void kgsl_pwrctrl_axi(struct kgsl_device *device, int state)
{
struct kgsl_pwrctrl *pwr = &device->pwrctrl;
if (state == KGSL_PWRFLAGS_OFF) {
if (test_and_clear_bit(KGSL_PWRFLAGS_AXI_ON,
&pwr->power_flags)) {
KGSL_PWR_INFO(device,
"axi off, device %d\n", device->id);
if (pwr->ebi1_clk) {
clk_set_rate(pwr->ebi1_clk, 0);
clk_disable(pwr->ebi1_clk);
}
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
"kgsl_3d", PM_QOS_DEFAULT_VALUE);
}
} else if (state == KGSL_PWRFLAGS_ON) {
if (!test_and_set_bit(KGSL_PWRFLAGS_AXI_ON,
&pwr->power_flags)) {
KGSL_PWR_INFO(device,
"axi on, device %d\n", device->id);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
"kgsl_3d", pwr->pwrlevels[pwr->active_pwrlevel].
bus_freq/1000);
if (pwr->ebi1_clk) {
clk_enable(pwr->ebi1_clk);
clk_set_rate(pwr->ebi1_clk,
pwr->pwrlevels[pwr->active_pwrlevel].
bus_freq);
}
}
}
}
static void msm72k_pm_qos_update(int vote)
{
if (vote) {
pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
DRIVER_NAME, 0);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, DRIVER_NAME,
MSM_AXI_MAX_FREQ);
} else {
pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
DRIVER_NAME, PM_QOS_DEFAULT_VALUE);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, DRIVER_NAME,
PM_QOS_DEFAULT_VALUE);
}
}
static int kgsl_last_release_locked(void)
{
BUG_ON(kgsl_driver.grp_clk == NULL);
BUG_ON(kgsl_driver.imem_clk == NULL);
disable_irq(kgsl_driver.interrupt_num);
kgsl_yamato_stop(&kgsl_driver.yamato_device);
/* close devices */
kgsl_yamato_close(&kgsl_driver.yamato_device);
/* shutdown memory apertures */
kgsl_sharedmem_close(&kgsl_driver.shmem);
if (kgsl_driver.grp_pclk)
clk_disable(kgsl_driver.grp_pclk);
clk_disable(kgsl_driver.grp_clk);
clk_disable(kgsl_driver.imem_clk);
max_axi_freq_set = 0;
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, DRIVER_NAME,
PM_QOS_DEFAULT_VALUE);
return 0;
}
static int tovis_qvga_disp_on(struct platform_device *pdev)
{
/* fixed lcd tearing during playing video by bongkyu.kim */
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, "ebi2_lcd",
65000);
if (!disp_initialized)
tovis_qvga_disp_init(pdev);
if (!display_on) {
mdelay(10);
gpio_set_value(102, 0);
mdelay(1);
gpio_set_value(102, 1);
mdelay(5);
display_on = TRUE;
do_tovis_init();
/*
// (d) -> (a)
EBI2_WRITE16C(DISP_CMD_PORT, 0xff); // CSX Falling Edge
EBI2_WRITE16C(DISP_CMD_PORT, 0xff); // CSX Falling Edge
mdelay(5);
EBI2_WRITE16C(DISP_CMD_PORT, 0xff); // CSX Falling Edge
EBI2_WRITE16C(DISP_CMD_PORT, 0xff); // CSX Falling Edge
EBI2_WRITE16C(DISP_CMD_PORT, 0xff); // CSX Falling Edge
EBI2_WRITE16C(DISP_CMD_PORT, 0xff); // CSX Falling Edge
mdelay(10);
*/
}
return 0;
}
static void msm_xusb_pm_qos_update(struct msmusb_hcd *mhcd, int vote)
{
struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
if (vote) {
if (mhcd->pdata->max_axi_khz)
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
(char *)hcd->self.bus_name,
mhcd->pdata->max_axi_khz);
} else {
if (mhcd->pdata->max_axi_khz)
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
(char *) hcd->self.bus_name,
PM_QOS_DEFAULT_VALUE);
}
}
static int dtv_off(struct platform_device *pdev)
{
int ret = 0;
ret = panel_next_off(pdev);
pr_info("%s\n", __func__);
clk_disable(tv_enc_clk);
