void displayTimers()
{
#if defined(TRANSLATIONS_CZ)
#define MAINTMR_LBL_COL (9*FW-FW/2-1)
#else
#define MAINTMR_LBL_COL (9*FW-FW/2+3)
#endif
// Main timer
if (g_model.timers[0].mode) {
TimerState & timerState = timersStates[0];
LcdFlags att = DBLSIZE | (timerState.val<0 ? BLINK|INVERS : 0);
putsTimer(12*FW+2+10*FWNUM-4, FH*2, timerState.val, att, att);
uint8_t xLabel = (timerState.val >= 0 ? MAINTMR_LBL_COL : MAINTMR_LBL_COL-7);
#if defined(CPUARM)
uint8_t len = zlen(g_model.timers[0].name, LEN_TIMER_NAME);
if (len > 0) {
xLabel += (LEN_TIMER_NAME-len)*FW;
lcd_putsnAtt(xLabel, FH*3, g_model.timers[0].name, len, ZCHAR);
}
else {
putsTimerMode(xLabel, FH*3, g_model.timers[0].mode);
}
#else
putsTimerMode(xLabel, FH*3, g_model.timers[0].mode);
#endif
}
}
void editTimerMode(int timerIdx, coord_t y, LcdFlags attr, uint8_t event)
{
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, menuHorizontalPosition==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, menuHorizontalPosition==1 ? attr|TIMEHOUR : TIMEHOUR, menuHorizontalPosition==2 ? attr|TIMEHOUR : TIMEHOUR);
if (attr && menuHorizontalPosition < 0) drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, 11*FW, FH+1);
if (attr && s_editMode>0) {
div_t qr = div(timer->start, 60);
switch (menuHorizontalPosition) {
case 0:
{
swsrc_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
swsrc_t val = timer->mode - (TMRMODE_COUNT-1);
swsrc_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
qr.quot = checkIncDec(event, qr.quot, 0, 1439, EE_MODEL | NO_INCDEC_MARKS); // 23h59
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
if ((int32_t)timer->start > 86399) timer->start=86399; // 23h59:59
break;
}
}
}
void editTimerMode(int timerIdx, coord_t y, LcdFlags attr, uint8_t event)
{
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && m_posHorz < 0) drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, FH+1);
if (attr && s_editMode>0) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
{
swsrc_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
swsrc_t val = timer->mode - (TMRMODE_COUNT-1);
swsrc_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
break;
}
}
}
void menuMainView(uint8_t event)
{
STICK_SCROLL_DISABLE();
uint8_t view = g_eeGeneral.view;
uint8_t view_base = view & 0x0f;
switch(event) {
case EVT_ENTRY:
killEvents(KEY_EXIT);
killEvents(KEY_UP);
killEvents(KEY_DOWN);
break;
/* TODO if timer2 is OFF, it's possible to use this timer2 as in er9x...
case EVT_KEY_BREAK(KEY_MENU):
if (view_base == VIEW_TIMER2) {
Timer2_running = !Timer2_running;
AUDIO_KEYPAD_UP();
}
break;
*/
case EVT_KEY_BREAK(KEY_RIGHT):
case EVT_KEY_BREAK(KEY_LEFT):
if (view_base <= VIEW_INPUTS) {
#if defined(PCBSKY9X)
if (view_base == VIEW_INPUTS)
g_eeGeneral.view ^= ALTERNATE_VIEW;
else
g_eeGeneral.view = (g_eeGeneral.view + (4*ALTERNATE_VIEW) + ((event==EVT_KEY_BREAK(KEY_LEFT)) ? -ALTERNATE_VIEW : ALTERNATE_VIEW)) % (4*ALTERNATE_VIEW);
#else
g_eeGeneral.view ^= ALTERNATE_VIEW;
#endif
eeDirty(EE_GENERAL);
AUDIO_KEYPAD_UP();
}
break;
#if defined(NAVIGATION_MENUS)
case EVT_KEY_CONTEXT_MENU:
killEvents(event);
#if defined(CPUARM)
if (modelHasNotes()) {
MENU_ADD_ITEM(STR_VIEW_NOTES);
}
#endif
#if defined(CPUARM)
MENU_ADD_ITEM(STR_RESET_SUBMENU);
#else
MENU_ADD_ITEM(STR_RESET_TIMER1);
MENU_ADD_ITEM(STR_RESET_TIMER2);
#if defined(FRSKY)
MENU_ADD_ITEM(STR_RESET_TELEMETRY);
#endif
MENU_ADD_ITEM(STR_RESET_FLIGHT);
#endif
MENU_ADD_ITEM(STR_STATISTICS);
#if defined(CPUARM)
MENU_ADD_ITEM(STR_ABOUT_US);
#endif
menuHandler = onMainViewMenu;
break;
#endif
