEW(orte_grpcomm_collective_t);
            /* get the list of contributors we need from the routed module */
            orte_routed.get_routing_list(ORTE_GRPCOMM_COLL_PEERS, coll);
            /* add the collective to our list */
            opal_list_append(&orte_grpcomm_base.active_colls, &coll->super);
            /* send the buffer to ourselves to start the collective */
            if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_NAME, buffer,
                                                   ORTE_RML_TAG_ROLLUP, 0,
                                                   rml_cbfunc, NULL))) {
                ORTE_ERROR_LOG(ret);
                OBJ_RELEASE(buffer);
                goto DONE;
            }
        } else {
            /* send directly to the HNP's callback */
            if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_HNP, buffer,
                                                   ORTE_RML_TAG_ORTED_CALLBACK, 0,
                                                   rml_cbfunc, NULL))) {
                ORTE_ERROR_LOG(ret);
                OBJ_RELEASE(buffer);
                goto DONE;
            }
        }
    }

    if (orte_debug_daemons_flag) {
        opal_output(0, "%s orted: up and running - waiting for commands!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
    }

    /* loop the event lib until an exit event is detected */
    while (orte_event_base_active) {
        opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
    }

    /* ensure all local procs are dead */
    orte_odls.kill_local_procs(NULL);

 DONE:
    /* update the exit status, in case it wasn't done */
    ORTE_UPDATE_EXIT_STATUS(orte_exit_status);

    /* cleanup and leave */
    orte_finalize();

    if (orte_debug_flag) {
        fprintf(stderr, "exiting with status %d\n", orte_exit_status);
    }
    exit(orte_exit_status);
}
Beispiel #2
0
int main(int argc, char *argv[])
{
    int ret = 0;
    int fd;
    opal_cmd_line_t *cmd_line = NULL;
    char *log_path = NULL;
    char log_file[PATH_MAX];
    char *jobidstring;
    orte_gpr_value_t *value;
    char *segment;
    int i;
    orte_buffer_t answer;
    char *umask_str;

    /* Allow the PLS starters to pass us a umask to use, if required.
       Most starters by default can do something sane with the umask,
       but some (like TM) do not pass on the umask but instead inherit
       it form the root level process starter.  This has to happen
       before opal_init and everything else so that the couple of
       places that stash a umask end up with the correct value.  Only
       do it here (and not in orte_daemon) mainly to make it clear
       that this should only happen when starting an orted for the
       first time.  All startes I'm aware of that don't require an
       orted are smart enough to pass on a reasonable umask, so they
       wouldn't need this functionality anyway. */
    umask_str = getenv("ORTE_DAEMON_UMASK_VALUE");
    if (NULL != umask_str) {
        char *endptr;
        long mask = strtol(umask_str, &endptr, 8);
        if ((! (0 == mask && (EINVAL == errno || ERANGE == errno))) &&
            (*endptr == '\0')) {
            umask(mask);
        }
    }

    /* initialize the globals */
    memset(&orted_globals, 0, sizeof(orted_globals_t));

    /* Ensure that enough of OPAL is setup for us to be able to run */
    if (OPAL_SUCCESS != opal_init_util()) {
        fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
        exit(1);
    }

    /* save the environment for use when launching application processes */
    orted_globals.saved_environ = opal_argv_copy(environ);

    /* setup mca param system */
    mca_base_param_init();
    
    /* setup to check common command line options that just report and die */
    cmd_line = OBJ_NEW(opal_cmd_line_t);
    opal_cmd_line_create(cmd_line, orte_cmd_line_opts);
    if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false,
                                                   argc, argv))) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        opal_show_help("help-orted.txt", "orted:usage", false,
                       argv[0], args);
        free(args);
        return ret;
    }

    /* check for help request */
    if (orted_globals.help) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        opal_show_help("help-orted.txt", "orted:usage", false,
                       argv[0], args);
        free(args);
        return 1;
    }

    /* see if we were directed to separate from current session */
    if (orted_globals.set_sid) {
        setsid();
    }
    
    /* see if they want us to spin until they can connect a debugger to us */
    i=0;
    while (orted_globals.spin) {
        i++;
        if (1000 < i) i=0;        
    }
    
    /* Okay, now on to serious business! */
    
    /* Ensure the process info structure in instantiated and initialized
     * and set the daemon flag to true
     */
    orte_process_info.daemon = true;

    /*
     * If the daemon was given a name on the command line, need to set the
     * proper indicators in the environment so the name discovery service
     * can find it
     */
    if (orted_globals.name) {
        if (ORTE_SUCCESS != (ret = opal_setenv("OMPI_MCA_ns_nds",
                                              "env", true, &environ))) {
            opal_show_help("help-orted.txt", "orted:environ", false,
                           "OMPI_MCA_ns_nds", "env", ret);
            return ret;
        }
        if (ORTE_SUCCESS != (ret = opal_setenv("OMPI_MCA_ns_nds_name",
                                  orted_globals.name, true, &environ))) {
            opal_show_help("help-orted.txt", "orted:environ", false,
                           "OMPI_MCA_ns_nds_name", orted_globals.name, ret);
            return ret;
        }
        /* the following values are meaningless to the daemon, but may have
         * been passed in anyway. we set them here because the nds_env component
         * requires that they be set
         */
        if (ORTE_SUCCESS != (ret = opal_setenv("OMPI_MCA_ns_nds_vpid_start",
                                  orted_globals.vpid_start, true, &environ))) {
            opal_show_help("help-orted.txt", "orted:environ", false,
                           "OMPI_MCA_ns_nds_vpid_start", orted_globals.vpid_start, ret);
            return ret;
        }
        if (ORTE_SUCCESS != (ret = opal_setenv("OMPI_MCA_ns_nds_num_procs",
                                  orted_globals.num_procs, true, &environ))) {
            opal_show_help("help-orted.txt", "orted:environ", false,
                           "OMPI_MCA_ns_nds_num_procs", orted_globals.num_procs, ret);
            return ret;
        }
    }
    if (orted_globals.ns_nds) {
        if (ORTE_SUCCESS != (ret = opal_setenv("OMPI_MCA_ns_nds",
                                               orted_globals.ns_nds, true, &environ))) {
            opal_show_help("help-orted.txt", "orted:environ", false,
                           "OMPI_MCA_ns_nds", "env", ret);
            return ret;
        }
    }

    /* turn on debug if debug_file is requested so output will be generated */
    if (orted_globals.debug_daemons_file) {
        orted_globals.debug_daemons = true;
    }

    /* detach from controlling terminal
     * otherwise, remain attached so output can get to us
     */
    if(orted_globals.debug == false &&
       orted_globals.debug_daemons == false &&
       orted_globals.no_daemonize == false) {
        opal_daemon_init(NULL);
    }

    /* Intialize the Open RTE */
    /* Set the flag telling orte_init that I am NOT a
     * singleton, but am "infrastructure" - prevents setting
     * up incorrect infrastructure that only a singleton would
     * require
     */
    if (ORTE_SUCCESS != (ret = orte_init(true))) {
        opal_show_help("help-orted.txt", "orted:init-failure", false,
                       "orte_init()", ret);
        return ret;
    }

    /* Set signal handlers to catch kill signals so we can properly clean up
     * after ourselves. 
     */
    opal_event_set(&term_handler, SIGTERM, OPAL_EV_SIGNAL,
                   signal_callback, NULL);
    opal_event_add(&term_handler, NULL);
    opal_event_set(&int_handler, SIGINT, OPAL_EV_SIGNAL,
                   signal_callback, NULL);
    opal_event_add(&int_handler, NULL);

    /* if requested, report my uri to the indicated pipe */
    if (orted_globals.uri_pipe > 0) {
        write(orted_globals.uri_pipe, orte_universe_info.seed_uri,
                    strlen(orte_universe_info.seed_uri)+1); /* need to add 1 to get the NULL */
        close(orted_globals.uri_pipe);
    }

