void
pckbdattach(device_t parent, device_t self, void *aux)
{
struct pckbd_softc *sc = device_private(self);
struct pckbport_attach_args *pa = aux;
struct wskbddev_attach_args a;
int isconsole;
u_char cmd[1];
aprint_naive("\n");
aprint_normal("\n");
sc->sc_dev = self;
isconsole = pckbd_is_console(pa->pa_tag, pa->pa_slot);
if (isconsole) {
sc->id = &pckbd_consdata;
/*
* Some keyboards are not enabled after a reset,
* so make sure it is enabled now.
*/
cmd[0] = KBC_ENABLE;
(void) pckbport_poll_cmd(sc->id->t_kbctag, sc->id->t_kbcslot,
cmd, 1, 0, 0, 0);
sc->sc_enabled = 1;
} else {
sc->id = malloc(sizeof(struct pckbd_internal),
M_DEVBUF, M_WAITOK);
(void) pckbd_init(sc->id, pa->pa_tag, pa->pa_slot, 0);
/* no interrupts until enabled */
cmd[0] = KBC_DISABLE;
(void) pckbport_poll_cmd(sc->id->t_kbctag, sc->id->t_kbcslot,
cmd, 1, 0, 0, 0);
sc->sc_enabled = 0;
}
sc->id->t_sc = sc;
pckbport_set_inputhandler(sc->id->t_kbctag, sc->id->t_kbcslot,
pckbd_input, sc, device_xname(sc->sc_dev));
a.console = isconsole;
a.keymap = &pckbd_keymapdata;
a.accessops = &pckbd_accessops;
a.accesscookie = sc;
if (!pmf_device_register(self, pckbd_suspend, pckbd_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
/*
* Attach the wskbd, saving a handle to it.
* XXX XXX XXX
*/
sc->sc_wskbddev = config_found_ia(self, "wskbddev", &a, wskbddevprint);
}
void
pckbdattach(struct device *parent, struct device *self, void *aux)
{
struct pckbd_softc *sc = (void *)self;
struct pckbport_attach_args *pa = aux;
struct wskbddev_attach_args a;
int isconsole;
u_char cmd[1];
printf("\n");
isconsole = pckbd_is_console(pa->pa_tag, pa->pa_slot);
if (isconsole) {
sc->id = &pckbd_consdata;
/*
* Some keyboards are not enabled after a reset,
* so make sure it is enabled now.
*/
cmd[0] = KBC_ENABLE;
(void) pckbport_poll_cmd(sc->id->t_kbctag, sc->id->t_kbcslot,
cmd, 1, 0, 0, 0);
sc->sc_enabled = 1;
} else {
sc->id = malloc(sizeof(struct pckbd_internal),
M_DEVBUF, M_WAITOK);
(void) pckbd_init(sc->id, pa->pa_tag, pa->pa_slot, 0);
/* no interrupts until enabled */
cmd[0] = KBC_DISABLE;
(void) pckbport_poll_cmd(sc->id->t_kbctag, sc->id->t_kbcslot,
cmd, 1, 0, 0, 0);
sc->sc_enabled = 0;
}
sc->id->t_sc = sc;
pckbport_set_inputhandler(sc->id->t_kbctag, sc->id->t_kbcslot,
pckbd_input, sc, sc->sc_dev.dv_xname);
a.console = isconsole;
a.keymap = &pckbd_keymapdata;
a.accessops = &pckbd_accessops;
a.accesscookie = sc;
/*
* Attach the wskbd, saving a handle to it.
* XXX XXX XXX
*/
sc->sc_wskbddev = config_found(self, &a, wskbddevprint);
}
void
pmsattach(device_t parent, device_t self, void *aux)
{
struct pms_softc *sc = device_private(self);
struct pckbport_attach_args *pa = aux;
struct wsmousedev_attach_args a;
u_char cmd[2], resp[2];
int res;
sc->sc_dev = self;
sc->sc_kbctag = pa->pa_tag;
sc->sc_kbcslot = pa->pa_slot;
aprint_naive("\n");
aprint_normal("\n");
/* Flush any garbage. */
pckbport_flush(pa->pa_tag, pa->pa_slot);
/* reset the device */
cmd[0] = PMS_RESET;
res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1);
if (res || resp[0] != PMS_RSTDONE || resp[1] != 0) {
aprint_debug("pmsattach: reset error\n");
return;
}
sc->inputstate = 0;
sc->buttons = 0;
sc->protocol = PMS_UNKNOWN;
#ifdef PMS_SYNAPTICS_TOUCHPAD
/* Probe for synaptics touchpad. */
if (pms_synaptics_probe_init(sc) == 0) {
sc->protocol = PMS_SYNAPTICS;
} else
#endif
#ifdef PMS_ELANTECH_TOUCHPAD
if (pms_elantech_probe_init(sc) == 0) {
sc->protocol = PMS_ELANTECH;
} else
#endif
/* Install generic handler. */
pckbport_set_inputhandler(sc->sc_kbctag, sc->sc_kbcslot,
pmsinput, sc, device_xname(sc->sc_dev));
a.accessops = &pms_accessops;
a.accesscookie = sc;
/*
* Attach the wsmouse, saving a handle to it.
* Note that we don't need to check this pointer against NULL
* here or in pmsintr, because if this fails pms_enable() will
* never be called, so pmsinput() will never be called.
*/
sc->sc_wsmousedev = config_found_ia(self, "wsmousedev", &a, wsmousedevprint);
/* no interrupts until enabled */
cmd[0] = PMS_DEV_DISABLE;
res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 0, 0, 0);
if (res)
aprint_error("pmsattach: disable error\n");
pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 0);
kthread_create(PRI_NONE, 0, NULL, pms_reset_thread, sc,
&sc->sc_event_thread, device_xname(sc->sc_dev));
#ifndef PMS_DISABLE_POWERHOOK
sc->sc_suspended = 0;
#endif
if (!pmf_device_register(self, pms_suspend, pms_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
}
