void __init msm_camera_vreg_init(void)
{
int rc;
platform_add_devices(camera_devices,
ARRAY_SIZE(camera_devices));
if (!machine_is_msm7627a_qrd1())
register_i2c_devices();
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not get regulators: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not set voltages: %d\n", __func__, rc);
return;
}
if (machine_is_msm7627a_qrd1())
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_qrd,
ARRAY_SIZE(i2c_camera_devices_qrd));
else
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices,
ARRAY_SIZE(i2c_camera_devices));
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
msm_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
msm7x27a_otg_gadget();
/* LGE_CHANGE_: 2012/11/2 [email protected] U0 Flash Porting */
#ifndef CONFIG_MACH_LGE
msm7x27a_cfg_smsc911x();
#endif
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
lge_add_sound_devices();
#endif
/* LGE_CHANGE_S: 2012/11/2 [email protected] U0 Flash Porting */
msm7627a_camera_init();
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
lge_add_boot_mode_devices();
#endif
/* 2012-10-25 [email protected] Boot Mode Check [END] */
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
lge_add_panic_handler_devices();
#endif
lge_add_pm_devices();
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
msm_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
msm7x27a_otg_gadget();
msm7x27a_cfg_smsc911x();
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
register_i2c_devices();
msm7627a_bt_power_init();
msm7627a_camera_init();
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
}
void __init msm8974_init(void)
{
struct of_dev_auxdata *adata = msm8974_auxdata_lookup;
#ifdef CONFIG_SEC_DEBUG
sec_debug_init();
#endif
#ifdef CONFIG_PROC_AVC
sec_avc_log_init();
#endif
if (socinfo_init() < 0)
pr_err("%s: socinfo_init() failed\n", __func__);
msm_8974_init_gpiomux();
regulator_has_full_constraints();
board_dt_populate(adata);
samsung_sys_class_init();
#ifdef CONFIG_SEC_FACTORY
samsung_proc_ddrsize_init();
#endif
msm8974_add_drivers();
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
register_i2c_devices();
#ifdef CONFIG_SENSORS_SSP
sensor_hub_init();
#endif
#if defined(CONFIG_KEYBOARD_MATRIX) && defined(CONFIG_MACH_MONTBLANC)
platform_device_register(&folder_keypad_device);
#ifdef CONFIG_INPUT_FLIP
flip_init_hw();
platform_device_register(&sec_flip_device);
#endif
#endif
#if defined(CONFIG_BATTERY_SAMSUNG)
samsung_init_battery();
#endif
#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
msm8974_bt_init();
#endif
#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
brcm_wlan_init();
#endif
#if defined(CONFIG_SAMSUNG_LPM_MODE)
if(poweroff_charging)
{
modem_power_off();
}
#endif
#if defined (CONFIG_MOTOR_DRV_ISA1400)
vienna_motor_init();
#endif
}
void __init msm7627a_camera_init(void)
{
int rc;
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1()) {
qrd1_camera_gpio_cfg();
platform_add_devices(camera_devices_qrd,
ARRAY_SIZE(camera_devices_qrd));
} else
platform_add_devices(camera_devices_msm,
ARRAY_SIZE(camera_devices_msm));
#endif
if (!machine_is_msm7627a_qrd1())
register_i2c_devices();
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not get regulators: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not set voltages: %d\n", __func__, rc);
return;
}
#if defined(CONFIG_MSM_CAMERA_V4L2)
msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1())
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_qrd,
ARRAY_SIZE(i2c_camera_devices_qrd));
else
#endif
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices,
ARRAY_SIZE(i2c_camera_devices));
}
