static int do_child(orte_app_context_t* context,
orte_proc_t *child,
char **environ_copy,
orte_job_t *jobdat, int write_fd,
orte_iof_base_io_conf_t opts)
{
int i, rc;
sigset_t sigs;
long fd, fdmax = sysconf(_SC_OPEN_MAX);
char *param, *msg;
if (orte_forward_job_control) {
/* Set a new process group for this child, so that a
SIGSTOP can be sent to it without being sent to the
orted. */
setpgid(0, 0);
}
/* Setup the pipe to be close-on-exec */
opal_fd_set_cloexec(write_fd);
if (NULL != child) {
/* setup stdout/stderr so that any error messages that we
may print out will get displayed back at orterun.
NOTE: Definitely do this AFTER we check contexts so
that any error message from those two functions doesn't
come out to the user. IF we didn't do it in this order,
THEN a user who gives us a bad executable name or
working directory would get N error messages, where
N=num_procs. This would be very annoying for large
jobs, so instead we set things up so that orterun
always outputs a nice, single message indicating what
happened
*/
if (ORTE_SUCCESS != (i = orte_iof_base_setup_child(&opts,
&environ_copy))) {
ORTE_ERROR_LOG(i);
send_error_show_help(write_fd, 1,
"help-orte-odls-default.txt",
"iof setup failed",
orte_process_info.nodename, context->app);
/* Does not return */
}
/* now set any child-level controls such as binding */
orte_rtc.set(jobdat, child, &environ_copy, write_fd);
} else if (!ORTE_FLAG_TEST(jobdat, ORTE_JOB_FLAG_FORWARD_OUTPUT)) {
/* tie stdin/out/err/internal to /dev/null */
int fdnull;
for (i=0; i < 3; i++) {
fdnull = open("/dev/null", O_RDONLY, 0);
if (fdnull > i && i != write_fd) {
dup2(fdnull, i);
}
close(fdnull);
}
fdnull = open("/dev/null", O_RDONLY, 0);
if (fdnull > opts.p_internal[1]) {
dup2(fdnull, opts.p_internal[1]);
}
close(fdnull);
}
/* if the user requested it, set the system resource limits */
if (OPAL_SUCCESS != (rc = opal_util_init_sys_limits(&msg))) {
send_error_show_help(write_fd, 1, "help-orte-odls-default.txt",
"set limit",
orte_process_info.nodename, context->app,
__FILE__, __LINE__, msg);
}
/* ensure we only do this once */
(void) mca_base_var_env_name("opal_set_max_sys_limits", ¶m);
opal_unsetenv(param, &environ_copy);
free(param);
/* close all file descriptors w/ exception of stdin/stdout/stderr,
the pipe used for the IOF INTERNAL messages, and the pipe up to
the parent. */
for(fd=3; fd<fdmax; fd++) {
if (fd != opts.p_internal[1] && fd != write_fd) {
close(fd);
}
}
if (context->argv == NULL) {
context->argv = malloc(sizeof(char*)*2);
context->argv[0] = strdup(context->app);
context->argv[1] = NULL;
}
/* Set signal handlers back to the default. Do this close to
the exev() because the event library may (and likely will)
reset them. If we don't do this, the event library may
have left some set that, at least on some OS's, don't get
reset via fork() or exec(). Hence, the launched process
could be unkillable (for example). */
set_handler_default(SIGTERM);
set_handler_default(SIGINT);
set_handler_default(SIGHUP);
set_handler_default(SIGPIPE);
set_handler_default(SIGCHLD);
/* Unblock all signals, for many of the same reasons that we
set the default handlers, above. This is noticable on
Linux where the event library blocks SIGTERM, but we don't
want that blocked by the launched process. */
sigprocmask(0, 0, &sigs);
