/**********************************************************************
The plock must be held before calling this function.
**********************************************************************/
static void pi_rcv_process_switch_ext_port(IN osm_sm_t * sm,
IN osm_node_t * p_node,
IN osm_physp_t * p_physp,
IN ib_port_info_t * p_pi)
{
ib_api_status_t status = IB_SUCCESS;
osm_madw_context_t context;
osm_physp_t *p_remote_physp, *physp0;
osm_node_t *p_remote_node;
ib_net64_t m_key;
unsigned data_vls;
uint8_t port_num;
uint8_t remote_port_num;
osm_dr_path_t path;
int mlnx_epi_supported = 0;
OSM_LOG_ENTER(sm->p_log);
/*
Check the state of the physical port.
If there appears to be something on the other end of the wire,
then ask for NodeInfo. Ignore the switch management port.
*/
port_num = osm_physp_get_port_num(p_physp);
if (sm->p_subn->opt.fdr10)
mlnx_epi_supported = is_mlnx_ext_port_info_supported(
ib_node_info_get_vendor_id(&p_node->node_info),
p_node->node_info.device_id);
/* if in_sweep_hop_0 is TRUE, then this means the SM is on the switch,
and we got switchInfo of our local switch. Do not continue
probing through the switch. */
switch (ib_port_info_get_port_state(p_pi)) {
case IB_LINK_DOWN:
p_remote_physp = osm_physp_get_remote(p_physp);
if (p_remote_physp) {
p_remote_node =
osm_physp_get_node_ptr(p_remote_physp);
remote_port_num =
osm_physp_get_port_num(p_remote_physp);
OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
"Unlinking local node 0x%" PRIx64
", port %u"
"\n\t\t\t\tand remote node 0x%" PRIx64
", port %u\n",
cl_ntoh64(osm_node_get_node_guid
(p_node)), port_num,
cl_ntoh64(osm_node_get_node_guid
(p_remote_node)),
remote_port_num);
if (sm->ucast_mgr.cache_valid)
osm_ucast_cache_add_link(&sm->ucast_mgr,
p_physp,
p_remote_physp);
osm_node_unlink(p_node, (uint8_t) port_num,
p_remote_node,
(uint8_t) remote_port_num);
}
break;
case IB_LINK_INIT:
case IB_LINK_ARMED:
case IB_LINK_ACTIVE:
physp0 = osm_node_get_physp_ptr(p_node, 0);
if (mlnx_epi_supported) {
m_key = ib_port_info_get_m_key(&physp0->port_info);
context.pi_context.node_guid = osm_node_get_node_guid(p_node);
context.pi_context.port_guid = osm_physp_get_port_guid(p_physp);
context.pi_context.set_method = FALSE;
context.pi_context.light_sweep = FALSE;
context.pi_context.active_transition = FALSE;
context.pi_context.client_rereg = FALSE;
status = osm_req_get(sm,
osm_physp_get_dr_path_ptr(p_physp),
IB_MAD_ATTR_MLNX_EXTENDED_PORT_INFO,
cl_hton32(port_num), FALSE, m_key,
CL_DISP_MSGID_NONE, &context);
if (status != IB_SUCCESS)
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 0F11: "
"Failure initiating MLNX ExtPortInfo request (%s)\n",
ib_get_err_str(status));
}
if (sm->p_subn->in_sweep_hop_0 == FALSE) {
/*
To avoid looping forever, only probe the port if it
is NOT the port that responded to the SMP.
Request node info from the other end of this link:
1) Copy the current path from the parent node.
2) Extend the path to the next hop thru this port.
3) Request node info with the new path
*/
if (p_pi->local_port_num !=
osm_physp_get_port_num(p_physp)) {
path = *osm_physp_get_dr_path_ptr(p_physp);
if (osm_dr_path_extend(&path,
osm_physp_get_port_num
(p_physp))) {
OSM_LOG(sm->p_log, OSM_LOG_ERROR,
"ERR 0F08: "
"DR path with hop count %d couldn't be extended\n",
path.hop_count);
break;
}
memset(&context, 0, sizeof(context));
context.ni_context.node_guid =
osm_node_get_node_guid(p_node);
context.ni_context.port_num =
osm_physp_get_port_num(p_physp);
status = osm_req_get(sm, &path,
IB_MAD_ATTR_NODE_INFO, 0,
TRUE, 0,
CL_DISP_MSGID_NONE,
&context);
if (status != IB_SUCCESS)
OSM_LOG(sm->p_log, OSM_LOG_ERROR,
"ERR 0F02: "
"Failure initiating NodeInfo request (%s)\n",
ib_get_err_str(status));
} else
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Skipping SMP responder port %u\n",
p_pi->local_port_num);
}
break;
default:
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 0F03: "
"Unknown link state = %u, port = %u\n",
ib_port_info_get_port_state(p_pi),
p_pi->local_port_num);
break;
}
if (ib_port_info_get_port_state(p_pi) > IB_LINK_INIT && p_node->sw &&
!ib_switch_info_get_state_change(&p_node->sw->switch_info) &&
p_node->sw->need_update == 1)
p_node->sw->need_update = 0;
if (p_physp->need_update)
sm->p_subn->ignore_existing_lfts = TRUE;
/*
Update the PortInfo attribute.