void __init lge_add_i2c_devices(void)
{
register_i2c_devices();
lge_add_gpio_i2c_devices();
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
/* Common functions for SURF/FFA/RUMI3 */
msm_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_cfg_uart2dm_serial();
#ifdef CONFIG_SERIAL_MSM_HS
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency =
msm7x27a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
msm_device_gadget_peripheral.dev.platform_data =
&msm_gadget_pdata;
msm7x27a_cfg_smsc911x();
platform_add_devices(msm_footswitch_devices,
msm_num_footswitch_devices);
platform_add_devices(surf_ffa_devices,
ARRAY_SIZE(surf_ffa_devices));
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
#ifdef CONFIG_MMC_MSM
msm7627a_init_mmc();
#endif
msm_fb_add_devices();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7x2x_init_host();
#endif
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
atmel_ts_pdata.min_x = 0;
atmel_ts_pdata.max_x = 480;
atmel_ts_pdata.min_y = 0;
atmel_ts_pdata.max_y = 320;
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
atmel_ts_i2c_info,
ARRAY_SIZE(atmel_ts_i2c_info));
#if defined(CONFIG_MSM_CAMERA)
msm7627a_camera_init();
#endif
platform_device_register(&kp_pdev);
platform_device_register(&hs_pdev);
/* configure it as a pdm function*/
if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_8MA), GPIO_CFG_ENABLE))
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, LED_GPIO_PDM);
else
platform_device_register(&led_pdev);
#ifdef CONFIG_MSM_RPC_VIBRATOR
if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
msm_init_pmic_vibrator();
#endif
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
}
void __init msm7627a_camera_init(void)
{
int rc;
/* <DTS2012041003722 sibingsong 20120410 begin */
/*< DTS2012021000399 yuguangcai 20120211 begin */
#ifdef CONFIG_HUAWEI_CAMERA
/*before camera probe, config the camera pwd gpio*/
camera_sensor_pwd_config();
#endif
/* DTS2012021000399 yuguangcai 20120211 end > */
/* DTS2012041003722 sibingsong 20120410 end> */
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1()) {
qrd1_camera_gpio_cfg();
platform_add_devices(camera_devices_qrd,
ARRAY_SIZE(camera_devices_qrd));
} else
platform_add_devices(camera_devices_msm,
ARRAY_SIZE(camera_devices_msm));
#endif
if (!machine_is_msm7627a_qrd1())
register_i2c_devices();
/* < DTS2012050205820 zhouqiwei 20120502 begin */
if (WIFI_QUALCOMM == get_hw_wifi_device_type())
{
if (HW_DS != get_hw_ds_type())
{
rc = regulator_bulk_get(NULL,
ARRAY_SIZE(regs_camera_WIFI_QUALCOMM), regs_camera_WIFI_QUALCOMM);
if (rc) {
pr_err("%s: could not get regs_camera_WIFI_QUALCOMM: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera_WIFI_QUALCOMM), regs_camera_WIFI_QUALCOMM);
if (rc) {
pr_err("%s: could not set regs_camera_WIFI_QUALCOMM: %d\n", __func__, rc);
return;
}
}
else
{
rc = regulator_bulk_get(NULL,
ARRAY_SIZE(regs_camera_HW_DS), regs_camera_HW_DS);
if (rc) {
pr_err("%s: could not get regs_camera_HW_DSs: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera_HW_DS), regs_camera_HW_DS);
if (rc) {
pr_err("%s: could not set regs_camera_HW_DS: %d\n", __func__, rc);
return;
}
}
}
else
{
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not get regulators: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not set voltages: %d\n", __func__, rc);
return;
}
}
/* DTS2012050205820 zhouqiwei 20120502 end > */
#if defined(CONFIG_MSM_CAMERA_V4L2)
msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1())
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_qrd,
ARRAY_SIZE(i2c_camera_devices_qrd));
else
#endif
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices,
ARRAY_SIZE(i2c_camera_devices));
