static void _rtl92s_dm_txpowertracking_callback_thermalmeter(
struct ieee80211_hw *hw )
{
struct rtl_priv *rtlpriv = rtl_priv( hw );
struct rtl_efuse *rtlefuse = rtl_efuse( rtl_priv( hw ) );
u8 thermalvalue = 0;
u32 fw_cmd = 0;
rtlpriv->dm.txpower_trackinginit = true;
thermalvalue = ( u8 )rtl_get_rfreg( hw, RF90_PATH_A, RF_T_METER, 0x1f );
RT_TRACE( rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
"Readback Thermal Meter = 0x%x pre thermal meter 0x%x eeprom_thermal meter 0x%x\n",
thermalvalue,
rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter );
if ( thermalvalue ) {
rtlpriv->dm.thermalvalue = thermalvalue;
if ( hal_get_firmwareversion( rtlpriv ) >= 0x35 ) {
rtl92s_phy_set_fw_cmd( hw, FW_CMD_TXPWR_TRACK_THERMAL );
} else {
fw_cmd = ( FW_TXPWR_TRACK_THERMAL |
( rtlpriv->efuse.thermalmeter[0] << 8 ) |
( thermalvalue << 16 ) );
RT_TRACE( rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
"Write to FW Thermal Val = 0x%x\n", fw_cmd );
rtl_write_dword( rtlpriv, WFM5, fw_cmd );
rtl92s_phy_chk_fwcmd_iodone( hw );
}
}
rtlpriv->dm.txpowercount = 0;
}
int rtl92su_hw_init(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
int err = 0;
bool rtstatus = true;
u8 i;
int wdcapra_add[] = {
REG_EDCA_BE_PARAM, REG_EDCA_BK_PARAM,
REG_EDCA_VI_PARAM, REG_EDCA_VO_PARAM};
u8 secr_value = 0x0;
/* 1. MAC Initialize */
/* Before FW download, we have to set some MAC register */
err = _rtl92su_macconfig_before_fwdownload(hw);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Failed to get the device ready for the firmware (%d)\n",
err);
return err;
}
rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
REG_PMC_FSM) >> 16) & 0xF);
/* 2. download firmware */
rtstatus = rtl92s_download_fw(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Failed to download FW. Init HW without FW now... Please copy FW into /lib/firmware/rtlwifi\n");
return -ENOENT;
}
/* After FW download, we have to reset MAC register */
_rtl92su_macconfig_after_fwdownload(hw);
/*Retrieve default FW Cmd IO map. */
rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, REG_LBUS_MON_ADDR);
rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, REG_LBUS_ADDR_MASK);
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
rtstatus = rtl92s_phy_mac_config(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
return -EINVAL;
}
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
* is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
*/
/* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
/* We must set flag avoid BB/RF config period later!! */
rtl_write_word(rtlpriv, CMDR, 0x37FC);
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
rtstatus = rtl92s_phy_bb_config(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
return -ENODEV;
}
/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
/* Before initalizing RF. We can not use FW to do RF-R/W. */
rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
/* Before RF-R/W we must execute the IO from Scott's suggestion. */
rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0xDB);
if (rtlhal->version == VERSION_8192S_ACUT)
rtl_write_byte(rtlpriv, REG_SPS1_CTRL + 3, 0x07);
else
rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x07);
rtstatus = rtl92s_phy_rf_config(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
return -EOPNOTSUPP;
}
/* After read predefined TXT, we must set BB/MAC/RF
* register as our requirement */
rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
(enum radio_path)0,
RF_CHNLBW,
RFREG_OFFSET_MASK);
rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
(enum radio_path)1,
RF_CHNLBW,
RFREG_OFFSET_MASK);
/*---- Set CCK and OFDM Block "ON"----*/
rtl_set_bbreg(hw, REG_RFPGA0_RFMOD, BCCKEN, 0x1);
rtl_set_bbreg(hw, REG_RFPGA0_RFMOD, BOFDMEN, 0x1);
/*3 Set Hardware(Do nothing now) */
_rtl92su_hw_configure(hw);
/* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
/* TX power index for different rate set. */
/* Get original hw reg values */
rtl92s_phy_get_hw_reg_originalvalue(hw);
/* Write correct tx power index */
rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
/* We must set MAC address after firmware download. */
for (i = 0; i < 6; i++)
rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
/* We enable high power and RA related mechanism after NIC
* initialized. */
if (hal_get_firmwareversion(rtlpriv) >= 0x35) {
/* Fw v.53 and later. */
rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
} else if (hal_get_firmwareversion(rtlpriv) == 0x34) {
/* Fw v.52. */
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_INIT);
rtl92s_phy_chk_fwcmd_iodone(hw);
} else {
/* Compatible earlier FW version. */
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_RESET);
rtl92s_phy_chk_fwcmd_iodone(hw);
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_ACTIVE);
rtl92s_phy_chk_fwcmd_iodone(hw);
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_REFRESH);
rtl92s_phy_chk_fwcmd_iodone(hw);
}
/* Security related
* 1. Clear all H/W keys.
* 2. Enable H/W encryption/decryption. */
rtl_cam_reset_all_entry(hw);
secr_value |= SCR_TXENCENABLE;
secr_value |= SCR_RXENCENABLE;
secr_value |= SCR_NOSKMC;
rtl_write_byte(rtlpriv, REG_SECR, secr_value);
for (i = 0; i < 4; i++)
rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
if (rtlphy->rf_type == RF_1T2R) {
bool mrc2set = true;
/* Turn on B-Path */
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
}
rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
rtl92s_dm_init(hw);
return err;
}