    /* setup stdout/stderr */
    if (orted_globals.debug_daemons_file) {
        /* if we are debugging to a file, then send stdout/stderr to
         * the orted log file
         */

        /* get my jobid */
        if (ORTE_SUCCESS != (ret = orte_ns.get_jobid_string(&jobidstring,
                                        orte_process_info.my_name))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }

        /* define a log file name in the session directory */
        sprintf(log_file, "output-orted-%s-%s.log",
                jobidstring, orte_system_info.nodename);
        log_path = opal_os_path(false,
                                orte_process_info.tmpdir_base,
                                orte_process_info.top_session_dir,
                                log_file,
                                NULL);

        fd = open(log_path, O_RDWR|O_CREAT|O_TRUNC, 0640);
        if (fd < 0) {
            /* couldn't open the file for some reason, so
             * just connect everything to /dev/null
             */
             fd = open("/dev/null", O_RDWR|O_CREAT|O_TRUNC, 0666);
        } else {
            dup2(fd, STDOUT_FILENO);
            dup2(fd, STDERR_FILENO);
            if(fd != STDOUT_FILENO && fd != STDERR_FILENO) {
               close(fd);
            }
        }
    }

    /* output a message indicating we are alive, our name, and our pid
     * for debugging purposes
     */
    if (orted_globals.debug_daemons) {
        fprintf(stderr, "Daemon [%ld,%ld,%ld] checking in as pid %ld on host %s\n",
                ORTE_NAME_ARGS(orte_process_info.my_name), (long)orte_process_info.pid,
                orte_system_info.nodename);
    }

    /* setup the thread lock and condition variables */
    OBJ_CONSTRUCT(&orted_globals.mutex, opal_mutex_t);
    OBJ_CONSTRUCT(&orted_globals.condition, opal_condition_t);

    /* register the daemon main receive functions */
    ret = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_PLS_ORTED, ORTE_RML_NON_PERSISTENT, orte_daemon_recv_pls, NULL);
    if (ret != ORTE_SUCCESS && ret != ORTE_ERR_NOT_IMPLEMENTED) {
        ORTE_ERROR_LOG(ret);
        return ret;
    }
    ret = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON, ORTE_RML_NON_PERSISTENT, orte_daemon_recv, NULL);
    if (ret != ORTE_SUCCESS && ret != ORTE_ERR_NOT_IMPLEMENTED) {
        ORTE_ERROR_LOG(ret);
        return ret;
    }

    /* check to see if I'm a bootproxy */
    if (orted_globals.bootproxy) { /* perform bootproxy-specific things */
        if (orted_globals.mpi_call_yield > 0) {
            char *var;
            var = mca_base_param_environ_variable("mpi", NULL, "yield_when_idle");
            opal_setenv(var, "1", true, &environ);
        }

        /* attach a subscription to the orted standard trigger so I can get
         * information on the processes I am to locally launch as soon as all
         * the orteds for this job are started.
         *
         * Once the registry gets to 2.0, we will be able to setup the
         * subscription so we only get our own launch info back. In the interim,
         * we setup the subscription so that ALL launch info for this job
         * is returned. We will then have to parse that message to get our
         * own local launch info.
         *
         * Since we have chosen this approach, we can take advantage of the
         * fact that the callback function will directly receive this data.
         * By setting up that callback function to actually perform the launch
         * based on the received data, all we have to do here is go into our
         * conditioned wait until the job completes!
         *
         * Sometimes, life can be good! :-)
         */

        /** put all this registry stuff in a compound command to limit communications */
        if (ORTE_SUCCESS != (ret = orte_gpr.begin_compound_cmd())) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }

        /* let the local launcher setup a subscription for its required data. We
         * pass the local_cb_launcher function so that this gets called back - this
         * allows us to wakeup the orted so it can exit cleanly if the callback
         * generates an error
         */
        if (ORTE_SUCCESS != (ret = orte_odls.subscribe_launch_data(orted_globals.bootproxy, orted_local_cb_launcher))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }

        /* get the job segment name */
        if (ORTE_SUCCESS != (ret = orte_schema.get_job_segment_name(&segment, orted_globals.bootproxy))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }

       /** increment the orted stage gate counter */
        if (ORTE_SUCCESS != (ret = orte_gpr.create_value(&value, ORTE_GPR_KEYS_OR|ORTE_GPR_TOKENS_AND,
                                                         segment, 1, 1))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
        free(segment); /* done with this now */

        value->tokens[0] = strdup(ORTE_JOB_GLOBALS);
        if (ORTE_SUCCESS != (ret = orte_gpr.create_keyval(&(value->keyvals[0]), ORTED_LAUNCH_STAGE_GATE_CNTR, ORTE_UNDEF, NULL))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }

        /* do the increment */
        if (ORTE_SUCCESS != (ret = orte_gpr.increment_value(value))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
        OBJ_RELEASE(value);  /* done with this now */

        /** send the compound command */
        if (ORTE_SUCCESS != (ret = orte_gpr.exec_compound_cmd())) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }

        /* setup and enter the event monitor to wait for a wakeup call */
        OPAL_THREAD_LOCK(&orted_globals.mutex);
        while (false == orted_globals.exit_condition) {
            opal_condition_wait(&orted_globals.condition, &orted_globals.mutex);
        }
        OPAL_THREAD_UNLOCK(&orted_globals.mutex);

        /* make sure our local procs are dead - but don't update their state
         * on the HNP as this may be redundant
         */
        orte_odls.kill_local_procs(ORTE_JOBID_WILDCARD, false);

        /* cleanup their session directory */
        orte_session_dir_cleanup(orted_globals.bootproxy);

        /* send an ack - we are as close to done as we can be while
         * still able to communicate
         */
        OBJ_CONSTRUCT(&answer, orte_buffer_t);
        if (0 > orte_rml.send_buffer(ORTE_PROC_MY_HNP, &answer, ORTE_RML_TAG_PLS_ORTED_ACK, 0)) {
            ORTE_ERROR_LOG(ORTE_ERR_COMM_FAILURE);
        }
        OBJ_DESTRUCT(&answer);


        /* Finalize and clean up ourselves */
        if (ORTE_SUCCESS != (ret = orte_finalize())) {
            ORTE_ERROR_LOG(ret);
        }
        exit(ret);
    }

    /*
     *  Set my process status to "running". Note that this must be done
     *  after the rte init is completed.
     */
    if (ORTE_SUCCESS != (ret = orte_smr.set_proc_state(orte_process_info.my_name,
                                                     ORTE_PROC_STATE_RUNNING, 0))) {
        ORTE_ERROR_LOG(ret);
        return ret;
    }

    if (orted_globals.debug_daemons) {
        opal_output(0, "[%lu,%lu,%lu] ompid: issuing callback", ORTE_NAME_ARGS(orte_process_info.my_name));
    }

   /* go through the universe fields and see what else I need to do
     * - could be setup a virtual machine, spawn a console, etc.
     */

    if (orted_globals.debug_daemons) {
        opal_output(0, "[%lu,%lu,%lu] ompid: setting up event monitor", ORTE_NAME_ARGS(orte_process_info.my_name));
    }

     /* setup and enter the event monitor */
    OPAL_THREAD_LOCK(&orted_globals.mutex);

    while (false == orted_globals.exit_condition) {
        opal_condition_wait(&orted_globals.condition, &orted_globals.mutex);
    }

    OPAL_THREAD_UNLOCK(&orted_globals.mutex);

    if (orted_globals.debug_daemons) {
       opal_output(0, "[%lu,%lu,%lu] orted: mutex cleared - finalizing", ORTE_NAME_ARGS(orte_process_info.my_name));
    }

