/**
* DPDK callback to start the device.
*
* Simulate device start by attaching all configured flows.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_start(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
int err;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
if (priv->started) {
priv_unlock(priv);
return 0;
}
DEBUG("%p: allocating and configuring hash RX queues", (void *)dev);
err = priv_create_hash_rxqs(priv);
if (!err)
err = priv_rehash_flows(priv);
if (!err)
priv->started = 1;
else {
ERROR("%p: an error occurred while configuring hash RX queues:"
" %s",
(void *)priv, strerror(err));
/* Rollback. */
priv_special_flow_disable_all(priv);
priv_mac_addrs_disable(priv);
priv_destroy_hash_rxqs(priv);
}
if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_NONE)
priv_fdir_enable(priv);
priv_dev_interrupt_handler_install(priv, dev);
priv_unlock(priv);
return -err;
}
/**
* DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
* @param wait_to_complete
* Wait for request completion (ignored).
*/
int
mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
struct priv *priv = mlx5_get_priv(dev);
int ret;
priv_lock(priv);
ret = mlx5_link_update_unlocked(dev, wait_to_complete);
priv_unlock(priv);
return ret;
}
/**
* DPDK callback to get information about the device.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] info
* Info structure output buffer.
*/
void
mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
struct priv *priv = mlx5_get_priv(dev);
unsigned int max;
char ifname[IF_NAMESIZE];
priv_lock(priv);
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
/*
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
*/
max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
priv->device_attr.max_qp : priv->device_attr.max_cq);
/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
if (max >= 65535)
max = 65535;
info->max_rx_queues = max;
info->max_tx_queues = max;
info->max_mac_addrs = RTE_DIM(priv->mac);
info->rx_offload_capa =
(priv->hw_csum ?
(DEV_RX_OFFLOAD_IPV4_CKSUM |
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM) :
0);
info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
if (priv->hw_csum)
info->tx_offload_capa |=
(DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM);
if (priv_get_ifname(priv, &ifname) == 0)
info->if_index = if_nametoindex(ifname);
/* FIXME: RETA update/query API expects the callee to know the size of
* the indirection table, for this PMD the size varies depending on
* the number of RX queues, it becomes impossible to find the correct
* size if it is not fixed.
* The API should be updated to solve this problem. */
info->reta_size = priv->ind_table_max_size;
info->speed_capa =
ETH_LINK_SPEED_1G |
ETH_LINK_SPEED_10G |
ETH_LINK_SPEED_20G |
ETH_LINK_SPEED_25G |
ETH_LINK_SPEED_40G |
ETH_LINK_SPEED_50G |
ETH_LINK_SPEED_56G |
ETH_LINK_SPEED_100G;
priv_unlock(priv);
}
/**
* DPDK callback to bring the link UP.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, errno value on failure.
*/
int
mlx5_set_link_up(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
int err;
priv_lock(priv);
err = priv_set_link(priv, 1);
priv_unlock(priv);
return err;
}
/**
* DPDK callback to configure a VLAN filter.
*
* @param dev
* Pointer to Ethernet device structure.
* @param vlan_id
* VLAN ID to filter.
* @param on
* Toggle filter.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct priv *priv = dev->data->dev_private;
int ret;
priv_lock(priv);
ret = vlan_filter_set(dev, vlan_id, on);
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* Handle interrupts from the NIC.
*
* @param[in] intr_handle
* Interrupt handler.
* @param cb_arg
* Callback argument.
*/
void
mlx5_dev_interrupt_handler(struct rte_intr_handle *intr_handle, void *cb_arg)
{
struct rte_eth_dev *dev = cb_arg;
struct priv *priv = dev->data->dev_private;
int ret;
(void)intr_handle;
priv_lock(priv);
ret = priv_dev_link_status_handler(priv, dev);
priv_unlock(priv);
if (ret)
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
}
/**
* Handle delayed link status event.
*
* @param arg
* Registered argument.
