static int rtl28xxu_init(struct dvb_usb_device *d)
{
int ret;
u8 val;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* init USB endpoints */
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
if (ret)
goto err;
/* enable DMA and Full Packet Mode*/
val |= 0x09;
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
if (ret)
goto err;
/* set EPA maximum packet size to 0x0200 */
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
if (ret)
goto err;
/* change EPA FIFO length */
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
if (ret)
goto err;
return ret;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
int ret;
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff) {
/* GPIO3=1, GPIO4=0 */
ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18);
if (ret)
goto err;
/* suspend? */
ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10);
if (ret)
goto err;
/* enable PLL */
ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80);
if (ret)
goto err;
/* disable reset */
ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20);
if (ret)
goto err;
/* streaming EP: clear stall & reset */
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2);
if (ret)
goto err;
ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
if (ret)
goto err;
} else {
/* GPIO4=1 */
ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10);
if (ret)
goto err;
/* disable PLL */
ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80);
if (ret)
goto err;
/* streaming EP: set stall & reset */
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2);
if (ret)
goto err;
}
return ret;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
{
int ret;
u8 buf[2];
deb_info("%s: onoff=%d\n", __func__, onoff);
if (onoff) {
buf[0] = 0x00;
buf[1] = 0x00;
} else {
buf[0] = 0x10; /* stall EPA */
buf[1] = 0x02; /* reset EPA */
}
ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
if (ret)
goto err;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
{
int ret;
u8 buf[2], gpio;
deb_info("%s: onoff=%d\n", __func__, onoff);
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio);
if (ret)
goto err;
if (onoff) {
buf[0] = 0x00;
buf[1] = 0x00;
gpio |= 0x04; /* LED on */
} else {
buf[0] = 0x10; /* stall EPA */
buf[1] = 0x02; /* reset EPA */
gpio &= (~0x04); /* LED off */
}
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
if (ret)
goto err;
ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
if (ret)
goto err;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
int ret;
u8 gpio, sys0, epa_ctl[2];
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
/* demod adc */
ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
if (ret)
goto err;
/* tuner power, read GPIOs */
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
if (ret)
goto err;
dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
sys0, gpio);
if (onoff) {
gpio |= 0x01; /* GPIO0 = 1 */
gpio &= (~0x10); /* GPIO4 = 0 */
gpio |= 0x04; /* GPIO2 = 1, LED on */
sys0 = sys0 & 0x0f;
sys0 |= 0xe0;
epa_ctl[0] = 0x00; /* clear stall */
epa_ctl[1] = 0x00; /* clear reset */
} else {
gpio &= (~0x01); /* GPIO0 = 0 */
gpio |= 0x10; /* GPIO4 = 1 */
gpio &= (~0x04); /* GPIO2 = 1, LED off */
sys0 = sys0 & (~0xc0);
epa_ctl[0] = 0x10; /* set stall */
epa_ctl[1] = 0x02; /* set reset */
}
dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
sys0, gpio);
/* demod adc */
ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
if (ret)
goto err;
/* tuner power, write GPIOs */
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
if (ret)
goto err;
/* streaming EP: stall & reset */
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2);
if (ret)
goto err;
if (onoff)
usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
return ret;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
{
return rtl28xx_wr_regs(d, reg, &val, 1);
}
static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
int ret;
u8 val;
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff) {
/* set output values */
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
if (ret)
goto err;
val |= 0x08;
val &= 0xef;
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
if (ret)
goto err;
/* demod_ctl_1 */
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
if (ret)
goto err;
val &= 0xef;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
if (ret)
goto err;
/* demod control */
/* PLL enable */
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
if (ret)
goto err;
/* bit 7 to 1 */
val |= 0x80;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
if (ret)
goto err;
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
if (ret)
goto err;
val |= 0x20;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
if (ret)
goto err;
mdelay(5);
/*enable ADC_Q and ADC_I */
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
if (ret)
goto err;
val |= 0x48;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
if (ret)
goto err;
/* streaming EP: clear stall & reset */
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2);
if (ret)
goto err;
ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
if (ret)
goto err;
} else {
/* demod_ctl_1 */
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
if (ret)
goto err;
val |= 0x0c;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
if (ret)
goto err;
/* set output values */
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
if (ret)
goto err;
val |= 0x10;
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
if (ret)
goto err;
/* demod control */
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
if (ret)
goto err;
val &= 0x37;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
if (ret)
goto err;
/* streaming EP: set stall & reset */
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2);
if (ret)
goto err;
}
