eMBException
eMBFuncWriteHoldingRegister( uint8_t * pucFrame, uint16_t * usLen )
{
uint16_t usRegAddress;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
usRegAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
usRegAddress++;
/* Make callback to update the value. */
eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF],
usRegAddress, 1, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBFuncReadHoldingRegister( uint8_t * pucFrame, uint16_t * usLen )
{
uint16_t usRegAddress;
uint16_t usRegCount;
uint8_t *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
usRegCount = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usRegCount >= 1 ) && ( usRegCount <= MB_PDU_FUNC_READ_REGCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_HOLDING_REGISTER;
*usLen += 1;
/* Second byte in the response contain the number of bytes. */
*pucFrameCur++ = ( uint8_t ) ( usRegCount * 2 );
*usLen += 1;
/* Make callback to fill the buffer. */
eRegStatus = eMBRegHoldingCB( pucFrameCur, usRegAddress, usRegCount, MB_REG_READ );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
*usLen += usRegCount * 2;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBMasterFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usCoilCnt;
UCHAR ucByteCount;
UCHAR ucByteCountVerify;
UCHAR *ucMBFrame;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, the *usLen is not need check. */
if( ( *usLen == MB_PDU_FUNC_WRITE_MUL_SIZE ) || xMBMasterRequestIsBroadcast() )
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
usRegAddress++;
usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
ucByteCount = ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF];
/* Compute the number of expected bytes in the request. */
if( ( usCoilCnt & 0x0007 ) != 0 )
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
}
else
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
}
if( ( usCoilCnt >= 1 ) && ( ucByteCountVerify == ucByteCount ) )
{
eRegStatus =
eMBMasterRegCoilsCB( &ucMBFrame[MB_PDU_REQ_WRITE_MUL_VALUES_OFF],
usRegAddress, usCoilCnt, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usRegCount;
UCHAR ucRegByteCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen >= ( MB_PDU_FUNC_WRITE_MUL_SIZE_MIN + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] );
usRegAddress <<= 8;
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF] );
usRegCount <<= 8;
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF + 1] );
ucRegByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
if( ( usRegCount >= 1 ) &&
( usRegCount <= MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ) &&
( ucRegByteCount == ( UCHAR ) ( 2 * usRegCount ) ) )
{
/* Make callback to update the register values. */
eRegStatus =
eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
usRegAddress, usRegCount, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting
* address and the quantity of registers. We reuse the
* old values in the buffer because they are still valid.
*/
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBMasterFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegReadAddress;
USHORT usRegReadCount;
USHORT usRegWriteAddress;
USHORT usRegWriteCount;
UCHAR *ucMBFrame;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, and it's read mode. This request don't need execute. */
if ( xMBMasterRequestIsBroadcast() )
{
eStatus = MB_EX_NONE;
}
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READWRITE_SIZE_MIN )
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegReadAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF] << 8U );
usRegReadAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF + 1] );
usRegReadAddress++;
usRegReadCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF] << 8U );
usRegReadCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF + 1] );
usRegWriteAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF] << 8U );
usRegWriteAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF + 1] );
usRegWriteAddress++;
usRegWriteCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF] << 8U );
usRegWriteCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF + 1] );
if( ( 2 * usRegReadCount ) == pucFrame[MB_PDU_FUNC_READWRITE_READ_BYTECNT_OFF] )
{
/* Make callback to update the register values. */
eRegStatus = eMBMasterRegHoldingCB( &ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF],
usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
if( eRegStatus == MB_ENOERR )
{
/* Make the read callback. */
eRegStatus = eMBMasterRegHoldingCB(&pucFrame[MB_PDU_FUNC_READWRITE_READ_VALUES_OFF],
usRegReadAddress, usRegReadCount, MB_REG_READ);
}
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
return eStatus;
}
eMBException eMBMasterFuncWriteMultipleHoldingRegister(uint8_t *pucFrame,
uint16_t *usLen)
{
uint8_t *ucMBFrame;
uint16_t usRegAddress;
uint16_t usRegCount;
uint8_t ucRegByteCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, the *usLen is not need check. */
if ((*usLen == MB_PDU_SIZE_MIN + MB_PDU_FUNC_WRITE_MUL_SIZE) ||
xMBMasterRequestIsBroadcast())
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegAddress = (uint16_t) (ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] << 8);
usRegAddress |= (uint16_t) (ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1]);
usRegAddress++;
usRegCount = (uint16_t) (ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF] << 8);
usRegCount |= (uint16_t) (ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF + 1]);
