/**
* @brief: c UART0 IRQ Handler
*/
void uart_iprocess(void)
{
uint8_t IIR_IntId; // Interrupt ID from IIR
LPC_UART_TypeDef *pUart = (LPC_UART_TypeDef *)LPC_UART0;
__disable_irq();
#ifdef DEBUG_0
//uart1_put_string("Entering c_UART0_IRQHandler\n\r");
#endif // DEBUG_0
/* Reading IIR automatically acknowledges the interrupt */
IIR_IntId = (pUart->IIR) >> 1 ; // skip pending bit in IIR
if (IIR_IntId & IIR_RDA) { // Receive Data Avaialbe
/* read UART. Read RBR will clear the interrupt */
// Perform a 'context switch'
PCB *old_proc = gp_current_process;
gp_current_process = k_get_process(PID_UART_IPROC);
g_char_in = pUart->RBR;
#ifdef DEBUG_0
uart1_put_string("Reading a char = ");
uart1_put_char(g_char_in);
uart1_put_string("\n\r");
#endif // DEBUG_0
// process the character. If it is a hotkey, call the corresponding function
// If we are reading, fall through to default and add to the command buffer
switch (g_char_in) {
case '\r':
case '\n':
if (g_is_reading) {
// We've finished reading a command, send it to the KCD process
MSG_BUF *message;
g_is_reading = 0;
strcpy("\n\r", (char *)(g_in_buffer + g_in_index));
if (is_memory_available()) {
message = k_request_memory_block();
message->mtype = DEFAULT;
strcpy((char *)g_in_buffer, message->mtext);
k_send_message(PID_KCD, message);
}
g_in_index = 0;
}
break;
case '%':
if (!g_is_reading) {
// Start reading a command
g_is_reading = 1;
g_in_index = 1;
g_in_buffer[0] = '%';
break;
}
#if defined(DEBUG_0) && defined(_DEBUG_HOTKEYS)
case READY_Q_COMMAND:
if (!g_is_reading) {
print_ready();
break;
}
case MEMORY_Q_COMMAND:
if (!g_is_reading) {
print_mem_blocked();
break;
}
case RECEIVE_Q_COMMAND:
if (!g_is_reading) {
print_receive_blocked();
break;
}
case MESSAGE_COMMAND:
if (!g_is_reading) {
print_messages();
break;
}
#endif /* DEBUG HOTKEYS */
default:
if (g_is_reading) {
// TODO: check bounds
g_in_buffer[g_in_index++] = g_char_in;
}
}
gp_current_process = old_proc;
} else if (IIR_IntId & IIR_THRE) {
/* THRE Interrupt, transmit holding register becomes empty */
// Check for messages and load the buffer
// Perform a 'context switch' to the i-process
MSG_BUF *message;
PCB *old_proc = gp_current_process;
gp_current_process = k_get_process(PID_UART_IPROC);
// Don't block waiting for a message
while (is_message(PID_UART_IPROC)) {
int sender = PID_CRT;
char *c;
// Receive message and copy it to the buffer
message = k_receive_message(&sender);
c = message->mtext;
//dprintf("Copying message to buffer: %s\n\r", message->mtext);
if (*c != '\0') {
do {
g_out_buffer[g_out_end] = *c;
g_out_end = (g_out_end + 1) % OUTPUT_BUFF_SIZE;
c++;
} while (g_out_end != g_out_start && *c != '\0');
}
k_release_memory_block(message);
}
// Check if there is something in the circular buffer
if (g_out_start != g_out_end) {
g_char_out = g_out_buffer[g_out_start];
pUart->THR = g_char_out;
g_out_start = (g_out_start + 1) % OUTPUT_BUFF_SIZE;
} else {
// nothing to print, disable the THRE interrupt
pUart->IER ^= IER_THRE; // toggle (disable) the IER_THRE bit
}
gp_current_process = old_proc;
} else { /* not implemented yet */
#ifdef DEBUG_0
//uart1_put_string("Should not get here!\n\r");
#endif // DEBUG_0
__enable_irq();
return;
}
__enable_irq();
}
/*
* This function is called by the assembly STUB function
*/
void uart_handler() {
// Disable all interupts
atomic_up();
#ifdef _IO_DEBUG
rtx_dbug_outs((CHAR *) "Enter: uart_handler\r\n");
rtx_dbug_outs((CHAR *) "Reading data...\r\n");
#endif
// irene said this should be enough - would be
// very rare if it wasn't ready to read
while (!(SERIAL1_UCSR & 1)) { }
char_in = SERIAL1_RD;
#ifdef _IO_DEBUG
rtx_dbug_outs((CHAR *) "Determining what to do with char...\r\n");
#endif
struct io_message * msg;
switch(char_in) {
#ifdef _HOTKEYS_DEBUG
case '!':
rtx_dbug_outs((CHAR *) "'!' hotkey detected...\r\n");
print_queues(); // print processes on ready queue and priorities
break;
case '@':
rtx_dbug_outs((CHAR *) "'@' hotkey detected...\r\n");
print_mem_blocked(); // print processes on memory blocked queue and priorities
break;
case '#':
rtx_dbug_outs((CHAR *) "'#' hotkey detected...\r\n");
print_msg_blocked(); // print processes on message blocked queue and priorities
break;
case '$':
rtx_dbug_outs((CHAR *) "'$' hotkey detected...\r\n");
print_availible_mem_queue(); // print available memory queue
break;
case '^':
rtx_dbug_outs((CHAR *) "'^' hotkey detected...\r\n");
print_used_mem_queue(); // print used memory queue
break;
case '&':
rtx_dbug_outs((CHAR *) "'&' hotkey detected...\r\n");
output_kcd_buffer(); // print kcd buffer
break;
case '*':
rtx_dbug_outs((CHAR *) "'*' hotkey detected...\r\n");
print_cmds(); // print valid commands
break;
#endif
default:
#ifdef _IO_DEBUG
rtx_dbug_outs((CHAR *) "Sending message to KCD proc...\r\n");
#endif
if (!are_blocks_available()) {
atomic_down();
return;
}
msg = (io_message *)request_memory_block();
// reset tx/rx and send it to kcd
msg->tx = UART_PID;
msg->rx = KCD_PID;
msg->msg[0] = char_in;
send_message(KCD_PID, msg);
break;
}
// Enable all interupts
atomic_down();
}