sigprocmask(SIG_UNBLOCK, &sigs, 0);
/* Exec the new executable */
if (10 < opal_output_get_verbosity(orte_odls_base_framework.framework_output)) {
int jout;
opal_output(0, "%s STARTING %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), context->app);
for (jout=0; NULL != context->argv[jout]; jout++) {
opal_output(0, "%s\tARGV[%d]: %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), jout, context->argv[jout]);
}
for (jout=0; NULL != environ_copy[jout]; jout++) {
opal_output(0, "%s\tENVIRON[%d]: %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), jout, environ_copy[jout]);
}
}
execve(context->app, context->argv, environ_copy);
send_error_show_help(write_fd, 1,
"help-orte-odls-default.txt", "execve error",
orte_process_info.nodename, context->app, strerror(errno));
/* Does not return */
}
static int rte_init(void)
{
int ret;
char *error = NULL;
char *contact_path, *jobfam_dir;
orte_job_t *jdata;
orte_node_t *node;
orte_proc_t *proc;
orte_app_context_t *app;
char **aliases, *aptr;
/* run the prolog */
if (ORTE_SUCCESS != (ret = orte_ess_base_std_prolog())) {
error = "orte_ess_base_std_prolog";
goto error;
}
/* setup callback for SIGPIPE */
setup_sighandler(SIGPIPE, &epipe_handler, epipe_signal_callback);
/** setup callbacks for abort signals - from this point
* forward, we need to abort in a manner that allows us
* to cleanup. However, we cannot directly use libevent
* to trap these signals as otherwise we cannot respond
* to them if we are stuck in an event! So instead use
* the basic POSIX trap functions to handle the signal,
* and then let that signal handler do some magic to
* avoid the hang
*
* NOTE: posix traps don't allow us to do anything major
* in them, so use a pipe tied to a libevent event to
* reach a "safe" place where the termination event can
* be created
*/
pipe(term_pipe);
/* setup an event to attempt normal termination on signal */
opal_event_set(orte_event_base, &term_handler, term_pipe[0], OPAL_EV_READ, clean_abort, NULL);
opal_event_set_priority(&term_handler, ORTE_ERROR_PRI);
opal_event_add(&term_handler, NULL);
/* Set both ends of this pipe to be close-on-exec so that no
children inherit it */
if (opal_fd_set_cloexec(term_pipe[0]) != OPAL_SUCCESS ||
opal_fd_set_cloexec(term_pipe[1]) != OPAL_SUCCESS) {
error = "unable to set the pipe to CLOEXEC";
goto error;
}
/* point the signal trap to a function that will activate that event */
signal(SIGTERM, abort_signal_callback);
signal(SIGINT, abort_signal_callback);
signal(SIGHUP, abort_signal_callback);
/** setup callbacks for signals we should foward */
setup_sighandler(SIGUSR1, &sigusr1_handler, signal_forward_callback);
setup_sighandler(SIGUSR2, &sigusr2_handler, signal_forward_callback);
setup_sighandler(SIGTSTP, &sigtstp_handler, signal_forward_callback);
setup_sighandler(SIGCONT, &sigcont_handler, signal_forward_callback);
signals_set = true;
#if OPAL_HAVE_HWLOC
{
hwloc_obj_t obj;
unsigned i, j;
/* get the local topology */
if (NULL == opal_hwloc_topology) {
if (OPAL_SUCCESS != opal_hwloc_base_get_topology()) {
error = "topology discovery";
goto error;
}
}
/* remove the hostname from the topology. Unfortunately, hwloc
* decided to add the source hostname to the "topology", thus
* rendering it unusable as a pure topological description. So
* we remove that information here.
