int
md_pre_update(void)
{
struct mbr_partition *part;
mbr_info_t *ext;
int i;
if (get_ramsize() <= 32)
set_swap(diskdev, NULL);
read_mbr(diskdev, &mbr);
/* do a sanity check of the partition table */
for (ext = &mbr; ext; ext = ext->extended) {
part = ext->mbr.mbr_parts;
for (i = 0; i < MBR_PART_COUNT; part++, i++) {
if (part->mbrp_type != MBR_PTYPE_FAT12)
continue;
if (part->mbrp_size < (MIN_FAT12_BOOT / 512)) {
msg_display(MSG_boottoosmall);
msg_display_add(MSG_nobootpart, 0);
process_menu(MENU_yesno, NULL);
if (!yesno)
return 0;
nobootfs = 1;
}
}
}
if (md_check_partitions() == 0)
nobootfs = 1;
return 1;
}
static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
{
int sector_size;
char *mbrbuf_ptr, *mbrbuf_end;
u32 buf_base, mbr_base;
extern char _end[];
u16 mbr_magic;
sector_size = ei->params.bytes_per_sector;
if (!sector_size)
sector_size = 512;
buf_base = (ds() << 4) + (u32)&_end;
mbr_base = (buf_base+sector_size-1) & ~(sector_size-1);
mbrbuf_ptr = _end + (mbr_base-buf_base);
mbrbuf_end = mbrbuf_ptr + sector_size;
if (!(boot_params.hdr.loadflags & CAN_USE_HEAP))
return -1;
if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
return -1;
memset(mbrbuf_ptr, 0, sector_size);
if (read_mbr(devno, mbrbuf_ptr))
return -1;
*mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
mbr_magic = *(u16 *)&mbrbuf_ptr[510];
return mbr_magic == 0xAA55 ? 0 : -1;
}
void rdisk_list_partitions(unsigned char type)
{
int i,j;
int e;
struct buf *bp;
struct mbr *mbr;
for(i=0; i<NRDSK; i++)
{
e = init_device(i,S_SILENT);
if(e!=0)
continue;
printf("Disk: rd%d: %d KB\n",i,rdsize(makedev(i,0)));
bp = read_mbr(i);
if(!bp)
continue;
mbr = (struct mbr *)bp->b_addr;
for(j=1; j<5; j++)
{
if(mbr->partitions[j-1].type==type)
{
printf(" rd%d%c: %d KB\n",i,'a'+j-1,rdsize(makedev(i,j)));
}
}
brelse(bp);
}
}
/*
* partition_table_get - reads partition table structure from the device
* and creates disk description structure
*
* PARAMETERS:
* dev_name - path to physical device in /dev filesystem
* disk_desc - returned disc description structure
*
* RETURNS:
* RTEMS_SUCCESSFUL if success,
* RTEMS_INTERNAL_ERROR otherwise
*/
static rtems_status_code
partition_table_get(const char *dev_name, rtems_disk_desc_t *disk_desc)
{
struct stat dev_stat;
rtems_status_code rc;
int fd;
fd = open(dev_name, O_RDONLY);
if (fd < 0)
{
return RTEMS_INTERNAL_ERROR;
}
rc = fstat(fd, &dev_stat);
if (rc != RTEMS_SUCCESSFUL)
{
close(fd);
return RTEMS_INTERNAL_ERROR;
}
strncpy (disk_desc->dev_name, dev_name, 15);
disk_desc->dev = dev_stat.st_rdev;
disk_desc->sector_size = (dev_stat.st_blksize) ? dev_stat.st_blksize :
RTEMS_IDE_SECTOR_SIZE;
rc = read_mbr(fd, disk_desc);
close(fd);
return rc;
}
int
md_get_info(void)
{
struct disklabel disklabel;
int fd;
char dev_name[100];
if (boardtype == BOARD_TYPE_RPI)
return set_bios_geom_with_mbr_guess();
if (pm->no_mbr)
return 1;
if (read_mbr(pm->diskdev, &mbr) < 0)
memset(&mbr.mbr, 0, sizeof(mbr.mbr)-2);
if (edit_mbr(&mbr) == 0)
return 0;
if (strncmp(pm->diskdev, "wd", 2) == 0)
pm->disktype = "ST506";
else
pm->disktype = "SCSI";
snprintf(dev_name, 100, "/dev/r%sc", pm->diskdev);
fd = open(dev_name, O_RDONLY, 0);
if (fd < 0) {
endwin();
fprintf(stderr, "Can't open %s\n", dev_name);
exit(1);
}
if (ioctl(fd, DIOCGDINFO, &disklabel) == -1) {
endwin();
fprintf(stderr, "Can't read disklabel on %s.\n", dev_name);
close(fd);
exit(1);
}
close(fd);
pm->dlcyl = disklabel.d_ncylinders;
pm->dlhead = disklabel.d_ntracks;
pm->dlsec = disklabel.d_nsectors;
pm->sectorsize = disklabel.d_secsize;
pm->dlcylsize = disklabel.d_secpercyl;
/*
* Compute whole disk size. Take max of (pm->dlcyl*pm->dlhead*pm->dlsec)
* and secperunit, just in case the disk is already labelled.
