void
part_emulation_return (urj_chain_t *chain, int n)
{
part_emuir_set (chain, n, INSN_RTE, URJ_CHAIN_EXITMODE_UPDATE);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_emeen (chain, n);
part_dbgctl_bit_clear_wakeup (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_IDLE);
/* get the RTE out of EMUIR so we don't execute it more than once */
part_emuir_set (chain, n, INSN_NOP, URJ_CHAIN_EXITMODE_IDLE);
}
uint32_t
part_register_get (urj_chain_t *chain, int n, enum core_regnum reg)
{
urj_part_t *part;
urj_tap_register_t *r;
uint32_t r0 = 0;
if (DREG_P (reg) || PREG_P (reg))
part_emuir_set (chain, n, gen_move (REG_EMUDAT, reg), URJ_CHAIN_EXITMODE_IDLE);
else
{
r0 = part_register_get (chain, n, REG_R0);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_set_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
part_emuir_set_2 (chain, n, gen_move (REG_R0, reg),
gen_move (REG_EMUDAT, REG_R0), URJ_CHAIN_EXITMODE_IDLE);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
}
part_scan_select (chain, n, EMUDAT_SCAN);
urj_tap_chain_shift_data_registers_mode (chain, 1, 1, URJ_CHAIN_EXITMODE_UPDATE);
part = chain->parts->parts[n];
r = part->active_instruction->data_register->out;
if (!DREG_P (reg) && !PREG_P (reg))
part_register_set (chain, n, REG_R0, r0);
return emudat_value (r);
}
void
bfin_core_reset (urj_chain_t *chain, int n)
{
part_emulation_disable (chain, n);
part_emuir_set (chain, n, INSN_NOP, URJ_CHAIN_EXITMODE_UPDATE);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_set_sram_init (chain, n);
part_dbgctl_bit_set_sysrst (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
part_wait_in_reset (chain, n);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_sysrst (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
part_wait_reset (chain, n);
part_emulation_enable (chain, n);
part_emulation_trigger (chain, n);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_sram_init (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
}
uint32_t
part_mmr_read_clobber_r0 (urj_chain_t *chain, int n, int32_t offset, int size)
{
uint32_t value;
assert (size == 2 || size == 4);
if (offset == 0)
{
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_set_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
if (size == 2)
part_emuir_set_2 (chain, n,
gen_load16z (REG_R0, REG_P0),
gen_move (REG_EMUDAT, REG_R0),
URJ_CHAIN_EXITMODE_UPDATE);
else
part_emuir_set_2 (chain, n,
gen_load32 (REG_R0, REG_P0),
gen_move (REG_EMUDAT, REG_R0),
URJ_CHAIN_EXITMODE_UPDATE);
}
else
{
if (size == 2)
part_emuir_set (chain, n, gen_load16z_offset (REG_R0, REG_P0, offset), URJ_CHAIN_EXITMODE_IDLE);
else
part_emuir_set (chain, n, gen_load32_offset (REG_R0, REG_P0, offset), URJ_CHAIN_EXITMODE_IDLE);
part_emuir_set (chain, n, gen_move (REG_EMUDAT, REG_R0), URJ_CHAIN_EXITMODE_UPDATE);
}
value = part_emudat_get (chain, n, URJ_CHAIN_EXITMODE_IDLE);
if (offset == 0)
{
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
}
return value;
}
void
part_mmr_write_clobber_r0 (urj_chain_t *chain, int n, int32_t offset, uint32_t data, int size)
{
assert (size == 2 || size == 4);
part_emudat_set (chain, n, data, URJ_CHAIN_EXITMODE_UPDATE);
if (offset == 0)
{
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_set_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
if (size == 2)
part_emuir_set_2 (chain, n,
gen_move (REG_R0, REG_EMUDAT),
gen_store16 (REG_P0, REG_R0),
URJ_CHAIN_EXITMODE_IDLE);
else
part_emuir_set_2 (chain, n,
gen_move (REG_R0, REG_EMUDAT),
gen_store32 (REG_P0, REG_R0),
URJ_CHAIN_EXITMODE_IDLE);
}
else
{
part_emuir_set (chain, n, gen_move (REG_R0, REG_EMUDAT), URJ_CHAIN_EXITMODE_IDLE);
if (size == 2)
part_emuir_set (chain, n, gen_store16_offset (REG_P0, offset, REG_R0), URJ_CHAIN_EXITMODE_IDLE);
else
part_emuir_set (chain, n, gen_store32_offset (REG_P0, offset, REG_R0), URJ_CHAIN_EXITMODE_IDLE);
}
if (offset == 0)
{
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
}
}
void
chain_system_reset (urj_chain_t *chain)
{
uint32_t p0, r0;
p0 = part_get_p0 (chain, chain->main_part);
r0 = part_get_r0 (chain, chain->main_part);
/*
* Flush all system events like cache line fills. Otherwise,
* when we reset the system side, any events that the core was
* waiting on no longer exist, and the core hangs.