clk_disable(tv_dac_clk);
clk_disable(hdmi_clk);
if (mdp_tv_clk)
clk_disable(mdp_tv_clk);
if (dtv_pdata && dtv_pdata->lcdc_power_save)
dtv_pdata->lcdc_power_save(0);
if (dtv_pdata && dtv_pdata->lcdc_gpio_config)
ret = dtv_pdata->lcdc_gpio_config(0);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "dtv",
PM_QOS_DEFAULT_VALUE);
return ret;
}
static int lcdc_on(struct platform_device *pdev)
{
int ret = 0;
struct msm_fb_data_type *mfd;
unsigned long panel_pixclock_freq , pm_qos_freq;
mfd = platform_get_drvdata(pdev);
panel_pixclock_freq = mfd->fbi->var.pixclock;
if (panel_pixclock_freq > 58000000)
/* pm_qos_freq should be in Khz */
pm_qos_freq = panel_pixclock_freq / 1000 ;
else
pm_qos_freq = 58000;
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
pm_qos_freq);
mfd = platform_get_drvdata(pdev);
clk_enable(mdp_lcdc_pclk_clk);
clk_enable(mdp_lcdc_pad_pclk_clk);
if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
lcdc_pdata->lcdc_power_save(1);
if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
ret = lcdc_pdata->lcdc_gpio_config(1);
clk_set_rate(mdp_lcdc_pclk_clk, mfd->fbi->var.pixclock);
clk_set_rate(mdp_lcdc_pad_pclk_clk, mfd->fbi->var.pixclock);
mdp_lcdc_pclk_clk_rate = clk_get_rate(mdp_lcdc_pclk_clk);
mdp_lcdc_pad_pclk_clk_rate = clk_get_rate(mdp_lcdc_pad_pclk_clk);
ret = panel_next_on(pdev);
return ret;
}
static int mddi_resume(struct platform_device *pdev)
{
mddi_host_type host_idx = MDDI_HOST_PRIM;
if (!mddi_is_in_suspend)
return 0;
mddi_is_in_suspend = 0;
if (mddi_power_locked)
return 0;
#ifdef CONFIG_SHLCDC_BOARD
if (no_set_power_flag == FALSE) {
shlcdc_api_set_power_mode(SHLCDC_DEV_TYPE_MDDI, SHLCDC_DEV_PWR_ON);
}
#endif
enable_irq(INT_MDDI_PRI);
#ifdef CONFIG_SHLCDC_BOARD
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, "mddi", 117000);
#endif
clk_enable(mddi_clk);
mddi_host_reg_out(PAD_CTL, mddi_pad_ctrl);
if (mddi_host_timer.function)
mddi_host_timer_service(0);
return 0;
}
static int mddi_on(struct platform_device *pdev)
{
int ret = 0;
u32 clk_rate;
struct msm_fb_data_type *mfd;
mfd = platform_get_drvdata(pdev);
if (mddi_pdata && mddi_pdata->mddi_power_save)
mddi_pdata->mddi_power_save(1);
clk_rate = mfd->fbi->var.pixclock;
clk_rate = min(clk_rate, mfd->panel_info.clk_max);
if (mddi_pdata &&
mddi_pdata->mddi_sel_clk &&
mddi_pdata->mddi_sel_clk(&clk_rate))
printk(KERN_ERR
"%s: can't select mddi io clk targate rate = %d\n",
__func__, clk_rate);
if (clk_set_min_rate(mddi_clk, clk_rate) < 0)
printk(KERN_ERR "%s: clk_set_min_rate failed\n",
__func__);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "mddi",
65000);
ret = panel_next_on(pdev);
return ret;
}
void kgsl_pwrctrl_pwrlevel_change(struct kgsl_device *device,
unsigned int new_level)
{
struct kgsl_pwrctrl *pwr = &device->pwrctrl;
if (new_level < (pwr->num_pwrlevels - 1) &&
new_level >= pwr->thermal_pwrlevel &&
new_level != pwr->active_pwrlevel) {
pwr->active_pwrlevel = new_level;
if ((test_bit(KGSL_PWRFLAGS_CLK_ON, &pwr->power_flags)) ||
(device->state == KGSL_STATE_NAP))
clk_set_rate(pwr->grp_clks[0],
pwr->pwrlevels[pwr->active_pwrlevel].
gpu_freq);
if (test_bit(KGSL_PWRFLAGS_AXI_ON, &pwr->power_flags)) {
if (pwr->ebi1_clk)
clk_set_rate(pwr->ebi1_clk,
pwr->pwrlevels[pwr->active_pwrlevel].