*/
obj = hwloc_get_root_obj(opal_hwloc_topology);
for (i=0; i < obj->infos_count; i++) {
if (NULL == obj->infos[i].name ||
NULL == obj->infos[i].value) {
continue;
}
if (0 == strncmp(obj->infos[i].name, "HostName", strlen("HostName"))) {
free(obj->infos[i].name);
free(obj->infos[i].value);
/* left justify the array */
for (j=i; j < obj->infos_count-1; j++) {
obj->infos[j] = obj->infos[j+1];
}
obj->infos[obj->infos_count-1].name = NULL;
obj->infos[obj->infos_count-1].value = NULL;
obj->infos_count--;
break;
}
}
if (4 < opal_output_get_verbosity(orte_ess_base_framework.framework_output)) {
opal_output(0, "%s Topology Info:", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
opal_dss.dump(0, opal_hwloc_topology, OPAL_HWLOC_TOPO);
}
}
#endif
/* if we are using xml for output, put an mpirun start tag */
if (orte_xml_output) {
fprintf(orte_xml_fp, "<mpirun>\n");
fflush(orte_xml_fp);
}
/* open and setup the opal_pstat framework so we can provide
* process stats if requested
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_pstat_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_pstat_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_pstat_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_pstat_base_select";
goto error;
}
/* open and setup the state machine */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_state_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_state_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_state_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_state_base_select";
goto error;
}
/* open the errmgr */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_errmgr_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_errmgr_base_open";
goto error;
}
/* Since we are the HNP, then responsibility for
* defining the name falls to the PLM component for our
* respective environment - hence, we have to open the PLM
* first and select that component.
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_plm_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_plm_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_base_select";
goto error;
}
/* if we were spawned by a singleton, our jobid was given to us */
if (NULL != orte_ess_base_jobid) {
if (ORTE_SUCCESS != (ret = orte_util_convert_string_to_jobid(&ORTE_PROC_MY_NAME->jobid, orte_ess_base_jobid))) {
ORTE_ERROR_LOG(ret);
error = "convert_string_to_jobid";
goto error;
}
ORTE_PROC_MY_NAME->vpid = 0;
} else {
if (ORTE_SUCCESS != (ret = orte_plm.set_hnp_name())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_set_hnp_name";
goto error;
}
}
/* Setup the communication infrastructure */
/*
* OOB Layer
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_oob_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_oob_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_oob_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_oob_base_select";
goto error;
}
/*
* Runtime Messaging Layer
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rml_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_select";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_errmgr_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_errmgr_base_select";
goto error;
}
/* setup the global job and node arrays */
orte_job_data = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_job_data,
1,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
1))) {
ORTE_ERROR_LOG(ret);
error = "setup job array";
goto error;
}
orte_node_pool = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_pool,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node array";
goto error;
}
orte_node_topologies = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_topologies,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node topologies array";
goto error;
}
/* init the nidmap - just so we register that verbosity */
orte_util_nidmap_init(NULL);
/* Setup the job data object for the daemons */
/* create and store the job data object */
jdata = OBJ_NEW(orte_job_t);
jdata->jobid = ORTE_PROC_MY_NAME->jobid;
opal_pointer_array_set_item(orte_job_data, 0, jdata);
/* mark that the daemons have reported as we are the
* only ones in the system right now, and we definitely
* are running!
*/
jdata->state = ORTE_JOB_STATE_DAEMONS_REPORTED;
/* every job requires at least one app */
app = OBJ_NEW(orte_app_context_t);
opal_pointer_array_set_item(jdata->apps, 0, app);
jdata->num_apps++;
/* create and store a node object where we are */
node = OBJ_NEW(orte_node_t);
node->name = strdup(orte_process_info.nodename);
node->index = opal_pointer_array_set_item(orte_node_pool, 0, node);
#if OPAL_HAVE_HWLOC
/* add it to the array of known topologies */
opal_pointer_array_add(orte_node_topologies, opal_hwloc_topology);
#endif
/* create and store a proc object for us */
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = ORTE_PROC_MY_NAME->jobid;
proc->name.vpid = ORTE_PROC_MY_NAME->vpid;
proc->pid = orte_process_info.pid;
proc->rml_uri = orte_rml.get_contact_info();
proc->state = ORTE_PROC_STATE_RUNNING;
OBJ_RETAIN(node); /* keep accounting straight */
proc->node = node;
opal_pointer_array_set_item(jdata->procs, proc->name.vpid, proc);
/* record that the daemon (i.e., us) is on this node
* NOTE: we do not add the proc object to the node's
* proc array because we are not an application proc.