    /* cleanup */
    if (NULL != log_path) {
        unlink(log_path);
    }

    /* finalize the system */
    orte_finalize();

    if (orted_globals.debug_daemons) {
       opal_output(0, "[%lu,%lu,%lu] orted: done - exiting", ORTE_NAME_ARGS(orte_process_info.my_name));
    }

    exit(0);
}
Beispiel #3
0
int main(int argc, char *argv[])
{
    int ret = 0;
    opal_cmd_line_t *cmd_line = NULL;
    char *rml_uri;
#if OPAL_ENABLE_FT_CR == 1
    char * tmp_env_var = NULL;
#endif

    /* init enough of opal to process cmd lines */
    if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
        fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
        exit(1);
    }

    /* setup to check common command line options that just report and die */
    cmd_line = OBJ_NEW(opal_cmd_line_t);
    opal_cmd_line_create(cmd_line, orte_server_cmd_line_opts);
    mca_base_cmd_line_setup(cmd_line);
    if (OPAL_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false, false,
                                                   argc, argv))) {
        if (OPAL_ERR_SILENT != ret) {
            fprintf(stderr, "%s: command line error (%s)\n", argv[0],
                    opal_strerror(ret));
        }
        return 1;
    }

    /* check for help request */
    if (help) {
        char *str, *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        str = opal_show_help_string("help-orte-server.txt",
                                    "orteserver:usage", false,
                                    argv[0], args);
        if (NULL != str) {
            printf("%s", str);
            free(str);
        }
        free(args);
        /* If we show the help message, that should be all we do */
        return 0;
    }

    /*
     * Since this process can now handle MCA/GMCA parameters, make sure to
     * process them.
     */
    mca_base_cmd_line_process_args(cmd_line, &environ, &environ);

    /* if debug is set, then set orte_debug_flag so that the data server
     * code will output
     */
    if (debug) {
        putenv(OPAL_MCA_PREFIX"orte_debug=1");
    }

    /* detach from controlling terminal
     * otherwise, remain attached so output can get to us
     */
    if(debug == false &&
       no_daemonize == false) {
        opal_daemon_init(NULL);
    }

#if OPAL_ENABLE_FT_CR == 1
    /* Disable the checkpoint notification routine for this
     * tool. As we will never need to checkpoint this tool.
     * Note: This must happen before opal_init().
     */
    opal_cr_set_enabled(false);

    /* Select the none component, since we don't actually use a checkpointer */
    (void) mca_base_var_env_name("crs", &tmp_env_var);
    opal_setenv(tmp_env_var,
                "none",
                true, &environ);
    free(tmp_env_var);
    tmp_env_var = NULL;

    /* Mark as a tool program */
    (void) mca_base_var_env_name("opal_cr_is_tool", &tmp_env_var);
    opal_setenv(tmp_env_var,
                "1",
                true, &environ);
    free(tmp_env_var);
#endif

    /* don't want session directories */
    orte_create_session_dirs = false;

    /* Perform the standard init, but flag that we are an HNP */
    if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
        fprintf(stderr, "orte-server: failed to initialize -- aborting\n");
        exit(1);
    }

    /* report out our URI, if we were requested to do so, using syntax
     * proposed in an email thread by Jeff Squyres
     */
    if (NULL != report_uri) {
        orte_oob_base_get_addr(&rml_uri);
        if (0 == strcmp(report_uri, "-")) {
            /* if '-', then output to stdout */
            printf("%s\n", rml_uri);
        } else if (0 == strcmp(report_uri, "+")) {
            /* if '+', output to stderr */
            fprintf(stderr, "%s\n", rml_uri);
        } else {
            /* treat it as a filename and output into it */
            FILE *fp;
            fp = fopen(report_uri, "w");
            if (NULL == fp) {
                fprintf(stderr, "orte-server: failed to open designated file %s -- aborting\n", report_uri);
                orte_finalize();
                exit(1);
            }
            fprintf(fp, "%s\n", rml_uri);
            fclose(fp);
        }
        free(rml_uri);
    }

    /* setup the data server to listen for commands */
    if (ORTE_SUCCESS != (ret = orte_data_server_init())) {
        fprintf(stderr, "orte-server: failed to start data server -- aborting\n");
        orte_finalize();
        exit(1);
    }

    /* setup to listen for commands sent specifically to me */
    orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
                            ORTE_RML_NON_PERSISTENT, orte_daemon_recv, NULL);

    /* Set signal handlers to catch kill signals so we can properly clean up
     * after ourselves.
     */
    opal_event_set(orte_event_base, &term_handler, SIGTERM, OPAL_EV_SIGNAL,
                   shutdown_callback, NULL);
    opal_event_add(&term_handler, NULL);
    opal_event_set(orte_event_base, &int_handler, SIGINT, OPAL_EV_SIGNAL,
                   shutdown_callback, NULL);
    opal_event_add(&int_handler, NULL);

    /* We actually do *not* want the server to voluntarily yield() the
       processor more than necessary.  The server already blocks when
       it is doing nothing, so it doesn't use any more CPU cycles than
       it should; but when it *is* doing something, we do not want it
       to be unnecessarily delayed because it voluntarily yielded the
       processor in the middle of its work.

       For example: when a message arrives at the server, we want the
       OS to wake up the server in a timely fashion (which most OS's
       seem good about doing) and then we want the server to process
       the message as fast as possible.  If the server yields and lets
       aggressive MPI applications get the processor back, it may be a
       long time before the OS schedules the server to run again
       (particularly if there is no IO event to wake it up).  Hence,
       publish and lookup (for example) may be significantly delayed
       before being delivered to MPI processes, which can be
       problematic in some scenarios (e.g., COMM_SPAWN). */
    opal_progress_set_yield_when_idle(false);

    /* Change the default behavior of libevent such that we want to
       continually block rather than blocking for the default timeout
       and then looping around the progress engine again.  There
       should be nothing in the server that cannot block in libevent
       until "something" happens (i.e., there's no need to keep
       cycling through progress because the only things that should
       happen will happen in libevent).  This is a minor optimization,
       but what the heck... :-) */
    opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);

    if (debug) {
        opal_output(0, "%s orte-server: up and running!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
    }

    /* wait to hear we are done */
    while (orte_event_base_active) {
        opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
    }
    ORTE_ACQUIRE_OBJECT(orte_event_base_active);

    /* should never get here, but if we do... */

    /* Finalize and clean up ourselves */
    orte_finalize();
    return orte_exit_status;
}
Beispiel #4
0
int orte_daemon(int argc, char *argv[])
{
    int ret = 0;
    opal_cmd_line_t *cmd_line = NULL;
    char *rml_uri;
    int i;
    opal_buffer_t *buffer;
    char hostname[100];
#if OPAL_ENABLE_FT_CR == 1
    char *tmp_env_var = NULL;
#endif
    
    /* initialize the globals */
    memset(&orted_globals, 0, sizeof(orted_globals));
    /* initialize the singleton died pipe to an illegal value so we can detect it was set */
    orted_globals.singleton_died_pipe = -1;
    /* init the failure orted vpid to an invalid value */
    orted_globals.fail = ORTE_VPID_INVALID;
    
    /* setup to check common command line options that just report and die */
    cmd_line = OBJ_NEW(opal_cmd_line_t);
    if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
        OBJ_RELEASE(cmd_line);
        exit(1);
    }
    mca_base_cmd_line_setup(cmd_line);
    if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false,
                                                   argc, argv))) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
        free(args);
        OBJ_RELEASE(cmd_line);
        return ret;
    }
    
    /*
     * Since this process can now handle MCA/GMCA parameters, make sure to
     * process them.
     */
    mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
    
    /* Ensure that enough of OPAL is setup for us to be able to run */
    /*
     * NOTE: (JJH)
     *  We need to allow 'mca_base_cmd_line_process_args()' to process command
     *  line arguments *before* calling opal_init_util() since the command
     *  line could contain MCA parameters that affect the way opal_init_util()
     *  functions. AMCA parameters are one such option normally received on the
     *  command line that affect the way opal_init_util() behaves.
     *  It is "safe" to call mca_base_cmd_line_process_args() before 
     *  opal_init_util() since mca_base_cmd_line_process_args() does *not*
     *  depend upon opal_init_util() functionality.
     */
    if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
        fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
        exit(1);
    }

