static void
copy_to_hw_buffer(struct weston_output *output, pixman_region32_t *region)
{
struct pixman_output_state *po = get_output_state(output);
pixman_region32_t output_region;
pixman_region32_init(&output_region);
pixman_region32_copy(&output_region, region);
region_global_to_output(output, &output_region);
pixman_image_set_clip_region32 (po->hw_buffer, &output_region);
pixman_image_composite32(PIXMAN_OP_SRC,
po->shadow_image, /* src */
NULL /* mask */,
po->hw_buffer, /* dest */
0, 0, /* src_x, src_y */
0, 0, /* mask_x, mask_y */
0, 0, /* dest_x, dest_y */
pixman_image_get_width (po->hw_buffer), /* width */
pixman_image_get_height (po->hw_buffer) /* height */);
pixman_image_set_clip_region32 (po->hw_buffer, NULL);
}
static cairo_int_status_t
set_clip_region (cairo_composite_rectangles_t *extents)
{
cairo_image_surface_t *dst = (cairo_image_surface_t *) extents->surface;
cairo_region_t *region = _cairo_clip_get_region (extents->clip);
pixman_region32_t *rgn = region ? ®ion->rgn : NULL;
if (! pixman_image_set_clip_region32 (dst->pixman_image, rgn))
return _cairo_error (CAIRO_STATUS_NO_MEMORY);
return CAIRO_STATUS_SUCCESS;
}
cairo_int_status_t
_cairo_image_surface_set_clip_region (void *abstract_surface,
cairo_region_t *region)
{
cairo_image_surface_t *surface = (cairo_image_surface_t *) abstract_surface;
if (! pixman_image_set_clip_region32 (surface->pixman_image, ®ion->rgn))
return _cairo_error (CAIRO_STATUS_NO_MEMORY);
surface->has_clip = region != NULL;
return CAIRO_STATUS_SUCCESS;
}
int
main ()
{
pixman_region32_t r1;
pixman_region32_t r2;
pixman_region32_t r3;
pixman_box32_t boxes[] = {
{ 10, 10, 20, 20 },
{ 30, 30, 30, 40 },
{ 50, 45, 60, 44 },
};
pixman_box32_t boxes2[] = {
{ 2, 6, 7, 6 },
{ 4, 1, 6, 7 },
};
pixman_box32_t boxes3[] = {
{ 2, 6, 7, 6 },
{ 4, 1, 6, 1 },
};
int i, j;
pixman_box32_t *b;
pixman_image_t *image, *fill;
pixman_color_t white = {
0xffff,
0xffff,
0xffff,
0xffff
};
/* This used to go into an infinite loop before pixman-region.c
* was fixed to not use explict "short" variables
*/
pixman_region32_init_rect (&r1, 0, 0, 20, 64000);
pixman_region32_init_rect (&r2, 0, 0, 20, 64000);
pixman_region32_init_rect (&r3, 0, 0, 20, 64000);
pixman_region32_subtract (&r1, &r2, &r3);
/* This would produce a region containing an empty
* rectangle in it. Such regions are considered malformed,
* but using an empty rectangle for initialization should
* work.
*/
pixman_region32_init_rects (&r1, boxes, 3);
b = pixman_region32_rectangles (&r1, &i);
assert (i == 1);
while (i--)
{
assert (b[i].x1 < b[i].x2);
assert (b[i].y1 < b[i].y2);
}
/* This would produce a rectangle containing the bounding box
* of the two rectangles. The correct result is to eliminate
* the broken rectangle.