* (If our new label's RAW_PART size ends up smaller than the
* in-core RAW_PART size value, updating the label will fail.)
*/
pm->dlsize = pm->dlcyl*pm->dlhead*pm->dlsec;
if (disklabel.d_secperunit > pm->dlsize)
pm->dlsize = disklabel.d_secperunit;
return 1;
}
dev_t get_swap_device()
{
// If a swap device has been specified, then we can short cut all this and just
// use that device.
#ifdef SWAP
return SWAP;
#else
dev_t bd = -1;
int i,j,e;
unsigned int max_size = 0;
struct buf *bp;
struct mbr *mbr;
// First we look for the first active swap device
for(i=0; i<NRDSK; i++)
{
e = rdopen(makedev(i,0),0,S_SILENT);
if(e==0)
{
bp = read_mbr(i);
if(bp)
{
mbr = (struct mbr *)bp->b_addr;
for(j=0; j<4; j++)
{
if(mbr->partitions[j].type==RDISK_SWAP)
{
// If this partition is the biggest so far
// then store it. We'll use this if
// there is no active partition.
if(mbr->partitions[j].lbalength>max_size)
{
max_size = mbr->partitions[j].lbalength;
bd = makedev(i,j+1);
}
// If it is active, then use it.
if(mbr->partitions[j].status & P_ACTIVE)
{
brelse(bp);
rdclose(makedev(i,0),0,0);
return makedev(i,j+1);
}
}
}
brelse(bp);
}
rdclose(makedev(i,0),0,0);
}
}
// There is no active partition, so we'll use the biggest one we found.
return bd;
#endif
}
int main(int argc, char const *argv[]) {
int i,
s,
fc,
fs,
res;
const char * n;
/* Checking arguments */
s = fc = fs = -1;
n = NULL;
if (argc < 5) {
usage(argv[0]);
}
for (i = 1; i < argc; i++) {
if (!strcmp("-s", argv[i])) {
s = strtol(argv[++i], NULL, 10);
} else if (!strcmp("-fc", argv[i])) {
fc = strtol(argv[++i], NULL, 10);
} else if (!strcmp("-fs", argv[i])) {
fs = strtol(argv[++i], NULL, 10);
} else if (!strcmp("-n", argv[i])) {
n = argv[++i];
} else {
usage(argv[0]);
}
}
if (s == -1 || fc == -1) {
usage(argv[0]);
}
/* Checking for idiotic input */
if (fc == 0 && fs == 0) {
fprintf(stderr, "Wrong input: cannot write on the Master Boot Record, use other values than (0, 0).\n");
}
/* Default values */
if (fs == -1) {
fs = 0;
}
/* Start modifying the mbr */
read_mbr();
/* Creating a new volume */
res = create_volume(s, fc, fs, n);
display_all_volume_name();
/* End of all modifications, saving them */
save_mbr();
return res;
}
static inline int init_device(int root,int flag)
{
int i;
int e;
if(root>MAXDEV) return ENODEV;
struct buf *bp;
struct mbr *mbr;
int unit = disks[root].unit;
e = disks[root].init(unit,flag);
if(e!=0)
return e;
DEBUG8("rd%d: about to read mbr\n",root);
bp = read_mbr(root);
if(!bp)
return ENXIO;
DEBUG8("rd%d: mbr read\n",root);
mbr = (struct mbr *)bp->b_addr;
DEBUG5("rd%d: partition types: %02X %02X %02X %02X\n",root,
mbr->partitions[0].type,
mbr->partitions[1].type,
mbr->partitions[2].type,
mbr->partitions[3].type
);
DEBUG8("rd%d: partition 1 start: %p length: %p\n",root,
mbr->partitions[0].lbastart, mbr->partitions[0].lbalength
);
DEBUG8("rd%d: partition 2 start: %p length: %p\n",root,
mbr->partitions[1].lbastart, mbr->partitions[1].lbalength
);
DEBUG8("rd%d: partition 3 start: %p length: %p\n",root,