    /* save the environment for launch purposes. This MUST be
     * done so that we can pass it to any local procs we
     * spawn - otherwise, those local procs won't see any
     * non-MCA envars that were set in the enviro when the
     * orted was executed - e.g., by .csh
     */
    orte_launch_environ = opal_argv_copy(environ);
    
    /* purge any ess flag set in the environ when we were launched */
    opal_unsetenv(OPAL_MCA_PREFIX"ess", &orte_launch_environ);
    
    /* if orte_daemon_debug is set, let someone know we are alive right
     * away just in case we have a problem along the way
     */
    if (orted_globals.debug) {
        gethostname(hostname, 100);
        fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
    }
    
    /* check for help request */
    if (orted_globals.help) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        orte_show_help("help-orted.txt", "orted:usage", false,
                       argv[0], args);
        free(args);
        return 1;
    }
#if defined(HAVE_SETSID)
    /* see if we were directed to separate from current session */
    if (orted_globals.set_sid) {
        setsid();
    }
#endif
    /* see if they want us to spin until they can connect a debugger to us */
    i=0;
    while (orted_spin_flag) {
        i++;
        if (1000 < i) i=0;        
    }

#if OPAL_ENABLE_FT_CR == 1
    /* Mark as a tool program */
    (void) mca_base_var_env_name ("opal_cr_is_tool", &tmp_env_var);
    opal_setenv(tmp_env_var,
                "1",
                true, &environ);
    free(tmp_env_var);
#endif

    /* if mapreduce set, flag it */
    if (orted_globals.mapreduce) {
        orte_map_reduce = true;
    }

    /* detach from controlling terminal
     * otherwise, remain attached so output can get to us
     */
    if(!orte_debug_flag &&
       !orte_debug_daemons_flag &&
       orted_globals.daemonize) {
        opal_daemon_init(NULL);
    }
    
    /* Set the flag telling OpenRTE that I am NOT a
     * singleton, but am "infrastructure" - prevents setting
     * up incorrect infrastructure that only a singleton would
     * require.
     */
    if (orted_globals.hnp) {
        if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
    } else {
        if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
    }
    /* finalize the OPAL utils. As they are opened again from orte_init->opal_init
     * we continue to have a reference count on them. So we have to finalize them twice...
     */
    opal_finalize_util();

#if OPAL_HAVE_HWLOC
    /* bind ourselves if so directed */
    if (NULL != orte_daemon_cores) {
        char **cores=NULL, tmp[128];
        hwloc_obj_t pu;
        hwloc_cpuset_t ours, pucpus, res;
        int core;

        /* could be a collection of comma-delimited ranges, so
         * use our handy utility to parse it
         */
        orte_util_parse_range_options(orte_daemon_cores, &cores);
        if (NULL != cores) {
            ours = hwloc_bitmap_alloc();
            hwloc_bitmap_zero(ours);
            pucpus = hwloc_bitmap_alloc();
            res = hwloc_bitmap_alloc();
            for (i=0; NULL != cores[i]; i++) {
                core = strtoul(cores[i], NULL, 10);
                if (NULL == (pu = opal_hwloc_base_get_pu(opal_hwloc_topology, core, OPAL_HWLOC_LOGICAL))) {
                    /* turn off the show help forwarding as we won't
                     * be able to cycle the event library to send
                     */
                    orte_show_help_finalize();
                    /* the message will now come out locally */
                    orte_show_help("help-orted.txt", "orted:cannot-bind",
                                   true, orte_process_info.nodename,
                                   orte_daemon_cores);
                    ret = ORTE_ERR_NOT_SUPPORTED;
                    goto DONE;
                }
                hwloc_bitmap_and(pucpus, pu->online_cpuset, pu->allowed_cpuset);
                hwloc_bitmap_or(res, ours, pucpus);
                hwloc_bitmap_copy(ours, res);
            }
            /* if the result is all zeros, then don't bind */
            if (!hwloc_bitmap_iszero(ours)) {
                (void)hwloc_set_cpubind(opal_hwloc_topology, ours, 0);
                if (opal_hwloc_report_bindings) {
                    opal_hwloc_base_cset2mapstr(tmp, sizeof(tmp), opal_hwloc_topology, ours);
                    opal_output(0, "Daemon %s is bound to cores %s",
                                ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), tmp);
                }
            }
            /* cleanup */
            hwloc_bitmap_free(ours);
            hwloc_bitmap_free(pucpus);
            hwloc_bitmap_free(res);
            opal_argv_free(cores);
        }
    }
#endif

    if ((int)ORTE_VPID_INVALID != orted_globals.fail) {
        orted_globals.abort=false;
        /* some vpid was ordered to fail. The value can be positive
         * or negative, depending upon the desired method for failure,
         * so need to check both here
         */
        if (0 > orted_globals.fail) {
            orted_globals.fail = -1*orted_globals.fail;
            orted_globals.abort = true;
        }
        /* are we the specified vpid? */
        if ((int)ORTE_PROC_MY_NAME->vpid == orted_globals.fail) {
            /* if the user specified we delay, then setup a timer
             * and have it kill us
             */
            if (0 < orted_globals.fail_delay) {
                ORTE_TIMER_EVENT(orted_globals.fail_delay, 0, shutdown_callback, ORTE_SYS_PRI);
                
            } else {
                opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
                            orted_globals.abort ? "abort" : "abnormal termination");

                /* do -not- call finalize as this will send a message to the HNP
                 * indicating clean termination! Instead, just forcibly cleanup
                 * the local session_dir tree and exit
                 */
                orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
                
                /* if we were ordered to abort, do so */
                if (orted_globals.abort) {
                    abort();
                }
                
                /* otherwise, return with non-zero status */
                ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
                goto DONE;
            }
        }
    }

    /* insert our contact info into our process_info struct so we
     * have it for later use and set the local daemon field to our name
     */
    orte_process_info.my_daemon_uri = orte_rml.get_contact_info();
    ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
    ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
    
    /* if I am also the hnp, then update that contact info field too */
    if (ORTE_PROC_IS_HNP) {
        orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
        ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
        ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
    }
    
    /* setup the primary daemon command receive function */
    orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
                            ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);
    
    /* output a message indicating we are alive, our name, and our pid
     * for debugging purposes
     */
    if (orte_debug_daemons_flag) {
        fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
                ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
                orte_process_info.nodename);
    }

    /* We actually do *not* want the orted to voluntarily yield() the
       processor more than necessary.  The orted already blocks when
       it is doing nothing, so it doesn't use any more CPU cycles than
       it should; but when it *is* doing something, we do not want it
       to be unnecessarily delayed because it voluntarily yielded the
       processor in the middle of its work.

       For example: when a message arrives at the orted, we want the
       OS to wake up the orted in a timely fashion (which most OS's
       seem good about doing) and then we want the orted to process
       the message as fast as possible.  If the orted yields and lets
       aggressive MPI applications get the processor back, it may be a
       long time before the OS schedules the orted to run again
       (particularly if there is no IO event to wake it up).  Hence,
       routed OOB messages (for example) may be significantly delayed
       before being delivered to MPI processes, which can be
       problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
       require OOB messages for wireup, etc.). */
    opal_progress_set_yield_when_idle(false);

    /* Change the default behavior of libevent such that we want to
       continually block rather than blocking for the default timeout
       and then looping around the progress engine again.  There
       should be nothing in the orted that cannot block in libevent
       until "something" happens (i.e., there's no need to keep
       cycling through progress because the only things that should
       happen will happen in libevent).  This is a minor optimization,
       but what the heck... :-) */
    opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);

    /* if requested, report my uri to the indicated pipe */
    if (orted_globals.uri_pipe > 0) {
        orte_job_t *jdata;
        orte_proc_t *proc;
        orte_node_t *node;
        orte_app_context_t *app;
        char *tmp, *nptr, *sysinfo;
        int32_t ljob;