*/
pixman_region32_init_rects (&r1, boxes2, 2);
b = pixman_region32_rectangles (&r1, &i);
assert (i == 1);
assert (b[0].x1 == 4);
assert (b[0].y1 == 1);
assert (b[0].x2 == 6);
assert (b[0].y2 == 7);
/* This should produce an empty region */
pixman_region32_init_rects (&r1, boxes3, 2);
b = pixman_region32_rectangles (&r1, &i);
assert (i == 0);
fill = pixman_image_create_solid_fill (&white);
for (i = 0; i < 100; i++)
{
int image_size = 128;
pixman_region32_init (&r1);
/* Add some random rectangles */
for (j = 0; j < 64; j++)
pixman_region32_union_rect (&r1, &r1,
lcg_rand_n (image_size),
lcg_rand_n (image_size),
lcg_rand_n (25),
lcg_rand_n (25));
/* Clip to image size */
pixman_region32_init_rect (&r2, 0, 0, image_size, image_size);
pixman_region32_intersect (&r1, &r1, &r2);
pixman_region32_fini (&r2);
/* render region to a1 mask */
image = pixman_image_create_bits (PIXMAN_a1, image_size, image_size, NULL, 0);
pixman_image_set_clip_region32 (image, &r1);
pixman_image_composite32 (PIXMAN_OP_SRC,
fill, NULL, image,
0, 0, 0, 0, 0, 0,
image_size, image_size);
pixman_region32_init_from_image (&r2, image);
pixman_image_unref (image);
assert (pixman_region32_equal (&r1, &r2));
pixman_region32_fini (&r1);
pixman_region32_fini (&r2);
}
pixman_image_unref (fill);
return 0;
}
static void
repaint_region(struct weston_view *ev, struct weston_output *output,
pixman_region32_t *region, pixman_region32_t *surf_region,
pixman_op_t pixman_op)
{
struct pixman_renderer *pr =
(struct pixman_renderer *) output->compositor->renderer;
struct pixman_surface_state *ps = get_surface_state(ev->surface);
struct pixman_output_state *po = get_output_state(output);
pixman_region32_t final_region;
float view_x, view_y;
pixman_transform_t transform;
pixman_fixed_t fw, fh;
/* The final region to be painted is the intersection of
* 'region' and 'surf_region'. However, 'region' is in the global
* coordinates, and 'surf_region' is in the surface-local
* coordinates
*/
pixman_region32_init(&final_region);
if (surf_region) {
pixman_region32_copy(&final_region, surf_region);
/* Convert from surface to global coordinates */
if (!ev->transform.enabled) {
pixman_region32_translate(&final_region, ev->geometry.x, ev->geometry.y);
} else {
weston_view_to_global_float(ev, 0, 0, &view_x, &view_y);
pixman_region32_translate(&final_region, (int)view_x, (int)view_y);
}
/* We need to paint the intersection */
pixman_region32_intersect(&final_region, &final_region, region);
} else {
/* If there is no surface region, just use the global region */
pixman_region32_copy(&final_region, region);
}
/* Convert from global to output coord */
region_global_to_output(output, &final_region);
/* And clip to it */
pixman_image_set_clip_region32 (po->shadow_image, &final_region);
/* Set up the source transformation based on the surface
position, the output position/transform/scale and the client
specified buffer transform/scale */
pixman_transform_init_identity(&transform);
pixman_transform_scale(&transform, NULL,
pixman_double_to_fixed ((double)1.0/output->current_scale),
pixman_double_to_fixed ((double)1.0/output->current_scale));
fw = pixman_int_to_fixed(output->width);
fh = pixman_int_to_fixed(output->height);
