static void rtc_periodic_timer(void *opaque)
{
RTCState *s = opaque;
periodic_timer_update(s, s->next_periodic_time);
s->cmos_data[RTC_REG_C] |= REG_C_PF;
if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
#ifdef TARGET_I386
if (s->lost_tick_policy == LOST_TICK_SLEW) {
if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
s->irq_reinject_on_ack_count = 0;
apic_reset_irq_delivered();
qemu_irq_raise(s->irq);
if (!apic_get_irq_delivered()) {
s->irq_coalesced++;
rtc_coalesced_timer_update(s);
DPRINTF_C("cmos: coalesced irqs increased to %d\n",
s->irq_coalesced);
}
} else
#endif
qemu_irq_raise(s->irq);
}
if (s->cmos_data[RTC_REG_B] & REG_B_SQWE) {
/* Not square wave at all but we don't want 2048Hz interrupts!
Must be seen as a pulse. */
qemu_irq_raise(s->sqw_irq);
}
}
static void rtc_periodic_timer(void *opaque)
{
RTCState *s = opaque;
periodic_timer_update(s, s->next_periodic_time);
s->cmos_data[RTC_REG_C] |= REG_C_PF;
if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
#ifdef TARGET_I386
if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
s->irq_reinject_on_ack_count = 0;
apic_reset_irq_delivered();
qemu_irq_raise(s->irq);
if (!apic_get_irq_delivered()) {
s->irq_coalesced++;
rtc_coalesced_timer_update(s);
DPRINTF_C("cmos: coalesced irqs increased to %d\n",
s->irq_coalesced);
}
} else
#endif
qemu_irq_raise(s->irq);
}
}
static void rtc_notify_clock_reset(Notifier *notifier, void *data)
{
RTCState *s = container_of(notifier, RTCState, clock_reset_notifier);
int64_t now = *(int64_t *)data;
rtc_set_date_from_host(ISA_DEVICE(s));
periodic_timer_update(s, now);
check_update_timer(s);
#ifdef TARGET_I386
if (s->lost_tick_policy == LOST_TICK_SLEW) {
rtc_coalesced_timer_update(s);
}
#endif
}
static void cmos_ioport_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
RTCState *s = opaque;
if ((addr & 1) == 0) {
s->cmos_index = data & 0x7f;
} else {
CMOS_DPRINTF("cmos: write index=0x%02x val=0x%02x\n",
s->cmos_index, data);
switch(s->cmos_index) {
case RTC_SECONDS_ALARM:
case RTC_MINUTES_ALARM:
case RTC_HOURS_ALARM:
s->cmos_data[s->cmos_index] = data;
check_update_timer(s);
break;
case RTC_IBM_PS2_CENTURY_BYTE:
s->cmos_index = RTC_CENTURY;
/* fall through */
case RTC_CENTURY:
case RTC_SECONDS:
case RTC_MINUTES:
case RTC_HOURS:
case RTC_DAY_OF_WEEK:
case RTC_DAY_OF_MONTH:
case RTC_MONTH:
case RTC_YEAR:
s->cmos_data[s->cmos_index] = data;
/* if in set mode, do not update the time */
if (rtc_running(s)) {
rtc_set_time(s);
check_update_timer(s);
}
break;
case RTC_REG_A:
if ((data & 0x60) == 0x60) {
if (rtc_running(s)) {
rtc_update_time(s);
}
/* What happens to UIP when divider reset is enabled is
* unclear from the datasheet. Shouldn't matter much
* though.
*/
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
} else if (((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) &&
(data & 0x70) <= 0x20) {
/* when the divider reset is removed, the first update cycle
* begins one-half second later*/
if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
s->offset = 500000000;
rtc_set_time(s);
}
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
}
/* UIP bit is read only */
s->cmos_data[RTC_REG_A] = (data & ~REG_A_UIP) |
(s->cmos_data[RTC_REG_A] & REG_A_UIP);
periodic_timer_update(s, qemu_get_clock_ns(rtc_clock));
check_update_timer(s);
break;
case RTC_REG_B:
if (data & REG_B_SET) {
/* update cmos to when the rtc was stopping */
if (rtc_running(s)) {
rtc_update_time(s);
}
/* set mode: reset UIP mode */
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
data &= ~REG_B_UIE;
} else {
/* if disabling set mode, update the time */
if ((s->cmos_data[RTC_REG_B] & REG_B_SET) &&
(s->cmos_data[RTC_REG_A] & 0x70) <= 0x20) {
s->offset = get_guest_rtc_ns(s) % NSEC_PER_SEC;
rtc_set_time(s);
}
}
/* if an interrupt flag is already set when the interrupt
* becomes enabled, raise an interrupt immediately. */
if (data & s->cmos_data[RTC_REG_C] & REG_C_MASK) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
qemu_irq_raise(s->irq);
} else {
s->cmos_data[RTC_REG_C] &= ~REG_C_IRQF;
qemu_irq_lower(s->irq);
}
s->cmos_data[RTC_REG_B] = data;
periodic_timer_update(s, qemu_get_clock_ns(rtc_clock));
check_update_timer(s);
break;
case RTC_REG_C:
case RTC_REG_D:
/* cannot write to them */
break;
default:
s->cmos_data[s->cmos_index] = data;
break;
}
}
}