* Instead, we record it in the daemon field of the
* node object
*/
OBJ_RETAIN(proc); /* keep accounting straight */
node->daemon = proc;
ORTE_FLAG_SET(node, ORTE_NODE_FLAG_DAEMON_LAUNCHED);
node->state = ORTE_NODE_STATE_UP;
/* if we are to retain aliases, get ours */
if (orte_retain_aliases) {
aliases = NULL;
opal_ifgetaliases(&aliases);
/* add our own local name to it */
opal_argv_append_nosize(&aliases, orte_process_info.nodename);
aptr = opal_argv_join(aliases, ',');
opal_argv_free(aliases);
orte_set_attribute(&node->attributes, ORTE_NODE_ALIAS, ORTE_ATTR_LOCAL, aptr, OPAL_STRING);
free(aptr);
}
/* record that the daemon job is running */
jdata->num_procs = 1;
jdata->state = ORTE_JOB_STATE_RUNNING;
/* obviously, we have "reported" */
jdata->num_reported = 1;
/*
* Routed system
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_routed_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_routed_base_select";
goto error;
}
/* datastore - ensure we don't pickup the pmi component, but
* don't override anything set by user
*/
if (NULL == getenv("OMPI_MCA_dstore")) {
putenv("OMPI_MCA_dstore=^pmi");
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_dstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_dstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_select";
goto error;
}
/* create the handles */
if (0 > (opal_dstore_peer = opal_dstore.open("PEER"))) {
error = "opal dstore global";
ret = ORTE_ERR_FATAL;
goto error;
}
if (0 > (opal_dstore_internal = opal_dstore.open("INTERNAL"))) {
error = "opal dstore internal";
ret = ORTE_ERR_FATAL;
goto error;
}
if (0 > (opal_dstore_nonpeer = opal_dstore.open("NONPEER"))) {
error = "opal dstore nonpeer";
ret = ORTE_ERR_FATAL;
goto error;
}
/*
* Group communications
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_grpcomm_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_grpcomm_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_select";
goto error;
}
/* Now provide a chance for the PLM
* to perform any module-specific init functions. This
* needs to occur AFTER the communications are setup
* as it may involve starting a non-blocking recv
*/
if (ORTE_SUCCESS != (ret = orte_plm.init())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_init";
goto error;
}
/*
* Setup the remaining resource
* management and errmgr frameworks - application procs
* and daemons do not open these frameworks as they only use
* the hnp proxy support in the PLM framework.
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_ras_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_ras_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_ras_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_ras_base_find_available";
goto error;
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rmaps_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rmaps_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rmaps_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rmaps_base_find_available";
goto error;
}
#if OPAL_HAVE_HWLOC
{
char *coprocessors, **sns;
uint32_t h;
int idx;
/* if a topology file was given, then the rmaps framework open
* will have reset our topology. Ensure we always get the right
* one by setting our node topology afterwards
*/
node->topology = opal_hwloc_topology;
/* init the hash table, if necessary */
if (NULL == orte_coprocessors) {
orte_coprocessors = OBJ_NEW(opal_hash_table_t);
opal_hash_table_init(orte_coprocessors, orte_process_info.num_procs);
}
/* detect and add any coprocessors */
coprocessors = opal_hwloc_base_find_coprocessors(opal_hwloc_topology);
if (NULL != coprocessors) {
/* separate the serial numbers of the coprocessors
* on this host
*/
sns = opal_argv_split(coprocessors, ',');
for (idx=0; NULL != sns[idx]; idx++) {
/* compute the hash */
OPAL_HASH_STR(sns[idx], h);
/* mark that this coprocessor is hosted by this node */
opal_hash_table_set_value_uint32(orte_coprocessors, h, (void*)&(ORTE_PROC_MY_NAME->vpid));
}
opal_argv_free(sns);
free(coprocessors);
orte_coprocessors_detected = true;
}
/* see if I am on a coprocessor */
coprocessors = opal_hwloc_base_check_on_coprocessor();
if (NULL != coprocessors) {
orte_set_attribute(&node->attributes, ORTE_NODE_SERIAL_NUMBER, ORTE_ATTR_LOCAL, coprocessors, OPAL_STRING);
free(coprocessors);
orte_coprocessors_detected = true;
}
}
#endif
/* Open/select the odls */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_odls_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_odls_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_select";
goto error;
}