#if MENUS_LOCK != 2 /*no menus*/
case EVT_KEY_LONG(KEY_MENU):// go to last menu
pushMenu(lastPopMenu());
killEvents(event);
break;
CASE_EVT_ROTARY_BREAK
case EVT_KEY_MODEL_MENU:
pushMenu(menuModelSelect);
killEvents(event);
break;
CASE_EVT_ROTARY_LONG
case EVT_KEY_GENERAL_MENU:
pushMenu(menuGeneralSetup);
killEvents(event);
break;
#endif
case EVT_KEY_BREAK(KEY_UP):
case EVT_KEY_BREAK(KEY_DOWN):
g_eeGeneral.view = (event == EVT_KEY_BREAK(KEY_UP) ? (view_base == VIEW_COUNT-1 ? 0 : view_base+1) : (view_base == 0 ? VIEW_COUNT-1 : view_base-1));
eeDirty(EE_GENERAL);
AUDIO_KEYPAD_UP();
break;
case EVT_KEY_STATISTICS:
chainMenu(menuStatisticsView);
killEvents(event);
break;
case EVT_KEY_TELEMETRY:
#if defined(FRSKY)
if (!IS_FAI_ENABLED())
chainMenu(menuTelemetryFrsky);
#elif defined(JETI)
JETI_EnableRXD(); // enable JETI-Telemetry reception
chainMenu(menuTelemetryJeti);
#elif defined(ARDUPILOT)
ARDUPILOT_EnableRXD(); // enable ArduPilot-Telemetry reception
chainMenu(menuTelemetryArduPilot);
#elif defined(NMEA)
NMEA_EnableRXD(); // enable NMEA-Telemetry reception
chainMenu(menuTelemetryNMEA);
#elif defined(MAVLINK)
chainMenu(menuTelemetryMavlink);
#else
chainMenu(menuStatisticsDebug);
#endif
killEvents(event);
break;
case EVT_KEY_FIRST(KEY_EXIT):
#if defined(GVARS) && !defined(PCBSTD)
if (s_gvar_timer > 0) {
s_gvar_timer = 0;
}
#endif
if (view == VIEW_TIMER2) {
timerReset(1);
}
AUDIO_KEYPAD_UP();
break;
#if !defined(NAVIGATION_MENUS)
case EVT_KEY_LONG(KEY_EXIT):
flightReset();
AUDIO_KEYPAD_UP();
break;
#endif
}
{
// Flight Mode Name
uint8_t mode = mixerCurrentFlightMode;
lcd_putsnAtt(PHASE_X, PHASE_Y, g_model.flightModeData[mode].name, sizeof(g_model.flightModeData[mode].name), ZCHAR|PHASE_FLAGS);
// Model Name
putsModelName(MODELNAME_X, MODELNAME_Y, g_model.header.name, g_eeGeneral.currModel, BIGSIZE);
// Main Voltage (or alarm if any)
displayVoltageOrAlarm();
// Timers
displayTimers();
// Trims sliders
displayTrims(mode);
}
if (view_base < VIEW_INPUTS) {
// scroll bar
lcd_hlineStip(38, 34, 54, DOTTED);
#if defined(PCBSKY9X)
lcd_hline(38 + (g_eeGeneral.view / ALTERNATE_VIEW) * 13, 34, 13, SOLID);
#else
lcd_hline((g_eeGeneral.view & ALTERNATE_VIEW) ? 64 : 38, 34, 26, SOLID);
#endif
for (uint8_t i=0; i<8; i++) {
uint8_t x0,y0;
#if defined(PCBSKY9X)
uint8_t chan = 8*(g_eeGeneral.view / ALTERNATE_VIEW) + i;
#else
uint8_t chan = (g_eeGeneral.view & ALTERNATE_VIEW) ? 8+i : i;
#endif
int16_t val = channelOutputs[chan];
switch(view_base)
{
case VIEW_OUTPUTS_VALUES:
x0 = (i%4*9+3)*FW/2;
y0 = i/4*FH+40;
#if defined(PPM_UNIT_US)
lcd_outdezAtt(x0+4*FW , y0, PPM_CH_CENTER(chan)+val/2, 0);
#elif defined(PPM_UNIT_PERCENT_PREC1)
lcd_outdezAtt(x0+4*FW , y0, calcRESXto1000(val), PREC1);
#else
lcd_outdezAtt(x0+4*FW , y0, calcRESXto1000(val)/10, 0); // G: Don't like the decimal part*
#endif
break;
case VIEW_OUTPUTS_BARS:
#define WBAR2 (50/2)
x0 = i<4 ? LCD_W/4+2 : LCD_W*3/4-2;
y0 = 38+(i%4)*5;
uint16_t lim = g_model.extendedLimits ? 640*2 : 512*2;
int8_t len = (abs(val) * WBAR2 + lim/2) / lim;
if(len>WBAR2) len = WBAR2; // prevent bars from going over the end - comment for debugging
lcd_hlineStip(x0-WBAR2, y0, WBAR2*2+1, DOTTED);
lcd_vline(x0,y0-2,5);
if (val>0)
x0+=1;
else
x0-=len;
lcd_hline(x0,y0+1,len);
lcd_hline(x0,y0-1,len);
break;
}
}
}
else if (view_base == VIEW_INPUTS) {
if (view == VIEW_INPUTS) {
// Sticks + Pots
doMainScreenGraphics();
// Switches
for (uint8_t i=SWSRC_THR; i<=SWSRC_TRN; i++) {
int8_t sw = (i == SWSRC_TRN ? (switchState(SW_ID0) ? SWSRC_ID0 : (switchState(SW_ID1) ? SWSRC_ID1 : SWSRC_ID2)) : i);