*/
part_emuir_set (chain, chain->main_part, INSN_SSYNC, URJ_CHAIN_EXITMODE_IDLE);
/* Write 0x7 to SWRST to start system reset. */
part_set_p0 (chain, chain->main_part, SWRST);
part_set_r0 (chain, chain->main_part, 0x7);
part_emuir_set (chain, chain->main_part, gen_store16_offset (REG_P0, 0, REG_R0), URJ_CHAIN_EXITMODE_IDLE);
/*
* Delay at least 10 SCLKs instead of doing an SSYNC insn.
* Since the system is being reset, the sync signal might
* not be asserted, and so the core hangs waiting for it.
* The magic "10" number was given to us by ADI designers
* who looked at the schematic and ran some simulations.
*/
usleep (100);
/* Write 0x0 to SWRST to stop system reset. */
part_set_r0 (chain, chain->main_part, 0);
part_emuir_set (chain, chain->main_part, gen_store16_offset (REG_P0, 0, REG_R0), URJ_CHAIN_EXITMODE_IDLE);
/* Delay at least 1 SCLK; see comment above for more info. */
usleep (100);
part_set_p0 (chain, chain->main_part, p0);
part_set_r0 (chain, chain->main_part, r0);
}
void
part_execute_instructions (urj_chain_t *chain, int n, struct bfin_insn *insns)
{
while (insns)
{
if (insns->type == BFIN_INSN_NORMAL)
part_emuir_set (chain, n, insns->i, URJ_CHAIN_EXITMODE_IDLE);
else /* insns->type == BFIN_INSN_SET_EMUDAT */
part_emudat_set (chain, n, insns->i, URJ_CHAIN_EXITMODE_UPDATE);
insns = insns->next;
}
return;
}
void
part_emupc_reset (urj_chain_t *chain, int n, uint32_t new_pc)
{
urj_part_t *part = chain->parts->parts[n];
uint32_t p0;
p0 = part_register_get (chain, n, REG_P0);
BFIN_PART_EMUPC (part) = new_pc;
part_register_set (chain, n, REG_P0, new_pc);
part_emuir_set (chain, n, gen_jump_reg (REG_P0), URJ_CHAIN_EXITMODE_IDLE);
part_register_set (chain, n, REG_P0, p0);
}
void
part_emulation_trigger (urj_chain_t *chain, int n)
{
part_emuir_set (chain, n, INSN_NOP, URJ_CHAIN_EXITMODE_UPDATE);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_set_wakeup (chain, n);
part_dbgctl_bit_set_emeen (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_IDLE);
/* I don't know why, but the following code works. */
/* Enter the emulation mode */
urj_tap_chain_defer_clock (chain, 1, 0, 1);
/* Bring the TAP state to Update-DR */
urj_tap_chain_defer_clock (chain, 0, 0, 1);
urj_tap_chain_defer_clock (chain, 1, 0, 2);
}
void
part_register_set (urj_chain_t *chain, int n, enum core_regnum reg, uint32_t value)
{
urj_part_t *part;
urj_tap_register_t *r;
uint32_t r0 = 0;
if (!DREG_P (reg) && !PREG_P (reg))
r0 = part_register_get (chain, n, REG_R0);
part_scan_select (chain, n, EMUDAT_SCAN);
part = chain->parts->parts[n];
r = part->active_instruction->data_register->in;
BFIN_PART_EMUDAT_IN (part) = value;
emudat_init_value (r, value);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
if (DREG_P (reg) || PREG_P (reg))