mbr->partitions[2].lbastart, mbr->partitions[2].lbalength
);
DEBUG8("rd%d: partition 4 start: %p length: %p\n",root,
mbr->partitions[3].lbastart, mbr->partitions[3].lbalength
);
for(i=0; i<4; i++)
{
dflags[root].start[i] = mbr->partitions[i].lbastart>>1;
dflags[root].len[i] = mbr->partitions[i].lbalength>>1;
}
dflags[root].blocks = disks[root].size(unit);
brelse(bp);
return 0;
}
void dump_vols(void){
read_mbr();
int i;
printf("Volume\tCylindre\tSecteur\tNb blocs\tType\n-----------------------------------------------------------\n");
for (i=0; i<mbr.mbr_n_vol; i++){
printf("sda%d\t%d\t\t%d\t%d\t\t%s\n",
i,
mbr.mbr_vol[i].vol_first_cylinder,
mbr.mbr_vol[i].vol_first_sector,
mbr.mbr_vol[i].vol_nblocs,
display_type(mbr.mbr_vol[i].vol_type));
}
}
static Cyg_ErrNo
disk_connected(struct cyg_devtab_entry *tab,
cyg_disk_identify_t *ident)
{
disk_channel *chan = (disk_channel *) tab->priv;
cyg_disk_info_t *info = chan->info;
Cyg_ErrNo res = ENOERR;
//diag_printf("file test:disk_connected\n");
if (!chan->init)
{D(("chan->init is false\n"));return -EINVAL;}
// If the device is already connected, nothing more to do
if( info->connected )
{D(("info->connected is true\n"));return ENOERR;}
// If any of these assertions fire, it is probable that the
// hardware driver has not been updated to match the current disk
// API.
CYG_ASSERT( ident->lba_sectors_num > 0, "Bad LBA sector count" );
CYG_ASSERT( ident->phys_block_size > 0, "Bad physical block size");
CYG_ASSERT( ident->max_transfer > 0, "Bad max transfer size");
info->ident = *ident;
info->block_size = ident->phys_block_size;
info->blocks_num = ident->lba_sectors_num;
info->phys_block_size = ident->phys_block_size;
D(("disk connected\n"));
//D((" serial = '%s'\n", ident->serial));
//D((" firmware rev = '%s'\n", ident->firmware_rev));
//D((" model num = '%s'\n", ident->model_num));
D((" block_size = %d\n", info->block_size));
D((" blocks_num = %u\n", info->blocks_num));
D((" phys_block_size = %d\n", info->phys_block_size));
if (chan->mbr_support)
{
// read disk master boot record
res = read_mbr(chan);
}
if (ENOERR == res)
{
// now declare that we are connected
info->connected = true;
chan->valid = true;
}
D(("file test:disk_connected end\n"));
return res;
}
static int dos_get_disk_signature(struct param_d *p, void *_priv)
{
struct disk_signature_priv *priv = _priv;
struct block_device *blk = priv->blk;
void *buf;
buf = read_mbr(blk);
if (!buf)
return -EIO;
priv->signature = get_unaligned_le32(buf + 0x1b8);
free(buf);
return 0;
}
UINTN showpart(VOID)
{
UINTN status = 0;
UINTN status_gpt, status_mbr;
// get full information from disk
status_gpt = read_gpt();
status_mbr = read_mbr();
if (status_gpt != 0 || status_mbr != 0)
return (status_gpt || status_mbr);
// analyze all partitions
status = analyze_parts();
if (status != 0)
return status;
return status;
}
dev_t get_boot_device()
{
// If a root device has been specified, then we can short cut all this and just
// use that device.
