/*
* setup Gbit PHYs
*/
int last_stage_init(void)
{
unsigned int k;
print_fpga_info();
miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
bb_miiphy_read, bb_miiphy_write);
for (k = 0; k < 32; ++k)
configure_gbit_phy(k);
/* take fpga serdes blocks out of reset */
FPGA_SET_REG(0, quad_serdes_reset, 0);
return 0;
}
/*
* setup Gbit PHYs
*/
int last_stage_init(void)
{
struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0);
unsigned int k;
print_fpga_info();
miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
bb_miiphy_read, bb_miiphy_write);
for (k = 0; k < 32; ++k)
configure_gbit_phy(k);
/* take fpga serdes blocks out of reset */
out_le16(&fpga->quad_serdes_reset, 0);
return 0;
}
int last_stage_init(void)
{
print_fpga_info();
return 0;
}
int last_stage_init(void)
{
unsigned int k;
unsigned int fpga;
int failed = 0;
char str_phys[] = "Setup PHYs -";
char str_serdes[] = "Start SERDES blocks";
char str_channels[] = "Start FPGA channels";
char str_locks[] = "Verify SERDES locks";
char str_hicb[] = "Verify HICB status";
char str_status[] = "Verify PHY status -";
char slash[] = "\\|/-\\|/-";
print_fpga_info(0);
print_fpga_info(1);
/* setup Gbit PHYs */
puts("TRANS: ");
puts(str_phys);
miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
bb_miiphy_read, bb_miiphy_write);
for (k = 0; k < 32; ++k) {
configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k);
putc('\b');
putc(slash[k % 8]);
}
miiphy_register(CONFIG_SYS_GBIT_MII1_BUSNAME,
bb_miiphy_read, bb_miiphy_write);
for (k = 0; k < 32; ++k) {
configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k);
putc('\b');
putc(slash[k % 8]);
}
blank_string(strlen(str_phys));
/* take fpga serdes blocks out of reset */
puts(str_serdes);
udelay(500000);
FPGA_SET_REG(0, quad_serdes_reset, 0);
FPGA_SET_REG(1, quad_serdes_reset, 0);
blank_string(strlen(str_serdes));
/* take channels out of reset */
puts(str_channels);
udelay(500000);
for (fpga = 0; fpga < 2; ++fpga) {
for (k = 0; k < 32; ++k)
FPGA_SET_REG(fpga, ch[k].config_int, 0);
}
blank_string(strlen(str_channels));
/* verify channels serdes lock */
puts(str_locks);
udelay(500000);
for (fpga = 0; fpga < 2; ++fpga) {
for (k = 0; k < 32; ++k) {
u16 status;
FPGA_GET_REG(k, ch[k].status_int, &status);
if (!(status & (1 << 4))) {
failed = 1;
printf("fpga %d channel %d: no serdes lock\n",
fpga, k);
}
/* reset events */
FPGA_SET_REG(fpga, ch[k].status_int, 0);
}
}
blank_string(strlen(str_locks));
/* verify hicb_status */
puts(str_hicb);
for (fpga = 0; fpga < 2; ++fpga) {
for (k = 0; k < 32; ++k) {
u16 status;
FPGA_GET_REG(k, hicb_ch[k].status_int, &status);
if (status)
printf("fpga %d hicb %d: hicb status %04x\n",
fpga, k, status);
/* reset events */
FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0);
}
}
blank_string(strlen(str_hicb));
/* verify phy status */
puts(str_status);
for (k = 0; k < 32; ++k) {
if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) {
printf("verify baseboard phy %d failed\n", k);
failed = 1;
}
putc('\b');
putc(slash[k % 8]);
}
for (k = 0; k < 32; ++k) {
if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) {
printf("verify extensionboard phy %d failed\n", k);
failed = 1;
}
putc('\b');
putc(slash[k % 8]);
}
blank_string(strlen(str_status));
printf("Starting 64 channels %s\n", failed ? "failed" : "ok");
return 0;
}
int last_stage_init(void)
{
print_fpga_info();
return osd_probe(0);
}
