/*
* Main processing loop for reading lines of input
* and sending them to the backend.
*
* This loop is re-entrant. May be called by \i command
* which reads input from a file.
*/
int
MainLoop(FILE *source)
{
PsqlScanState scan_state; /* lexer working state */
PQExpBuffer query_buf; /* buffer for query being accumulated */
PQExpBuffer previous_buf; /* if there isn't anything in the new
* buffer yet, use this one for \e, etc. */
char *line; /* current line of input */
int added_nl_pos;
bool success;
volatile int successResult = EXIT_SUCCESS;
volatile backslashResult slashCmdStatus = CMD_UNKNOWN;
volatile promptStatus_t prompt_status = PROMPT_READY;
volatile int count_eof = 0;
volatile bool die_on_error = false;
/* Save the prior command source */
FILE *prev_cmd_source;
bool prev_cmd_interactive;
unsigned int prev_lineno;
/* Save old settings */
prev_cmd_source = pset.cur_cmd_source;
prev_cmd_interactive = pset.cur_cmd_interactive;
prev_lineno = pset.lineno;
/* Establish new source */
pset.cur_cmd_source = source;
pset.cur_cmd_interactive = ((source == stdin) && !pset.notty);
pset.lineno = 0;
/* Create working state */
scan_state = psql_scan_create();
query_buf = createPQExpBuffer();
previous_buf = createPQExpBuffer();
if (!query_buf || !previous_buf)
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/* main loop to get queries and execute them */
while (successResult == EXIT_SUCCESS)
{
/*
* Welcome code for Control-C
*/
if (cancel_pressed)
{
if (!pset.cur_cmd_interactive)
{
/*
* You get here if you stopped a script with Ctrl-C and a
* query cancel was issued. In that case we don't do the
* longjmp, so the query routine can finish nicely.
*/
successResult = EXIT_USER;
break;
}
cancel_pressed = false;
}
#ifndef WIN32
if (sigsetjmp(main_loop_jmp, 1) != 0)
{
/* got here with longjmp */
/* reset parsing state */
resetPQExpBuffer(query_buf);
psql_scan_finish(scan_state);
psql_scan_reset(scan_state);
count_eof = 0;
slashCmdStatus = CMD_UNKNOWN;
prompt_status = PROMPT_READY;
if (pset.cur_cmd_interactive)
putc('\n', stdout);
else
{
successResult = EXIT_USER;
break;
}
}
/*
* establish the control-C handler only after main_loop_jmp is
* ready
*/
pqsignal(SIGINT, handle_sigint); /* control-C => cancel */
#else /* WIN32 */
setup_cancel_handler();
#endif
fflush(stdout);
if (slashCmdStatus == CMD_NEWEDIT)
{
/*
* just returned from editing the line? then just copy to the
* input buffer
*/
line = pg_strdup(query_buf->data);
/* reset parsing state since we are rescanning whole line */
resetPQExpBuffer(query_buf);
psql_scan_reset(scan_state);
slashCmdStatus = CMD_UNKNOWN;
prompt_status = PROMPT_READY;
}
/*
* otherwise, get another line
*/
else if (pset.cur_cmd_interactive)
{
/* May need to reset prompt, eg after \r command */
if (query_buf->len == 0)
prompt_status = PROMPT_READY;
line = gets_interactive(get_prompt(prompt_status));
}
else
line = gets_fromFile(source);
/*
* query_buf holds query already accumulated. line is the
* malloc'd new line of input (note it must be freed before
* looping around!)
*/
/* No more input. Time to quit, or \i done */
if (line == NULL)
{
if (pset.cur_cmd_interactive)
{
/* This tries to mimic bash's IGNOREEOF feature. */
count_eof++;
if (count_eof < GetVariableNum(pset.vars, "IGNOREEOF", 0, 10, false))
{
if (!QUIET())
printf(gettext("Use \"\\q\" to leave %s.\n"), pset.progname);
continue;
}
puts(QUIET() ? "" : "\\q");
}
break;
}
count_eof = 0;
pset.lineno++;
/* nothing left on line? then ignore */
if (line[0] == '\0' && !psql_scan_in_quote(scan_state))
{
free(line);
continue;
}
/* echo back if flag is set */
if (!pset.cur_cmd_interactive &&
VariableEquals(pset.vars, "ECHO", "all"))
puts(line);
fflush(stdout);
/* insert newlines into query buffer between source lines */
if (query_buf->len > 0)
{
appendPQExpBufferChar(query_buf, '\n');
added_nl_pos = query_buf->len;
}
else
added_nl_pos = -1; /* flag we didn't add one */
/* Setting this will not have effect until next line. */
die_on_error = GetVariableBool(pset.vars, "ON_ERROR_STOP");
/*
* Parse line, looking for command separators.