#ifdef ROOT
return ROOT;
#else
dev_t bd = -1;
int i,j,e;
struct buf *bp;
struct mbr *mbr;
for(i=0; i<NRDSK; i++)
{
e = rdopen(makedev(i,0),0,S_SILENT);
if(e==0)
{
bp = read_mbr(i);
if(bp)
{
mbr = (struct mbr *)bp->b_addr;
for(j=0; j<4; j++)
{
if(mbr->partitions[j].type==RDISK_FS)
{
if(mbr->partitions[j].status & P_ACTIVE)
{
brelse(bp);
rdclose(makedev(i,0),0,0);
return makedev(i,j+1);
}
}
}
brelse(bp);
}
rdclose(makedev(i,0),0,0);
}
}
return bd;
#endif
}
int edit_record(char *device_name, uint64_t offset) {
if (offset == 0) {
mbr_t mbr;
read_mbr(device_name, &mbr);
if (OKAY == edit_mbr_loop(&mbr) && are_you_sure() == YES) {
write_mbr(device_name, &mbr);
}
}
else {
ebr_t ebr;
read_ebr(device_name, offset, &ebr);
if (OKAY == edit_ebr_loop(&ebr) && are_you_sure() == YES) {
write_ebr(device_name, offset, &ebr);
}
}
return OKAY;
}
UINTN gptsync(VOID)
{
UINTN status = 0;
UINTN status_gpt, status_mbr;
BOOLEAN proceed = FALSE;
Print(L"gptsync version %s\ncopyright (c) 2006-2007 Christoph Pfisterer & 2013 Roderick W. Smith\n", VERSION);
// get full information from disk
status_gpt = read_gpt();
status_mbr = read_mbr();
if (status_gpt != 0 || status_mbr != 0)
return (status_gpt || status_mbr);
// cross-check current situation
Print(L"\n");
status = check_gpt(); // check GPT for consistency
if (status != 0)
return status;
status = check_mbr(); // check MBR for consistency
if (status != 0)
return status;
status = analyze(); // analyze the situation & compose new MBR table
if (status != 0)
return status;
if (new_mbr_part_count == 0)
return status;
// offer user the choice what to do
status = input_boolean(STR("\nMay I update the MBR as printed above? [y/N] "), &proceed);
if (status != 0 || proceed != TRUE)
return status;
// adjust the MBR and write it back
status = write_mbr();
if (status != 0)
return status;
return status;
}
static int dos_set_disk_signature(struct param_d *p, void *_priv)
{
struct disk_signature_priv *priv = _priv;
struct block_device *blk = priv->blk;
void *buf;
__le32 *disksigp;
int ret;
buf = read_mbr(blk);
if (!buf)
return -EIO;
disksigp = buf + 0x1b8;
*disksigp = cpu_to_le32(priv->signature);
ret = write_mbr(blk, buf);
free(buf);
return ret;
}
/** Iterate over an extended partition.
* @param disk Disk that the partition is on.
* @param lba LBA of the extended partition.
* @param cb Callback function. */
static void handle_extended(disk_device_t *disk, uint32_t lba, partition_iterate_cb_t cb) {
mbr_t *ebr __cleanup_free;
size_t i = 4;
ebr = malloc(sizeof(*ebr));
for (uint32_t curr_ebr = lba, next_ebr = 0; curr_ebr; curr_ebr = next_ebr) {
mbr_partition_t *partition, *next;
if (!read_mbr(disk, ebr, curr_ebr)) {
dprintf("mbr: failed to read EBR at %" PRIu32 "\n", curr_ebr);
break;
} else if (ebr->signature != MBR_SIGNATURE) {
dprintf("mbr: warning: invalid EBR, corrupt partition table\n");
break;
}
/* First entry contains the logical partition, second entry refers to
* the next EBR, forming a linked list of EBRs. */
partition = &ebr->partitions[0];
next = &ebr->partitions[1];
/* Calculate the location of the next EBR. The start sector is relative
* to the start of the extended partition. Set to 0 if the second
* partition doesn't refer to another EBR entry, causes the loop to end. */
next->start_lba += lba;
next_ebr = (is_valid(disk, next) && is_extended(next) && next->start_lba > curr_ebr)
? next->start_lba
: 0;
/* Get the partition. Here the start sector is relative to the current
* EBR's location. */
partition->start_lba += curr_ebr;
if (!is_valid(disk, partition))
continue;
cb(disk, i++, partition->start_lba, partition->num_sectors);
}
}
/** Iterate over the partitions on a device.
