/*
* layout_addresses() is called after all the assembly code has been read and
* fragments, symbols and fixups have been created. This routine sets the
* address of the fragments and symbols. Then it does the fixups of the frags
* and prepares the fixes so relocation entries can be created from them.
*/
void
layout_addresses(
void)
{
struct frchain *frchainP;
fragS *fragP;
relax_addressT slide, tmp;
symbolS *symbolP;
uint32_t nbytes, fill_size, repeat_expression, partial_bytes, layout_pass;
relax_stateT old_fr_type;
int changed;
if(frchain_root == NULL)
return;
/*
* If there is any current frag close it off.
*/
if(frag_now != NULL && frag_now->fr_fix == 0){
frag_now->fr_fix = obstack_next_free(&frags) -
frag_now->fr_literal;
frag_wane(frag_now);
}
/*
* For every section, add a last ".fill 0" frag that will later be used
* as the ending address of that section.
*/
for(frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next){
/*
* We must do the obstack_finish(), so the next object we put on
* obstack frags will not appear to start at the fr_literal of the
* current frag. Also, it ensures that the next object will begin
* on a address that is aligned correctly for the engine that runs
* the assembler.
*/
(void)obstack_finish(&frags);
/*
* Make a fresh frag for the last frag.
*/
frag_now = (fragS *)obstack_alloc(&frags, SIZEOF_STRUCT_FRAG);
memset(frag_now, '\0', SIZEOF_STRUCT_FRAG);
frag_now->fr_next = NULL;
(void)obstack_finish(&frags);
/*
* Append the new frag to current frchain.
*/
frchainP->frch_last->fr_next = frag_now;
frchainP->frch_last = frag_now;
frag_wane(frag_now);
}
/*
* Now set the relative addresses of frags within the section by
* relaxing each section. That is all sections will start at address
* zero and addresses of the frags in that section will increase from
* there.
*
* The debug sections are done last as other section are needed to be
* done first becase debug sections may have line numbers with .loc
* directives in them and their sizes need to be set before processing
* the line number sections. We also do sections that have rs_leb128s
* in them before debug sections but after other sections since they
* are used for things like exception tables and they may be refering to
* sections such that their sizes too must be known first.
*/
for(frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next){
if((frchainP->frch_section.flags & S_ATTR_DEBUG) == S_ATTR_DEBUG)
frchainP->layout_pass = 2;
else if(frchainP->has_rs_leb128s == TRUE)
frchainP->layout_pass = 1;
else
frchainP->layout_pass = 0;
}
for(layout_pass = 0; layout_pass < 3; layout_pass++){
do{
changed = 0;
for(frchainP = frchain_root;
frchainP;
frchainP = frchainP->frch_next){
if(frchainP->layout_pass != layout_pass)
continue;
if((frchainP->frch_section.flags & SECTION_TYPE) ==
S_ZEROFILL)
continue;
/*
* This is done so in case md_estimate_size_before_relax()
* (called by relax_section) wants to make fixSs they are
* for this section.
*/
frchain_now = frchainP;
changed += relax_section(frchainP->frch_root,
frchainP->frch_nsect);
}
}
while(changed != 0);
}
/*
* Now set the absolute addresses of all frags by sliding the frags in
* each non-zerofill section by the address ranges taken up by the
* sections before it.
*/
slide = 0;
for(frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next){
if((frchainP->frch_section.flags & SECTION_TYPE) == S_ZEROFILL)
continue;
slide = round(slide, 1 << frchainP->frch_section.align);
tmp = frchainP->frch_last->fr_address;
if(slide != 0){
for(fragP = frchainP->frch_root; fragP; fragP = fragP->fr_next){
fragP->fr_address += slide;
}
}
slide += tmp;
}
/*
* Now with the non-zerofill section addresses set set all of the
* addresses of the zerofill sections. Comming in the fr_address is
* the size of the section and going out it is the start address. This
* will make layout_symbols() work out naturally. The only funky thing
* is that section numbers do not end up in address order.
*/
for(frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next){
if((frchainP->frch_section.flags & SECTION_TYPE) != S_ZEROFILL)
continue;
slide = round(slide, 1 << frchainP->frch_section.align);
tmp = frchainP->frch_root->fr_address;
frchainP->frch_root->fr_address = slide;
frchainP->frch_last->fr_address = tmp + slide;
slide += tmp;
}
/*
* Set the symbol addresses based on their frag's address.
* First forward references are handled.
*/
for(symbolP = symbol_rootP; symbolP; symbolP = symbolP->sy_next){
if(symbolP->sy_forward != NULL){
if(symbolP->sy_nlist.n_type & N_STAB)
symbolP->sy_other = symbolP->sy_forward->sy_other;
symbolP->sy_value += symbolP->sy_forward->sy_value +
symbolP->sy_forward->sy_frag->fr_address;
symbolP->sy_forward = 0;
}
}
for(symbolP = symbol_rootP; symbolP; symbolP = symbolP->sy_next){
symbolP->sy_value += symbolP->sy_frag->fr_address;
}
/*
* At this point the addresses of frags now reflect addresses we use in
* the object file and the symbol values are correct.