*/
psql_scan_setup(scan_state, line, strlen(line));
success = true;
while (success || !die_on_error)
{
PsqlScanResult scan_result;
promptStatus_t prompt_tmp = prompt_status;
scan_result = psql_scan(scan_state, query_buf, &prompt_tmp);
prompt_status = prompt_tmp;
/*
* Send command if semicolon found, or if end of line and
* we're in single-line mode.
*/
if (scan_result == PSCAN_SEMICOLON ||
(scan_result == PSCAN_EOL &&
GetVariableBool(pset.vars, "SINGLELINE")))
{
/* execute query */
success = SendQuery(query_buf->data);
slashCmdStatus = success ? CMD_SEND : CMD_ERROR;
resetPQExpBuffer(previous_buf);
appendPQExpBufferStr(previous_buf, query_buf->data);
resetPQExpBuffer(query_buf);
added_nl_pos = -1;
/* we need not do psql_scan_reset() here */
}
else if (scan_result == PSCAN_BACKSLASH)
{
/* handle backslash command */
/*
* If we added a newline to query_buf, and nothing else
* has been inserted in query_buf by the lexer, then strip
* off the newline again. This avoids any change to
* query_buf when a line contains only a backslash
* command.
*/
if (query_buf->len == added_nl_pos)
query_buf->data[--query_buf->len] = '\0';
added_nl_pos = -1;
slashCmdStatus = HandleSlashCmds(scan_state,
query_buf->len > 0 ?
query_buf : previous_buf);
success = slashCmdStatus != CMD_ERROR;
if ((slashCmdStatus == CMD_SEND || slashCmdStatus == CMD_NEWEDIT) &&
query_buf->len == 0)
{
/* copy previous buffer to current for handling */
appendPQExpBufferStr(query_buf, previous_buf->data);
}
if (slashCmdStatus == CMD_SEND)
{
success = SendQuery(query_buf->data);
resetPQExpBuffer(previous_buf);
appendPQExpBufferStr(previous_buf, query_buf->data);
resetPQExpBuffer(query_buf);
/* flush any paren nesting info after forced send */
psql_scan_reset(scan_state);
}
if (slashCmdStatus == CMD_TERMINATE)
break;
}
/* fall out of loop if lexer reached EOL */
if (scan_result == PSCAN_INCOMPLETE ||
scan_result == PSCAN_EOL)
break;
}
psql_scan_finish(scan_state);
free(line);
if (slashCmdStatus == CMD_TERMINATE)
{
successResult = EXIT_SUCCESS;
break;
}
if (!pset.cur_cmd_interactive)
{
if (!success && die_on_error)
successResult = EXIT_USER;
/* Have we lost the db connection? */
else if (!pset.db)
successResult = EXIT_BADCONN;
}
} /* while !endoffile/session */
/*
* Process query at the end of file without a semicolon
*/
if (query_buf->len > 0 && !pset.cur_cmd_interactive &&
successResult == EXIT_SUCCESS)
{
success = SendQuery(query_buf->data);
if (!success && die_on_error)
successResult = EXIT_USER;
else if (pset.db == NULL)
successResult = EXIT_BADCONN;
}
/*
* Reset SIGINT handler because main_loop_jmp will be invalid as soon
* as we exit this routine. If there is an outer MainLoop instance,
* it will re-enable ^C catching as soon as it gets back to the top of
* its loop and resets main_loop_jmp to point to itself.
*/
#ifndef WIN32
pqsignal(SIGINT, SIG_DFL);
#endif
destroyPQExpBuffer(query_buf);
destroyPQExpBuffer(previous_buf);
psql_scan_destroy(scan_state);
pset.cur_cmd_source = prev_cmd_source;
pset.cur_cmd_interactive = prev_cmd_interactive;
pset.lineno = prev_lineno;
return successResult;
} /* MainLoop() */
/*
* Main processing loop for reading lines of input
* and sending them to the backend.