* @param disk Disk to iterate over.
* @param cb Callback function.
* @return Whether the device contained an MBR partition table. */
static bool mbr_partition_iterate(disk_device_t *disk, partition_iterate_cb_t cb) {
mbr_t *mbr __cleanup_free;
bool seen_extended;
/* Read in the MBR, which is in the first block on the device. */
mbr = malloc(sizeof(*mbr));
if (!read_mbr(disk, mbr, 0) || mbr->signature != MBR_SIGNATURE)
return false;
/* Check if this is a GPT partition table (technically we should not get
* here if this is a GPT disk as the GPT code should be reached first). This
* is just a safeguard. */
if (mbr->partitions[0].type == MBR_PARTITION_TYPE_GPT)
return false;
/* Loop through all partitions in the table. */
seen_extended = false;
for (size_t i = 0; i < array_size(mbr->partitions); i++) {
mbr_partition_t *partition = &mbr->partitions[i];
if (!is_valid(disk, partition))
continue;
if (is_extended(partition)) {
if (seen_extended) {
dprintf("mbr: warning: ignoring multiple extended partitions\n");
continue;
}
handle_extended(disk, partition->start_lba, cb);
seen_extended = true;
} else {
cb(disk, i, partition->start_lba, partition->num_sectors);
}
}
return true;
}
unsigned char partition_type(dev_t dev)
{
struct buf *bp;
struct mbr *mbr;
unsigned char pt;
if (minor(dev)<1 || minor(dev)>4)
return 0;
if (rdopen(dev,0,S_SILENT) == 0) {
bp = read_mbr(major(dev));
rdclose(dev, 0, 0);
if (! bp) {
brelse(bp);
return 0;
}
mbr = (struct mbr *)bp->b_addr;
pt = mbr->partitions[minor(dev)-1].type;
brelse(bp);
return pt;
}
return 0;
}
UINTN gptsync(int optind, int argc, char **argv)
{
UINTN status = 0;
UINTN status_gpt, status_mbr;
BOOLEAN proceed = FALSE;
// get full information from disk
status_gpt = read_gpt();
status_mbr = read_mbr();
if (status_gpt != 0 || status_mbr != 0)
return (status_gpt || status_mbr);
// cross-check current situation
Print(L"\n");
status = check_gpt(); // check GPT for consistency
if (status != 0)
return status;
status = check_mbr(); // check MBR for consistency
if (status != 0)
return status;
status = analyze(optind, argc, argv); // analyze the situation & compose new MBR table
if (status != 0)
return status;
// offer user the choice what to do
status = input_boolean(STR("\nMay I update the MBR as printed above? [y/N] "), &proceed);
if (status != 0 || proceed != TRUE)
return status;
// adjust the MBR and write it back
status = write_mbr();
if (status != 0)
return status;
return status;
}
int main(){
int vol;
int nom;
int nbblocs;
int i;
unsigned int test_serial = 0xDEADBEEF;
init_drive();
read_mbr();
dump_vols();
printf("Saisir le numero du volume:\n");
scanf("%i", &vol);
while (mbr.mbr_vol[vol].vol_nblocs == 0){
printf("Veuillez saisir un numero de volume valide:\n");
scanf("%i", &vol);
}
printf("Saisir le nom:\n");
scanf("%i", &nom);
init_super(vol, nom, test_serial);
printf("Saisir le nombre de blocs:\n");
scanf("%i", &nbblocs);
for (i=0; i<nbblocs; i++){
new_bloc();
}
save_super();
if (nbblocs > mbr.mbr_vol[vol].vol_nblocs-1){
nbblocs = mbr.mbr_vol[vol].vol_nblocs-1;
}
printf("Superbloc rempli de %d blocs !\n", nbblocs);
printf("Taux d'occupation : %f/100\n", used_percents(vol));
return 0;
}
void kernel_main(uint32_t boot_dev, uint32_t arm_m_type, uint32_t atags)
{
atag_cmd_line = (void *)0;
_atags = atags;
_arm_m_type = arm_m_type;
UNUSED(boot_dev);
// First use the serial console
stdout_putc = uart_putc;