bus_freq);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
"kgsl_3d", pwr->pwrlevels[pwr->active_pwrlevel].
bus_freq/1000);
}
KGSL_PWR_WARN(device, "kgsl pwr level changed to %d\n",
pwr->active_pwrlevel);
}
}
/*Resume function*/
static int kgsl_resume(struct platform_device *dev)
{
if (max_axi_freq_set) {
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, DRIVER_NAME,
max_axi_freq);
}
return 0;
}
int update_axi_qos(uint32_t rate)
{
int rc = 0;
rc = pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
MSM_AXI_QOS_NAME, rate);
if (rc < 0)
CDBG("update AXI bus QOS fails. rc = %d\n", rc);
return rc;
}
/*
* Manage the rate of the uart bus clock on pnx
*/
inline unsigned int pnx_serial_pm_qos_up(struct pnx_uart *uart)
{
pm_qos_update_requirement(PM_QOS_PCLK2_THROUGHPUT,
(char *)uart->uart_name, 52);
uart->pm_qos_status=PNX_UART_PM_QOS_UP_FORCE;
return 0;
}
static void msm_xusb_pm_qos_update(struct msmusb_hcd *mhcd, int vote)
{
struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
if (PHY_TYPE(mhcd->pdata->phy_info) == USB_PHY_SERIAL_PMIC)
goto vote_for_axi;
if (!depends_on_axi_freq(mhcd->xceiv))
return;
vote_for_axi:
if (vote) {
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
(char *)hcd->self.bus_name,
MSM_AXI_MAX_FREQ);
} else {
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
(char *) hcd->self.bus_name,
PM_QOS_DEFAULT_VALUE);
}
}
/* MJA patch for uart on TAT */
int pnx_serial_set_activity_detect(struct pnx_uart *uart)
{
int ret;
uart->enable_detection = 0;
/* console activity detection is only available for UART1 */
if ( strcmp(uart->uart_name,"UART1") != 0 )
return 0;
console_uart = uart;
uart->enable_detection = 1;
uart->rx_activity = 0;
uart->tx_activity = 0;
uart->rx_triggered = 0;
uart->tx_triggered = 0;
uart->clock_enable = 0;
INIT_DELAYED_WORK(&(uart->rx_work), rx_timeout_work);
INIT_DELAYED_WORK(&(uart->tx_work), tx_timeout_work);
uart->workqueue = create_singlethread_workqueue("kserd");
if (!(uart->workqueue))
goto irq_free;
wake_lock_init(&(uart->lock), WAKE_LOCK_SUSPEND, "console activity");
if (!tatonuart) {
/* if not in TAT uart */
if (set_irq_type(IRQ_EXTINT(18), IRQ_TYPE_EDGE_BOTH)) {
printk(KERN_WARNING "failed setirq type\n");
goto irq_free;
}
ret = request_irq(IRQ_EXTINT(18),
pnx_serial_rx_activity_detected,
0, " serial (detect)", NULL);
if (ret) {
printk(KERN_WARNING "request_irq failed\n");
goto irq_free;
}
} else {
pm_qos_update_requirement(PM_QOS_PCLK2_THROUGHPUT,
(char *)uart->uart_name, 52);
uart->pm_qos_status=PNX_UART_PM_QOS_UP_XFER;
}
irq_free:
return 0;
}
static int mddi_off(struct platform_device *pdev)
{
int ret = 0;
ret = panel_next_off(pdev);
if (mddi_pdata && mddi_pdata->mddi_power_save)
mddi_pdata->mddi_power_save(0);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "mddi",
PM_QOS_DEFAULT_VALUE);
return ret;
}
inline unsigned int pnx_serial_pm_update_qos(struct pnx_uart *uart)
{
if (uart->pm_qos_status == PNX_UART_PM_QOS_DOWN) {
pm_qos_update_requirement(PM_QOS_PCLK2_THROUGHPUT,
(char *)uart->uart_name, 52);
/* start guard timer */
mod_timer(&(uart->pm_qos_timer), (jiffies + 1*HZ));
}
if (uart->pm_qos_status != PNX_UART_PM_QOS_UP_FORCE)
uart->pm_qos_status=PNX_UART_PM_QOS_UP_XFER;
return 0;
}
static void pnx_serial_pm_qos_timeout( unsigned long arg)
{
struct pnx_uart *uart = (struct pnx_uart *) arg;