*
* This loop is re-entrant. May be called by \i command
* which reads input from a file.
*/
int
MainLoop(FILE *source)
{
PsqlScanState scan_state; /* lexer working state */
volatile PQExpBuffer query_buf; /* buffer for query being accumulated */
volatile PQExpBuffer previous_buf; /* if there isn't anything in the new
* buffer yet, use this one for \e,
* etc. */
PQExpBuffer history_buf; /* earlier lines of a multi-line command, not
* yet saved to readline history */
char *line; /* current line of input */
int added_nl_pos;
bool success;
bool line_saved_in_history;
volatile int successResult = EXIT_SUCCESS;
volatile backslashResult slashCmdStatus = PSQL_CMD_UNKNOWN;
volatile promptStatus_t prompt_status = PROMPT_READY;
volatile int count_eof = 0;
volatile bool die_on_error = false;
/* Save the prior command source */
FILE *prev_cmd_source;
bool prev_cmd_interactive;
uint64 prev_lineno;
/* Save old settings */
prev_cmd_source = pset.cur_cmd_source;
prev_cmd_interactive = pset.cur_cmd_interactive;
prev_lineno = pset.lineno;
/* Establish new source */
pset.cur_cmd_source = source;
pset.cur_cmd_interactive = ((source == stdin) && !pset.notty);
pset.lineno = 0;
/* Create working state */
scan_state = psql_scan_create();
query_buf = createPQExpBuffer();
previous_buf = createPQExpBuffer();
history_buf = createPQExpBuffer();
if (PQExpBufferBroken(query_buf) ||
PQExpBufferBroken(previous_buf) ||
PQExpBufferBroken(history_buf))
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/* main loop to get queries and execute them */
while (successResult == EXIT_SUCCESS)
{
/*
* Clean up after a previous Control-C
*/
if (cancel_pressed)
{
if (!pset.cur_cmd_interactive)
{
/*
* You get here if you stopped a script with Ctrl-C.
*/
successResult = EXIT_USER;
break;
}
cancel_pressed = false;
}
/*
* Establish longjmp destination for exiting from wait-for-input. We
* must re-do this each time through the loop for safety, since the
* jmpbuf might get changed during command execution.
*/
if (sigsetjmp(sigint_interrupt_jmp, 1) != 0)
{
/* got here with longjmp */
/* reset parsing state */
psql_scan_finish(scan_state);
psql_scan_reset(scan_state);
resetPQExpBuffer(query_buf);
resetPQExpBuffer(history_buf);
count_eof = 0;
slashCmdStatus = PSQL_CMD_UNKNOWN;
prompt_status = PROMPT_READY;
cancel_pressed = false;
if (pset.cur_cmd_interactive)
putc('\n', stdout);
else
{
successResult = EXIT_USER;
break;
}
}
fflush(stdout);
/*
* get another line
*/
if (pset.cur_cmd_interactive)
{
/* May need to reset prompt, eg after \r command */
if (query_buf->len == 0)
prompt_status = PROMPT_READY;
line = gets_interactive(get_prompt(prompt_status));
}
else
{
line = gets_fromFile(source);
if (!line && ferror(source))
successResult = EXIT_FAILURE;
}
/*
* query_buf holds query already accumulated. line is the malloc'd
* new line of input (note it must be freed before looping around!)