stderr_putc = uart_putc;
stream_putc = def_stream_putc;
// Dump ATAGS
parse_atags(atags, atag_cb);
int result = fb_init();
if(result == 0)
puts("Successfully set up frame buffer");
else
{
puts("Error setting up framebuffer:");
puthex(result);
}
// Switch to the framebuffer for output
stdout_putc = split_putc;
printf("Welcome to Rpi bootloader\n");
printf("ARM system type is %x\n", arm_m_type);
if(atag_cmd_line != (void *)0)
printf("Command line: %s\n", atag_cmd_line);
struct usb_hcd *usb_hcd;
dwc_usb_init(&usb_hcd, DWC_USB_BASE);
struct block_device *sd_dev;
if(sd_card_init(&sd_dev) == 0)
read_mbr(sd_dev, (void*)0, (void*)0);
// List devices
printf("MAIN: device list: ");
char **devs = vfs_get_device_list();
while(*devs)
printf("%s ", *devs++);
printf("\n");
// Look for a boot configuration file, starting with the default device,
// then iterating through all devices
FILE *f = (void*)0;
// Default device
char **fname = boot_cfg_names;
char *found_cfg;
while(*fname)
{
f = fopen(*fname, "r");
if(f)
{
found_cfg = *fname;
break;
}
fname++;
}
if(!f)
{
// Try other devices
char **dev = vfs_get_device_list();
while(*dev)
{
int dev_len = strlen(*dev);
fname = boot_cfg_names;
while(*fname)
{
int fname_len = strlen(*fname);
char *new_str = (char *)malloc(dev_len + fname_len + 3);
new_str[0] = 0;
strcat(new_str, "(");
strcat(new_str, *dev);
strcat(new_str, ")");
strcat(new_str, *fname);
f = fopen(new_str, "r");
if(f)
{
found_cfg = new_str;
break;
}
free(new_str);
fname++;
}
if(f)
break;
dev++;
}
}
if(!f)
{
printf("MAIN: No bootloader configuration file found\n");
}
else
{
printf("MAIN: Found bootloader configuration: %s\n", found_cfg);
char *buf = (char *)malloc(f->len + 1);
buf[f->len] = 0; // null terminate
fread(buf, 1, f->len, f);
fclose(f);
cfg_parse(buf);
}
}
/*
* Boot manager installation/configuration utility.
*/
int
main(int argc, char *argv[])
{
u_int8_t *mbr, *boot0;
int boot0_size, mbr_size;
const char *bpath, *fpath;
char *disk;
int B_flag, o_flag;
int d_arg, m_arg, s_arg, t_arg;
int o_and, o_or, o_e = -1;
int up, c;
bpath = "/boot/boot0";
fpath = NULL;
B_flag = v_flag = o_flag = 0;
d_arg = m_arg = s_arg = t_arg = -1;
o_and = 0xff;
o_or = 0;
while ((c = getopt(argc, argv, "Bvb:d:e:f:i:m:o:s:t:")) != -1)
switch (c) {
case 'B':
B_flag = 1;
break;
case 'v':
v_flag = 1;
break;
case 'b':
bpath = optarg;
break;
case 'd':
d_arg = argtoi(optarg, 0, 0xff, 'd');
break;
case 'e':
if (optarg[0] == '0' && optarg[1] == 'x')
sscanf(optarg, "0x%02x", &o_e);
else
o_e = optarg[0];
break;
case 'f':
fpath = optarg;
break;
case 'i':
if (sscanf(optarg, "%02x%02x-%02x%02x",
vol_id, vol_id+1, vol_id+2, vol_id+3) == 4)
vol_id[4] = 1;
else
errx(1, "bad argument %s", optarg);
break;
case 'm':
m_arg = argtoi(optarg, 0, 0xf, 'm');
break;
case 'o':
stropt(optarg, &o_and, &o_or);
o_flag = 1;
break;
case 's':
if (strcasecmp(optarg, "pxe") == 0)
s_arg = 6;
else
s_arg = argtoi(optarg, 1, 6, 's');
break;
case 't':
t_arg = argtoi(optarg, 1, 0xffff, 't');
break;
default:
usage();
}
argc -= optind;
argv += optind;
if (argc != 1)
usage();
disk = g_device_path(*argv);
if (disk == NULL)
errx(1, "Unable to get providername for %s\n", *argv);
up = B_flag || d_arg != -1 || m_arg != -1 || o_flag || s_arg != -1
|| t_arg != -1;
/* open the disk and read in the existing mbr. Either here or
* when reading the block from disk, we do check for the version
* and abort if a suitable block is not found.