if (uart->pm_qos_status == PNX_UART_PM_QOS_UP_XFER) {
mod_timer(&(uart->pm_qos_timer), (jiffies + 1*HZ));
uart->pm_qos_status = PNX_UART_PM_QOS_UP;
} else if (uart->pm_qos_status != PNX_UART_PM_QOS_UP_FORCE) {
pm_qos_update_requirement(PM_QOS_PCLK2_THROUGHPUT,
(char *)uart->uart_name,
PM_QOS_DEFAULT_VALUE);
uart->pm_qos_status=PNX_UART_PM_QOS_DOWN;
}
}
int update_axi_qos(uint32_t freq)
{
int rc = 0;
if (axi_qos_requested) {
rc = pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
MSM_AXI_QOS_NAME, freq);
if (rc < 0)
CDBG("update AXI bus QOS fails. rc = %d\n",
rc);
else
CDBG("%s: request successful\n", __func__);
}
return rc;
}
static int lcdc_on(struct platform_device *pdev)
{
int ret = 0;
struct msm_fb_data_type *mfd;
unsigned long panel_pixclock_freq, pm_qos_rate;
mfd = platform_get_drvdata(pdev);
panel_pixclock_freq = mfd->fbi->var.pixclock;
#ifdef CONFIG_MSM_NPA_SYSTEM_BUS
pm_qos_rate = MSM_AXI_FLOW_MDP_LCDC_WVGA_2BPP;
#else
#ifdef CONFIG_HUAWEI_KERNEL
if (panel_pixclock_freq > 58000000)
/* pm_qos_rate should be in Khz */
pm_qos_rate = panel_pixclock_freq / 1000 ;
else
pm_qos_rate = 58000;
#else
if (panel_pixclock_freq > 65000000)
pm_qos_rate = panel_pixclock_freq / 1000 ;
else
pm_qos_rate = 65000;
#endif
#endif
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
pm_qos_rate);
mfd = platform_get_drvdata(pdev);
ret = clk_set_rate(pixel_mdp_clk, mfd->fbi->var.pixclock);
if (ret) {
pr_err("%s: Can't set MDP LCDC pixel clock to rate %u\n",
__func__, mfd->fbi->var.pixclock);
goto out;
}
clk_enable(pixel_mdp_clk);
clk_enable(pixel_lcdc_clk);
if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
lcdc_pdata->lcdc_power_save(1);
if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
ret = lcdc_pdata->lcdc_gpio_config(1);
ret = panel_next_on(pdev);
out:
return ret;
}
static int dtv_on(struct platform_device *pdev)
{
int ret = 0;
struct msm_fb_data_type *mfd;
unsigned long panel_pixclock_freq , pm_qos_rate;
mfd = platform_get_drvdata(pdev);
panel_pixclock_freq = mfd->fbi->var.pixclock;
#ifdef CONFIG_MSM_NPA_SYSTEM_BUS
pm_qos_rate = MSM_AXI_FLOW_MDP_DTV_720P_2BPP;
#else
pm_qos_rate = MSM_AXI_QOS_DTV_ON;
#endif
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "dtv",
pm_qos_rate);
mfd = platform_get_drvdata(pdev);
ret = clk_set_rate(tv_src_clk, mfd->fbi->var.pixclock);
if (ret) {
pr_info("%s: clk_set_rate(%d) failed\n", __func__,
mfd->fbi->var.pixclock);
if (mfd->fbi->var.pixclock == 27030000)
mfd->fbi->var.pixclock = 27000000;
ret = clk_set_rate(tv_src_clk, mfd->fbi->var.pixclock);
}
pr_info("%s: tv_src_clk=%dkHz, pm_qos_rate=%ldkHz, [%d]\n", __func__,
mfd->fbi->var.pixclock/1000, pm_qos_rate, ret);
clk_enable(tv_enc_clk);
clk_enable(tv_dac_clk);
clk_enable(hdmi_clk);
if (mdp_tv_clk)
clk_enable(mdp_tv_clk);
if (dtv_pdata && dtv_pdata->lcdc_power_save)
dtv_pdata->lcdc_power_save(1);
if (dtv_pdata && dtv_pdata->lcdc_gpio_config)
ret = dtv_pdata->lcdc_gpio_config(1);
ret = panel_next_on(pdev);
return ret;
}
static int lcdc_off(struct platform_device *pdev)
{
int ret = 0;
ret = panel_next_off(pdev);
clk_disable(mdp_lcdc_pclk_clk);
clk_disable(mdp_lcdc_pad_pclk_clk);
if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
lcdc_pdata->lcdc_power_save(0);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
PM_QOS_DEFAULT_VALUE);
return ret;
}
void mddi_disable(int lock)