*/
void
mlx5_dev_link_status_handler(void *arg)
{
struct rte_eth_dev *dev = arg;
struct priv *priv = dev->data->dev_private;
int ret;
priv_lock(priv);
assert(priv->pending_alarm == 1);
ret = priv_dev_link_status_handler(priv, dev);
priv_unlock(priv);
if (ret)
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
}
/**
* DPDK callback for Ethernet device configuration.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_configure(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
int ret;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
ret = dev_configure(dev);
assert(ret >= 0);
priv_unlock(priv);
return -ret;
}
/**
* DPDK callback to modify flow control parameters.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[in] fc_conf
* Flow control parameters.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct priv *priv = dev->data->dev_private;
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_SPAUSEPARAM
};
int ret;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
ifr.ifr_data = ðpause;
ethpause.autoneg = fc_conf->autoneg;
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_RX_PAUSE))
ethpause.rx_pause = 1;
else
ethpause.rx_pause = 0;
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_TX_PAUSE))
ethpause.tx_pause = 1;
else
ethpause.tx_pause = 0;
priv_lock(priv);
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
ret = errno;
WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
" failed: %s",
strerror(ret));
goto out;
}
ret = 0;
out:
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* DPDK callback to close the device.
*
* Destroy all queues and objects, free memory.
*
* @param dev
* Pointer to Ethernet device structure.
*/
static void
mlx5_dev_close(struct rte_eth_dev *dev)
{
struct priv *priv = mlx5_get_priv(dev);
unsigned int i;
priv_lock(priv);
DEBUG("%p: closing device \"%s\"",
(void *)dev,
((priv->ctx != NULL) ? priv->ctx->device->name : ""));
/* In case mlx5_dev_stop() has not been called. */
priv_dev_interrupt_handler_uninstall(priv, dev);
priv_special_flow_disable_all(priv);
priv_mac_addrs_disable(priv);
priv_destroy_hash_rxqs(priv);
/* Remove flow director elements. */
priv_fdir_disable(priv);
priv_fdir_delete_filters_list(priv);
/* Prevent crashes when queues are still in use. */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
if (priv->rxqs != NULL) {
/* XXX race condition if mlx5_rx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i) {
struct rxq *rxq = (*priv->rxqs)[i];
struct rxq_ctrl *rxq_ctrl;
if (rxq == NULL)
continue;
rxq_ctrl = container_of(rxq, struct rxq_ctrl, rxq);
(*priv->rxqs)[i] = NULL;
rxq_cleanup(rxq_ctrl);
rte_free(rxq_ctrl);
}
priv->rxqs_n = 0;
priv->rxqs = NULL;
}
/**
* DPDK callback to stop the device.
*
* Simulate device stop by detaching all configured flows.
*
* @param dev
* Pointer to Ethernet device structure.
*/
void
mlx5_dev_stop(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
if (mlx5_is_secondary())
return;
priv_lock(priv);
if (!priv->started) {
priv_unlock(priv);
return;
}
DEBUG("%p: cleaning up and destroying hash RX queues", (void *)dev);
priv_special_flow_disable_all(priv);
priv_mac_addrs_disable(priv);
priv_destroy_hash_rxqs(priv);
priv_fdir_disable(priv);
priv_dev_interrupt_handler_uninstall(priv, dev);
priv->started = 0;
priv_unlock(priv);
}
/**
* DPDK callback to close the device.
*
* Destroy all queues and objects, free memory.
*
* @param dev
* Pointer to Ethernet device structure.
*/
static void
mlx5_dev_close(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
void *tmp;
unsigned int i;
priv_lock(priv);
DEBUG("%p: closing device \"%s\"",
(void *)dev,
((priv->ctx != NULL) ? priv->ctx->device->name : ""));
/* In case mlx5_dev_stop() has not been called. */
priv_dev_interrupt_handler_uninstall(priv, dev);
priv_allmulticast_disable(priv);
priv_promiscuous_disable(priv);
priv_mac_addrs_disable(priv);
priv_destroy_hash_rxqs(priv);
/* Prevent crashes when queues are still in use. */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
if (priv->rxqs != NULL) {
/* XXX race condition if mlx5_rx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i) {
tmp = (*priv->rxqs)[i];
if (tmp == NULL)
continue;
(*priv->rxqs)[i] = NULL;
rxq_cleanup(tmp);
rte_free(tmp);
}
priv->rxqs_n = 0;
priv->rxqs = NULL;
}
if (priv->txqs != NULL) {
/* XXX race condition if mlx5_tx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->txqs_n); ++i) {
tmp = (*priv->txqs)[i];
if (tmp == NULL)
continue;
(*priv->txqs)[i] = NULL;
txq_cleanup(tmp);
rte_free(tmp);
}
priv->txqs_n = 0;
priv->txqs = NULL;
}
if (priv->pd != NULL) {
assert(priv->ctx != NULL);
claim_zero(ibv_dealloc_pd(priv->pd));
claim_zero(ibv_close_device(priv->ctx));
} else
assert(priv->ctx == NULL);
if (priv->rss_conf != NULL) {
for (i = 0; (i != hash_rxq_init_n); ++i)
rte_free((*priv->rss_conf)[i]);
rte_free(priv->rss_conf);
}
priv_unlock(priv);
memset(priv, 0, sizeof(*priv));
}
/**
* DPDK callback to change the MTU.