*/
mbr_size = read_mbr(disk, &mbr, !B_flag);
/* save the existing MBR if we are asked to do so */
if (fpath)
write_mbr(fpath, O_CREAT | O_TRUNC, mbr, mbr_size);
/*
* If we are installing the boot loader, read it from disk and copy the
* slice table over from the existing MBR. If not, then point boot0
* back at the MBR we just read in. After this, boot0 is the data to
* write back to disk if we are going to do a write.
*/
if (B_flag) {
boot0_size = read_mbr(bpath, &boot0, 1);
memcpy(boot0 + OFF_PTBL, mbr + OFF_PTBL,
sizeof(struct dos_partition) * NDOSPART);
if (b0_ver == 2) /* volume serial number support */
memcpy(boot0 + OFF_SERIAL, mbr + OFF_SERIAL, 4);
} else {
boot0 = mbr;
boot0_size = mbr_size;
}
/* set the drive */
if (d_arg != -1)
boot0[OFF_DRIVE] = d_arg;
/* set various flags */
if (m_arg != -1) {
boot0[OFF_FLAGS] &= 0xf0;
boot0[OFF_FLAGS] |= m_arg;
}
if (o_flag) {
boot0[OFF_FLAGS] &= o_and;
boot0[OFF_FLAGS] |= o_or;
}
/* set the default boot selection */
if (s_arg != -1)
boot0[OFF_OPT] = s_arg - 1;
/* set the timeout */
if (t_arg != -1)
mk2(boot0 + OFF_TICKS, t_arg);
/* set the bell char */
if (o_e != -1 && set_bell(boot0, o_e, 0) != -1)
up = 1;
if (vol_id[4]) {
if (b0_ver != 2)
errx(1, "incompatible boot block, cannot set volume ID");
boot0[OFF_SERIAL] = vol_id[0];
boot0[OFF_SERIAL+1] = vol_id[1];
boot0[OFF_SERIAL+2] = vol_id[2];
boot0[OFF_SERIAL+3] = vol_id[3];
up = 1; /* force update */
}
/* write the MBR back to disk */
if (up)
write_mbr(disk, 0, boot0, boot0_size);
/* display the MBR */
if (v_flag)
display_mbr(boot0);
/* clean up */
if (mbr != boot0)
free(boot0);
free(mbr);
free(disk);
return 0;
}
int main(int argc, char *argv[]) {
int rc;
int cmd;
int done = 0;
// Check arguments
if (argc == 1) {
devname = "/dev/hd0";
} else if (argc == 2) {
devname = argv[1];
} else {
printf("usage: fdisk <device>\n");
return 1;
}
// Open device
hdev = open(devname, O_RDWR | O_BINARY);
if (hdev < 0) {
printf("%s: error %d opening device\n", devname, errno);
return 1;
}
// Get disk geometry
rc = ioctl(hdev, IOCTL_GETGEOMETRY, &geom , sizeof(struct geometry));
if (rc < 0) {
printf("%s: error %d determining disk geometry\n", devname, errno);
close(hdev);
return 1;
}
// Read master boot record
rc = read_mbr();
if (rc < 0 && errno != EINVAL) {
printf("%s: error %d reading master boot record\n", devname, errno);
close(hdev);
return 1;
}
// Ask to create new master boot record if the existing is invalid
if (rc < 0 && errno == EINVAL) {
printf("%s: invalid master boot record\n", devname);
if (ask("create new master boot record (y/n)? ", "yn") == 'y') {
memcpy(&mbr, bootrecord, sizeof(mbr));
}
}
// Read commands
printf("(a)dd (b)oot (c)ommit (d)elete (l)ist (m)br (h)elp e(x)it\n");
while (!done) {
cmd = ask("fdisk> ", "abcdlmhx?");
switch (cmd) {
case 'a':
add_partition();
break;
case 'b':
set_boot_part();
break;
case 'c':
commit_mbr();
break;
case 'd':
delete_partition();
break;
case 'l':
list_partitions();
break;
case 'm':
clear_mbr();
break;
case 'h':
case '?':
help();
break;
case 'x':
done = 1;
break;
}
}
// Close device
close(hdev);
return 0;
}
