/**
* This function will handle system sof event.
*
* @param device the usb device object.
*
* @return RT_EOK on successful.
*/
static rt_err_t _class_sof_handler(udevice_t device, uclass_t cls)
{
rt_uint32_t level;
rt_size_t size;
static rt_uint32_t frame_count = 0;
cdc_eps_t eps;
if(vcom_connected != RT_TRUE) return -RT_ERROR;
eps = (cdc_eps_t)cls->eps;
if (frame_count ++ == 5)
{
rt_size_t mps = eps->ep_in->ep_desc->wMaxPacketSize;
/* reset the frame counter */
frame_count = 0;
size = RT_RINGBUFFER_SIZE(&tx_ringbuffer);
if(size == 0) return -RT_EFULL;
size = size > mps ? mps : size;
level = rt_hw_interrupt_disable();
rt_ringbuffer_get(&tx_ringbuffer, eps->ep_in->buffer, size);
rt_hw_interrupt_enable(level);
/* send data to host */
dcd_ep_write(device->dcd, eps->ep_in, eps->ep_in->buffer, size);
}
return RT_EOK;
}
/*******************************************************************************
* Function Name : Handle_USBAsynchXfer.
* Description : send data to USB.
* Input : None.
* Return : none.
*******************************************************************************/
void Handle_USBAsynchXfer (void)
{
rt_uint32_t level;
rt_uint32_t remain;
if(USB_Tx_State != 1)
{
level = rt_hw_interrupt_disable();
remain = RT_RINGBUFFER_SIZE(&tx_ringbuffer);
if(remain == 0)
{
USB_Tx_State = 0;
rt_hw_interrupt_enable(level);
return;
}
if (remain > VIRTUAL_COM_PORT_DATA_SIZE)
{
remain = VIRTUAL_COM_PORT_DATA_SIZE;
}
rt_ringbuffer_get(&tx_ringbuffer, tx_buf, remain);
rt_hw_interrupt_enable(level);
USB_Tx_State = 1;
UserToPMABufferCopy(tx_buf, ENDP1_TXADDR, remain);
SetEPTxCount(ENDP1, remain);
SetEPTxValid(ENDP1);
}
}
static rt_size_t wrtnode2r_spi_bridge_read(rt_device_t dev,
rt_off_t pos,
void* buffer,
rt_size_t size)
{
return rt_ringbuffer_get(&spi_bridge.read_buf, buffer, size);
}
/***********************************************************
* Function:gps_read
* Description:数据模式下读取数据
* Input:
* Input:
* Output:
* Return:
* Others:
***********************************************************/
static rt_size_t dev_vuart_read( rt_device_t dev, rt_off_t pos, void* buff, rt_size_t count )
{
if(count>1)
return rt_ringbuffer_get(&rb_vuart,buff,count);
else
return rt_ringbuffer_getchar(&rb_vuart,buff);
}
static rt_size_t telnet_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_size_t result;
/* read from rx ring buffer */
rt_mutex_take(telnet->rx_ringbuffer_lock, RT_WAITING_FOREVER);
result = rt_ringbuffer_get(&(telnet->rx_ringbuffer), buffer, size);
rt_mutex_release(telnet->rx_ringbuffer_lock);
return result;
}
/*******************************************************************************
* Function Name : EP1_IN_Callback
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void EP1_IN_Callback (void)
{
rt_uint32_t level;
rt_uint32_t remain;
if (USB_Tx_State == 1)
{
level = rt_hw_interrupt_disable();
remain = RT_RINGBUFFER_SIZE(&tx_ringbuffer);
if (remain == 0)
{
USB_Tx_State = 0;
rt_hw_interrupt_enable(level);
return;
}
else
{
if (remain > VIRTUAL_COM_PORT_DATA_SIZE)
{
remain = VIRTUAL_COM_PORT_DATA_SIZE;
}
/* although vcom_in_sending is set in SOF handler in the very
* beginning, we have to guarantee the state is right when start
* sending. There is at least one extreme case where we have finished the
* last IN transaction but the vcom_in_sending is RT_FALSE.
*
* Ok, what the extreme case is: pour data into vcom in loop. Open
* terminal on the PC, you will see the data. Then close it. So the
* data will be sent to the PC in the back. When the buffer of the PC
* driver is full. It will not send IN packet to the board and you will
* have no chance to clear vcom_in_sending in this function. The data
* will fill into the ringbuffer until it is full, and we will reset
* the state machine and clear vcom_in_sending. When you open the
* terminal on the PC again. The IN packet will appear on the line and
* we will, eventually, reach here with vcom_in_sending is clear.
*/
vcom_in_sending = RT_TRUE;
rt_ringbuffer_get(&tx_ringbuffer, tx_buf, remain);
rt_hw_interrupt_enable(level);
/* send data to host */
UserToPMABufferCopy(tx_buf, ENDP1_TXADDR, remain);
SetEPTxCount(ENDP1, remain);
SetEPTxValid(ENDP1);
//return RT_EOK;
}
}
}
/**
* This function will handle cdc bulk in endpoint request.
*
* @param device the usb device object.
* @param size request size.
*
* @return RT_EOK.
*/
static rt_err_t _ep_in_handler(udevice_t device, rt_size_t size)
{
rt_uint32_t level;
rt_size_t length;
rt_size_t mps = ep_in->ep_desc->wMaxPacketSize;
size = RT_RINGBUFFER_SIZE(&tx_ringbuffer);
if(size == 0) return RT_EOK;
length = size > mps ? mps : size;
level = rt_hw_interrupt_disable();
rt_ringbuffer_get(&tx_ringbuffer, ep_in->buffer, length);
rt_hw_interrupt_enable(level);
/* send data to host */
dcd_ep_write(device->dcd, ep_in, ep_in->buffer, length);
return RT_EOK;
}
/* process tx data */
static void send_to_client(struct telnet_session* telnet)
{
rt_size_t length;
rt_uint8_t tx_buffer[32];
while (1)
{
rt_memset(tx_buffer, 0, sizeof(tx_buffer));
rt_mutex_take(telnet->tx_ringbuffer_lock, RT_WAITING_FOREVER);
/* get buffer from ringbuffer */
length = rt_ringbuffer_get(&(telnet->tx_ringbuffer), tx_buffer, sizeof(tx_buffer));
rt_mutex_release(telnet->tx_ringbuffer_lock);
/* do a tx procedure */
if (length > 0)
{
send(telnet->client_fd, tx_buffer, length, 0);
}
else break;
}
}