switch (output->transform) {
default:
case WL_OUTPUT_TRANSFORM_NORMAL:
case WL_OUTPUT_TRANSFORM_FLIPPED:
break;
case WL_OUTPUT_TRANSFORM_90:
case WL_OUTPUT_TRANSFORM_FLIPPED_90:
pixman_transform_rotate(&transform, NULL, 0, -pixman_fixed_1);
pixman_transform_translate(&transform, NULL, 0, fh);
break;
case WL_OUTPUT_TRANSFORM_180:
case WL_OUTPUT_TRANSFORM_FLIPPED_180:
pixman_transform_rotate(&transform, NULL, -pixman_fixed_1, 0);
pixman_transform_translate(&transform, NULL, fw, fh);
break;
case WL_OUTPUT_TRANSFORM_270:
case WL_OUTPUT_TRANSFORM_FLIPPED_270:
pixman_transform_rotate(&transform, NULL, 0, pixman_fixed_1);
pixman_transform_translate(&transform, NULL, fw, 0);
break;
}
switch (output->transform) {
case WL_OUTPUT_TRANSFORM_FLIPPED:
case WL_OUTPUT_TRANSFORM_FLIPPED_90:
case WL_OUTPUT_TRANSFORM_FLIPPED_180:
case WL_OUTPUT_TRANSFORM_FLIPPED_270:
pixman_transform_scale(&transform, NULL,
pixman_int_to_fixed (-1),
pixman_int_to_fixed (1));
pixman_transform_translate(&transform, NULL, fw, 0);
break;
}
pixman_transform_translate(&transform, NULL,
pixman_double_to_fixed (output->x),
pixman_double_to_fixed (output->y));
if (ev->transform.enabled) {
/* Pixman supports only 2D transform matrix, but Weston uses 3D,
* so we're omitting Z coordinate here
*/
pixman_transform_t surface_transform = {{
{ D2F(ev->transform.matrix.d[0]),
D2F(ev->transform.matrix.d[4]),
D2F(ev->transform.matrix.d[12]),
},
{ D2F(ev->transform.matrix.d[1]),
D2F(ev->transform.matrix.d[5]),
D2F(ev->transform.matrix.d[13]),
},
{ D2F(ev->transform.matrix.d[3]),
D2F(ev->transform.matrix.d[7]),
D2F(ev->transform.matrix.d[15]),
}
}};
pixman_transform_invert(&surface_transform, &surface_transform);
pixman_transform_multiply (&transform, &surface_transform, &transform);
} else {
pixman_transform_translate(&transform, NULL,
pixman_double_to_fixed ((double)-ev->geometry.x),
pixman_double_to_fixed ((double)-ev->geometry.y));
}
if (ev->surface->buffer_viewport.scaler_set) {
double scaler_x, scaler_y, scaler_width, scaler_height;
double ratio_x, ratio_y;
scaler_x = wl_fixed_to_double(ev->surface->buffer_viewport.src_x);
scaler_y = wl_fixed_to_double(ev->surface->buffer_viewport.src_y);
scaler_width = wl_fixed_to_double(ev->surface->buffer_viewport.src_width);
scaler_height = wl_fixed_to_double(ev->surface->buffer_viewport.src_height);
ratio_x = scaler_width / ev->surface->buffer_viewport.dst_width;
ratio_y = scaler_height / ev->surface->buffer_viewport.dst_height;
pixman_transform_scale(&transform, NULL,
pixman_double_to_fixed(ratio_x),
pixman_double_to_fixed(ratio_y));
pixman_transform_translate(&transform, NULL, pixman_double_to_fixed(scaler_x),
pixman_double_to_fixed(scaler_y));
}
pixman_transform_scale(&transform, NULL,
pixman_double_to_fixed(ev->surface->buffer_viewport.scale),
pixman_double_to_fixed(ev->surface->buffer_viewport.scale));
fw = pixman_int_to_fixed(pixman_image_get_width(ps->image));
fh = pixman_int_to_fixed(pixman_image_get_height(ps->image));
switch (ev->surface->buffer_viewport.transform) {
case WL_OUTPUT_TRANSFORM_FLIPPED:
case WL_OUTPUT_TRANSFORM_FLIPPED_90:
case WL_OUTPUT_TRANSFORM_FLIPPED_180:
case WL_OUTPUT_TRANSFORM_FLIPPED_270:
pixman_transform_scale(&transform, NULL,
pixman_int_to_fixed (-1),
pixman_int_to_fixed (1));
pixman_transform_translate(&transform, NULL, fw, 0);
break;
}
switch (ev->surface->buffer_viewport.transform) {
default:
case WL_OUTPUT_TRANSFORM_NORMAL:
case WL_OUTPUT_TRANSFORM_FLIPPED:
break;
case WL_OUTPUT_TRANSFORM_90:
case WL_OUTPUT_TRANSFORM_FLIPPED_90:
pixman_transform_rotate(&transform, NULL, 0, pixman_fixed_1);
pixman_transform_translate(&transform, NULL, fh, 0);
break;
case WL_OUTPUT_TRANSFORM_180:
case WL_OUTPUT_TRANSFORM_FLIPPED_180:
pixman_transform_rotate(&transform, NULL, -pixman_fixed_1, 0);
pixman_transform_translate(&transform, NULL, fw, fh);
break;
case WL_OUTPUT_TRANSFORM_270:
case WL_OUTPUT_TRANSFORM_FLIPPED_270:
pixman_transform_rotate(&transform, NULL, 0, -pixman_fixed_1);
pixman_transform_translate(&transform, NULL, 0, fw);
break;
}
pixman_image_set_transform(ps->image, &transform);
if (ev->transform.enabled || output->current_scale != ev->surface->buffer_viewport.scale)
pixman_image_set_filter(ps->image, PIXMAN_FILTER_BILINEAR, NULL, 0);
else
pixman_image_set_filter(ps->image, PIXMAN_FILTER_NEAREST, NULL, 0);
if (ps->buffer_ref.buffer)
wl_shm_buffer_begin_access(ps->buffer_ref.buffer->shm_buffer);
pixman_image_composite32(pixman_op,
ps->image, /* src */
NULL /* mask */,
po->shadow_image, /* dest */
0, 0, /* src_x, src_y */
0, 0, /* mask_x, mask_y */
0, 0, /* dest_x, dest_y */
pixman_image_get_width (po->shadow_image), /* width */
pixman_image_get_height (po->shadow_image) /* height */);
if (ps->buffer_ref.buffer)
wl_shm_buffer_end_access(ps->buffer_ref.buffer->shm_buffer);
if (pr->repaint_debug)
pixman_image_composite32(PIXMAN_OP_OVER,
pr->debug_color, /* src */
NULL /* mask */,
po->shadow_image, /* dest */
0, 0, /* src_x, src_y */
0, 0, /* mask_x, mask_y */
0, 0, /* dest_x, dest_y */
pixman_image_get_width (po->shadow_image), /* width */
pixman_image_get_height (po->shadow_image) /* height */);
pixman_image_set_clip_region32 (po->shadow_image, NULL);
pixman_region32_fini(&final_region);
}
/** Paint an intersected region
*
* \param ev The view to be painted.
* \param output The output being painted.
* \param repaint_output The region to be painted in output coordinates.
* \param source_clip The region of the source image to use, in source image
* coordinates. If NULL, use the whole source image.
* \param pixman_op Compositing operator, either SRC or OVER.
*/
static void
repaint_region(struct weston_view *ev, struct weston_output *output,
pixman_region32_t *repaint_output,
pixman_region32_t *source_clip,
pixman_op_t pixman_op)
{
struct pixman_renderer *pr =
(struct pixman_renderer *) output->compositor->renderer;
struct pixman_surface_state *ps = get_surface_state(ev->surface);
struct pixman_output_state *po = get_output_state(output);
struct weston_buffer_viewport *vp = &ev->surface->buffer_viewport;
pixman_transform_t transform;
pixman_filter_t filter;
pixman_image_t *mask_image;
pixman_color_t mask = { 0, };
/* Clip rendering to the damaged output region */
pixman_image_set_clip_region32(po->shadow_image, repaint_output);
pixman_renderer_compute_transform(&transform, ev, output);