uint8_t x = 2*FW-2, y = i*FH+1;
if (i>=SWSRC_AIL) {
x = 17*FW-1;
y -= 3*FH;
}
putsSwitches(x, y, sw, getSwitch(i) ? INVERS : 0);
}
}
else {
#if defined(PCBMEGA2560) && defined(ROTARY_ENCODERS)
for (uint8_t i=0; i<NUM_ROTARY_ENCODERS; i++) {
int16_t val = getRotaryEncoder(i);
int8_t len = limit((int16_t)0, (int16_t)(((val+1024) * BAR_HEIGHT) / 2048), (int16_t)BAR_HEIGHT);
#if ROTARY_ENCODERS > 2
#define V_BAR_W 5
V_BAR(LCD_W/2-8+V_BAR_W*i, LCD_H-8, len);
#else
#define V_BAR_W 5
V_BAR(LCD_W/2-3+V_BAR_W*i, LCD_H-8, len);
#endif
}
#endif // PCBGRUVIN9X && ROTARY_ENCODERS
// Logical Switches
#if defined(PCBSKY9X)
for (uint8_t i=0; i<NUM_LOGICAL_SWITCH; i++) {
int8_t len = getSwitch(SWSRC_SW1+i) ? BAR_HEIGHT : 1;
uint8_t x = VSWITCH_X(i);
lcd_vline(x-1, VSWITCH_Y-len, len);
lcd_vline(x, VSWITCH_Y-len, len);
}
#elif defined(CPUM2560)
for (uint8_t i=0; i<NUM_LOGICAL_SWITCH; i++)
putsSwitches(2*FW-3 + (i/3)*(i/3>2 ? 3*FW+2 : (3*FW-1)) + (i/3>2 ? 2*FW : 0), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i) ? INVERS : 0);
#elif !defined(PCBSTD)
for (uint8_t i=0; i<NUM_LOGICAL_SWITCH; i++)
putsSwitches(2*FW-2 + (i/3)*(4*FW-1), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i) ? INVERS : 0);
#else
for (uint8_t i=0; i<NUM_LOGICAL_SWITCH; i++)
putsSwitches(2*FW-3 + (i/3)*(4*FW), 4*FH+1 + (i%3)*FH, SWSRC_SW1+i, getSwitch(SWSRC_SW1+i) ? INVERS : 0);
#endif
}
}
else { // timer2
#if defined(TRANSLATIONS_CZ)
#define TMR2_LBL_COL (20-FW/2+1)
#else
#define TMR2_LBL_COL (20-FW/2+5)
#endif
putsTimer(33+FW+2+10*FWNUM-4, FH*5, timersStates[1].val, DBLSIZE, DBLSIZE);
putsTimerMode(timersStates[1].val >= 0 ? TMR2_LBL_COL : TMR2_LBL_COL-7, FH*6, g_model.timers[1].mode);
// lcd_outdezNAtt(33+11*FW, FH*6, s_timerVal_10ms[1], LEADING0, 2); // 1/100s
}
// And ! in case of unexpected shutdown
if (unexpectedShutdown) {
lcd_putcAtt(REBOOT_X, 0*FH, '!', INVERS);
}
#if defined(GVARS) && !defined(PCBSTD)
if (s_gvar_timer > 0) {
s_gvar_timer--;
s_warning = STR_GLOBAL_VAR;
displayBox();
lcd_putsnAtt(16, 5*FH, g_model.gvars[s_gvar_last].name, LEN_GVAR_NAME, ZCHAR);
lcd_putsAtt(16+7*FW, 5*FH, PSTR("[\010]"), BOLD);
lcd_outdezAtt(16+7*FW+4*FW+FW/2, 5*FH, GVAR_VALUE(s_gvar_last, getGVarFlightPhase(mixerCurrentFlightMode, s_gvar_last)), BOLD);
s_warning = NULL;
}
#endif
#if defined(DSM2)
if (moduleFlag[0] == MODULE_BIND) {
// Issue 98
lcd_putsAtt(15*FW, 0, PSTR("BIND"), 0);
}
#endif
}
void menuModelSetup(uint8_t event)
{
#if defined(CPUARM)
#define IF_EXTERNAL_MODULE_XJT(x) (IS_MODULE_XJT(EXTERNAL_MODULE) ? (uint8_t)x : HIDDEN_ROW)
#define IF_EXTERNAL_MODULE_ON(x) (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_NONE ? HIDDEN_ROW : (uint8_t)(x))
#define IS_D8_RX(x) (g_model.moduleData[x].rfProtocol == RF_PROTO_D8)
#define EXTERNAL_MODULE_CHANNELS_ROWS() IF_EXTERNAL_MODULE_ON(IS_MODULE_DSM2(EXTERNAL_MODULE) ? (uint8_t)0 : (uint8_t)1)
#define EXTERNAL_MODULE_SETTINGS_ROWS() (IS_MODULE_XJT(EXTERNAL_MODULE) && IS_D8_RX(EXTERNAL_MODULE)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW
#if defined(PCBSKY9X) && defined(REVX)
#define OUTPUT_TYPE_ROWS() (IS_MODULE_PPM(EXTERNAL_MODULE) ? (uint8_t)0 : HIDDEN_ROW) ,
#else
#define OUTPUT_TYPE_ROWS()
#endif
#define TRAINER_CHANNELS_ROWS() (HIDDEN_ROW)
#define PORT_CHANNELS_ROWS(x) (x==EXTERNAL_MODULE ? EXTERNAL_MODULE_CHANNELS_ROWS() : 0)
#define FAILSAFE_ROWS(x) ((g_model.moduleData[x].rfProtocol==RF_PROTO_X16 || g_model.moduleData[x].rfProtocol==RF_PROTO_LR12) ? (g_model.moduleData[x].failsafeMode==FAILSAFE_CUSTOM ? (uint8_t)1 : (uint8_t)0) : HIDDEN_ROW)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES (1+ITEM_MODEL_SETUP_MAX)