*/
osm_physp_set_port_info(p_physp, p_pi, sm);
if (ib_port_info_get_port_state(p_pi) == IB_LINK_DOWN)
goto Exit;
p_remote_physp = osm_physp_get_remote(p_physp);
if (p_remote_physp) {
p_remote_node = osm_physp_get_node_ptr(p_remote_physp);
if (p_remote_node->sw) {
data_vls = 1U << (ib_port_info_get_vl_cap(p_pi) - 1);
if (data_vls > 1U << (sm->p_subn->opt.max_op_vls - 1))
data_vls = 1U << (sm->p_subn->opt.max_op_vls - 1);
if (data_vls >= IB_MAX_NUM_VLS)
data_vls = IB_MAX_NUM_VLS - 1;
if ((uint8_t)data_vls < sm->p_subn->min_sw_data_vls) {
OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
"Setting switch port minimal data VLs "
"to:%u defined by node:0x%"
PRIx64 ", port:%u\n", data_vls,
cl_ntoh64(osm_node_get_node_guid(p_node)),
port_num);
sm->p_subn->min_sw_data_vls = data_vls;
}
}
}
Exit:
OSM_LOG_EXIT(sm->p_log);
}
/**********************************************************************
The plock must be held before calling this function.
**********************************************************************/
static void
__osm_pi_rcv_process_switch_port(IN osm_sm_t * sm,
IN osm_node_t * const p_node,
IN osm_physp_t * const p_physp,
IN ib_port_info_t * const p_pi)
{
ib_api_status_t status = IB_SUCCESS;
osm_madw_context_t context;
osm_physp_t *p_remote_physp;
osm_node_t *p_remote_node;
uint8_t port_num;
uint8_t remote_port_num;
osm_dr_path_t path;
OSM_LOG_ENTER(sm->p_log);
/*
Check the state of the physical port.
If there appears to be something on the other end of the wire,
then ask for NodeInfo. Ignore the switch management port.
*/
port_num = osm_physp_get_port_num(p_physp);
/* if in_sweep_hop_0 is TRUE, then this means the SM is on the switch,
and we got switchInfo of our local switch. Do not continue
probing through the switch. */
if (port_num != 0 && sm->p_subn->in_sweep_hop_0 == FALSE) {
switch (ib_port_info_get_port_state(p_pi)) {
case IB_LINK_DOWN:
p_remote_physp = osm_physp_get_remote(p_physp);
if (p_remote_physp) {
p_remote_node =
osm_physp_get_node_ptr(p_remote_physp);
remote_port_num =
osm_physp_get_port_num(p_remote_physp);
OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
"Unlinking local node 0x%" PRIx64
", port %u"
"\n\t\t\t\tand remote node 0x%" PRIx64
", port %u\n",
cl_ntoh64(osm_node_get_node_guid
(p_node)), port_num,
cl_ntoh64(osm_node_get_node_guid
(p_remote_node)),
remote_port_num);
if (sm->ucast_mgr.cache_valid)
osm_ucast_cache_add_link(&sm->ucast_mgr,
p_physp,
p_remote_physp);
osm_node_unlink(p_node, (uint8_t) port_num,
p_remote_node,
(uint8_t) remote_port_num);
}
break;
case IB_LINK_INIT:
case IB_LINK_ARMED:
case IB_LINK_ACTIVE:
/*
To avoid looping forever, only probe the port if it
is NOT the port that responded to the SMP.
Request node info from the other end of this link:
1) Copy the current path from the parent node.
2) Extend the path to the next hop thru this port.
3) Request node info with the new path
*/
if (p_pi->local_port_num !=
osm_physp_get_port_num(p_physp)) {
path = *osm_physp_get_dr_path_ptr(p_physp);
osm_dr_path_extend(&path,
osm_physp_get_port_num
(p_physp));
memset(&context, 0, sizeof(context));
context.ni_context.node_guid =
osm_node_get_node_guid(p_node);
context.ni_context.port_num =
osm_physp_get_port_num(p_physp);
status = osm_req_get(sm,
&path,
IB_MAD_ATTR_NODE_INFO,
0,
CL_DISP_MSGID_NONE,
&context);
if (status != IB_SUCCESS)
OSM_LOG(sm->p_log, OSM_LOG_ERROR,
"ERR 0F02: "
"Failure initiating NodeInfo request (%s)\n",
ib_get_err_str(status));
} else
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Skipping SMP responder port %u\n",
p_pi->local_port_num);
break;
default:
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 0F03: "
"Unknown link state = %u, port = %u\n",
ib_port_info_get_port_state(p_pi),
p_pi->local_port_num);
break;
}
}
if (ib_port_info_get_port_state(p_pi) > IB_LINK_INIT && p_node->sw &&
p_node->sw->need_update == 1)
p_node->sw->need_update = 0;
if (p_physp->need_update)
sm->p_subn->ignore_existing_lfts = TRUE;
if (port_num == 0)
pi_rcv_check_and_fix_lid(sm->p_log, p_pi, p_physp);
/*
Update the PortInfo attribute.
*/
osm_physp_set_port_info(p_physp, p_pi);
if (port_num == 0) {
/* Determine if base switch port 0 */
if (p_node->sw &&
!ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info))
/* PortState is not used on BSP0 but just in case it is DOWN */
p_physp->port_info = *p_pi;
__osm_pi_rcv_process_endport(sm, p_physp, p_pi);
}
OSM_LOG_EXIT(sm->p_log);
}