part_emuir_set (chain, n, gen_move (reg, REG_EMUDAT), URJ_CHAIN_EXITMODE_IDLE);
else
{
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_set_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
part_emuir_set_2 (chain, n, gen_move (REG_R0, REG_EMUDAT),
gen_move (reg, REG_R0), URJ_CHAIN_EXITMODE_IDLE);
part_scan_select (chain, n, DBGCTL_SCAN);
part_dbgctl_bit_clear_emuirlpsz_2 (chain, n);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
part_register_set (chain, n, REG_R0, r0);
}
}
static int
cmd_bfin_run (urj_chain_t *chain, char *params[])
{
int num_params;
num_params = urj_cmd_params (params);
if (num_params < 2)
{
urj_error_set (URJ_ERROR_SYNTAX,
"#parameters should be >= 2, not %d",
num_params);
return URJ_STATUS_FAIL;
}
/* The remaining commands require cable or parts. */
if (urj_cmd_test_cable (chain) != URJ_STATUS_OK)
return URJ_STATUS_FAIL;
if (!chain->parts)
{
urj_error_set (URJ_ERROR_ILLEGAL_STATE, "no parts, Run '%s' first",
"detect");
return URJ_STATUS_FAIL;
}
if (chain->active_part >= chain->parts->len)
{
urj_error_set (URJ_ERROR_ILLEGAL_STATE, "no active part");
return URJ_STATUS_FAIL;
}
if (!part_is_bfin (chain, chain->active_part))
{
urj_error_set (URJ_ERROR_ILLEGAL_STATE, "not a Blackfin part");
return URJ_STATUS_FAIL;
}
assert (chain->active_part >= 0 && chain->active_part < chain->parts->len);
if (strcmp (params[1], "emulation") == 0)
{
if (num_params != 3)
{
urj_error_set (URJ_ERROR_BFIN,
"'bfin emulation' requires 1 parameter, not %d",
num_params - 2);
return URJ_STATUS_FAIL;
}
if (strcmp (params[2], "enable") == 0)
{
part_emulation_enable (chain, chain->active_part);
}
else if (strcmp (params[2], "trigger") == 0)
{
part_emulation_trigger (chain, chain->active_part);
}
else if (strcmp (params[2], "enter") == 0)
{
part_emulation_enable (chain, chain->active_part);
part_emulation_trigger (chain, chain->active_part);
}
else if (strcmp (params[2], "return") == 0)
{
part_emulation_return (chain, chain->active_part);
}
else if (strcmp (params[2], "disable") == 0)
{
part_emulation_disable (chain, chain->active_part);
}
else if (strcmp (params[2], "exit") == 0)
{
part_emulation_return (chain, chain->active_part);
part_emulation_disable (chain, chain->active_part);
}
else if (strcmp (params[2], "status") == 0)
{
uint16_t dbgstat, excause;
const char *str_excause;
urj_part_t *part;
part_dbgstat_get (chain, chain->active_part);
part = chain->parts->parts[chain->active_part];
dbgstat = BFIN_PART_DBGSTAT (part);
excause = part_dbgstat_emucause (chain, chain->active_part);
switch (excause)
{
case 0x0: str_excause = "EMUEXCPT was executed"; break;
case 0x1: str_excause = "EMUIN pin was asserted"; break;
case 0x2: str_excause = "Watchpoint event occurred"; break;