#define POT_WARN_ITEMS() ((g_model.nPotsToWarn >> 6) ? (uint8_t)NUM_POTS : (uint8_t)0)
#define TIMER_ROWS 2, 0, CASE_PERSISTENT_TIMERS(0) 0, 0
#if (defined(PCBSKY9X) && !defined(REVA) && !defined(REVX))
#define EXTRA_MODULE_ROWS LABEL(ExtraModule), 1, 2,
#else
#define EXTRA_MODULE_ROWS
#endif
#define TRAINER_MODULE_ROWS
MENU_TAB({ 0, 0, TIMER_ROWS, TIMER_ROWS, TIMER_ROWS, 0, 1, 0, 0, 0, 0, 0, CASE_CPUARM(LABEL(PreflightCheck)) CASE_CPUARM(0) 0, 6, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, 0, LABEL(ExternalModule), (IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0, EXTERNAL_MODULE_CHANNELS_ROWS(), EXTERNAL_MODULE_SETTINGS_ROWS(), OUTPUT_TYPE_ROWS() IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)), EXTRA_MODULE_ROWS TRAINER_MODULE_ROWS });
#elif defined(CPUM64)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, CASE_PCBSKY9X(1) CASE_PCBSKY9X(2) });
#endif
MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);
#if defined(CPUARM) && (defined(DSM2) || defined(PXX))
if (menuEvent) {
moduleFlag[0] = 0;
#if NUM_MODULES > 1
moduleFlag[1] = 0;
#endif
}
#endif
TITLE(STR_MENUSETUP);
uint8_t sub = m_posVert - 1;
int8_t editMode = s_editMode;
for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+s_pgOfs;
#if defined(CPUARM)
for (int j=0; j<=k; j++) {
if (mstate_tab[j+1] == HIDDEN_ROW) {
if (++k >= (int)DIM(mstate_tab)) {
return;
}
}
}
#endif
LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
#if defined(CPUARM)
memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
#endif
break;
#if defined(CPUARM)
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER3:
{
unsigned int timerIdx = (k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0));
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
{
int8_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
int8_t val = timer->mode - (TMRMODE_COUNT-1);
int8_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
break;
}
}
break;
}
case ITEM_MODEL_TIMER1_NAME:
case ITEM_MODEL_TIMER2_NAME:
case ITEM_MODEL_TIMER3_NAME:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, timer->name, sizeof(timer->name), event, attr);
break;
}
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER3_MINUTE_BEEP:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
}
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, timer->countdownBeep, 0, 2, attr, event);
break;
}
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
case ITEM_MODEL_TIMER3_PERSISTENT:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer->persistent, 0, 2, attr, event);
break;
}
#else
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
{
TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
}
else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
}
else {
putsStrIdx(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
break;
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
break;
}
}
}
break;
}
#if defined(CPUM2560)
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
{
TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
break;
}
#endif
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, m_posHorz<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, m_posHorz>0 && !s_noHi ? attr : 0);
if (attr && m_posHorz>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
s_noHi = NO_HI_LEN;
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
#endif
break;
#if defined(CPUARM)
case ITEM_MODEL_DISPLAY_TRIMS:
g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