/* Open/select the rtc */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rtc_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rtc_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rtc_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rtc_base_select";
goto error;
}
/* enable communication with the rml */
if (ORTE_SUCCESS != (ret = orte_rml.enable_comm())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml.enable_comm";
goto error;
}
/* we are an hnp, so update the contact info field for later use */
orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
proc->rml_uri = strdup(orte_process_info.my_hnp_uri);
/* we are also officially a daemon, so better update that field too */
orte_process_info.my_daemon_uri = strdup(orte_process_info.my_hnp_uri);
/* setup the orte_show_help system to recv remote output */
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_SHOW_HELP,
ORTE_RML_PERSISTENT, orte_show_help_recv, NULL);
/* setup my session directory */
if (orte_create_session_dirs) {
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s setting up session dir with\n\ttmpdir: %s\n\thost %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
(NULL == orte_process_info.tmpdir_base) ? "UNDEF" : orte_process_info.tmpdir_base,
orte_process_info.nodename));
/* take a pass thru the session directory code to fillin the
* tmpdir names - don't create anything yet
*/
if (ORTE_SUCCESS != (ret = orte_session_dir(false,
orte_process_info.tmpdir_base,
orte_process_info.nodename, NULL,
ORTE_PROC_MY_NAME))) {
ORTE_ERROR_LOG(ret);
error = "orte_session_dir define";
goto error;
}
/* clear the session directory just in case there are
* stale directories laying around
*/
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
/* now actually create the directory tree */
if (ORTE_SUCCESS != (ret = orte_session_dir(true,
orte_process_info.tmpdir_base,
orte_process_info.nodename, NULL,
ORTE_PROC_MY_NAME))) {
ORTE_ERROR_LOG(ret);
error = "orte_session_dir";
goto error;
}
/* Once the session directory location has been established, set
the opal_output hnp file location to be in the
proc-specific session directory. */
opal_output_set_output_file_info(orte_process_info.proc_session_dir,
"output-", NULL, NULL);
/* save my contact info in a file for others to find */
jobfam_dir = opal_dirname(orte_process_info.job_session_dir);
contact_path = opal_os_path(false, jobfam_dir, "contact.txt", NULL);
free(jobfam_dir);
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s writing contact file %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
contact_path));
if (ORTE_SUCCESS != (ret = orte_write_hnp_contact_file(contact_path))) {
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s writing contact file failed with error %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_ERROR_NAME(ret)));
} else {
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s wrote contact file",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
}
free(contact_path);
}
/* setup the routed info - the selected routed component
* will know what to do.
*/
if (ORTE_SUCCESS != (ret = orte_routed.init_routes(ORTE_PROC_MY_NAME->jobid, NULL))) {
ORTE_ERROR_LOG(ret);
error = "orte_routed.init_routes";
goto error;
}
/* setup I/O forwarding system - must come after we init routes */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_iof_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_iof_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_iof_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_iof_base_select";
goto error;
}
/* setup the FileM */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_filem_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_filem_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_select";
goto error;
}
#if OPAL_ENABLE_FT_CR == 1
/*
* Setup the SnapC
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_snapc_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_snapc_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_sstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_sstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_snapc_base_select(ORTE_PROC_IS_HNP, ORTE_PROC_IS_APP))) {
ORTE_ERROR_LOG(ret);
error = "orte_snapc_base_select";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_sstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_sstore_base_select";
goto error;
}
/* For HNP, ORTE doesn't need the OPAL CR stuff */
opal_cr_set_enabled(false);
#else
opal_cr_set_enabled(false);
#endif
/*
* Initalize the CR setup
* Note: Always do this, even in non-FT builds.
* If we don't some user level tools may hang.