return ret;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
struct dvb_frontend *fe = NULL;
struct i2c_board_info info;
struct i2c_client *client;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
memset(&info, 0, sizeof(struct i2c_board_info));
switch (priv->tuner) {
case TUNER_RTL2832_FC0012:
fe = dvb_attach(fc0012_attach, adap->fe[0],
&d->i2c_adap, &rtl2832u_fc0012_config);
/* since fc0012 includs reading the signal strength delegate
* that to the tuner driver */
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
/* attach SDR */
dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
&rtl28xxu_rtl2832_fc0012_config, NULL);
break;
case TUNER_RTL2832_FC0013:
fe = dvb_attach(fc0013_attach, adap->fe[0],
&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
/* fc0013 also supports signal strength reading */
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
/* attach SDR */
dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
&rtl28xxu_rtl2832_fc0013_config, NULL);
break;
case TUNER_RTL2832_E4000: {
struct v4l2_subdev *sd;
struct i2c_adapter *i2c_adap_internal =
rtl2832_get_private_i2c_adapter(adap->fe[0]);
struct e4000_config e4000_config = {
.fe = adap->fe[0],
.clock = 28800000,
};
strlcpy(info.type, "e4000", I2C_NAME_SIZE);
info.addr = 0x64;
info.platform_data = &e4000_config;
request_module(info.type);
client = i2c_new_device(priv->demod_i2c_adapter, &info);
if (client == NULL || client->dev.driver == NULL)
break;
if (!try_module_get(client->dev.driver->owner)) {
i2c_unregister_device(client);
break;
}
priv->i2c_client_tuner = client;
sd = i2c_get_clientdata(client);
i2c_set_adapdata(i2c_adap_internal, d);
/* attach SDR */
dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0],
i2c_adap_internal,
&rtl28xxu_rtl2832_e4000_config, sd);
}
break;
case TUNER_RTL2832_FC2580:
fe = dvb_attach(fc2580_attach, adap->fe[0], &d->i2c_adap,
&rtl2832u_fc2580_config);
break;
case TUNER_RTL2832_TUA9001:
/* enable GPIO1 and GPIO4 as output */
ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12);
if (ret)
goto err;
ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12);
if (ret)
goto err;
fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap,
&rtl2832u_tua9001_config);
break;
case TUNER_RTL2832_R820T:
fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap,
&rtl2832u_r820t_config);
/* Use tuner to get the signal strength */
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
/* attach SDR */
dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
&rtl28xxu_rtl2832_r820t_config, NULL);
break;
case TUNER_RTL2832_R828D:
fe = dvb_attach(r820t_attach, adap->fe[0],
priv->demod_i2c_adapter,
&rtl2832u_r828d_config);
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
if (adap->fe[1]) {
fe = dvb_attach(r820t_attach, adap->fe[1],
priv->demod_i2c_adapter,
&rtl2832u_r828d_config);
adap->fe[1]->ops.read_signal_strength =
adap->fe[1]->ops.tuner_ops.get_rf_strength;
}
/* attach SDR */
dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
&rtl28xxu_rtl2832_r820t_config, NULL);
break;
default:
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
priv->tuner);
}
if (fe == NULL && priv->i2c_client_tuner == NULL) {
ret = -ENODEV;
goto err;
}
return 0;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_tuner_detach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
struct i2c_client *client;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* remove I2C tuner */
client = priv->i2c_client_tuner;
if (client) {
module_put(client->dev.driver->owner);
i2c_unregister_device(client);
}
return 0;
}
static int rtl28xxu_init(struct dvb_usb_device *d)
{
int ret;
u8 val;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* init USB endpoints */
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
if (ret)
goto err;
/* enable DMA and Full Packet Mode*/
val |= 0x09;
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
if (ret)
goto err;
/* set EPA maximum packet size to 0x0200 */
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
if (ret)
goto err;
/* change EPA FIFO length */
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
if (ret)
goto err;
return ret;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl28xxu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret, i;
u8 val;
int properties_count = ARRAY_SIZE(rtl28xxu_properties);
struct dvb_usb_device *d;
struct usb_device *udev;
bool found;
deb_info("%s: interface=%d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return 0;
/* Dynamic USB ID support. Replaces first device ID with current one .*/
udev = interface_to_usbdev(intf);
for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) {
if (rtl28xxu_table[i].idVendor ==
le16_to_cpu(udev->descriptor.idVendor) &&
rtl28xxu_table[i].idProduct ==
le16_to_cpu(udev->descriptor.idProduct)) {
found = true;
break;
}
}
if (!found) {
deb_info("%s: using dynamic ID %04x:%04x\n", __func__,
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor =
le16_to_cpu(udev->descriptor.idVendor);
rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct =
le16_to_cpu(udev->descriptor.idProduct);
}
for (i = 0; i < properties_count; i++) {
ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i],
THIS_MODULE, &d, adapter_nr);
if (ret == 0 || ret != -ENODEV)
break;
}
if (ret)
goto err;
/* init USB endpoints */
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
if (ret)
goto err;
/* enable DMA and Full Packet Mode*/
val |= 0x09;
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
if (ret)
goto err;
/* set EPA maximum packet size to 0x0200 */
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
if (ret)
goto err;
/* change EPA FIFO length */
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
if (ret)
goto err;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
return ret;
}