if (ev->transform.enabled || output->current_scale != vp->buffer.scale)
filter = PIXMAN_FILTER_BILINEAR;
else
filter = PIXMAN_FILTER_NEAREST;
if (ps->buffer_ref.buffer)
wl_shm_buffer_begin_access(ps->buffer_ref.buffer->shm_buffer);
if (ev->alpha < 1.0) {
mask.alpha = 0xffff * ev->alpha;
mask_image = pixman_image_create_solid_fill(&mask);
} else {
mask_image = NULL;
}
if (source_clip)
composite_clipped(ps->image, mask_image, po->shadow_image,
&transform, filter, source_clip);
else
composite_whole(pixman_op, ps->image, mask_image,
po->shadow_image, &transform, filter);
if (mask_image)
pixman_image_unref(mask_image);
if (ps->buffer_ref.buffer)
wl_shm_buffer_end_access(ps->buffer_ref.buffer->shm_buffer);
if (pr->repaint_debug)
pixman_image_composite32(PIXMAN_OP_OVER,
pr->debug_color, /* src */
NULL /* mask */,
po->shadow_image, /* dest */
0, 0, /* src_x, src_y */
0, 0, /* mask_x, mask_y */
0, 0, /* dest_x, dest_y */
pixman_image_get_width (po->shadow_image), /* width */
pixman_image_get_height (po->shadow_image) /* height */);
pixman_image_set_clip_region32 (po->shadow_image, NULL);
}
int
main (int argc, char **argv)
{
pixman_image_t *gradient_img;
pixman_image_t *src_img, *dst_img;
pixman_gradient_stop_t stops[2] =
{
{ pixman_int_to_fixed (0), { 0xffff, 0x0000, 0x0000, 0xffff } },
{ pixman_int_to_fixed (1), { 0xffff, 0xffff, 0x0000, 0xffff } }
};
pixman_point_fixed_t p1 = { 0, 0 };
pixman_point_fixed_t p2 = { pixman_int_to_fixed (WIDTH),
pixman_int_to_fixed (HEIGHT) };
pixman_point_fixed_t c_inner;
pixman_point_fixed_t c_outer;
pixman_fixed_t r_inner;
pixman_fixed_t r_outer;
pixman_region32_t clip_region;
pixman_transform_t trans = {
{ { pixman_double_to_fixed (1.3), pixman_double_to_fixed (0), pixman_double_to_fixed (-0.5), },
{ pixman_double_to_fixed (0), pixman_double_to_fixed (1), pixman_double_to_fixed (-0.5), },
{ pixman_double_to_fixed (0), pixman_double_to_fixed (0), pixman_double_to_fixed (1.0) }
}
};
src_img = create_solid_bits (0xff0000ff);
c_inner.x = pixman_double_to_fixed (100.0);
c_inner.y = pixman_double_to_fixed (100.0);
c_outer.x = pixman_double_to_fixed (100.0);
c_outer.y = pixman_double_to_fixed (100.0);
r_inner = 0;
r_outer = pixman_double_to_fixed (100.0);
gradient_img = pixman_image_create_radial_gradient (&c_inner, &c_outer,
r_inner, r_outer,
stops, 2);
#if 0
gradient_img = pixman_image_create_linear_gradient (&p1, &p2,
stops, 2);
#endif
pixman_image_composite (PIXMAN_OP_OVER, gradient_img, NULL, src_img,
0, 0, 0, 0, 0, 0, WIDTH, HEIGHT);
pixman_region32_init_rect (&clip_region, 50, 0, 100, 200);
pixman_image_set_clip_region32 (src_img, &clip_region);
pixman_image_set_source_clipping (src_img, TRUE);
pixman_image_set_has_client_clip (src_img, TRUE);
pixman_image_set_transform (src_img, &trans);
pixman_image_set_repeat (src_img, PIXMAN_REPEAT_NORMAL);
dst_img = create_solid_bits (0xffff0000);
pixman_image_composite (PIXMAN_OP_OVER, src_img, NULL, dst_img,
0, 0, 0, 0, 0, 0, WIDTH, HEIGHT);
#if 0
printf ("0, 0: %x\n", src[0]);
printf ("10, 10: %x\n", src[10 * 10 + 10]);
printf ("w, h: %x\n", src[(HEIGHT - 1) * 100 + (WIDTH - 1)]);
#endif
show_image (dst_img);
pixman_image_unref (gradient_img);
pixman_image_unref (src_img);
return 0;
}