}
void __init msm7627a_camera_init(void)
{
#ifndef CONFIG_MSM_CAMERA_V4L2
int rc;
#endif
pr_debug("msm7627a_camera_init Entered\n");
if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
ov7692_cam_req_gpio[0].gpio =
GPIO_SKU7_CAM_VGA_SHDN;
ov7692_cam_gpio_set_tbl[0].gpio = GPIO_SKU7_CAM_VGA_SHDN;
ov7692_cam_gpio_set_tbl[1].gpio = GPIO_SKU7_CAM_VGA_SHDN;
msm_camera_sensor_ov5647_data.sensor_pwd =
GPIO_SKU7_CAM_5MP_SHDN_N;
msm_camera_sensor_ov5647_data.sensor_reset =
GPIO_SKU7_CAM_5MP_CAMIF_RESET;
}
/* LCD and camera power (VREG & LDO) init */
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
#ifndef CONFIG_MSM_CAMERA_V4L2
lcd_camera_power_init();
#endif
evb_camera_gpio_cfg();
}
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1()) {
qrd1_camera_gpio_cfg();
platform_add_devices(camera_devices_qrd,
ARRAY_SIZE(camera_devices_qrd));
} else if (machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
platform_add_devices(camera_devices_evb,
ARRAY_SIZE(camera_devices_evb));
} else if (machine_is_msm7627a_qrd3())
return;
else
platform_add_devices(camera_devices_msm,
ARRAY_SIZE(camera_devices_msm));
#endif
if (!machine_is_msm7627a_qrd1() || !machine_is_msm7627a_evb()
|| !machine_is_msm8625_evb()
|| !machine_is_msm8625_evt()
|| !machine_is_msm7627a_qrd3()
|| !machine_is_msm8625_qrd7())
register_i2c_devices();
#ifndef CONFIG_MSM_CAMERA_V4L2
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not get regulators: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not set voltages: %d\n", __func__, rc);
return;
}
#endif
#if defined(CONFIG_MSM_CAMERA_V4L2)
msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1()) {
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_qrd,
ARRAY_SIZE(i2c_camera_devices_qrd));
} else if (machine_is_msm7627a_evb()
|| machine_is_msm8625_evb()
|| machine_is_msm8625_evt()
|| machine_is_msm7627a_qrd3()
|| machine_is_msm8625_qrd7()) {
pr_debug("machine_is_msm7627a_evb i2c_register_board_info\n");
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_evb,
ARRAY_SIZE(i2c_camera_devices_evb));
} else
#endif
pr_debug("i2c_register_board_info\n");
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices,
ARRAY_SIZE(i2c_camera_devices));
}
static int vpfe_register_entities(struct vpfe_device *vpfe_dev)
{
int ret, i;
unsigned int flags = 0;
/* register i2c devices first */
ret = register_i2c_devices(vpfe_dev);
if (ret)
return ret;
/* register rest of the sub-devs */
ret = vpfe_ccdc_register_entities(&vpfe_dev->vpfe_ccdc,
&vpfe_dev->v4l2_dev);
if (ret)
return ret;
ret = vpfe_previewer_register_entities(&vpfe_dev->vpfe_previewer,
&vpfe_dev->v4l2_dev);
if (ret)
goto out_ccdc_register;
ret = vpfe_resizer_register_entities(&vpfe_dev->vpfe_resizer,
&vpfe_dev->v4l2_dev);
if (ret)
goto out_previewer_register;
ret = vpfe_aew_register_entities(&vpfe_dev->vpfe_aew,
&vpfe_dev->v4l2_dev);
if (ret)
goto out_resizer_register;
ret = vpfe_af_register_entities(&vpfe_dev->vpfe_af,
&vpfe_dev->v4l2_dev);
if (ret)
goto out_aew_register;
/* create links now, starting with external(i2c) entities */
for (i = 0; i < vpfe_dev->num_subdevs; i++) {
/* if entity has no pads (ex: amplifier),
cant establish link */
if (vpfe_dev->sd[i]->entity.num_pads) {
ret = media_entity_create_link(&vpfe_dev->sd[i]->entity,
0, &vpfe_dev->vpfe_ccdc.subdev.entity,
0, flags);
if (ret < 0)
goto out_resizer_register;
}
}
ret = media_entity_create_link(&vpfe_dev->vpfe_ccdc.subdev.entity,
1, &vpfe_dev->vpfe_aew.subdev.entity,
0, flags);
if (ret < 0)
goto out_resizer_register;
ret = media_entity_create_link(&vpfe_dev->vpfe_ccdc.subdev.entity,
1, &vpfe_dev->vpfe_af.subdev.entity,
0, flags);