{
mddi_host_type host_idx = MDDI_HOST_PRIM;
if (mddi_power_locked)
return;
if (lock)
mddi_power_locked = 1;
if (mddi_host_timer.function)
del_timer_sync(&mddi_host_timer);
mddi_pad_ctrl = mddi_host_reg_in(PAD_CTL);
mddi_host_reg_out(PAD_CTL, 0x0);
if (clk_set_min_rate(mddi_clk, 0) < 0)
printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
clk_disable(mddi_clk);
if (mddi_pclk)
clk_disable(mddi_pclk);
#ifdef CONFIG_SHLCDC_BOARD
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, "mddi",
PM_QOS_DEFAULT_VALUE);
#endif
disable_irq(INT_MDDI_PRI);
if (mddi_pdata && mddi_pdata->mddi_power_save)
mddi_pdata->mddi_power_save(0);
#ifdef CONFIG_SHLCDC_BOARD
if (no_set_power_flag == FALSE) {
shlcdc_api_set_power_mode(SHLCDC_DEV_TYPE_MDDI, SHLCDC_DEV_PWR_OFF);
}
#endif
}
/* file operations */
static int kgsl_first_open_locked(void)
{
int result = 0;
BUG_ON(kgsl_driver.grp_clk == NULL);
BUG_ON(kgsl_driver.imem_clk == NULL);
if (max_axi_freq) {
max_axi_freq_set = 1;
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, DRIVER_NAME,
max_axi_freq);
}
if (kgsl_driver.grp_pclk)
clk_enable(kgsl_driver.grp_pclk);
clk_enable(kgsl_driver.grp_clk);
clk_enable(kgsl_driver.imem_clk);
/* init memory apertures */
result = kgsl_sharedmem_init(&kgsl_driver.shmem);
if (result != 0)
goto done;
/* init devices */
result = kgsl_yamato_init(&kgsl_driver.yamato_device,
&kgsl_driver.yamato_config);
if (result != 0)
goto done;
result = kgsl_yamato_start(&kgsl_driver.yamato_device, 0);
if (result != 0)
goto done;
enable_irq(kgsl_driver.interrupt_num);
done:
return result;
}
static int lcdc_off(struct platform_device *pdev)
{
int ret = 0;
ret = panel_next_off(pdev);
/* LGE_CHANGE, change clock disable sequece, dclk off -> vsync off */
clk_disable(pixel_lcdc_clk);
msleep(16);
clk_disable(pixel_mdp_clk);
if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
lcdc_pdata->lcdc_power_save(0);
if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
ret = lcdc_pdata->lcdc_gpio_config(0);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
PM_QOS_DEFAULT_VALUE);
return ret;
}
static int tovis_qvga_disp_off(struct platform_device *pdev)
{
if (!disp_initialized)
tovis_qvga_disp_init(pdev);
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, "ebi2_lcd",
PM_QOS_DEFAULT_VALUE);
if (display_on) {
// (b) -> (a)
EBI2_WRITE16C(DISP_CMD_PORT, 0x28); // ScreenOff
mdelay(20);
EBI2_WRITE16C(DISP_CMD_PORT, 0x10); // AMP Off
mdelay(120);
// (a) -> (d)
EBI2_WRITE16C(DISP_CMD_PORT, 0xb1);
EBI2_WRITE16D(DISP_DATA_PORT,0x01);
display_on = FALSE;
}
return 0;
}
u32 res_trk_set_perf_level(u32 n_req_perf_lvl, u32 *pn_set_perf_lvl,
struct vcd_clnt_ctxt_type_t *p_cctxt)
{
u32 axi_freq = 0, mfc_freq = 0, calc_mfc_freq = 0;
int rc = -1;
if (!pn_set_perf_lvl) {
VCDRES_MSG_ERROR("%s(): pn_perf_lvl is NULL\n",
__func__);
return FALSE;
}
VCDRES_MSG_LOW("%s(), n_req_perf_lvl = %d", __func__, n_req_perf_lvl);
if (p_cctxt) {
calc_mfc_freq = res_trk_convert_perf_lvl_to_freq(
(u64)n_req_perf_lvl);
if (calc_mfc_freq < VCD_RESTRK_MIN_FREQ_POINT)
calc_mfc_freq = VCD_RESTRK_MIN_FREQ_POINT;
else if (calc_mfc_freq > VCD_RESTRK_MAX_FREQ_POINT)
calc_mfc_freq = VCD_RESTRK_MAX_FREQ_POINT;
if (!p_cctxt->b_decoding) {
if (n_req_perf_lvl >= VGA_PERF_LEVEL) {
mfc_freq = mfc_clk_freq_table[2];
axi_freq = axi_clk_freq_table_enc[1];