        /* setup the singleton's job */
        jdata = OBJ_NEW(orte_job_t);
        orte_plm_base_create_jobid(jdata);
        ljob = ORTE_LOCAL_JOBID(jdata->jobid);
        opal_pointer_array_set_item(orte_job_data, ljob, jdata);

        /* must create a map for it (even though it has no
         * info in it) so that the job info will be picked
         * up in subsequent pidmaps or other daemons won't
         * know how to route
         */
        jdata->map = OBJ_NEW(orte_job_map_t);

        /* setup an app_context for the singleton */
        app = OBJ_NEW(orte_app_context_t);
        app->app = strdup("singleton");
        app->num_procs = 1;
        opal_pointer_array_add(jdata->apps, app);
        
        /* setup a proc object for the singleton - since we
         * -must- be the HNP, and therefore we stored our
         * node on the global node pool, and since the singleton
         * -must- be on the same node as us, indicate that
         */
        proc = OBJ_NEW(orte_proc_t);
        proc->name.jobid = jdata->jobid;
        proc->name.vpid = 0;
        ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_ALIVE);
        proc->state = ORTE_PROC_STATE_RUNNING;
        proc->app_idx = 0;
        /* obviously, it is on my node */
        node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
        proc->node = node;
        OBJ_RETAIN(node);  /* keep accounting straight */
        opal_pointer_array_add(jdata->procs, proc);
        jdata->num_procs = 1;
        /* and it obviously is on the node */
        OBJ_RETAIN(proc);
        opal_pointer_array_add(node->procs, proc);
        node->num_procs++;
        /* and obviously it is one of my local procs */
        OBJ_RETAIN(proc);
        opal_pointer_array_add(orte_local_children, proc);
        jdata->num_local_procs = 1;
        /* set the trivial */
        proc->local_rank = 0;
        proc->node_rank = 0;
        proc->app_rank = 0;
        proc->state = ORTE_PROC_STATE_RUNNING;
        proc->app_idx = 0;
        ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_LOCAL);

        /* create a string that contains our uri + sysinfo + PMIx server URI */
        orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
        asprintf(&tmp, "%s[%s]%s", orte_process_info.my_daemon_uri, sysinfo, pmix_server_uri);
	free(sysinfo);

        /* pass that info to the singleton */
        write(orted_globals.uri_pipe, tmp, strlen(tmp)+1); /* need to add 1 to get the NULL */

        /* cleanup */
        free(tmp);

        /* since a singleton spawned us, we need to harvest
         * any MCA params from the local environment so
         * we can pass them along to any subsequent daemons
         * we may start as the result of a comm_spawn
         */
        for (i=0; NULL != environ[i]; i++) {
            if (0 == strncmp(environ[i], OPAL_MCA_PREFIX, 9)) {
                /* make a copy to manipulate */
                tmp = strdup(environ[i]);
                /* find the equal sign */
                nptr = strchr(tmp, '=');
                *nptr = '\0';
                nptr++;
                /* add the mca param to the orted cmd line */
                opal_argv_append_nosize(&orted_cmd_line, "-"OPAL_MCA_CMD_LINE_ID);
                opal_argv_append_nosize(&orted_cmd_line, &tmp[9]);
                opal_argv_append_nosize(&orted_cmd_line, nptr);
                free(tmp);
            }
        }
    }

    /* if we were given a pipe to monitor for singleton termination, set that up */
    if (orted_globals.singleton_died_pipe > 0) {
        /* register shutdown handler */
        pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
        opal_event_set(orte_event_base, pipe_handler,
                       orted_globals.singleton_died_pipe,
                       OPAL_EV_READ,
                       pipe_closed,
                       pipe_handler);
        opal_event_add(pipe_handler, NULL);
    }

    /* If I have a parent, then save his contact info so
     * any messages we send can flow thru him.
     */

    orte_parent_uri = NULL;
    (void) mca_base_var_register ("orte", "orte", NULL, "parent_uri",
                                  "URI for the parent if tree launch is enabled.",
                                  MCA_BASE_VAR_TYPE_STRING, NULL, 0,
                                  MCA_BASE_VAR_FLAG_INTERNAL,
                                  OPAL_INFO_LVL_9,
                                  MCA_BASE_VAR_SCOPE_CONSTANT,
                                  &orte_parent_uri);
    if (NULL != orte_parent_uri) {
        orte_process_name_t parent;

        /* set the contact info into the hash table */
        orte_rml.set_contact_info(orte_parent_uri);
        ret = orte_rml_base_parse_uris(orte_parent_uri, &parent, NULL);
        if (ORTE_SUCCESS != ret) {
            ORTE_ERROR_LOG(ret);
            free (orte_parent_uri);
            orte_parent_uri = NULL;
            goto DONE;
        }

        /* don't need this value anymore */
        free(orte_parent_uri);
        orte_parent_uri = NULL;

        /* tell the routed module that we have a path
         * back to the HNP
         */
        if (ORTE_SUCCESS != (ret = orte_routed.update_route(ORTE_PROC_MY_HNP, &parent))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
        /* set the lifeline to point to our parent so that we
         * can handle the situation if that lifeline goes away
         */
        if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(&parent))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
    }

    /* if we are not the HNP...the only time we will be an HNP
     * is if we are launched by a singleton to provide support
     * for it
     */
    if (!ORTE_PROC_IS_HNP) {
        /* send the information to the orted report-back point - this function
         * will process the data, but also counts the number of
         * orteds that reported back so the launch procedure can continue.
         * We need to do this at the last possible second as the HNP
         * can turn right around and begin issuing orders to us
         */

        buffer = OBJ_NEW(opal_buffer_t);
        /* insert our name for rollup purposes */
        if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
            ORTE_ERROR_LOG(ret);
            OBJ_RELEASE(buffer);
            goto DONE;
        }
        /* for now, always include our contact info, even if we are using
         * static ports. Eventually, this will be removed
         */
        rml_uri = orte_rml.get_contact_info();
        if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &rml_uri, 1, OPAL_STRING))) {
            ORTE_ERROR_LOG(ret);
            OBJ_RELEASE(buffer);
            goto DONE;
        }

        /* include our node name */
        opal_dss.pack(buffer, &orte_process_info.nodename, 1, OPAL_STRING);

        /* if requested, include any non-loopback aliases for this node */
        if (orte_retain_aliases) {
            char **aliases=NULL;
            uint8_t naliases, ni;
            char hostname[ORTE_MAX_HOSTNAME_SIZE];

            /* if we stripped the prefix or removed the fqdn,
             * include full hostname as an alias
             */
            gethostname(hostname, ORTE_MAX_HOSTNAME_SIZE);
            if (strlen(orte_process_info.nodename) < strlen(hostname)) {
                opal_argv_append_nosize(&aliases, hostname);
            }
            opal_ifgetaliases(&aliases);
            naliases = opal_argv_count(aliases);
            if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &naliases, 1, OPAL_UINT8))) {
                ORTE_ERROR_LOG(ret);
                OBJ_RELEASE(buffer);
                goto DONE;
            }
            for (ni=0; ni < naliases; ni++) {
                if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &aliases[ni], 1, OPAL_STRING))) {
                    ORTE_ERROR_LOG(ret);
                    OBJ_RELEASE(buffer);
                    goto DONE;
                }
            }
            opal_argv_free(aliases);
        }

#if OPAL_HAVE_HWLOC
        {
            char *coprocessors;
            /* add the local topology */
            if (NULL != opal_hwloc_topology &&
                (1 == ORTE_PROC_MY_NAME->vpid || orte_hetero_nodes)) {
                if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &opal_hwloc_topology, 1, OPAL_HWLOC_TOPO))) {
                    ORTE_ERROR_LOG(ret);
                }
            }
            /* detect and add any coprocessors */
            coprocessors = opal_hwloc_base_find_coprocessors(opal_hwloc_topology);
            if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &coprocessors, 1, OPAL_STRING))) {
                ORTE_ERROR_LOG(ret);
            }
            /* see if I am on a coprocessor */
            coprocessors = opal_hwloc_base_check_on_coprocessor();
            if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &coprocessors, 1, OPAL_STRING))) {
                ORTE_ERROR_LOG(ret);
            }
        }
#endif