*/
if (ORTE_SUCCESS != (ret = orte_cr_init())) {
ORTE_ERROR_LOG(ret);
error = "orte_cr_init";
goto error;
}
/* setup the dfs framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_dfs_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_dfs_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_select";
goto error;
}
/* if a tool has launched us and is requesting event reports,
* then set its contact info into the comm system
*/
if (orte_report_events) {
if (ORTE_SUCCESS != (ret = orte_util_comm_connect_tool(orte_report_events_uri))) {
error = "could not connect to tool";
goto error;
}
}
/* We actually do *not* want an HNP to voluntarily yield() the
processor more than necessary. Orterun already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at orterun, we want the
OS to wake us up in a timely fashion (which most OS's
seem good about doing) and then we want orterun to process
the message as fast as possible. If orterun yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules orterun to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
require OOB messages for wireup, etc.). */
opal_progress_set_yield_when_idle(false);
return ORTE_SUCCESS;
error:
if (ORTE_ERR_SILENT != ret && !orte_report_silent_errors) {
orte_show_help("help-orte-runtime.txt",
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
}
return ORTE_ERR_SILENT;
}
static int init(void)
{
#if HWLOC_API_VERSION >= 0x20000
int rc;
bool space_available = false;
uint64_t amount_space_avail = 0;
/* ensure we have the topology */
if (OPAL_SUCCESS != (rc = opal_hwloc_base_get_topology())) {
return rc;
}
if (VM_HOLE_NONE == mca_rtc_hwloc_component.kind) {
return ORTE_SUCCESS;
}
/* get the size of the topology shared memory segment */
if (0 != hwloc_shmem_topology_get_length(opal_hwloc_topology, &shmemsize, 0)) {
opal_output_verbose(2, orte_rtc_base_framework.framework_output,
"%s hwloc topology shmem not available",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
return ORTE_SUCCESS;
}
if (ORTE_SUCCESS != (rc = find_hole(mca_rtc_hwloc_component.kind,
&shmemaddr, shmemsize))) {
/* we couldn't find a hole, so don't use the shmem support */
if (4 < opal_output_get_verbosity(orte_rtc_base_framework.framework_output)) {
FILE *file = fopen("/proc/self/maps", "r");
if (file) {
char line[256];
opal_output(0, "%s Dumping /proc/self/maps",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
while (fgets(line, sizeof(line), file) != NULL) {
char *end = strchr(line, '\n');
if (end) {
*end = '\0';
}
opal_output(0, "%s", line);
}
fclose(file);
}
}
return ORTE_SUCCESS;
}
/* create the shmem file in our session dir so it
* will automatically get cleaned up */
asprintf(&shmemfile, "%s/hwloc.sm", orte_process_info.jobfam_session_dir);
/* let's make sure we have enough space for the backing file */
if (OPAL_SUCCESS != (rc = enough_space(shmemfile, shmemsize,
&amount_space_avail,
&space_available))) {
opal_output_verbose(2, orte_rtc_base_framework.framework_output,
"%s an error occurred while determining "
"whether or not %s could be created for topo shmem.",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), shmemfile);
free(shmemfile);
shmemfile = NULL;
return ORTE_SUCCESS;
}
if (!space_available) {
if (1 < opal_output_get_verbosity(orte_rtc_base_framework.framework_output)) {
orte_show_help("help-orte-rtc-hwloc.txt", "target full", true,
shmemfile, orte_process_info.nodename,
(unsigned long)shmemsize,
(unsigned long long)amount_space_avail);
}
free(shmemfile);
shmemfile = NULL;
return ORTE_SUCCESS;
}
/* enough space is available, so create the segment */
if (-1 == (shmemfd = open(shmemfile, O_CREAT | O_RDWR, 0600))) {
int err = errno;
if (1 < opal_output_get_verbosity(orte_rtc_base_framework.framework_output)) {
orte_show_help("help-orte-rtc-hwloc.txt", "sys call fail", true,
orte_process_info.nodename,
"open(2)", "", strerror(err), err);
}
free(shmemfile);
shmemfile = NULL;
return ORTE_SUCCESS;
}
/* ensure nobody inherits this fd */
opal_fd_set_cloexec(shmemfd);
/* populate the shmem segment with the topology */
if (0 != (rc = hwloc_shmem_topology_write(opal_hwloc_topology, shmemfd, 0,
(void*)shmemaddr, shmemsize, 0))) {
opal_output_verbose(2, orte_rtc_base_framework.framework_output,
"%s an error occurred while writing topology to %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), shmemfile);
unlink(shmemfile);
free(shmemfile);
shmemfile = NULL;
close(shmemfd);
shmemfd = -1;
return ORTE_SUCCESS;
}
#endif
return ORTE_SUCCESS;
}
static int do_child(orte_odls_spawn_caddy_t *cd, int write_fd)
{
int i;
sigset_t sigs;
/* Setup the pipe to be close-on-exec */
opal_fd_set_cloexec(write_fd);
if (NULL != cd->child) {
/* setup stdout/stderr so that any error messages that we
may print out will get displayed back at orterun.