if (ret < 0)
goto out_resizer_register;
ret = media_entity_create_link(&vpfe_dev->vpfe_ccdc.subdev.entity,
1,
&vpfe_dev->vpfe_previewer.subdev.entity,
0, flags);
if (ret < 0)
goto out_resizer_register;
ret = media_entity_create_link(&vpfe_dev->vpfe_previewer.subdev.entity,
1, &vpfe_dev->vpfe_resizer.subdev.entity,
0, flags);
if (ret < 0)
goto out_resizer_register;
return 0;
out_aew_register:
vpfe_aew_unregister_entities(&vpfe_dev->vpfe_aew);
out_resizer_register:
vpfe_resizer_unregister_entities(&vpfe_dev->vpfe_resizer);
out_previewer_register:
vpfe_previewer_unregister_entities(&vpfe_dev->vpfe_previewer);
out_ccdc_register:
vpfe_ccdc_unregister_entities(&vpfe_dev->vpfe_ccdc);
return ret;
}
void __init msm7627a_camera_init(void)
{
#ifndef CONFIG_MSM_CAMERA_V4L2
int rc;
#endif
pr_debug("msm7627a_camera_init Entered\n");
/* LCD and camera power (VREG & LDO) init */
if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()) {
lcd_camera_power_init();
evb_camera_gpio_cfg();
}
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1()) {
qrd1_camera_gpio_cfg();
platform_add_devices(camera_devices_qrd,
ARRAY_SIZE(camera_devices_qrd));
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()) {
platform_add_devices(camera_devices_evb,
ARRAY_SIZE(camera_devices_evb));
} else if (machine_is_msm7627a_qrd3())
return;
else
platform_add_devices(camera_devices_msm,
ARRAY_SIZE(camera_devices_msm));
#endif
if (!machine_is_msm7627a_qrd1() || !machine_is_msm7627a_evb()
|| !machine_is_msm8625_evb())
register_i2c_devices();
#ifndef CONFIG_MSM_CAMERA_V4L2
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not get regulators: %d\n", __func__, rc);
return;
}
rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
if (rc) {
pr_err("%s: could not set voltages: %d\n", __func__, rc);
return;
}
#endif
#if defined(CONFIG_MSM_CAMERA_V4L2)
msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
if (machine_is_msm7627a_qrd1()) {
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_qrd,
ARRAY_SIZE(i2c_camera_devices_qrd));
} else if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()) {
pr_debug("machine_is_msm7627a_evb i2c_register_board_info\n");
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices_evb,
ARRAY_SIZE(i2c_camera_devices_evb));
} else
#endif
pr_debug("i2c_register_board_info\n");
i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
i2c_camera_devices,
ARRAY_SIZE(i2c_camera_devices));
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
msm_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
#ifdef CONFIG_HUAWEI_KERNEL
import_kernel_cmdline();
#endif
msm7x27a_otg_gadget();
#ifndef CONFIG_HUAWEI_CAMERA
msm7x27a_cfg_smsc911x();
#endif
#if (defined(CONFIG_HUAWEI_BT_BCM43XX) && defined(CONFIG_HUAWEI_KERNEL))
/*before bt probe, config the bt_wake_msm gpio*/
bt_wake_msm_config();
#endif
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
register_i2c_devices();
//#if (defined(HUAWEI_BT_BLUEZ_VER30) || (!defined(CONFIG_HUAWEI_KERNEL)))
//msm7627a_bt_power_init() will check QC or BCM bt chip powers inner.
msm7627a_bt_power_init();
//#endif
msm7627a_camera_init();
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
#ifdef CONFIG_HUAWEI_FEATURE_OEMINFO
rmt_oeminfo_add_device();
#endif
#ifdef CONFIG_HUAWEI_KERNEL
virtualkeys_init();
#endif
#ifdef CONFIG_HUAWEI_KERNEL
hw_extern_sdcard_add_device();
#endif
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
#ifdef CONFIG_HUAWEI_MTK6252_MODEM
{
unsigned smem_size;
boot_reason = *(unsigned int *)
(smem_get_entry(SMEM_POWER_ON_STATUS_INFO, &smem_size));
printk(KERN_NOTICE "Boot Reason = 0x%02x\n", boot_reason);
mtk6252_dev_init();
}
#endif
}