case 0x4: str_excause = "Performance Monitor 0 overflowed"; break;
case 0x5: str_excause = "Performance Monitor 1 overflowed"; break;
case 0x8: str_excause = "Emulation single step"; break;
default: str_excause = "Reserved??"; break;
}
urj_log (URJ_LOG_LEVEL_NORMAL, "Core [%d] DBGSTAT = 0x%"PRIx16"\n",
chain->active_part, dbgstat);
urj_log (URJ_LOG_LEVEL_NORMAL,
"\tEMUDOF = %u\n"
"\tEMUDIF = %u\n"
"\tEMUDOOVF = %u\n"
"\tEMUDIOVF = %u\n"
"\tEMUREADY = %u\n"
"\tEMUACK = %u\n"
"\tEMUCAUSE = 0x%x (%s)\n"
"\tBIST_DONE = %u\n"
"\tLPDEC0 = %u\n"
"\tIN_RESET = %u\n"
"\tIDLE = %u\n"
"\tCORE_FAULT = %u\n"
"\tLPDEC1 = %u\n",
part_dbgstat_is_emudof (chain, chain->active_part),
part_dbgstat_is_emudif (chain, chain->active_part),
part_dbgstat_is_emudoovf (chain, chain->active_part),
part_dbgstat_is_emudiovf (chain, chain->active_part),
part_dbgstat_is_emuready (chain, chain->active_part),
part_dbgstat_is_emuack (chain, chain->active_part),
excause, str_excause,
part_dbgstat_is_bist_done (chain, chain->active_part),
part_dbgstat_is_lpdec0 (chain, chain->active_part),
part_dbgstat_is_in_reset (chain, chain->active_part),
part_dbgstat_is_idle (chain, chain->active_part),
part_dbgstat_is_core_fault (chain, chain->active_part),
part_dbgstat_is_lpdec1 (chain, chain->active_part));
}
else if (strcmp (params[2], "singlestep") == 0)
{
part_dbgstat_get (chain, chain->active_part);
if (!part_dbgstat_is_emuready (chain, chain->active_part))
{
urj_error_set (URJ_ERROR_BFIN, "Run '%s' first",
"bfin emulation enter");
return URJ_STATUS_FAIL;
}
/* TODO Allow an argument to specify how many single steps. */
part_scan_select (chain, chain->active_part, DBGCTL_SCAN);
part_dbgctl_bit_set_esstep (chain, chain->active_part);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
part_emuir_set (chain, chain->active_part, INSN_RTE, URJ_CHAIN_EXITMODE_IDLE);
part_scan_select (chain, chain->active_part, DBGCTL_SCAN);
part_dbgctl_bit_clear_esstep (chain, chain->active_part);
urj_tap_chain_shift_data_registers_mode (chain, 0, 1, URJ_CHAIN_EXITMODE_UPDATE);
}
else
{
urj_error_set (URJ_ERROR_BFIN,
"unknown emulation subcommand '%s'", params[2]);
return URJ_STATUS_FAIL;
}
return URJ_STATUS_OK;
}
else if (strcmp (params[1], "execute") == 0)
{
int execute_ret = URJ_STATUS_FAIL;
part_dbgstat_get (chain, chain->active_part);
if (!part_dbgstat_is_emuready (chain, chain->active_part))
{
urj_error_set (URJ_ERROR_BFIN, "Run '%s' first",
"bfin emulation enter");
return URJ_STATUS_FAIL;
}
if (num_params > 2)
{
int i;
struct bfin_insn *insns = NULL;
struct bfin_insn **last = &insns;
char tmp[8];
char *tmpfile = NULL;
for (i = 2; i < num_params; i++)
{
if (params[i][0] == '[' && params[i][1] == '0')
{
uint64_t n;
if (sscanf (params[i], "[0%[xX]%"PRIx64"]", tmp, &n) != 2)