} else {
mfc_freq = mfc_clk_freq_table[0];
axi_freq = axi_clk_freq_table_enc[0];
}
VCDRES_MSG_HIGH("\n ENCODER: axi_freq = %u"
", mfc_freq = %u, calc_mfc_freq = %u,"
" n_req_perf_lvl = %u", axi_freq,
mfc_freq, calc_mfc_freq,
n_req_perf_lvl);
} else {
if (n_req_perf_lvl <= QVGA_PERF_LEVEL) {
mfc_freq = mfc_clk_freq_table[0];
axi_freq = axi_clk_freq_table_dec[0];
} else {
axi_freq = axi_clk_freq_table_dec[0];
if (n_req_perf_lvl <= VGA_PERF_LEVEL)
mfc_freq = mfc_clk_freq_table[0];
else if (n_req_perf_lvl <= WVGA_PERF_LEVEL)
mfc_freq = mfc_clk_freq_table[1];
else {
mfc_freq = mfc_clk_freq_table[2];
axi_freq = axi_clk_freq_table_dec[1];
}
}
VCDRES_MSG_HIGH("\n DECODER: axi_freq = %u"
", mfc_freq = %u, calc_mfc_freq = %u,"
" n_req_perf_lvl = %u", axi_freq,
mfc_freq, calc_mfc_freq,
n_req_perf_lvl);
}
} else {
VCDRES_MSG_HIGH("%s() WARNING:: p_cctxt is NULL", __func__);
return TRUE;
}
#ifdef AXI_CLK_SCALING
if (n_req_perf_lvl != VCD_RESTRK_MIN_PERF_LEVEL) {
VCDRES_MSG_HIGH("\n %s(): Setting AXI freq to %u",
__func__, axi_freq);
rc = pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ,
MSM_AXI_QOS_NAME, axi_freq);
if (rc < 0) {
VCDRES_MSG_ERROR("\n Update AXI bus QOS fails,"
"rc = %d\n", rc);
return FALSE;
}
}
#endif
#ifdef USE_RES_TRACKER
if (n_req_perf_lvl != VCD_RESTRK_MIN_PERF_LEVEL) {
VCDRES_MSG_HIGH("\n %s(): Setting MFC freq to %u",
__func__, mfc_freq);
if (!vid_c_sel_clk_rate(mfc_freq)) {
VCDRES_MSG_ERROR("%s(): vid_c_sel_clk_rate FAILED\n",
__func__);
*pn_set_perf_lvl = 0;
return FALSE;
}
}
#endif
*pn_set_perf_lvl =
res_trk_convert_freq_to_perf_lvl((u64) mfc_freq);
return TRUE;
}
/*Suspend function*/
static int kgsl_suspend(struct platform_device *dev, pm_message_t state)
{
pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ, DRIVER_NAME,
PM_QOS_DEFAULT_VALUE);
return 0;
}
static int
msm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
DECLARE_COMPLETION_ONSTACK(complete);
struct msm_i2c_dev *dev = i2c_get_adapdata(adap);
int ret;
int rem = num;
uint16_t addr;
long timeout;
unsigned long flags;
int check_busy = 1;
mutex_lock(&dev->mlock);
if (dev->suspended) {
mutex_unlock(&dev->mlock);
return -EIO;
}
/* Don't allow power collapse until we release remote spinlock */
pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, "msm_i2c",
dev->pdata->pm_lat);
msm_i2c_rmutex_lock(dev);
if (adap == &dev->adap_pri)
writel(0, dev->base + I2C_INTERFACE_SELECT);
else
writel(I2C_INTERFACE_SELECT_INTF_SELECT,
dev->base + I2C_INTERFACE_SELECT);
enable_irq(dev->irq);
while (rem) {
addr = msgs->addr << 1;
if (msgs->flags & I2C_M_RD)
addr |= 1;
spin_lock_irqsave(&dev->lock, flags);
dev->msg = msgs;
dev->rem = rem;
dev->pos = 0;
dev->err = 0;
dev->flush_cnt = 0;
dev->cnt = msgs->len;
dev->complete = &complete;
spin_unlock_irqrestore(&dev->lock, flags);
if (check_busy) {
ret = msm_i2c_poll_notbusy(dev);
if (ret)
ret = msm_i2c_recover_bus_busy(dev, adap);
if (ret) {
dev_err(dev->dev,
"Error waiting for notbusy\n");
goto out_err;
}
check_busy = 0;
}
if (rem == 1 && msgs->len == 0)
addr |= I2C_WRITE_DATA_LAST_BYTE;
/* Wait for WR buffer not full */
ret = msm_i2c_poll_writeready(dev);
if (ret) {
ret = msm_i2c_recover_bus_busy(dev, adap);
if (ret) {
dev_err(dev->dev,
"Error waiting for write ready before addr\n");
goto out_err;
}
}
/* special case for doing 1 byte read.