        /* send to the HNP's callback - will be routed if routes are available */
        if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_HNP, buffer,
                                               ORTE_RML_TAG_ORTED_CALLBACK,
                                               orte_rml_send_callback, NULL))) {
            ORTE_ERROR_LOG(ret);
            OBJ_RELEASE(buffer);
            goto DONE;
        }
    }

    /* if we are tree-spawning, then we need to capture the MCA params
     * from our cmd line so we can pass them along to the daemons we spawn -
     * otherwise, only the first layer of daemons will ever see them
     */
    if (orted_globals.tree_spawn) {
        int j, k;
        bool ignore;
        char *no_keep[] = {
            "orte_hnp_uri",
            "orte_ess_jobid",
            "orte_ess_vpid",
            "orte_ess_num_procs",
            "orte_parent_uri",
            "mca_base_env_list",
            NULL
        };
        for (i=0; i < argc; i++) {
            if (0 == strcmp("-"OPAL_MCA_CMD_LINE_ID,  argv[i]) ||
                0 == strcmp("--"OPAL_MCA_CMD_LINE_ID, argv[i]) ) {
                ignore = false;
                /* see if this is something we cannot pass along */
                for (k=0; NULL != no_keep[k]; k++) {
                    if (0 == strcmp(no_keep[k], argv[i+1])) {
                        ignore = true;
                        break;
                    }
                }
                if (!ignore) {
                    /* see if this is already present so we at least can
                     * avoid growing the cmd line with duplicates
                     */
                    if (NULL != orted_cmd_line) {
                        for (j=0; NULL != orted_cmd_line[j]; j++) {
                            if (0 == strcmp(argv[i+1], orted_cmd_line[j])) {
                                /* already here - ignore it */
                                ignore = true;
                                break;
                            }
                        }
                    }
                    if (!ignore) {
                        opal_argv_append_nosize(&orted_cmd_line, argv[i]);
                        opal_argv_append_nosize(&orted_cmd_line, argv[i+1]);
                        opal_argv_append_nosize(&orted_cmd_line, argv[i+2]);
                    }
                }
                i += 2;
            }
        }
    }
            
    if (orte_debug_daemons_flag) {
        opal_output(0, "%s orted: up and running - waiting for commands!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
    }
    ret = ORTE_SUCCESS;

    /* loop the event lib until an exit event is detected */
    while (orte_event_base_active) {
        opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
    }

    /* ensure all local procs are dead */
    orte_odls.kill_local_procs(NULL);

 DONE:
    /* update the exit status, in case it wasn't done */
    ORTE_UPDATE_EXIT_STATUS(ret);

    /* cleanup and leave */
    orte_finalize();

    if (orte_debug_flag) {
        fprintf(stderr, "exiting with status %d\n", orte_exit_status);
    }
    exit(orte_exit_status);
}
Beispiel #5
0
int orte_daemon(int argc, char *argv[])
{
    int ret = 0;
    opal_cmd_line_t *cmd_line = NULL;
    int i;
    opal_buffer_t *buffer;
    char hostname[OPAL_MAXHOSTNAMELEN];
#if OPAL_ENABLE_FT_CR == 1
    char *tmp_env_var = NULL;
#endif

    /* initialize the globals */
    memset(&orted_globals, 0, sizeof(orted_globals));
    /* initialize the singleton died pipe to an illegal value so we can detect it was set */
    orted_globals.singleton_died_pipe = -1;
    bucket = OBJ_NEW(opal_buffer_t);

    /* setup to check common command line options that just report and die */
    cmd_line = OBJ_NEW(opal_cmd_line_t);
    if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
        OBJ_RELEASE(cmd_line);
        exit(1);
    }
    mca_base_cmd_line_setup(cmd_line);
    if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false, false,
                                                   argc, argv))) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
        free(args);
        OBJ_RELEASE(cmd_line);
        return ret;
    }

    /*
     * Since this process can now handle MCA/GMCA parameters, make sure to
     * process them.
     */
    mca_base_cmd_line_process_args(cmd_line, &environ, &environ);

    /* Ensure that enough of OPAL is setup for us to be able to run */
    /*
     * NOTE: (JJH)
     *  We need to allow 'mca_base_cmd_line_process_args()' to process command
     *  line arguments *before* calling opal_init_util() since the command
     *  line could contain MCA parameters that affect the way opal_init_util()
     *  functions. AMCA parameters are one such option normally received on the
     *  command line that affect the way opal_init_util() behaves.
     *  It is "safe" to call mca_base_cmd_line_process_args() before
     *  opal_init_util() since mca_base_cmd_line_process_args() does *not*
     *  depend upon opal_init_util() functionality.
     */
    if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
        fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
        exit(1);
    }

    /* save the environment for launch purposes. This MUST be
     * done so that we can pass it to any local procs we
     * spawn - otherwise, those local procs won't see any
     * non-MCA envars that were set in the enviro when the
     * orted was executed - e.g., by .csh
     */
    orte_launch_environ = opal_argv_copy(environ);

    /* purge any ess/pmix flags set in the environ when we were launched */
    opal_unsetenv(OPAL_MCA_PREFIX"ess", &orte_launch_environ);
    opal_unsetenv(OPAL_MCA_PREFIX"pmix", &orte_launch_environ);

    /* if orte_daemon_debug is set, let someone know we are alive right
     * away just in case we have a problem along the way
     */
    if (orted_globals.debug) {
        gethostname(hostname, sizeof(hostname));
        fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
    }

    /* check for help request */
    if (orted_globals.help) {
        char *args = NULL;
        args = opal_cmd_line_get_usage_msg(cmd_line);
        orte_show_help("help-orted.txt", "orted:usage", false,
                       argv[0], args);
        free(args);
        return 1;
    }
#if defined(HAVE_SETSID)
    /* see if we were directed to separate from current session */
    if (orted_globals.set_sid) {
        setsid();
    }
#endif
    /* see if they want us to spin until they can connect a debugger to us */
    i=0;
    while (orted_spin_flag) {
        i++;
        if (1000 < i) i=0;
    }

#if OPAL_ENABLE_FT_CR == 1
    /* Mark as a tool program */
    (void) mca_base_var_env_name ("opal_cr_is_tool", &tmp_env_var);
    opal_setenv(tmp_env_var,
                "1",
                true, &environ);
    free(tmp_env_var);
#endif

    /* detach from controlling terminal
     * otherwise, remain attached so output can get to us
     */
    if(!orte_debug_flag &&
       !orte_debug_daemons_flag &&
       orted_globals.daemonize) {
        opal_daemon_init(NULL);
    }

    /* Set the flag telling OpenRTE that I am NOT a
     * singleton, but am "infrastructure" - prevents setting
     * up incorrect infrastructure that only a singleton would
     * require.
     */
    if (orted_globals.hnp) {
        if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
    } else {
        if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
            ORTE_ERROR_LOG(ret);
            return ret;
        }
    }

    /* finalize the OPAL utils. As they are opened again from orte_init->opal_init
     * we continue to have a reference count on them. So we have to finalize them twice...
     */
    opal_finalize_util();

    /* bind ourselves if so directed */
    if (NULL != orte_daemon_cores) {
        char **cores=NULL, tmp[128];
        hwloc_obj_t pu;
        hwloc_cpuset_t ours, res;
        int core;