*/
/* No more input. Time to quit, or \i done */
if (line == NULL)
{
if (pset.cur_cmd_interactive)
{
/* This tries to mimic bash's IGNOREEOF feature. */
count_eof++;
if (count_eof < GetVariableNum(pset.vars, "IGNOREEOF", 0, 10, false))
{
if (!pset.quiet)
printf(_("Use \"\\q\" to leave %s.\n"), pset.progname);
continue;
}
puts(pset.quiet ? "" : "\\q");
}
break;
}
count_eof = 0;
pset.lineno++;
/* ignore UTF-8 Unicode byte-order mark */
if (pset.lineno == 1 && pset.encoding == PG_UTF8 && strncmp(line, "\xef\xbb\xbf", 3) == 0)
memmove(line, line + 3, strlen(line + 3) + 1);
/* nothing left on line? then ignore */
if (line[0] == '\0' && !psql_scan_in_quote(scan_state))
{
free(line);
continue;
}
/* A request for help? Be friendly and give them some guidance */
if (pset.cur_cmd_interactive && query_buf->len == 0 &&
pg_strncasecmp(line, "help", 4) == 0 &&
(line[4] == '\0' || line[4] == ';' || isspace((unsigned char) line[4])))
{
free(line);
puts(_("You are using psql, the command-line interface to PostgreSQL."));
printf(_("Type: \\copyright for distribution terms\n"
" \\h for help with SQL commands\n"
" \\? for help with psql commands\n"
" \\g or terminate with semicolon to execute query\n"
" \\q to quit\n"));
fflush(stdout);
continue;
}
/* echo back if flag is set */
if (pset.echo == PSQL_ECHO_ALL && !pset.cur_cmd_interactive)
puts(line);
fflush(stdout);
/* insert newlines into query buffer between source lines */
if (query_buf->len > 0)
{
appendPQExpBufferChar(query_buf, '\n');
added_nl_pos = query_buf->len;
}
else
added_nl_pos = -1; /* flag we didn't add one */
/* Setting this will not have effect until next line. */
die_on_error = pset.on_error_stop;
/*
* Parse line, looking for command separators.
*/
psql_scan_setup(scan_state, line, strlen(line));
success = true;
line_saved_in_history = false;
while (success || !die_on_error)
{
PsqlScanResult scan_result;
promptStatus_t prompt_tmp = prompt_status;
scan_result = psql_scan(scan_state, query_buf, &prompt_tmp);
prompt_status = prompt_tmp;
if (PQExpBufferBroken(query_buf))
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/*
* Send command if semicolon found, or if end of line and we're in
* single-line mode.
*/
if (scan_result == PSCAN_SEMICOLON ||
(scan_result == PSCAN_EOL && pset.singleline))
{
/*
* Save query in history. We use history_buf to accumulate
* multi-line queries into a single history entry.
*/
if (pset.cur_cmd_interactive && !line_saved_in_history)
{
pg_append_history(line, history_buf);
pg_send_history(history_buf);
line_saved_in_history = true;
}
/* execute query */
success = SendQuery(query_buf->data);
slashCmdStatus = success ? PSQL_CMD_SEND : PSQL_CMD_ERROR;
/* transfer query to previous_buf by pointer-swapping */
{
PQExpBuffer swap_buf = previous_buf;
previous_buf = query_buf;
query_buf = swap_buf;
}
resetPQExpBuffer(query_buf);
added_nl_pos = -1;
/* we need not do psql_scan_reset() here */
}
else if (scan_result == PSCAN_BACKSLASH)
{
/* handle backslash command */
/*
* If we added a newline to query_buf, and nothing else has
* been inserted in query_buf by the lexer, then strip off the
* newline again. This avoids any change to query_buf when a
* line contains only a backslash command. Also, in this
* situation we force out any previous lines as a separate
* history entry; we don't want SQL and backslash commands
* intermixed in history if at all possible.
*/
if (query_buf->len == added_nl_pos)
{
query_buf->data[--query_buf->len] = '\0';
pg_send_history(history_buf);
}
added_nl_pos = -1;
/* save backslash command in history */
if (pset.cur_cmd_interactive && !line_saved_in_history)
{
pg_append_history(line, history_buf);
pg_send_history(history_buf);
line_saved_in_history = true;
}
/* execute backslash command */
slashCmdStatus = HandleSlashCmds(scan_state,
query_buf->len > 0 ?
