int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
struct data_ring *ring;
u16 frame_control;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
ieee80211_stop_queues(hw);
return 0;
}
/*
* Determine which ring to put packet on.
*/
ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
if (unlikely(!ring)) {
ERROR(rt2x00dev,
"Attempt to send packet over invalid queue %d.\n"
"Please file bug report to %s.\n",
control->queue, DRV_PROJECT);
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
/*
* If CTS/RTS is required. and this frame is not CTS or RTS,
* create and queue that frame first. But make sure we have
* at least enough entries available to send this CTS/RTS
* frame as well as the data frame.
*/
frame_control = le16_to_cpu(ieee80211hdr->frame_control);
if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) &&
(control->flags & (IEEE80211_TXCTL_USE_RTS_CTS |
IEEE80211_TXCTL_USE_CTS_PROTECT))) {
if (rt2x00_ring_free(ring) <= 1)
return NETDEV_TX_BUSY;
if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control))
return NETDEV_TX_BUSY;
}
if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control))
return NETDEV_TX_BUSY;
if (rt2x00dev->ops->lib->kick_tx_queue)
rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
return NETDEV_TX_OK;
}
void rt2x00mac_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
enum data_queue_qid qid = skb_get_queue_mapping(skb);
struct data_queue *queue = NULL;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
goto exit_free_skb;
/*
* Use the ATIM queue if appropriate and present.
*/
if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM &&
test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags))
qid = QID_ATIM;
queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
if (unlikely(!queue)) {
rt2x00_err(rt2x00dev,
"Attempt to send packet over invalid queue %d\n"
"Please file bug report to %s\n", qid, DRV_PROJECT);
goto exit_free_skb;
}
/*
* If CTS/RTS is required. create and queue that frame first.
* Make sure we have at least enough entries available to send
* this CTS/RTS frame as well as the data frame.
* Note that when the driver has set the set_rts_threshold()
* callback function it doesn't need software generation of
* either RTS or CTS-to-self frame and handles everything
* inside the hardware.
*/
if (!rt2x00dev->ops->hw->set_rts_threshold &&
(tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
IEEE80211_TX_RC_USE_CTS_PROTECT))) {
if (rt2x00queue_available(queue) <= 1)
goto exit_fail;
if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
goto exit_fail;
}
if (unlikely(rt2x00queue_write_tx_frame(queue, skb, control->sta, false)))
goto exit_fail;
/*
* Pausing queue has to be serialized with rt2x00lib_txdone(). Note
* we should not use spin_lock_bh variant as bottom halve was already
* disabled before ieee80211_xmit() call.
*/
spin_lock(&queue->tx_lock);
if (rt2x00queue_threshold(queue))
rt2x00queue_pause_queue(queue);
spin_unlock(&queue->tx_lock);
return;
exit_fail:
spin_lock(&queue->tx_lock);
rt2x00queue_pause_queue(queue);
spin_unlock(&queue->tx_lock);
exit_free_skb:
ieee80211_free_txskb(hw, skb);
}
int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
enum data_queue_qid qid = skb_get_queue_mapping(skb);
struct data_queue *queue;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
goto exit_fail;
/*
* Determine which queue to put packet on.
*/
if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM &&
test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
queue = rt2x00queue_get_queue(rt2x00dev, QID_ATIM);
else
queue = rt2x00queue_get_queue(rt2x00dev, qid);
if (unlikely(!queue)) {
ERROR(rt2x00dev,
"Attempt to send packet over invalid queue %d.\n"
"Please file bug report to %s.\n", qid, DRV_PROJECT);
goto exit_fail;
}
/*
* If CTS/RTS is required. create and queue that frame first.
* Make sure we have at least enough entries available to send
* this CTS/RTS frame as well as the data frame.
* Note that when the driver has set the set_rts_threshold()
* callback function it doesn't need software generation of
* either RTS or CTS-to-self frame and handles everything
* inside the hardware.
*/
if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
IEEE80211_TX_RC_USE_CTS_PROTECT)) &&
!rt2x00dev->ops->hw->set_rts_threshold) {
if (rt2x00queue_available(queue) <= 1)
goto exit_fail;
if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
goto exit_fail;
}
if (rt2x00queue_write_tx_frame(queue, skb, false))
goto exit_fail;
if (rt2x00queue_threshold(queue))
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_OK;
exit_fail:
ieee80211_stop_queue(rt2x00dev->hw, qid);
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