* Scan the frags, converting any ".org"s and ".align"s to ".fill"s.
* Also converting any machine-dependent frags using md_convert_frag();
*/
for(frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next){
/*
* This is done so any fixes created by md_convert_frag() are for
* this section.
*/
frchain_now = frchainP;
for(fragP = frchainP->frch_root; fragP; fragP = fragP->fr_next){
switch(fragP->fr_type){
case rs_align:
case rs_org:
old_fr_type = fragP->fr_type;
/* convert this frag to an rs_fill type */
fragP->fr_type = rs_fill;
/*
* Calculate the number of bytes the variable part of the
* the rs_fill frag will need to fill. Then calculate this
* as the fill_size * repeat_expression + partial_bytes.
*/
know(fragP->fr_next != NULL);
nbytes = fragP->fr_next->fr_address -
fragP->fr_address -
fragP->fr_fix;
if(nbytes < 0){
as_warn("rs_org invalid, dot past value by %d bytes",
nbytes);
nbytes = 0;
}
fill_size = fragP->fr_var;
repeat_expression = nbytes / fill_size;
#ifdef I386
/*
* For x86 architecures in sections containing only
* instuctions being padded with nops that are aligned to 16
* bytes or less and are assembled with -dynamic we will
* actually end up padding with the optimal nop sequence.
* Previously there has been the maximum number of bytes
* allocated in the frag to use for this.
*/
if(old_fr_type == rs_align &&
(frchain_now->frch_section.flags &
S_ATTR_PURE_INSTRUCTIONS) != 0 &&
fill_size == 1 &&
fragP->fr_literal[fragP->fr_fix] == (char)0x90 &&
nbytes > 0 && nbytes < 16 &&
flagseen['k'] == TRUE){
i386_align_code(fragP, nbytes);
/*
* The call to i386_align_code() has set the fill_size
* in fragP->fr_var to nbytes. So we set the fr_offset
* to the fill repeat_expression to 1 to match for this
* now an rs_fill type frag.
*/
fragP->fr_offset = 1;
break;
}
#endif /* I386 */
partial_bytes = nbytes - (repeat_expression * fill_size);
/*
* Now set the fr_offset to the fill repeat_expression
* since this is now an rs_fill type. The fr_var is still
* the fill_size.
*/
fragP->fr_offset = repeat_expression;
/*
* For rs_align frags there may be partial_bytes to fill
* with zeros before we can fill with the fill_expression
* of fill_size. When the rs_align frag was created it was
* created with fill_size-1 extra bytes in the fixed part.
*/
if(partial_bytes != 0){
/* moved the fill_expression bytes foward */
memmove(fragP->fr_literal +fragP->fr_fix +partial_bytes,
fragP->fr_literal +fragP->fr_fix,
fragP->fr_var);
/* zero out the partial_bytes */
memset(fragP->fr_literal + fragP->fr_fix,
'\0',
partial_bytes);
/* adjust the fixed part of the frag */
fragP->fr_fix += partial_bytes;
}
break;
case rs_fill:
break;
case rs_machine_dependent:
md_convert_frag(fragP);
/*
* After md_convert_frag, we make the frag into a ".fill 0"
* md_convert_frag() should set up any fixSs and constants
* required.
*/
frag_wane(fragP);
break;
case rs_dwarf2dbg:
dwarf2dbg_convert_frag(fragP);
break;
case rs_leb128:
{
int size;
#ifdef OLD
valueT value = S_GET_VALUE (fragP->fr_symbol);
#else
valueT value;
expressionS *expression;
if(fragP->fr_symbol->expression != NULL){
expression =
(expressionS *)fragP->fr_symbol->expression;
value = 0;
if(expression->X_add_symbol != NULL)
value += expression->X_add_symbol->sy_nlist.n_value;
if(expression->X_subtract_symbol != NULL)
value -=
expression->X_subtract_symbol->sy_nlist.n_value;
value += expression->X_add_number;
}
else{
value = fragP->fr_symbol->sy_nlist.n_value +
fragP->fr_address;
}
#endif
size = output_leb128 (fragP->fr_literal + fragP->fr_fix,
value,
fragP->fr_subtype);
fragP->fr_fix += size;
fragP->fr_type = rs_fill;
fragP->fr_var = 0;
fragP->fr_offset = 0;
fragP->fr_symbol = NULL;
}
break;
default:
BAD_CASE(fragP->fr_type);
break;
}
}
}
/*
* For each section do the fixups for the frags.