NOTE: Definitely do this AFTER we check contexts so
that any error message from those two functions doesn't
come out to the user. IF we didn't do it in this order,
THEN a user who gives us a bad executable name or
working directory would get N error messages, where
N=num_procs. This would be very annoying for large
jobs, so instead we set things up so that orterun
always outputs a nice, single message indicating what
happened
*/
if (ORTE_SUCCESS != (i = orte_iof_base_setup_child(&cd->opts, &cd->env))) {
ORTE_ERROR_LOG(i);
send_error_show_help(write_fd, 1,
"help-orte-odls-alps.txt",
"iof setup failed",
orte_process_info.nodename, cd->app->app);
/* Does not return */
}
/* now set any child-level controls such as binding */
orte_rtc.set(cd->jdata, cd->child, &cd->env, write_fd);
} else if (!ORTE_FLAG_TEST(cd->jdata, ORTE_JOB_FLAG_FORWARD_OUTPUT)) {
/* tie stdin/out/err/internal to /dev/null */
int fdnull;
for (i=0; i < 3; i++) {
fdnull = open("/dev/null", O_RDONLY, 0);
if (fdnull > i && i != write_fd) {
dup2(fdnull, i);
}
close(fdnull);
}
fdnull = open("/dev/null", O_RDONLY, 0);
if (fdnull > cd->opts.p_internal[1]) {
dup2(fdnull, cd->opts.p_internal[1]);
}
close(fdnull);
}
if (ORTE_SUCCESS != close_open_file_descriptors(write_fd, cd->opts)) {
send_error_show_help(write_fd, 1, "help-orte-odls-alps.txt",
"close fds",
orte_process_info.nodename, cd->app->app,
__FILE__, __LINE__);
}
if (cd->argv == NULL) {
cd->argv = malloc(sizeof(char*)*2);
cd->argv[0] = strdup(cd->app->app);
cd->argv[1] = NULL;
}
/* Set signal handlers back to the default. Do this close to
the exev() because the event library may (and likely will)
reset them. If we don't do this, the event library may
have left some set that, at least on some OS's, don't get
reset via fork() or exec(). Hence, the launched process
could be unkillable (for example). */
set_handler_alps(SIGTERM);
set_handler_alps(SIGINT);
set_handler_alps(SIGHUP);
set_handler_alps(SIGPIPE);
set_handler_alps(SIGCHLD);
/* Unblock all signals, for many of the same reasons that we
set the default handlers, above. This is noticable on
Linux where the event library blocks SIGTERM, but we don't
want that blocked by the launched process. */
sigprocmask(0, 0, &sigs);
sigprocmask(SIG_UNBLOCK, &sigs, 0);
/* Exec the new executable */
if (10 < opal_output_get_verbosity(orte_odls_base_framework.framework_output)) {
int jout;
opal_output(0, "%s STARTING %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), cd->app->app);
for (jout=0; NULL != cd->argv[jout]; jout++) {
opal_output(0, "%s\tARGV[%d]: %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), jout, cd->argv[jout]);
}
for (jout=0; NULL != cd->env[jout]; jout++) {
opal_output(0, "%s\tENVIRON[%d]: %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), jout, cd->env[jout]);
}
}
execve(cd->app->app, cd->argv, cd->env);
send_error_show_help(write_fd, 1,
"help-orte-odls-alps.txt", "execve error",
orte_process_info.nodename, cd->app->app, strerror(errno));
/* Does not return */
}