void find_sensor(uint8_t *diff, uint8_t id[])
{
for (;;) {
*diff = ow_rom_search( *diff, &id[0] );
if ( *diff==OW_PRESENCE_ERR || *diff==OW_DATA_ERR || *diff == OW_LAST_DEVICE ) return;
return;
}
}
/* find DS18X20 Sensors on 1-Wire-Bus
input/ouput: diff is the result of the last rom-search
output: id is the rom-code of the sensor found */
void DS18X20_find_sensor(uint8_t *diff, uint8_t id[])
{
for (;;) {
*diff = ow_rom_search( *diff, &id[0] );
if ( *diff==OW_PRESENCE_ERR || *diff==OW_DATA_ERR || *diff == OW_LAST_DEVICE ) return;
if ( id[0] == DS18B20_ID || id[0] == DS18S20_ID ) return;
}
}
/* verbose output rom-search follows read-scratchpad in one loop */
uint8_t DS18X20_read_meas_all_verbose( void )
{
uint8_t id[OW_ROMCODE_SIZE], sp[DS18X20_SP_SIZE], diff;
uint8_t i;
uint16_t meas;
int16_t decicelsius;
char s[10];
uint8_t subzero, cel, cel_frac_bits;
for( diff = OW_SEARCH_FIRST; diff != OW_LAST_DEVICE; )
{
diff = ow_rom_search( diff, &id[0] );
if( diff == OW_PRESENCE_ERR ) {
uart_puts_P( "No Sensor found\r" );
return OW_PRESENCE_ERR; // <--- early exit!
}
if( diff == OW_DATA_ERR ) {
uart_puts_P( "Bus Error\r" );
return OW_DATA_ERR; // <--- early exit!
}
DS18X20_show_id_uart( id, OW_ROMCODE_SIZE );
if( id[0] == DS18B20_FAMILY_CODE || id[0] == DS18S20_FAMILY_CODE ||
id[0] == DS1822_FAMILY_CODE ) {
// temperature sensor
uart_putc ('\r');
ow_byte_wr( DS18X20_READ ); // read command
for ( i=0 ; i< DS18X20_SP_SIZE; i++ ) {
sp[i]=ow_byte_rd();
}
show_sp_uart( sp, DS18X20_SP_SIZE );
if ( crc8( &sp[0], DS18X20_SP_SIZE ) ) {
uart_puts_P( " CRC FAIL " );
} else {
uart_puts_P( " CRC O.K. " );
}
uart_putc ('\r');
meas = sp[0]; // LSB Temp. from Scrachpad-Data
meas |= (uint16_t) (sp[1] << 8); // MSB
uart_puts_P( " T_raw=");
uart_puthex_byte( (uint8_t)(meas >> 8) );
uart_puthex_byte( (uint8_t)meas );
uart_puts_P( " " );
if( id[0] == DS18S20_FAMILY_CODE ) { // 18S20
uart_puts_P( "S20/09" );
}
else if ( id[0] == DS18B20_FAMILY_CODE ||
id[0] == DS1822_FAMILY_CODE ) { // 18B20 or 1822
i=sp[DS18B20_CONF_REG];
if ( (i & DS18B20_12_BIT) == DS18B20_12_BIT ) {
uart_puts_P( "B20/12" );
}
else if ( (i & DS18B20_11_BIT) == DS18B20_11_BIT ) {
uart_puts_P( "B20/11" );
}
else if ( (i & DS18B20_10_BIT) == DS18B20_10_BIT ) {
uart_puts_P( " B20/10 " );
}
else { // if ( (i & DS18B20_9_BIT) == DS18B20_9_BIT ) {
uart_puts_P( "B20/09" );
}
}
uart_puts_P(" ");
DS18X20_meas_to_cel( id[0], sp, &subzero, &cel, &cel_frac_bits );
DS18X20_uart_put_temp( subzero, cel, cel_frac_bits );
decicelsius = DS18X20_raw_to_decicelsius( id[0], sp );
if ( decicelsius == DS18X20_INVALID_DECICELSIUS ) {
uart_puts_P("* INVALID *");
} else {
uart_puts_P(" conv: ");
uart_put_int(decicelsius);
uart_puts_P(" deci°C ");
DS18X20_format_from_decicelsius( decicelsius, s, 10 );
uart_puts_P(" fmt: ");
uart_puts(s);
uart_puts_P(" °C ");
}
uart_puts("\r");
} // if meas-sensor
} // loop all sensors
/* verbose output rom-search follows read-scratchpad in one loop */
uint8_t DS18X20_read_meas_all_verbose( void )
{
uint8_t id[OW_ROMCODE_SIZE], sp[DS18X20_SP_SIZE], diff;
uint8_t i;
uint16_t meas;
uint8_t subzero, cel, cel_frac_bits;
for( diff = OW_SEARCH_FIRST; diff != OW_LAST_DEVICE; )
{
diff = ow_rom_search( diff, &id[0] );
if( diff == OW_PRESENCE_ERR ) {
uart_puts_P( "No Sensor found\r\n" );
return OW_PRESENCE_ERR;
}
if( diff == OW_DATA_ERR ) {
uart_puts_P( "Bus Error\r\n" );
return OW_DATA_ERR;
}
DS18X20_show_id_uart( id, OW_ROMCODE_SIZE );
if( id[0] == DS18B20_ID || id[0] == DS18S20_ID ) { // temperature sensor
uart_puts_P ("\r\n");
ow_byte_wr( DS18X20_READ ); // read command
for ( i=0 ; i< DS18X20_SP_SIZE; i++ )
sp[i]=ow_byte_rd();
show_sp_uart( sp, DS18X20_SP_SIZE );
if ( crc8( &sp[0], DS18X20_SP_SIZE ) )
uart_puts_P( " CRC FAIL " );
else
uart_puts_P( " CRC O.K. " );
uart_puts_P ("\r\n");
meas = sp[0]; // LSB Temp. from Scrachpad-Data
meas |= (uint16_t) (sp[1] << 8); // MSB
uart_puts_P(" T_raw=");
uart_puthex_byte((uint8_t)(meas>>8));
uart_puthex_byte((uint8_t)meas);
uart_puts_P(" ");
if( id[0] == DS18S20_ID ) { // 18S20
uart_puts_P( "S20/09" );
}
else if ( id[0] == DS18B20_ID ) { // 18B20
i=sp[DS18B20_CONF_REG];
if ( (i & DS18B20_12_BIT) == DS18B20_12_BIT ) {
uart_puts_P( "B20/12" );
}
else if ( (i & DS18B20_11_BIT) == DS18B20_11_BIT ) {
uart_puts_P( "B20/11" );
}
else if ( (i & DS18B20_10_BIT) == DS18B20_10_BIT ) {
uart_puts_P( " B20/10 " );
}
else { // if ( (i & DS18B20_9_BIT) == DS18B20_9_BIT ) {
uart_puts_P( "B20/09" );
}
}
uart_puts_P(" ");
DS18X20_meas_to_cel(id[0], sp, &subzero, &cel, &cel_frac_bits);
DS18X20_uart_put_temp(subzero, cel, cel_frac_bits);
uart_puts("\r\n");
} // if meas-sensor
} // loop all sensors
