/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
static int
do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
siginfo_t info;
int signr;
unsigned long single_stepping = ptrace_cancel_bpt(current);
struct k_sigaction ka;
if (!oldset)
oldset = ¤t->blocked;
/* This lets the debugger run, ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* ... so re-check the single stepping. */
single_stepping |= ptrace_cancel_bpt(current);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (r0) syscall_restart(r0, r19, regs, &ka);
handle_signal(signr, &ka, &info, oldset, regs, sw);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return 1;
}
if (r0) {
switch (regs->r0) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* Reset v0 and a3 and replay syscall. */
regs->r0 = r0;
regs->r19 = r19;
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
/* Force v0 to the restart syscall and reply. */
regs->r0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
static void
do_signal(struct pt_regs *regs, unsigned long r0, unsigned long r19)
{
siginfo_t info;
int signr;
unsigned long single_stepping = ptrace_cancel_bpt(current);
struct k_sigaction ka;
/* This lets the debugger run, ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* ... so re-check the single stepping. */
single_stepping |= ptrace_cancel_bpt(current);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (r0)
syscall_restart(r0, r19, regs, &ka);
handle_signal(signr, &ka, &info, regs);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return;
}
if (r0) {
switch (regs->r0) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* Reset v0 and a3 and replay syscall. */
regs->r0 = r0;
regs->r19 = r19;
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
/* Force v0 to the restart syscall and reply. */
regs->r0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* If there's no signal to deliver, we just restore the saved mask. */
restore_saved_sigmask();
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
siginfo_t info;
int signr;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (current->flags & PF_FREEZE) {
refrigerator(0);
goto no_signal;
}
if (current->ptrace & PT_SINGLESTEP)
ptrace_cancel_bpt(current);
signr = get_signal_to_deliver(&info, regs, NULL);
if (signr > 0) {
handle_signal(signr, &info, oldset, regs, syscall);
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
return 1;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall;
regs->ARM_pc -= 2;
} else {
u32 __user *usp;
regs->ARM_sp -= 12;
usp = (u32 __user *)regs->ARM_sp;
put_user(regs->ARM_pc, &usp[0]);
/* swi __NR_restart_syscall */
put_user(0xef000000 | __NR_restart_syscall, &usp[1]);
/* ldr pc, [sp], #12 */
put_user(0xe49df00c, &usp[2]);
flush_icache_range((unsigned long)usp,
(unsigned long)(usp + 3));
regs->ARM_pc = regs->ARM_sp + 4;
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
static void
do_signal(struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
siginfo_t info;
int signr;
unsigned long single_stepping = ptrace_cancel_bpt(current);
struct k_sigaction ka;
sigset_t *oldset;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
/* This lets the debugger run, ... */
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
/* ... so re-check the single stepping. */
single_stepping |= ptrace_cancel_bpt(current);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (r0)
syscall_restart(r0, r19, regs, &ka);
if (handle_signal(signr, &ka, &info, oldset, regs, sw) == 0) {
/* A signal was successfully delivered, and the
saved sigmask was stored on the signal frame,
and will be restored by sigreturn. So we can
simply clear the restore sigmask flag. */
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return;
}
if (r0) {
switch (regs->r0) {
case ERESTARTNOHAND:
case ERESTARTSYS:
case ERESTARTNOINTR:
/* Reset v0 and a3 and replay syscall. */
regs->r0 = r0;
regs->r19 = r19;
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
/* Force v0 to the restart syscall and reply. */
regs->r0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* If there's no signal to deliver, we just restore the saved mask. */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction *ka;
siginfo_t info;
int single_stepping;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (!oldset)
oldset = ¤t->blocked;
single_stepping = ptrace_cancel_bpt(current);
for (;;) {
unsigned long signr;
spin_lock_irq (¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq (¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sigaddset(¤t->pending.signal, signr);
recalc_sigpending(current);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
}
/* Are we from a system call? */
if (syscall) {
switch (regs->ARM_r0) {
case -ERESTARTNOHAND:
regs->ARM_r0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ARM_r0 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc -= 4;
}
}
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
if (single_stepping)
ptrace_set_bpt(current);
return 1;
}
if (syscall &&
(regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR)) {
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc -= 4;
}
if (single_stepping)
ptrace_set_bpt(current);
return 0;
}
static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (try_to_freeze())
goto no_signal;
/*
*FIXME: I don't know how to trace TriMedia executable.