*
* Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
* received). Use this as a hint to enable/disable scattered packets support
* and improve performance when not needed.
* Since failure is not an option, reconfiguring queues on the fly is not
* recommended.
*
* @param dev
* Pointer to Ethernet device structure.
* @param in_mtu
* New MTU.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
struct priv *priv = dev->data->dev_private;
int ret = 0;
unsigned int i;
uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
mlx5_rx_burst;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
/* Set kernel interface MTU first. */
if (priv_set_mtu(priv, mtu)) {
ret = errno;
WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
strerror(ret));
goto out;
} else
DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
priv->mtu = mtu;
/* Temporarily replace RX handler with a fake one, assuming it has not
* been copied elsewhere. */
dev->rx_pkt_burst = removed_rx_burst;
/* Make sure everyone has left mlx5_rx_burst() and uses
* removed_rx_burst() instead. */
rte_wmb();
usleep(1000);
/* Reconfigure each RX queue. */
for (i = 0; (i != priv->rxqs_n); ++i) {
struct rxq *rxq = (*priv->rxqs)[i];
unsigned int max_frame_len;
int sp;
if (rxq == NULL)
continue;
/* Calculate new maximum frame length according to MTU and
* toggle scattered support (sp) if necessary. */
max_frame_len = (priv->mtu + ETHER_HDR_LEN +
(ETHER_MAX_VLAN_FRAME_LEN - ETHER_MAX_LEN));
sp = (max_frame_len > (rxq->mb_len - RTE_PKTMBUF_HEADROOM));
/* Provide new values to rxq_setup(). */
dev->data->dev_conf.rxmode.jumbo_frame = sp;
dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
ret = rxq_rehash(dev, rxq);
if (ret) {
/* Force SP RX if that queue requires it and abort. */
if (rxq->sp)
rx_func = mlx5_rx_burst_sp;
break;
}
/* Scattered burst function takes priority. */
if (rxq->sp)
rx_func = mlx5_rx_burst_sp;
}
/* Burst functions can now be called again. */
rte_wmb();
dev->rx_pkt_burst = rx_func;
out:
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* Configure secondary process queues from a private data pointer (primary
* or secondary) and update burst callbacks. Can take place only once.
*
* All queues must have been previously created by the primary process to
* avoid undefined behavior.
*
* @param priv
* Private data pointer from either primary or secondary process.
*
* @return
* Private data pointer from secondary process, NULL in case of error.