break;
#endif
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcd_putsLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
#if defined(CPUARM)
case ITEM_MODEL_PREFLIGHT_LABEL:
lcd_putsLeft(y, STR_PREFLIGHT);
break;
case ITEM_MODEL_CHECKLIST_DISPLAY:
ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
break;
#endif
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
case ITEM_MODEL_SWITCHES_WARNING:
{
lcd_putsLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
g_model.switchWarningEnable ^= (1 << m_posHorz);
eeDirty(EE_MODEL);
#else
if (m_posHorz < NUM_SWITCHES-1) {
g_model.switchWarningEnable ^= (1 << m_posHorz);
eeDirty(EE_MODEL);
}
#endif
break;
case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
#else
if (m_posHorz == NUM_SWITCHES-1) {
s_noHi = NO_HI_LEN;
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
#endif
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
attr = 0;
if (IS_3POS(i)) {
c = '0'+(states & 0x03);
states >>= 2;
}
else {
if ((states & 0x01) && swactive)
attr = INVERS;
c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
states >>= 1;
}
if (line && (m_posHorz == i)) {
attr = BLINK;
if (swactive)
attr |= INVERS;
}
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (m_posHorz == NUM_SWITCHES-1 && !s_noHi) ? line : 0);
#endif
}
break;
}
case ITEM_MODEL_BEEP_CENTER:
lcd_putsLeft(y, STR_BEEPCTR);
for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
// TODO flash saving, \001 not needed in STR_RETA123
coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
lcd_putsiAtt(x, y, STR_RETA123, i, ((m_posHorz==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<m_posHorz);
eeDirty(EE_MODEL);
}
}
}
break;
#if defined(CPUARM)
case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
break;
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_LABEL:
lcd_putsLeft(y, "RF Port 2 (PPM)");
break;
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_EXTERNALRF);
break;
case ITEM_MODEL_EXTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, m_posHorz==0 ? attr : 0);
if (IS_MODULE_XJT(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
if (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
else
g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
}
break;
case 1:
if (IS_MODULE_DSM2(EXTERNAL_MODULE))
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
else
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
}
}
}
break;
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_CHANNELS:
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, STR_CHANNELRANGE);
if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, m_posHorz==0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (m_posHorz==0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (m_posHorz==1 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
break;
}
}
}
break;
}
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_BIND:
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_BIND:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
if (IS_MODULE_PPM(moduleIdx)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
break;
}
}
}
else {
horzpos_t l_posHorz = m_posHorz;
coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
if (IS_MODULE_XJT(moduleIdx) && IS_D8_RX(moduleIdx)) {
xOffsetBind = 0;
lcd_putsLeft(y, INDENT "Receiver");
if (attr) l_posHorz += 1;
}
else {
lcd_putsLeft(y, STR_RXNUM);
}
if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && l_posHorz==0) {
if (editMode>0 || p1valdiff) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
if (checkIncDec_Ret) {
modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
}
}
if (editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
}
}
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
uint8_t newFlag = 0;
if (attr && l_posHorz>0 && s_editMode>0) {
if (l_posHorz == 1)
newFlag = MODULE_BIND;
else if (l_posHorz == 2) {
newFlag = MODULE_RANGECHECK;
}
}
moduleFlag[moduleIdx] = newFlag;
}
}
break;
}
#endif
#if defined(PCBSKY9X) && defined(REVX)
case ITEM_MODEL_EXTERNAL_MODULE_OUTPUT_TYPE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
moduleData.ppmOutputType = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_OUTPUT_TYPE, STR_VOUTPUT_TYPE, moduleData.ppmOutputType, 0, 1, attr, event);
break;
}
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, TR_FAILSAFE);
if (IS_MODULE_XJT(moduleIdx)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, m_posHorz==0 ? attr : 0);
if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, m_posHorz==1 ? attr : 0);
if (attr) {
if (moduleData.failsafeMode != FAILSAFE_CUSTOM)
m_posHorz = 0;
if (m_posHorz==0) {
if (editMode>0 || p1valdiff) {
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
}
}
else if (m_posHorz==1) {
s_editMode = 0;
if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
g_moduleIdx = moduleIdx;
pushMenu(menuModelFailsafe);
}
}
else {
drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
}
}
}
break;
}
#endif
#if !defined(CPUARM)
case ITEM_MODEL_PPM1_PROTOCOL:
lcd_putsLeft(y, NO_INDENT(STR_PROTO));
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, m_posHorz<=0 ? attr : 0);
if (IS_PPM_PROTOCOL(protocol)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, m_posHorz!=0 ? attr : 0);
}
else if (m_posHorz>0 && attr) {
MOVE_CURSOR_FROM_HERE();
}
if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
g_model.ppmFrameLength = g_model.ppmNCH * 8;
break;
}
}
break;
#endif
#if 0
case ITEM_MODEL_PPM2_PROTOCOL:
lcd_putsLeft(y, PSTR("Port2"));
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, m_posHorz<=0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (m_posHorz<=0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (m_posHorz!=0 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
}
}
break;
case ITEM_MODEL_PPM2_PARAMS:
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (m_posHorz < 0 || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (m_posHorz < 0 || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
break;
}
}
break;
#endif
#if !defined(CPUARM)
case ITEM_MODEL_PPM1_PARAMS:
if (IS_PPM_PROTOCOL(protocol)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
break;
}
}
}
#if defined(DSM2) || defined(PXX)
else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
if (attr && m_posHorz > 1) {
REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
}
lcd_putsLeft(y, STR_RXNUM);
lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (m_posHorz<=0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && (m_posHorz==0 && (editMode>0 || p1valdiff))) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
}
#if defined(PXX)
if (protocol == PROTO_PXX) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, m_posHorz!=0 ? attr : 0);
uint8_t newFlag = 0;
if (attr && m_posHorz>0 && editMode>0) {
// send reset code
newFlag = MODULE_BIND;
}
moduleFlag[0] = newFlag;
}
#endif
#if defined(DSM2)
if (IS_DSM2_PROTOCOL(protocol)) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, m_posHorz!=0 ? attr : 0);
moduleFlag[0] = (attr && m_posHorz>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
}
#endif
}
#endif
break;
#endif
}
}