*/
for(frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next){
now_seg = frchainP->frch_nsect;
fixup_section(frchainP->frch_fix_root, frchainP->frch_nsect);
}
}
static void
out_sleb128 (offsetT value)
{
output_leb128 (frag_more (sizeof_leb128 (value, 1)), value, 1);
}
static void
emit_inc_line_addr (int line_delta, addressT addr_delta, char *p, int len)
{
unsigned int tmp, opcode;
int need_copy = 0;
char *end = p + len;
/* Line number sequences cannot go backward in addresses. This means
we've incorrectly ordered the statements in the sequence. */
gas_assert ((offsetT) addr_delta >= 0);
/* Scale the address delta by the minimum instruction length. */
scale_addr_delta (&addr_delta);
/* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.
We cannot use special opcodes here, since we want the end_sequence
to emit the matrix entry. */
if (line_delta == INT_MAX)
{
if (addr_delta == MAX_SPECIAL_ADDR_DELTA)
*p++ = DW_LNS_const_add_pc;
else
{
*p++ = DW_LNS_advance_pc;
p += output_leb128 (p, addr_delta, 0);
}
*p++ = DW_LNS_extended_op;
*p++ = 1;
*p++ = DW_LNE_end_sequence;
goto done;
}
/* Bias the line delta by the base. */
tmp = line_delta - DWARF2_LINE_BASE;
/* If the line increment is out of range of a special opcode, we
must encode it with DW_LNS_advance_line. */
if (tmp >= DWARF2_LINE_RANGE)
{
*p++ = DW_LNS_advance_line;
p += output_leb128 (p, line_delta, 1);
line_delta = 0;
tmp = 0 - DWARF2_LINE_BASE;
need_copy = 1;
}
/* Prettier, I think, to use DW_LNS_copy instead of a "line +0, addr +0"
special opcode. */
if (line_delta == 0 && addr_delta == 0)
{
*p++ = DW_LNS_copy;
goto done;
}
/* Bias the opcode by the special opcode base. */
tmp += DWARF2_LINE_OPCODE_BASE;
/* Avoid overflow when addr_delta is large. */
if (addr_delta < 256 + MAX_SPECIAL_ADDR_DELTA)
{
/* Try using a special opcode. */
opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
if (opcode <= 255)
{
*p++ = opcode;
goto done;
}
/* Try using DW_LNS_const_add_pc followed by special op. */
opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
if (opcode <= 255)
{
*p++ = DW_LNS_const_add_pc;
*p++ = opcode;
goto done;
}
}
/* Otherwise use DW_LNS_advance_pc. */
*p++ = DW_LNS_advance_pc;
p += output_leb128 (p, addr_delta, 0);
if (need_copy)
*p++ = DW_LNS_copy;
else
*p++ = tmp;
done:
gas_assert (p == end);
}
static void
out_uleb128 (addressT value)
{
output_leb128 (frag_more (sizeof_leb128 (value, 0)), value, 0);
}
static void
emit_fixed_inc_line_addr (int line_delta, addressT addr_delta, fragS *frag,
char *p, int len)
{
expressionS *pexp;
segT line_seg;
char *end = p + len;
/* Line number sequences cannot go backward in addresses. This means
we've incorrectly ordered the statements in the sequence. */
gas_assert ((offsetT) addr_delta >= 0);
/* INT_MAX is a signal that this is actually a DW_LNE_end_sequence. */
if (line_delta != INT_MAX)
{
*p++ = DW_LNS_advance_line;
p += output_leb128 (p, line_delta, 1);
}
pexp = symbol_get_value_expression (frag->fr_symbol);
line_seg = subseg_get (".debug_line", 0);
/* The DW_LNS_fixed_advance_pc opcode has a 2-byte operand so it can
advance the address by at most 64K. Linker relaxation (without
which this function would not be used) could change the operand by
an unknown amount. If the address increment is getting close to
the limit, just reset the address. */
if (addr_delta > 50000)
{
symbolS *to_sym;
expressionS exp;
gas_assert (pexp->X_op == O_subtract);
to_sym = pexp->X_add_symbol;
*p++ = DW_LNS_extended_op;
p += output_leb128 (p, sizeof_address + 1, 0);
*p++ = DW_LNE_set_address;
exp.X_op = O_symbol;
exp.X_add_symbol = to_sym;
exp.X_add_number = 0;
subseg_change (line_seg, 0);
emit_expr_fix (&exp, sizeof_address, frag, p);
p += sizeof_address;
}
else
{
*p++ = DW_LNS_fixed_advance_pc;
subseg_change (line_seg, 0);
emit_expr_fix (pexp, 2, frag, p);
p += 2;
}
if (line_delta == INT_MAX)
{
*p++ = DW_LNS_extended_op;
*p++ = 1;
*p++ = DW_LNE_end_sequence;
}
else
*p++ = DW_LNS_copy;
gas_assert (p == end);
}