* There should be no scheduling between I2C controller becoming
* ready to read and writing LAST-BYTE to I2C controller
* This will avoid potential of I2C controller starting to latch
* another extra byte.
*/
if ((msgs->len == 1) && (msgs->flags & I2C_M_RD)) {
uint32_t retries = 0;
spin_lock_irqsave(&dev->lock, flags);
writel(I2C_WRITE_DATA_ADDR_BYTE | addr,
dev->base + I2C_WRITE_DATA);
/* Poll for I2C controller going into RX_DATA mode to
* ensure controller goes into receive mode.
* Just checking write_buffer_full may not work since
* there is delay between the write-buffer becoming
* empty and the slave sending ACK to ensure I2C
* controller goes in receive mode to receive data.
*/
while (retries != 2000) {
uint32_t status = readl(dev->base + I2C_STATUS);
if ((status & I2C_STATUS_RX_DATA_STATE)
== I2C_STATUS_RX_DATA_STATE)
break;
retries++;
}
if (retries >= 2000) {
dev->rd_acked = 0;
spin_unlock_irqrestore(&dev->lock, flags);
/* 1-byte-reads from slow devices in interrupt
* context
*/
goto wait_for_int;
}
dev->rd_acked = 1;
writel(I2C_WRITE_DATA_LAST_BYTE,
dev->base + I2C_WRITE_DATA);
spin_unlock_irqrestore(&dev->lock, flags);
} else {
writel(I2C_WRITE_DATA_ADDR_BYTE | addr,
dev->base + I2C_WRITE_DATA);
}
/* Polling and waiting for write_buffer_empty is not necessary.
* Even worse, if we do, it can result in invalid status and
* error if interrupt(s) occur while polling.
*/
/*
* Now that we've setup the xfer, the ISR will transfer the data
* and wake us up with dev->err set if there was an error
*/
wait_for_int:
timeout = wait_for_completion_timeout(&complete, HZ);
if (!timeout) {
dev_err(dev->dev, "Transaction timed out\n");
writel(I2C_WRITE_DATA_LAST_BYTE,
dev->base + I2C_WRITE_DATA);
msleep(100);
/* FLUSH */
readl(dev->base + I2C_READ_DATA);
readl(dev->base + I2C_STATUS);
ret = -ETIMEDOUT;
goto out_err;
}
if (dev->err) {
dev_err(dev->dev,
"Error during data xfer (%d)\n",
dev->err);
ret = dev->err;
goto out_err;
}
if (msgs->flags & I2C_M_RD)
check_busy = 1;
msgs++;
rem--;
}
ret = num;
out_err:
spin_lock_irqsave(&dev->lock, flags);
dev->complete = NULL;
dev->msg = NULL;
dev->rem = 0;
dev->pos = 0;
dev->err = 0;
dev->flush_cnt = 0;
dev->cnt = 0;
spin_unlock_irqrestore(&dev->lock, flags);
disable_irq(dev->irq);
msm_i2c_rmutex_unlock(dev);
pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, "msm_i2c",
PM_QOS_DEFAULT_VALUE);
mutex_unlock(&dev->mlock);
return ret;
}