*/
struct priv *
mlx5_secondary_data_setup(struct priv *priv)
{
unsigned int port_id = 0;
struct mlx5_secondary_data *sd;
void **tx_queues;
void **rx_queues;
unsigned int nb_tx_queues;
unsigned int nb_rx_queues;
unsigned int i;
/* priv must be valid at this point. */
assert(priv != NULL);
/* priv->dev must also be valid but may point to local memory from
* another process, possibly with the same address and must not
* be dereferenced yet. */
assert(priv->dev != NULL);
/* Determine port ID by finding out where priv comes from. */
while (1) {
sd = &mlx5_secondary_data[port_id];
rte_spinlock_lock(&sd->lock);
/* Primary process? */
if (sd->primary_priv == priv)
break;
/* Secondary process? */
if (sd->data.dev_private == priv)
break;
rte_spinlock_unlock(&sd->lock);
if (++port_id == RTE_DIM(mlx5_secondary_data))
port_id = 0;
}
/* Switch to secondary private structure. If private data has already
* been updated by another thread, there is nothing else to do. */
priv = sd->data.dev_private;
if (priv->dev->data == &sd->data)
goto end;
/* Sanity checks. Secondary private structure is supposed to point
* to local eth_dev, itself still pointing to the shared device data
* structure allocated by the primary process. */
assert(sd->shared_dev_data != &sd->data);
assert(sd->data.nb_tx_queues == 0);
assert(sd->data.tx_queues == NULL);
assert(sd->data.nb_rx_queues == 0);
assert(sd->data.rx_queues == NULL);
assert(priv != sd->primary_priv);
assert(priv->dev->data == sd->shared_dev_data);
assert(priv->txqs_n == 0);
assert(priv->txqs == NULL);
assert(priv->rxqs_n == 0);
assert(priv->rxqs == NULL);
nb_tx_queues = sd->shared_dev_data->nb_tx_queues;
nb_rx_queues = sd->shared_dev_data->nb_rx_queues;
/* Allocate local storage for queues. */
tx_queues = rte_zmalloc("secondary ethdev->tx_queues",
sizeof(sd->data.tx_queues[0]) * nb_tx_queues,
RTE_CACHE_LINE_SIZE);
rx_queues = rte_zmalloc("secondary ethdev->rx_queues",
sizeof(sd->data.rx_queues[0]) * nb_rx_queues,
RTE_CACHE_LINE_SIZE);
if (tx_queues == NULL || rx_queues == NULL)
goto error;
/* Lock to prevent control operations during setup. */
priv_lock(priv);
/* TX queues. */
for (i = 0; i != nb_tx_queues; ++i) {
struct txq *primary_txq = (*sd->primary_priv->txqs)[i];
struct txq *txq;
if (primary_txq == NULL)
continue;
txq = rte_calloc_socket("TXQ", 1, sizeof(*txq), 0,
primary_txq->socket);
if (txq != NULL) {
if (txq_setup(priv->dev,
txq,
primary_txq->elts_n * MLX5_PMD_SGE_WR_N,
primary_txq->socket,
NULL) == 0) {
txq->stats.idx = primary_txq->stats.idx;
tx_queues[i] = txq;
continue;
}
rte_free(txq);
}
while (i) {
txq = tx_queues[--i];
txq_cleanup(txq);
rte_free(txq);
}
goto error;
}
/* RX queues. */
for (i = 0; i != nb_rx_queues; ++i) {
struct rxq *primary_rxq = (*sd->primary_priv->rxqs)[i];
if (primary_rxq == NULL)
continue;
/* Not supported yet. */
rx_queues[i] = NULL;
}
/* Update everything. */
priv->txqs = (void *)tx_queues;
priv->txqs_n = nb_tx_queues;
priv->rxqs = (void *)rx_queues;
priv->rxqs_n = nb_rx_queues;
sd->data.rx_queues = rx_queues;
sd->data.tx_queues = tx_queues;
sd->data.nb_rx_queues = nb_rx_queues;
sd->data.nb_tx_queues = nb_tx_queues;
sd->data.dev_link = sd->shared_dev_data->dev_link;
sd->data.mtu = sd->shared_dev_data->mtu;
memcpy(sd->data.rx_queue_state, sd->shared_dev_data->rx_queue_state,
sizeof(sd->data.rx_queue_state));
memcpy(sd->data.tx_queue_state, sd->shared_dev_data->tx_queue_state,
sizeof(sd->data.tx_queue_state));
sd->data.dev_flags = sd->shared_dev_data->dev_flags;
/* Use local data from now on. */
rte_mb();
priv->dev->data = &sd->data;
rte_mb();
priv->dev->tx_pkt_burst = mlx5_tx_burst;
priv->dev->rx_pkt_burst = removed_rx_burst;
priv_unlock(priv);
end:
/* More sanity checks. */
assert(priv->dev->tx_pkt_burst == mlx5_tx_burst);
assert(priv->dev->rx_pkt_burst == removed_rx_burst);
assert(priv->dev->data == &sd->data);
rte_spinlock_unlock(&sd->lock);
return priv;
error:
priv_unlock(priv);
rte_free(tx_queues);
rte_free(rx_queues);
rte_spinlock_unlock(&sd->lock);
return NULL;
}