goto execute_cleanup;
*last = (struct bfin_insn *) malloc (sizeof (struct bfin_insn));
if (*last == NULL)
goto execute_cleanup;
(*last)->i = n;
(*last)->type = BFIN_INSN_SET_EMUDAT;
(*last)->next = NULL;
last = &((*last)->next);
}
else if (params[i][0] == '0')
{
uint64_t n;
if (sscanf (params[i], "0%[xX]%"PRIx64, tmp, &n) != 2)
goto execute_cleanup;
*last = (struct bfin_insn *) malloc (sizeof (struct bfin_insn));
if (*last == NULL)
goto execute_cleanup;
(*last)->i = n;
(*last)->type = BFIN_INSN_NORMAL;
(*last)->next = NULL;
last = &((*last)->next);
}
else
{
#ifndef HAVE_SYS_WAIT_H
urj_error_set (URJ_ERROR_BFIN,
"Sorry, dynamic code not available for your platform");
goto execute_cleanup;
#else
unsigned char raw_insn[4];
char *tmp_buf;
char *tuples[] = {"uclinux", "linux-uclibc", "elf"};
size_t t;
FILE *fp;
/* 1024 should be plenty. */
char insns_string[1024];
char *p = insns_string;
for (; i < num_params; i++)
{
p += snprintf (p, sizeof (insns_string) - (p - insns_string),
"%s ", params[i]);
if (params[i][strlen (params[i]) - 1] == '"')
break;
if (params[i][strlen (params[i]) - 1] == ';')
break;
}
if (i == num_params)
{
urj_error_set (URJ_ERROR_BFIN,
"unbalanced double quotes");
goto execute_cleanup;
}
/* p points past the '\0'. p - 1 points to the ending '\0'.
p - 2 points to the last double quote. */
*(p - 2) = ';';
if (insns_string[0] == '"')
insns_string[0] = ' ';
/* HRM states that branches and hardware loop setup results
in undefined behavior. Should check opcode instead? */
if (strcasestr(insns_string, "jump") ||
strcasestr(insns_string, "call") ||
strcasestr(insns_string, "lsetup"))
urj_warning (_("jump/call/lsetup insns may not work in emulation\n"));
/* get a temporary file to work with -- a little racy */
if (!tmpfile)
{
tmpfile = tmpnam (NULL);
if (!tmpfile)
goto execute_cleanup;
tmpfile = strdup (tmpfile);
if (!tmpfile)
goto execute_cleanup;
}
/* try to find a toolchain in $PATH */
for (t = 0; t < ARRAY_SIZE(tuples); ++t)
{
int ret;
/* TODO Pass -mcpu= to gas. */
ret = asprintf (&tmp_buf,
"bfin-%3$s-as --version >/dev/null 2>&1 || exit $?;"
"echo '%1$s' | bfin-%3$s-as - -o \"%2$s\""
" && bfin-%3$s-objcopy -O binary \"%2$s\"",
insns_string, tmpfile, tuples[t]);
if (ret == -1)
{
urj_error_set (URJ_ERROR_OUT_OF_MEMORY, _("asprintf() failed"));
goto execute_cleanup;
}
ret = system (tmp_buf);
free (tmp_buf);
if (WIFEXITED(ret))
{
if (WEXITSTATUS(ret) == 0)
break;
/* 127 -> not found in $PATH */
else if (WEXITSTATUS(ret) == 127)
continue;
else
{
urj_error_set (URJ_ERROR_BFIN, "GAS failed parsing: %s",
insns_string);
goto execute_cleanup;
}
}
}
if (t == ARRAY_SIZE(tuples))
{
urj_error_set (URJ_ERROR_BFIN,
"unable to find Blackfin toolchain in $PATH\n");
goto execute_cleanup;
}