query_buf : previous_buf);
success = slashCmdStatus != PSQL_CMD_ERROR;
if ((slashCmdStatus == PSQL_CMD_SEND || slashCmdStatus == PSQL_CMD_NEWEDIT) &&
query_buf->len == 0)
{
/* copy previous buffer to current for handling */
appendPQExpBufferStr(query_buf, previous_buf->data);
}
if (slashCmdStatus == PSQL_CMD_SEND)
{
success = SendQuery(query_buf->data);
/* transfer query to previous_buf by pointer-swapping */
{
PQExpBuffer swap_buf = previous_buf;
previous_buf = query_buf;
query_buf = swap_buf;
}
resetPQExpBuffer(query_buf);
/* flush any paren nesting info after forced send */
psql_scan_reset(scan_state);
}
else if (slashCmdStatus == PSQL_CMD_NEWEDIT)
{
/* rescan query_buf as new input */
psql_scan_finish(scan_state);
free(line);
line = pg_strdup(query_buf->data);
resetPQExpBuffer(query_buf);
/* reset parsing state since we are rescanning whole line */
psql_scan_reset(scan_state);
psql_scan_setup(scan_state, line, strlen(line));
line_saved_in_history = false;
prompt_status = PROMPT_READY;
}
else if (slashCmdStatus == PSQL_CMD_TERMINATE)
break;
}
/* fall out of loop if lexer reached EOL */
if (scan_result == PSCAN_INCOMPLETE ||
scan_result == PSCAN_EOL)
break;
}
/* Add line to pending history if we didn't execute anything yet */
if (pset.cur_cmd_interactive && !line_saved_in_history)
pg_append_history(line, history_buf);
psql_scan_finish(scan_state);
free(line);
if (slashCmdStatus == PSQL_CMD_TERMINATE)
{
successResult = EXIT_SUCCESS;
break;
}
if (!pset.cur_cmd_interactive)
{
if (!success && die_on_error)
successResult = EXIT_USER;
/* Have we lost the db connection? */
else if (!pset.db)
successResult = EXIT_BADCONN;
}
} /* while !endoffile/session */
/*
* Process query at the end of file without a semicolon
*/
if (query_buf->len > 0 && !pset.cur_cmd_interactive &&
successResult == EXIT_SUCCESS)
{
/* save query in history */
if (pset.cur_cmd_interactive)
pg_send_history(history_buf);
/* execute query */
success = SendQuery(query_buf->data);
if (!success && die_on_error)
successResult = EXIT_USER;
else if (pset.db == NULL)
successResult = EXIT_BADCONN;
}
/*
* Let's just make real sure the SIGINT handler won't try to use
* sigint_interrupt_jmp after we exit this routine. If there is an outer
* MainLoop instance, it will reset sigint_interrupt_jmp to point to
* itself at the top of its loop, before any further interactive input
* happens.
*/
sigint_interrupt_enabled = false;
destroyPQExpBuffer(query_buf);
destroyPQExpBuffer(previous_buf);
destroyPQExpBuffer(history_buf);
psql_scan_destroy(scan_state);
pset.cur_cmd_source = prev_cmd_source;
pset.cur_cmd_interactive = prev_cmd_interactive;
pset.lineno = prev_lineno;
return successResult;
} /* MainLoop() */
/*
* Main processing loop for reading lines of input
* and sending them to the backend.
*
* This loop is re-entrant. May be called by \i command
* which reads input from a file.
*/
int
MainLoop(FILE *source)
{
PsqlScanState scan_state; /* lexer working state */
ConditionalStack cond_stack; /* \if status stack */
volatile PQExpBuffer query_buf; /* buffer for query being accumulated */
volatile PQExpBuffer previous_buf; /* if there isn't anything in the new
* buffer yet, use this one for \e,
* etc. */
PQExpBuffer history_buf; /* earlier lines of a multi-line command, not
* yet saved to readline history */
char *line; /* current line of input */
int added_nl_pos;
bool success;
bool line_saved_in_history;
volatile int successResult = EXIT_SUCCESS;
volatile backslashResult slashCmdStatus = PSQL_CMD_UNKNOWN;
volatile promptStatus_t prompt_status = PROMPT_READY;
volatile int count_eof = 0;
volatile bool die_on_error = false;
FILE *prev_cmd_source;
bool prev_cmd_interactive;
uint64 prev_lineno;
/* Save the prior command source */
prev_cmd_source = pset.cur_cmd_source;
prev_cmd_interactive = pset.cur_cmd_interactive;
prev_lineno = pset.lineno;
/* pset.stmt_lineno does not need to be saved and restored */
/* Establish new source */
pset.cur_cmd_source = source;
pset.cur_cmd_interactive = ((source == stdin) && !pset.notty);
pset.lineno = 0;
pset.stmt_lineno = 1;
/* Create working state */
scan_state = psql_scan_create(&psqlscan_callbacks);
cond_stack = conditional_stack_create();
psql_scan_set_passthrough(scan_state, (void *) cond_stack);
query_buf = createPQExpBuffer();
previous_buf = createPQExpBuffer();
history_buf = createPQExpBuffer();
if (PQExpBufferBroken(query_buf) ||
PQExpBufferBroken(previous_buf) ||
PQExpBufferBroken(history_buf))
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/* main loop to get queries and execute them */
while (successResult == EXIT_SUCCESS)
{
/*
* Clean up after a previous Control-C
*/
if (cancel_pressed)
{
if (!pset.cur_cmd_interactive)
{
/*
* You get here if you stopped a script with Ctrl-C.