ucRegByteCount = ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF];
if (ucRegByteCount == 2 * usRegCount)
{
/* Make callback to update the register values. */
eRegStatus =
eMBMasterRegHoldingCB(&ucMBFrame[MB_PDU_REQ_WRITE_MUL_VALUES_OFF],
usRegAddress, usRegCount, MB_REG_WRITE);
/* If an error occured convert it into a Modbus exception. */
if (eRegStatus != MB_ENOERR)
{
eStatus = prveMBError2Exception(eRegStatus);
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBMasterFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
UCHAR *ucMBFrame;
USHORT usRegAddress;
USHORT usRegCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, and it's read mode. This request don't need execute. */
if ( xMBMasterRequestIsBroadcast() )
{
eStatus = MB_EX_NONE;
}
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] << 8 );
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usRegCount >= 1 ) && ( 2 * usRegCount == pucFrame[MB_PDU_FUNC_READ_BYTECNT_OFF] ) )
{
/* Make callback to fill the buffer. */
eRegStatus = eMBMasterRegHoldingCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usRegCount, MB_REG_READ );
if(eMBMasterGetErrorType() == EV_ERROR_RESPOND_TIMEOUT) nReqTimeOut++;
vMBMasterSetErrorType(EV_NO_ERROR);
populate(&list_RTC, (DeviceElement){(uint32_t)ucMBMasterGetDestAddress(), "RTC", CONNECTED, nReqTimeOut, nReqs, 3, usRegAddress, usRegCount, 0, 0});
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
populate(&list_RTC, (DeviceElement){(uint32_t)ucMBMasterGetDestAddress(), "RTC(E)", CONNECTIONLESS, nReqTimeOut, nReqs, 3, usRegAddress, usRegCount, 0, 0});
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
populate(&list_RTC, (DeviceElement){(uint32_t)ucMBMasterGetDestAddress(), "RTC(IDV)", CONNECTIONLESS, nReqTimeOut, nReqs, 3, usRegAddress, usRegCount, 0, 0});
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException eMBMasterFuncWriteCoil(uint8_t *pucFrame, uint16_t *usLen)
{
uint16_t usRegAddress;
uint8_t ucBuf[2];
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if (*usLen == (MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN))
{
usRegAddress = (uint16_t) (pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8);
usRegAddress |= (uint16_t) (pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1]);
usRegAddress++;
if ((pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00) &&
((pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF) ||
(pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00)))
{
ucBuf[1] = 0;
if (pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF)
{
ucBuf[0] = 1;
}
else
{
ucBuf[0] = 0;
}
eRegStatus = eMBMasterRegCoilsCB(&ucBuf[0], usRegAddress, 1,
MB_REG_WRITE);
/* If an error occured convert it into a Modbus exception. */
if (eRegStatus != MB_ENOERR)
{
eStatus = prveMBError2Exception(eRegStatus);
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length is
* incorrect.
*/
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBMasterFuncReadInputRegister_2( UCHAR * pucFrame, USHORT * usLen )
{
UCHAR *ucMBFrame;
USHORT usRegAddress;
USHORT usRegCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, and it's read mode. This request don't need execute. */
if ( xMBMasterRequestIsBroadcast_2() )
{
eStatus = MB_EX_NONE;
}
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
{
vMBMasterGetPDUSndBuf_2(&ucMBFrame);
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] << 8 );
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usRegCount >= 1 ) && ( 2 * usRegCount == pucFrame[MB_PDU_FUNC_READ_BYTECNT_OFF] ) )
{
/* Make callback to fill the buffer. */
eRegStatus = eMBMasterRegInputCB_2( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usRegCount );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBFuncReadWriteMultipleHoldingRegister( uint8_t * pucFrame, uint16_t * usLen )
{
uint16_t usRegReadAddress;
uint16_t usRegReadCount;
uint16_t usRegWriteAddress;
uint16_t usRegWriteCount;
uint8_t ucRegWriteByteCount;
uint8_t *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen >= ( MB_PDU_FUNC_READWRITE_SIZE_MIN + MB_PDU_SIZE_MIN ) )
{
usRegReadAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF] << 8U );
usRegReadAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF + 1] );
usRegReadAddress++;
usRegReadCount = ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF] << 8U );
usRegReadCount |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF + 1] );
usRegWriteAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF] << 8U );
usRegWriteAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF + 1] );
usRegWriteAddress++;
usRegWriteCount = ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF] << 8U );
usRegWriteCount |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF + 1] );
ucRegWriteByteCount = pucFrame[MB_PDU_FUNC_READWRITE_BYTECNT_OFF];
if( ( usRegReadCount >= 1 ) && ( usRegReadCount <= 0x7D ) &&
( usRegWriteCount >= 1 ) && ( usRegWriteCount <= 0x79 ) &&
( ( 2 * usRegWriteCount ) == ucRegWriteByteCount ) )
{
/* Make callback to update the register values. */
eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF],
usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
if( eRegStatus == MB_ENOERR )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READWRITE_MULTIPLE_REGISTERS;
*usLen += 1;
/* Second byte in the response contain the number of bytes. */
*pucFrameCur++ = ( uint8_t ) ( usRegReadCount * 2 );
*usLen += 1;
/* Make the read callback. */