/* Read the binary blob from the toolchain */
fp = fopen (tmpfile, FOPEN_R);
if (fp == NULL)
goto execute_cleanup;
/* Figure out how many instructions there are */
t = 0;
p = insns_string;
while ((p = strchr(p, ';')) != NULL)
{
++t;
++p;
}
while (t-- && fread (raw_insn, 1, 2, fp) == 2)
{
uint16_t iw = raw_insn[0] | (raw_insn[1] << 8);
uint64_t n = iw;
int is_multiinsn = INSN_IS_MULTI (raw_insn[1]);
if ((iw & 0xf000) >= 0xc000)
{
if (fread (raw_insn, 1, 2, fp) != 2)
goto execute_cleanup;
iw = raw_insn[0] | (raw_insn[1] << 8);
n = (n << 16) | iw;
}
if (is_multiinsn)
{
if (fread (raw_insn, 1, 4, fp) != 4)
goto execute_cleanup;
n = (n << 32)
| ((uint64_t)raw_insn[0] << 16)
| ((uint64_t)raw_insn[1] << 24)
| raw_insn[2] | (raw_insn[3] << 8);
}
*last = (struct bfin_insn *) malloc (sizeof (struct bfin_insn));
if (*last == NULL)
goto execute_cleanup;
(*last)->i = n;
(*last)->type = BFIN_INSN_NORMAL;
(*last)->next = NULL;
last = &((*last)->next);
}
fclose (fp);
#endif
}
}
part_execute_instructions (chain, chain->active_part, insns);
execute_ret = URJ_STATUS_OK;
execute_cleanup:
if (tmpfile)
{
unlink (tmpfile);
free (tmpfile);
}
while (insns)
{
struct bfin_insn *tmp = insns->next;
free (insns);
insns = tmp;
}
}
if (execute_ret == URJ_STATUS_OK)
{
uint64_t emudat;
emudat = part_emudat_get (chain, chain->active_part, URJ_CHAIN_EXITMODE_UPDATE);
urj_log (URJ_LOG_LEVEL_NORMAL, "EMUDAT = 0x%"PRIx64"\n", emudat);
part_dbgstat_get (chain, chain->active_part);
if (part_dbgstat_is_core_fault (chain, chain->active_part))
urj_warning (_("core fault detected\n"));
}
return execute_ret;
}
else if (strcmp (params[1], "reset") == 0)
{
int reset_what = 0;
part_dbgstat_get (chain, chain->active_part);
if (!part_dbgstat_is_emuready (chain, chain->active_part))
{
urj_error_set (URJ_ERROR_BFIN, "Run '%s' first",
"bfin emulation enter");
return URJ_STATUS_FAIL;
}
if (num_params == 3)
{
if (!strcmp (params[2], "core"))
reset_what |= 0x1;
else if (!strcmp (params[2], "system"))
reset_what |= 0x2;
else
{
urj_error_set (URJ_ERROR_BFIN, "bad parameter '%s'", params[2]);
return URJ_STATUS_FAIL;
}
}
else if (num_params == 2)
reset_what = 0x1 | 0x2;
else
{
urj_error_set (URJ_ERROR_BFIN,
"'bfin emulation' requires 0 or 1 parameter, not %d",
num_params - 2);
return URJ_STATUS_FAIL;
}
urj_log (URJ_LOG_LEVEL_NORMAL,
_("%s: reseting processor ... "), "bfin");
fflush (stdout);
if (reset_what == 0x3)
software_reset (chain, chain->active_part);
else if (reset_what & 0x1)
bfin_core_reset (chain, chain->active_part);
else if (reset_what & 0x2)
chain_system_reset (chain);
urj_log (URJ_LOG_LEVEL_NORMAL, _("OK\n"));
return URJ_STATUS_OK;
}
else
{
urj_error_set (URJ_ERROR_BFIN,
"unknown command '%s'", params[1]);
return URJ_STATUS_FAIL;
}
return URJ_STATUS_OK;
}