*/
successResult = EXIT_USER;
break;
}
cancel_pressed = false;
}
/*
* Establish longjmp destination for exiting from wait-for-input. We
* must re-do this each time through the loop for safety, since the
* jmpbuf might get changed during command execution.
*/
if (sigsetjmp(sigint_interrupt_jmp, 1) != 0)
{
/* got here with longjmp */
/* reset parsing state */
psql_scan_finish(scan_state);
psql_scan_reset(scan_state);
resetPQExpBuffer(query_buf);
resetPQExpBuffer(history_buf);
count_eof = 0;
slashCmdStatus = PSQL_CMD_UNKNOWN;
prompt_status = PROMPT_READY;
pset.stmt_lineno = 1;
cancel_pressed = false;
if (pset.cur_cmd_interactive)
{
putc('\n', stdout);
/*
* if interactive user is in an \if block, then Ctrl-C will
* exit from the innermost \if.
*/
if (!conditional_stack_empty(cond_stack))
{
psql_error("\\if: escaped\n");
conditional_stack_pop(cond_stack);
}
}
else
{
successResult = EXIT_USER;
break;
}
}
fflush(stdout);
/*
* get another line
*/
if (pset.cur_cmd_interactive)
{
/* May need to reset prompt, eg after \r command */
if (query_buf->len == 0)
prompt_status = PROMPT_READY;
line = gets_interactive(get_prompt(prompt_status, cond_stack),
query_buf);
}
else
{
line = gets_fromFile(source);
if (!line && ferror(source))
successResult = EXIT_FAILURE;
}
/*
* query_buf holds query already accumulated. line is the malloc'd
* new line of input (note it must be freed before looping around!)
*/
/* No more input. Time to quit, or \i done */
if (line == NULL)
{
if (pset.cur_cmd_interactive)
{
/* This tries to mimic bash's IGNOREEOF feature. */
count_eof++;
if (count_eof < pset.ignoreeof)
{
if (!pset.quiet)
printf(_("Use \"\\q\" to leave %s.\n"), pset.progname);
continue;
}
puts(pset.quiet ? "" : "\\q");
}
break;
}
count_eof = 0;
pset.lineno++;
/* ignore UTF-8 Unicode byte-order mark */
if (pset.lineno == 1 && pset.encoding == PG_UTF8 && strncmp(line, "\xef\xbb\xbf", 3) == 0)
memmove(line, line + 3, strlen(line + 3) + 1);
/* Detect attempts to run custom-format dumps as SQL scripts */
if (pset.lineno == 1 && !pset.cur_cmd_interactive &&
strncmp(line, "PGDMP", 5) == 0)
{
free(line);
puts(_("The input is a PostgreSQL custom-format dump.\n"
"Use the pg_restore command-line client to restore this dump to a database.\n"));
fflush(stdout);
successResult = EXIT_FAILURE;
break;
}
/* no further processing of empty lines, unless within a literal */
if (line[0] == '\0' && !psql_scan_in_quote(scan_state))
{
free(line);
continue;
}
/* A request for help? Be friendly and give them some guidance */
if (pset.cur_cmd_interactive && query_buf->len == 0 &&
pg_strncasecmp(line, "help", 4) == 0 &&
(line[4] == '\0' || line[4] == ';' || isspace((unsigned char) line[4])))
{
free(line);
puts(_("You are using psql, the command-line interface to PostgreSQL."));
printf(_("Type: \\copyright for distribution terms\n"
" \\h for help with SQL commands\n"
" \\? for help with psql commands\n"
" \\g or terminate with semicolon to execute query\n"
" \\q to quit\n"));
fflush(stdout);
continue;
}
/* echo back if flag is set, unless interactive */
if (pset.echo == PSQL_ECHO_ALL && !pset.cur_cmd_interactive)
{
puts(line);
fflush(stdout);
}
/* insert newlines into query buffer between source lines */
if (query_buf->len > 0)
{
appendPQExpBufferChar(query_buf, '\n');
added_nl_pos = query_buf->len;
}
else
added_nl_pos = -1; /* flag we didn't add one */
/* Setting this will not have effect until next line. */
die_on_error = pset.on_error_stop;
/*
* Parse line, looking for command separators.