eRegStatus =
eMBRegHoldingCB( pucFrameCur, usRegReadAddress, usRegReadCount, MB_REG_READ );
if( eRegStatus == MB_ENOERR )
{
*usLen += 2 * usRegReadCount;
}
}
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
return eStatus;
}
eMBException
eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usRegCount;
UCHAR *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
//usRegAddress++;
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usRegCount >= 1 )
&& ( usRegCount < MB_PDU_FUNC_READ_REGCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_INPUT_REGISTER;
*usLen += 1;
/* Second byte in the response contain the number of bytes. */
*pucFrameCur++ = ( UCHAR )( usRegCount * 2 );
*usLen += 1;
eRegStatus =
eMBRegInputCB( pucFrameCur, usRegAddress, usRegCount );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
*usLen += usRegCount * 2;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read input register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException
eMBFuncReadDiscreteInputs( uint8_t * pucFrame, uint16_t * usLen )
{
uint16_t usRegAddress;
uint16_t usDiscreteCnt;
uint8_t ucNBytes;
uint8_t *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
usRegAddress++;
usDiscreteCnt = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF] << 8 );
usDiscreteCnt |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usDiscreteCnt >= 1 ) &&
( usDiscreteCnt < MB_PDU_FUNC_READ_DISCCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_DISCRETE_INPUTS;
*usLen += 1;
/* Test if the quantity of coils is a multiple of 8. If not last
* byte is only partially field with unused coils set to zero. */
if( ( usDiscreteCnt & 0x0007 ) != 0 )
{
ucNBytes = ( uint8_t ) ( usDiscreteCnt / 8 + 1 );
}
else
{
ucNBytes = ( uint8_t ) ( usDiscreteCnt / 8 );
}
*pucFrameCur++ = ucNBytes;
*usLen += 1;
eRegStatus =
eMBRegDiscreteCB( pucFrameCur, usRegAddress, usDiscreteCnt );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting address
* and the quantity of registers. We reuse the old values in the
* buffer because they are still valid. */
*usLen += ucNBytes;;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
/**
-----------------------------------------------------------------------------------------------------------------------
eMBFuncWriteMultipleCoils
-----------------------------------------------------------------------------------------------------------------------
* Event Handler for GPI module
*
* @date DEC/02/2013
* @author FW_DEV_2
* @pre None
* @return None
************************************************************************************************************************
*/
eMBException eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usCoilCnt;
UCHAR ucByteCount;
UCHAR ucByteCountVerify;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen > ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
usRegAddress++;
usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
ucByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
/* Compute the number of expected bytes in the request. */
if( ( usCoilCnt & 0x0007 ) != 0 )
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
}
else
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
}
if( ( usCoilCnt >= 1 ) &&
( usCoilCnt <= MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ) &&
( ucByteCountVerify == ucByteCount ) )
{
eRegStatus =
eMBRegCoilsCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
usRegAddress, usCoilCnt, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting address
* and the quantity of registers. We reuse the old values in the
* buffer because they are still valid. */
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
eMBException eMBMasterFuncReadCoils(uint8_t *pucFrame, uint16_t *usLen)
{
uint8_t *ucMBFrame;
uint16_t usRegAddress;
uint16_t usCoilCount;
uint8_t ucByteCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, and it's read mode. This request don't need
* execute.
*/
if (xMBMasterRequestIsBroadcast())
{
eStatus = MB_EX_NONE;
}
else if (*usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN)
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegAddress = (uint16_t) (ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8);
usRegAddress |= (uint16_t) (ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1]);
usRegAddress++;
usCoilCount = (uint16_t) (ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF] << 8);
usCoilCount |= (uint16_t) (ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF + 1]);
/* Test if the quantity of coils is a multiple of 8. If not last byte is
* only partially field with unused coils set to zero.
*/
if ((usCoilCount & 0x0007) != 0)
{
ucByteCount = (uint8_t) (usCoilCount / 8 + 1);
}
else
{
ucByteCount = (uint8_t) (usCoilCount / 8);
}
/* Check if the number of registers to read is valid. If not return
* Modbus illegal data value exception.
*/
if ((usCoilCount >= 1) &&
(ucByteCount == pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF]))
{
/* Make callback to fill the buffer. */
eRegStatus =
eMBMasterRegCoilsCB(&pucFrame[MB_PDU_FUNC_READ_VALUES_OFF],
usRegAddress, usCoilCount, MB_REG_READ);
/* If an error occurred convert it into a Modbus exception. */
if (eRegStatus != MB_ENOERR)
{
eStatus = prveMBError2Exception(eRegStatus);
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read coil register request because the length is
* incorrect.
*/
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