*/
#if 0
if (current->ptrace & PT_SINGLESTEP)
ptrace_cancel_bpt(current);
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_signal(signr, &ka, &info, oldset, regs, syscall);
/*
*FIXME: I don't know how to trace TriMedia executable.
*/
#if 0
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
#endif
return 1;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->r5 == -ERESTART_RESTARTBLOCK) {
regs->r5=__NR_restart_syscall;
regs->dpc=regs->spc;
}
if (regs->r5 == -ERESTARTNOHAND ||
regs->r5 == -ERESTARTSYS ||
regs->r5 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
/*
*FIXME: I don't know how to trace TriMedia executable.
*/
#if 0
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
#endif
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
asmlinkage int
do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
unsigned long single_stepping = ptrace_cancel_bpt(current);
if (!oldset)
oldset = ¤t->blocked;
while (1) {
unsigned long signr;
struct k_sigaction *ka;
siginfo_t info;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr & 0x7f;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT:
case SIGCHLD:
case SIGWINCH:
continue;
case SIGTSTP:
case SIGTTIN:
case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1]
.sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
continue;
case SIGQUIT:
case SIGILL:
case SIGTRAP:
case SIGABRT:
case SIGFPE:
case SIGSEGV:
case SIGBUS:
case SIGSYS:
case SIGXCPU:
case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
lock_kernel();
sigaddset(¤t->pending.signal, signr);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
continue;
}
/* Whee! Actually deliver the signal. */
if (r0) syscall_restart(r0, r19, regs, ka);
handle_signal(signr, ka, &info, oldset, regs, sw);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return 1;
}
if (r0 &&
(regs->r0 == ERESTARTNOHAND ||
regs->r0 == ERESTARTSYS ||
regs->r0 == ERESTARTNOINTR)) {
regs->r0 = r0; /* reset v0 and a3 and replay syscall */
regs->r19 = r19;
regs->pc -= 4;
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
#ifdef CONFIG_PREEMPT_RT
/*
* Fully-preemptible kernel does not need interrupts disabled:
*/
local_irq_enable();
preempt_check_resched();
#endif
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (try_to_freeze())
goto no_signal;
if (current->ptrace & PT_SINGLESTEP)
ptrace_cancel_bpt(current);
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_signal(signr, &ka, &info, oldset, regs, syscall);
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
return 1;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
regs->ARM_pc -= 2;
} else {
#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
regs->ARM_r7 = __NR_restart_syscall;
regs->ARM_pc -= 4;
#else
u32 __user *usp;
u32 swival = __NR_restart_syscall;
regs->ARM_sp -= 12;
usp = (u32 __user *)regs->ARM_sp;
/*
* Either we supports OABI only, or we have
* EABI with the OABI compat layer enabled.
* In the later case we don't know if user
* space is EABI or not, and if not we must
* not clobber r7. Always using the OABI
* syscall solves that issue and works for
* all those cases.
*/
swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
put_user(regs->ARM_pc, &usp[0]);
/* swi __NR_restart_syscall */
put_user(0xef000000 | swival, &usp[1]);
/* ldr pc, [sp], #12 */
put_user(0xe49df00c, &usp[2]);
flush_icache_range((unsigned long)usp,
(unsigned long)(usp + 3));
regs->ARM_pc = regs->ARM_sp + 4;
#endif
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
return 0;
}