*/
psql_scan_setup(scan_state, line, strlen(line),
pset.encoding, standard_strings());
success = true;
line_saved_in_history = false;
while (success || !die_on_error)
{
PsqlScanResult scan_result;
promptStatus_t prompt_tmp = prompt_status;
size_t pos_in_query;
char *tmp_line;
pos_in_query = query_buf->len;
scan_result = psql_scan(scan_state, query_buf, &prompt_tmp);
prompt_status = prompt_tmp;
if (PQExpBufferBroken(query_buf))
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/*
* Increase statement line number counter for each linebreak added
* to the query buffer by the last psql_scan() call. There only
* will be ones to add when navigating to a statement in
* readline's history containing newlines.
*/
tmp_line = query_buf->data + pos_in_query;
while (*tmp_line != '\0')
{
if (*(tmp_line++) == '\n')
pset.stmt_lineno++;
}
if (scan_result == PSCAN_EOL)
pset.stmt_lineno++;
/*
* Send command if semicolon found, or if end of line and we're in
* single-line mode.
*/
if (scan_result == PSCAN_SEMICOLON ||
(scan_result == PSCAN_EOL && pset.singleline))
{
/*
* Save line in history. We use history_buf to accumulate
* multi-line queries into a single history entry. Note that
* history accumulation works on input lines, so it doesn't
* matter whether the query will be ignored due to \if.
*/
if (pset.cur_cmd_interactive && !line_saved_in_history)
{
pg_append_history(line, history_buf);
pg_send_history(history_buf);
line_saved_in_history = true;
}
/* execute query unless we're in an inactive \if branch */
if (conditional_active(cond_stack))
{
success = SendQuery(query_buf->data);
slashCmdStatus = success ? PSQL_CMD_SEND : PSQL_CMD_ERROR;
pset.stmt_lineno = 1;
/* transfer query to previous_buf by pointer-swapping */
{
PQExpBuffer swap_buf = previous_buf;
previous_buf = query_buf;
query_buf = swap_buf;
}
resetPQExpBuffer(query_buf);
added_nl_pos = -1;
/* we need not do psql_scan_reset() here */
}
else
{
/* if interactive, warn about non-executed query */
if (pset.cur_cmd_interactive)
psql_error("query ignored; use \\endif or Ctrl-C to exit current \\if block\n");
/* fake an OK result for purposes of loop checks */
success = true;
slashCmdStatus = PSQL_CMD_SEND;
pset.stmt_lineno = 1;
/* note that query_buf doesn't change state */
}
}
else if (scan_result == PSCAN_BACKSLASH)
{
/* handle backslash command */
/*
* If we added a newline to query_buf, and nothing else has
* been inserted in query_buf by the lexer, then strip off the
* newline again. This avoids any change to query_buf when a
* line contains only a backslash command. Also, in this
* situation we force out any previous lines as a separate
* history entry; we don't want SQL and backslash commands
* intermixed in history if at all possible.
*/
if (query_buf->len == added_nl_pos)
{
query_buf->data[--query_buf->len] = '\0';
pg_send_history(history_buf);
}
added_nl_pos = -1;
/* save backslash command in history */
if (pset.cur_cmd_interactive && !line_saved_in_history)
{
pg_append_history(line, history_buf);
pg_send_history(history_buf);
line_saved_in_history = true;
}
/* execute backslash command */
slashCmdStatus = HandleSlashCmds(scan_state,
cond_stack,
query_buf,
previous_buf);
success = slashCmdStatus != PSQL_CMD_ERROR;
/*
* Resetting stmt_lineno after a backslash command isn't
* always appropriate, but it's what we've done historically
* and there have been few complaints.
