/*
* update the info frames with the data from the current display mode
*/
void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
struct hdmi_avi_infoframe frame;
uint32_t offset;
ssize_t err;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
offset = dig->afmt->offset;
r600_audio_set_clock(encoder, mode->clock);
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND); /* send null packets when required */
WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000);
if (ASIC_IS_DCE32(rdev)) {
WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
WREG32(AFMT_AUDIO_PACKET_CONTROL + offset,
AFMT_AUDIO_SAMPLE_SEND | /* send audio packets */
AFMT_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
} else {
WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
}
WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */
HDMI0_ACR_SOURCE); /* select SW CTS value */
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND | /* send null packets when required */
HDMI0_GC_SEND | /* send general control packets */
HDMI0_GC_CONT); /* send general control packets every frame */
/* TODO: HDMI0_AUDIO_INFO_UPDATE */
WREG32(HDMI0_INFOFRAME_CONTROL0 + offset,
HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */
HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI0_AUDIO_INFO_CONT); /* send audio info frames every frame/field */
WREG32(HDMI0_INFOFRAME_CONTROL1 + offset,
HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */
HDMI0_AUDIO_INFO_LINE(2)); /* anything other than 0 */
WREG32(HDMI0_GC + offset, 0); /* unset HDMI0_GC_AVMUTE */
err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
if (err < 0) {
DRM_ERROR("failed to setup AVI infoframe: %zd\n", err);
return;
}
err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
DRM_ERROR("failed to pack AVI infoframe: %zd\n", err);
return;
}
r600_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer));
r600_hdmi_update_ACR(encoder, mode->clock);
/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
WREG32(HDMI0_RAMP_CONTROL0 + offset, 0x00FFFFFF);
WREG32(HDMI0_RAMP_CONTROL1 + offset, 0x007FFFFF);
WREG32(HDMI0_RAMP_CONTROL2 + offset, 0x00000001);
WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001);
r600_hdmi_audio_workaround(encoder);
}
/*
* update the info frames with the data from the current display mode
*/
void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
struct hdmi_avi_infoframe frame;
uint32_t offset;
uint32_t acr_ctl;
ssize_t err;
if (!dig || !dig->afmt)
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
offset = dig->afmt->offset;
/* disable audio prior to setting up hw */
dig->afmt->pin = r600_audio_get_pin(rdev);
r600_audio_enable(rdev, dig->afmt->pin, false);
r600_audio_set_dto(encoder, mode->clock);
WREG32_P(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
HDMI0_60958_CS_UPDATE, /* allow 60958 channel status fields to be updated */
~(HDMI0_AUDIO_SAMPLE_SEND |
HDMI0_AUDIO_DELAY_EN_MASK |
HDMI0_AUDIO_PACKETS_PER_LINE_MASK |
HDMI0_60958_CS_UPDATE));
/* DCE 3.0 uses register that's normally for CRC_CONTROL */
acr_ctl = ASIC_IS_DCE3(rdev) ? DCE3_HDMI0_ACR_PACKET_CONTROL :
HDMI0_ACR_PACKET_CONTROL;
WREG32_P(acr_ctl + offset,
HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
HDMI0_ACR_AUTO_SEND, /* allow hw to sent ACR packets when required */
~(HDMI0_ACR_SOURCE |
HDMI0_ACR_AUTO_SEND));
WREG32_OR(HDMI0_VBI_PACKET_CONTROL + offset,
HDMI0_NULL_SEND | /* send null packets when required */
HDMI0_GC_SEND | /* send general control packets */
HDMI0_GC_CONT); /* send general control packets every frame */
WREG32_OR(HDMI0_INFOFRAME_CONTROL0 + offset,
HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */
HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI0_AUDIO_INFO_UPDATE); /* required for audio info values to be updated */
WREG32_P(HDMI0_INFOFRAME_CONTROL1 + offset,
HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */
HDMI0_AUDIO_INFO_LINE(2), /* anything other than 0 */
~(HDMI0_AVI_INFO_LINE_MASK |
HDMI0_AUDIO_INFO_LINE_MASK));
WREG32_AND(HDMI0_GC + offset,
~HDMI0_GC_AVMUTE); /* unset HDMI0_GC_AVMUTE */
err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
if (err < 0) {
DRM_ERROR("failed to setup AVI infoframe: %zd\n", err);
return;
}
err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
if (err < 0) {
DRM_ERROR("failed to pack AVI infoframe: %zd\n", err);
return;
}
r600_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer));
/* fglrx duplicates INFOFRAME_CONTROL0 & INFOFRAME_CONTROL1 ops here */
WREG32_AND(HDMI0_GENERIC_PACKET_CONTROL + offset,
~(HDMI0_GENERIC0_SEND |
HDMI0_GENERIC0_CONT |
HDMI0_GENERIC0_UPDATE |
HDMI0_GENERIC1_SEND |
HDMI0_GENERIC1_CONT |
HDMI0_GENERIC0_LINE_MASK |
HDMI0_GENERIC1_LINE_MASK));
r600_hdmi_update_ACR(encoder, mode->clock);
WREG32_P(HDMI0_60958_0 + offset,
HDMI0_60958_CS_CHANNEL_NUMBER_L(1),
~(HDMI0_60958_CS_CHANNEL_NUMBER_L_MASK |
HDMI0_60958_CS_CLOCK_ACCURACY_MASK));
WREG32_P(HDMI0_60958_1 + offset,
HDMI0_60958_CS_CHANNEL_NUMBER_R(2),
~HDMI0_60958_CS_CHANNEL_NUMBER_R_MASK);
/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
WREG32(HDMI0_RAMP_CONTROL0 + offset, 0x00FFFFFF);
WREG32(HDMI0_RAMP_CONTROL1 + offset, 0x007FFFFF);
WREG32(HDMI0_RAMP_CONTROL2 + offset, 0x00000001);
WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001);
/* enable audio after to setting up hw */
r600_audio_enable(rdev, dig->afmt->pin, true);
}