        /* could be a collection of comma-delimited ranges, so
         * use our handy utility to parse it
         */
        orte_util_parse_range_options(orte_daemon_cores, &cores);
        if (NULL != cores) {
            ours = hwloc_bitmap_alloc();
            hwloc_bitmap_zero(ours);
            res = hwloc_bitmap_alloc();
            for (i=0; NULL != cores[i]; i++) {
                core = strtoul(cores[i], NULL, 10);
                if (NULL == (pu = opal_hwloc_base_get_pu(opal_hwloc_topology, core, OPAL_HWLOC_LOGICAL))) {
                    /* turn off the show help forwarding as we won't
                     * be able to cycle the event library to send
                     */
                    orte_show_help_finalize();
                    /* the message will now come out locally */
                    orte_show_help("help-orted.txt", "orted:cannot-bind",
                                   true, orte_process_info.nodename,
                                   orte_daemon_cores);
                    ret = ORTE_ERR_NOT_SUPPORTED;
                    hwloc_bitmap_free(ours);
                    hwloc_bitmap_free(res);
                    goto DONE;
                }
                hwloc_bitmap_or(res, ours, pu->cpuset);
                hwloc_bitmap_copy(ours, res);
            }
            /* if the result is all zeros, then don't bind */
            if (!hwloc_bitmap_iszero(ours)) {
                (void)hwloc_set_cpubind(opal_hwloc_topology, ours, 0);
                if (opal_hwloc_report_bindings) {
                    opal_hwloc_base_cset2mapstr(tmp, sizeof(tmp), opal_hwloc_topology, ours);
                    opal_output(0, "Daemon %s is bound to cores %s",
                                ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), tmp);
                }
            }
            /* cleanup */
            hwloc_bitmap_free(ours);
            hwloc_bitmap_free(res);
            opal_argv_free(cores);
        }
    }

    if ((int)ORTE_VPID_INVALID != orted_debug_failure) {
        orted_globals.abort=false;
        /* some vpid was ordered to fail. The value can be positive
         * or negative, depending upon the desired method for failure,
         * so need to check both here
         */
        if (0 > orted_debug_failure) {
            orted_debug_failure = -1*orted_debug_failure;
            orted_globals.abort = true;
        }
        /* are we the specified vpid? */
        if ((int)ORTE_PROC_MY_NAME->vpid == orted_debug_failure) {
            /* if the user specified we delay, then setup a timer
             * and have it kill us
             */
            if (0 < orted_debug_failure_delay) {
                ORTE_TIMER_EVENT(orted_debug_failure_delay, 0, shutdown_callback, ORTE_SYS_PRI);

            } else {
                opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
                            orted_globals.abort ? "abort" : "abnormal termination");

                /* do -not- call finalize as this will send a message to the HNP
                 * indicating clean termination! Instead, just forcibly cleanup
                 * the local session_dir tree and exit
                 */
                orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);

                /* if we were ordered to abort, do so */
                if (orted_globals.abort) {
                    abort();
                }

                /* otherwise, return with non-zero status */
                ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
                goto DONE;
            }
        }
    }

    /* insert our contact info into our process_info struct so we
     * have it for later use and set the local daemon field to our name
     */
    orte_oob_base_get_addr(&orte_process_info.my_daemon_uri);
    if (NULL == orte_process_info.my_daemon_uri) {
        /* no way to communicate */
        ret = ORTE_ERROR;
        goto DONE;
    }
    ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
    ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;

    /* if I am also the hnp, then update that contact info field too */
    if (ORTE_PROC_IS_HNP) {
        orte_process_info.my_hnp_uri = strdup(orte_process_info.my_daemon_uri);
        ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
        ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
    }

    /* setup the primary daemon command receive function */
    orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
                            ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);

    /* output a message indicating we are alive, our name, and our pid
     * for debugging purposes
     */
    if (orte_debug_daemons_flag) {
        fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
                ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
                orte_process_info.nodename);
    }

    /* We actually do *not* want the orted to voluntarily yield() the
       processor more than necessary.  The orted already blocks when
       it is doing nothing, so it doesn't use any more CPU cycles than
       it should; but when it *is* doing something, we do not want it
       to be unnecessarily delayed because it voluntarily yielded the
       processor in the middle of its work.

       For example: when a message arrives at the orted, we want the
       OS to wake up the orted in a timely fashion (which most OS's
       seem good about doing) and then we want the orted to process
       the message as fast as possible.  If the orted yields and lets
       aggressive MPI applications get the processor back, it may be a
       long time before the OS schedules the orted to run again
       (particularly if there is no IO event to wake it up).  Hence,
       routed OOB messages (for example) may be significantly delayed
       before being delivered to MPI processes, which can be
       problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
       require OOB messages for wireup, etc.). */
    opal_progress_set_yield_when_idle(false);

    /* Change the default behavior of libevent such that we want to
       continually block rather than blocking for the default timeout
       and then looping around the progress engine again.  There
       should be nothing in the orted that cannot block in libevent
       until "something" happens (i.e., there's no need to keep
       cycling through progress because the only things that should
       happen will happen in libevent).  This is a minor optimization,
       but what the heck... :-) */
    opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);

    /* if requested, report my uri to the indicated pipe */
    if (orted_globals.uri_pipe > 0) {
        orte_job_t *jdata;
        orte_proc_t *proc;
        orte_node_t *node;
        orte_app_context_t *app;
        char *tmp, *nptr, *sysinfo;
        char **singenv=NULL, *string_key, *env_str;

        /* setup the singleton's job */
        jdata = OBJ_NEW(orte_job_t);
        /* default to ompi for now */
        opal_argv_append_nosize(&jdata->personality, "ompi");
        orte_plm_base_create_jobid(jdata);
        opal_hash_table_set_value_uint32(orte_job_data, jdata->jobid, jdata);

        /* must create a map for it (even though it has no
         * info in it) so that the job info will be picked
         * up in subsequent pidmaps or other daemons won't
         * know how to route
         */
        jdata->map = OBJ_NEW(orte_job_map_t);

        /* setup an app_context for the singleton */
        app = OBJ_NEW(orte_app_context_t);
        app->app = strdup("singleton");
        app->num_procs = 1;
        opal_pointer_array_add(jdata->apps, app);
        jdata->num_apps = 1;

        /* setup a proc object for the singleton - since we
         * -must- be the HNP, and therefore we stored our
         * node on the global node pool, and since the singleton
         * -must- be on the same node as us, indicate that
         */
        proc = OBJ_NEW(orte_proc_t);
        proc->name.jobid = jdata->jobid;
        proc->name.vpid = 0;
        proc->parent = 0;
        ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_ALIVE);
        proc->state = ORTE_PROC_STATE_RUNNING;
        proc->app_idx = 0;
        /* obviously, it is on my node */
        node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
        proc->node = node;
        OBJ_RETAIN(node);  /* keep accounting straight */
        opal_pointer_array_add(jdata->procs, proc);
        jdata->num_procs = 1;
        /* add the node to the job map */
        OBJ_RETAIN(node);
        opal_pointer_array_add(jdata->map->nodes, node);
        jdata->map->num_nodes++;
        /* and it obviously is on the node */
        OBJ_RETAIN(proc);
        opal_pointer_array_add(node->procs, proc);
        node->num_procs++;
        /* and obviously it is one of my local procs */
        OBJ_RETAIN(proc);
        opal_pointer_array_add(orte_local_children, proc);
        jdata->num_local_procs = 1;
        /* set the trivial */
        proc->local_rank = 0;
        proc->node_rank = 0;
        proc->app_rank = 0;
        proc->state = ORTE_PROC_STATE_RUNNING;
        proc->app_idx = 0;
        ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_LOCAL);

        /* set the ORTE_JOB_TRANSPORT_KEY from the environment */
        orte_pre_condition_transports(jdata, NULL);

        /* register the singleton's nspace with our PMIx server */
        if (ORTE_SUCCESS != (ret = orte_pmix_server_register_nspace(jdata, false))) {
          ORTE_ERROR_LOG(ret);
          goto DONE;
        }
        /* use setup fork to create the envars needed by the singleton */
        if (OPAL_SUCCESS != (ret = opal_pmix.server_setup_fork(&proc->name, &singenv))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }

        /* append the transport key to the envars needed by the singleton */
        if (!orte_get_attribute(&jdata->attributes, ORTE_JOB_TRANSPORT_KEY, (void**)&string_key, OPAL_STRING) || NULL == string_key) {
            ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
            goto DONE;
        }
        asprintf(&env_str, OPAL_MCA_PREFIX"orte_precondition_transports=%s", string_key);
        opal_argv_append_nosize(&singenv, env_str);
        free(env_str);

        nptr = opal_argv_join(singenv, '*');
        opal_argv_free(singenv);

        /* create a string that contains our uri + sysinfo + PMIx server URI envars */
        orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
        asprintf(&tmp, "%s[%s]%s", orte_process_info.my_daemon_uri, sysinfo, nptr);
        free(sysinfo);
        free(nptr);

        /* pass that info to the singleton */
        if (OPAL_SUCCESS != (ret = opal_fd_write(orted_globals.uri_pipe, strlen(tmp)+1, tmp))) { ; /* need to add 1 to get the NULL */
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }

        /* cleanup */
        free(tmp);
        close(orted_globals.uri_pipe);

        /* since a singleton spawned us, we need to harvest
         * any MCA params from the local environment so
         * we can pass them along to any subsequent daemons
         * we may start as the result of a comm_spawn
         */
        for (i=0; NULL != environ[i]; i++) {
            if (0 == strncmp(environ[i], OPAL_MCA_PREFIX, 9)) {
                /* make a copy to manipulate */
                tmp = strdup(environ[i]);
                /* find the equal sign */
                nptr = strchr(tmp, '=');
                *nptr = '\0';
                nptr++;
                /* add the mca param to the orted cmd line */
                opal_argv_append_nosize(&orted_cmd_line, "-"OPAL_MCA_CMD_LINE_ID);
                opal_argv_append_nosize(&orted_cmd_line, &tmp[9]);
                opal_argv_append_nosize(&orted_cmd_line, nptr);
                free(tmp);
            }
        }
    }

    /* if we were given a pipe to monitor for singleton termination, set that up */
    if (orted_globals.singleton_died_pipe > 0) {
        /* register shutdown handler */
        pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
        opal_event_set(orte_event_base, pipe_handler,
                       orted_globals.singleton_died_pipe,
                       OPAL_EV_READ,
                       pipe_closed,
                       pipe_handler);
        opal_event_add(pipe_handler, NULL);
    }

    /* If I have a parent, then save his contact info so
     * any messages we send can flow thru him.
     */
    orte_parent_uri = NULL;
    (void) mca_base_var_register ("orte", "orte", NULL, "parent_uri",
                                  "URI for the parent if tree launch is enabled.",
                                  MCA_BASE_VAR_TYPE_STRING, NULL, 0,
                                  MCA_BASE_VAR_FLAG_INTERNAL,
                                  OPAL_INFO_LVL_9,
                                  MCA_BASE_VAR_SCOPE_CONSTANT,
                                  &orte_parent_uri);
    if (NULL != orte_parent_uri) {
        orte_process_name_t parent;
        opal_value_t val;

        /* set the contact info into our local database */
        ret = orte_rml_base_parse_uris(orte_parent_uri, &parent, NULL);
        if (ORTE_SUCCESS != ret) {
            ORTE_ERROR_LOG(ret);
            free (orte_parent_uri);
            orte_parent_uri = NULL;
            goto DONE;
        }
        OBJ_CONSTRUCT(&val, opal_value_t);
        val.key = OPAL_PMIX_PROC_URI;
        val.type = OPAL_STRING;
        val.data.string = orte_parent_uri;
        if (OPAL_SUCCESS != (ret = opal_pmix.store_local(&parent, &val))) {
            ORTE_ERROR_LOG(ret);
            OBJ_DESTRUCT(&val);
            goto DONE;
        }
        val.key = NULL;
        val.data.string = NULL;
        OBJ_DESTRUCT(&val);

        /* don't need this value anymore */
        free(orte_parent_uri);
        orte_parent_uri = NULL;

        /* tell the routed module that we have a path
         * back to the HNP
         */
        if (ORTE_SUCCESS != (ret = orte_routed.update_route(NULL, ORTE_PROC_MY_HNP, &parent))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
        /* set the lifeline to point to our parent so that we
         * can handle the situation if that lifeline goes away
         */
        if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(NULL, &parent))) {
            ORTE_ERROR_LOG(ret);
            goto DONE;
        }
    }

    /* if we are not the HNP...the only time we will be an HNP
     * is if we are launched by a singleton to provide support
     * for it
     */
    if (!ORTE_PROC_IS_HNP) {
        orte_process_name_t target;
        target.jobid = ORTE_PROC_MY_NAME->jobid;

        if (orte_fwd_mpirun_port || orte_static_ports) {
            /* setup the rollup callback */
            orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_ORTED_CALLBACK,
                                    ORTE_RML_PERSISTENT, rollup, NULL);
            target.vpid = ORTE_PROC_MY_NAME->vpid;
            /* since we will be waiting for any children to send us
             * their rollup info before sending to our parent, save
             * a little time in the launch phase by "warming up" the
             * connection to our parent while we wait for our children */
            buffer = OBJ_NEW(opal_buffer_t);  // zero-byte message
            if (0 > (ret = orte_rml.send_buffer_nb(orte_mgmt_conduit,
                                                   ORTE_PROC_MY_PARENT, buffer,
                                                   ORTE_RML_TAG_WARMUP_CONNECTION,
                                                   orte_rml_send_callback, NULL))) {
                ORTE_ERROR_LOG(ret);
                OBJ_RELEASE(buffer);
                goto DONE;
            }
        } else {
            target.vpid = 0;
        }

        /* send the information to the orted report-back point - this function
         * will process the data, but also counts the number of
         * orteds that reported back so the launch procedure can continue.
         * We need to do this at the last possible second as the HNP
         * can turn right around and begin issuing orders to us
         */

        buffer = OBJ_NEW(opal_buffer_t);
        /* insert our name for rollup purposes */
        if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
            ORTE_ERROR_LOG(ret);
            OBJ_RELEASE(buffer);
            goto DONE;
        }

        /* get any connection info we may have pushed */
        {
            opal_value_t *val = NULL, *kv;
            opal_list_t *modex;
            int32_t flag;

            if (OPAL_SUCCESS != (ret = opal_pmix.get(ORTE_PROC_MY_NAME, NULL, NULL, &val)) || NULL == val) {
                /* just pack a marker indicating we don't have any to share */
                flag = 0;
                if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &flag, 1, OPAL_INT32))) {
                    ORTE_ERROR_LOG(ret);
                    OBJ_RELEASE(buffer);
                    goto DONE;
                }
            } else {
                /* the data is returned as a list of key-value pairs in the opal_value_t */
                if (OPAL_PTR == val->type) {
                    modex = (opal_list_t*)val->data.ptr;
                    flag = (int32_t)opal_list_get_size(modex);
                    if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &flag, 1, OPAL_INT32))) {
                        ORTE_ERROR_LOG(ret);
                        OBJ_RELEASE(buffer);
                        goto DONE;
                    }
                    OPAL_LIST_FOREACH(kv, modex, opal_value_t) {
                        if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &kv, 1, OPAL_VALUE))) {
                            ORTE_ERROR_LOG(ret);
                            OBJ_RELEASE(buffer);
                            goto DONE;
                        }
                    }
                    OPAL_LIST_RELEASE(modex);
                } else {
                    opal_output(0, "VAL KEY: %s", (NULL == val->key) ? "NULL" : val->key);
                    /* single value */
                    flag = 1;
                    if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &flag, 1, OPAL_INT32))) {
                        ORTE_ERROR_LOG(ret);
                        OBJ_RELEASE(buffer);
                        goto DONE;
                    }
                    if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &val, 1, OPAL_VALUE))) {
                        ORTE_ERROR_LOG(ret);
                        OBJ_RELEASE(buffer);
                        goto DONE;
                    }
                }
                OBJ_RELEASE(val);
            }