*/
pset.stmt_lineno = 1;
if (slashCmdStatus == PSQL_CMD_SEND)
{
/* should not see this in inactive branch */
Assert(conditional_active(cond_stack));
success = SendQuery(query_buf->data);
/* transfer query to previous_buf by pointer-swapping */
{
PQExpBuffer swap_buf = previous_buf;
previous_buf = query_buf;
query_buf = swap_buf;
}
resetPQExpBuffer(query_buf);
/* flush any paren nesting info after forced send */
psql_scan_reset(scan_state);
}
else if (slashCmdStatus == PSQL_CMD_NEWEDIT)
{
/* should not see this in inactive branch */
Assert(conditional_active(cond_stack));
/* rescan query_buf as new input */
psql_scan_finish(scan_state);
free(line);
line = pg_strdup(query_buf->data);
resetPQExpBuffer(query_buf);
/* reset parsing state since we are rescanning whole line */
psql_scan_reset(scan_state);
psql_scan_setup(scan_state, line, strlen(line),
pset.encoding, standard_strings());
line_saved_in_history = false;
prompt_status = PROMPT_READY;
}
else if (slashCmdStatus == PSQL_CMD_TERMINATE)
break;
}
/* fall out of loop if lexer reached EOL */
if (scan_result == PSCAN_INCOMPLETE ||
scan_result == PSCAN_EOL)
break;
}
/* Add line to pending history if we didn't execute anything yet */
if (pset.cur_cmd_interactive && !line_saved_in_history)
pg_append_history(line, history_buf);
psql_scan_finish(scan_state);
free(line);
if (slashCmdStatus == PSQL_CMD_TERMINATE)
{
successResult = EXIT_SUCCESS;
break;
}
if (!pset.cur_cmd_interactive)
{
if (!success && die_on_error)
successResult = EXIT_USER;
/* Have we lost the db connection? */
else if (!pset.db)
successResult = EXIT_BADCONN;
}
} /* while !endoffile/session */
/*
* If we have a non-semicolon-terminated query at the end of file, we
* process it unless the input source is interactive --- in that case it
* seems better to go ahead and quit. Also skip if this is an error exit.
*/
if (query_buf->len > 0 && !pset.cur_cmd_interactive &&
successResult == EXIT_SUCCESS)
{
/* save query in history */
/* currently unneeded since we don't use this block if interactive */
#ifdef NOT_USED
if (pset.cur_cmd_interactive)
pg_send_history(history_buf);
#endif
/* execute query unless we're in an inactive \if branch */
if (conditional_active(cond_stack))
{
success = SendQuery(query_buf->data);
}
else
{
if (pset.cur_cmd_interactive)
psql_error("query ignored; use \\endif or Ctrl-C to exit current \\if block\n");
success = true;
}
if (!success && die_on_error)
successResult = EXIT_USER;
else if (pset.db == NULL)
successResult = EXIT_BADCONN;
}
/*
* Check for unbalanced \if-\endifs unless user explicitly quit, or the
* script is erroring out
*/
if (slashCmdStatus != PSQL_CMD_TERMINATE &&
successResult != EXIT_USER &&
!conditional_stack_empty(cond_stack))
{
psql_error("reached EOF without finding closing \\endif(s)\n");
if (die_on_error && !pset.cur_cmd_interactive)
successResult = EXIT_USER;
}
/*
* Let's just make real sure the SIGINT handler won't try to use
* sigint_interrupt_jmp after we exit this routine. If there is an outer
* MainLoop instance, it will reset sigint_interrupt_jmp to point to
* itself at the top of its loop, before any further interactive input
* happens.
*/
sigint_interrupt_enabled = false;
destroyPQExpBuffer(query_buf);
destroyPQExpBuffer(previous_buf);
destroyPQExpBuffer(history_buf);
psql_scan_destroy(scan_state);
conditional_stack_destroy(cond_stack);
pset.cur_cmd_source = prev_cmd_source;
pset.cur_cmd_interactive = prev_cmd_interactive;
pset.lineno = prev_lineno;
return successResult;
} /* MainLoop() */