Beispiel #1
0
static NDIS_STATUS rtmp_ee_flash_init(PRTMP_ADAPTER pAd, PUCHAR start)
{
	init_flag = 1;
	nv_ee_start = start;

	if (validFlashEepromID(pAd) == FALSE)
	{
		if (rtmp_ee_flash_reset(pAd, start) != NDIS_STATUS_SUCCESS)
		{
			DBGPRINT(RT_DEBUG_ERROR, ("rtmp_ee_init(): rtmp_ee_flash_init() failed\n"));
			return NDIS_STATUS_FAILURE;
		}

		/* Random number for the last bytes of MAC address*/
		{
			USHORT  Addr45;
			
			rtmp_ee_flash_read(pAd, 0x08, &Addr45);
			Addr45 = Addr45 & 0xff;
			Addr45 = Addr45 | (RandomByte(pAd)&0xf8) << 8;
			
			rtmp_ee_flash_write(pAd, 0x08, Addr45);
			DBGPRINT(RT_DEBUG_ERROR, ("The EEPROM in Flash is wrong, use default\n"));
		}

		if (validFlashEepromID(pAd) == FALSE)
		{
			DBGPRINT(RT_DEBUG_ERROR, ("rtmp_ee_flash_init(): invalid eeprom\n"));
			return NDIS_STATUS_FAILURE;
		}
	}
	
	return NDIS_STATUS_SUCCESS;
}
Beispiel #2
0
static BOOLEAN  validFlashEepromID(RTMP_ADAPTER *pAd)
{
	USHORT eeFlashId;
	int listIdx;
	
	rtmp_ee_flash_read(pAd, 0, &eeFlashId);
	for(listIdx =0 ; listIdx < EE_FLASH_ID_NUM; listIdx++)
	{
		if (eeFlashId == EE_FLASH_ID_LIST[listIdx])
			return TRUE;
	}
	return FALSE;
}
Beispiel #3
0
static void mt7628_switch_channel(RTMP_ADAPTER *pAd, UCHAR channel, BOOLEAN scan)
{
#ifdef RTMP_FLASH_SUPPORT
	USHORT doCal1 = 0, doReload = 0;
#endif /*RTMP_FLASH_SUPPORT*/

	if (pAd->CommonCfg.BBPCurrentBW == BW_20)
		CmdChannelSwitch(pAd, channel, channel, BW_20,
								pAd->CommonCfg.TxStream, pAd->CommonCfg.RxStream, scan);								
	else
		CmdChannelSwitch(pAd, pAd->CommonCfg.Channel, channel, pAd->CommonCfg.BBPCurrentBW,
							pAd->CommonCfg.TxStream, pAd->CommonCfg.RxStream, scan);

	CmdSetTxPowerCtrl(pAd, channel);
	
	/* Channel latch */
	pAd->LatchRfRegs.Channel = channel;

#ifdef RTMP_FLASH_SUPPORT
	rtmp_ee_flash_read(pAd, 0x9F, &doCal1);	
	doReload = (doCal1 & (0x1 << 7)) >> 7;
	if (scan == FALSE)
	{
		MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("reload DPD from flash , 0x9F = [%04x] doReload bit7[%x]\n", doCal1, doReload));
		/* reload DPD cal data from flash  , follow primary channel -by CSD */
		CmdLoadDPDDataFromFlash(pAd, pAd->CommonCfg.Channel, doReload);  
	}
#endif /* RTMP_FLASH_SUPPORT */


	MTWF_LOG(DBG_CAT_ALL, DBG_CAT_HW, DBG_LVL_TRACE,
			("%s(): Switch to Ch#%d(%dT%dR), BBP_BW=%d\n",
			__FUNCTION__,
			channel,
			pAd->CommonCfg.TxStream,
			pAd->CommonCfg.RxStream,
			pAd->CommonCfg.BBPCurrentBW));
}
Beispiel #4
0
/* 2 -- Change ee settings */
int	Set_EECMD_Proc(
	IN	PRTMP_ADAPTER	pAd, 
	IN	PUCHAR			arg)
{
	USHORT i;
	
	i = simple_strtol(arg, 0, 10);
	switch(i)
	{
		case 0:
			{
				USHORT value, k;
				for (k = 0; k < EEPROM_SIZE; k+=2)
				{
					RT28xx_EEPROM_READ16(pAd, k, value);
					DBGPRINT(RT_DEBUG_OFF, ("%4.4x ", value));
					if (((k+2) % 0x20) == 0)
						DBGPRINT(RT_DEBUG_OFF,("\n"));
				}
				
			}
			break;
		case 1:
			if (pAd->infType == RTMP_DEV_INF_RBUS)
			{
				DBGPRINT(RT_DEBUG_OFF, ("EEPROM reset to default......\n"));
				DBGPRINT(RT_DEBUG_OFF, ("The last byte of MAC address will be re-generated...\n"));
				if (rtmp_ee_flash_reset(pAd, nv_ee_start) != NDIS_STATUS_SUCCESS)
				{
					DBGPRINT(RT_DEBUG_ERROR, ("Set_EECMD_Proc: rtmp_ee_flash_reset() failed\n"));
					return FALSE;
				}
			
				/* Random number for the last bytes of MAC address*/
				{
					USHORT  Addr45;

					rtmp_ee_flash_read(pAd, 0x08, &Addr45);
					Addr45 = Addr45 & 0xff;
					Addr45 = Addr45 | (RandomByte(pAd)&0xf8) << 8;
					DBGPRINT(RT_DEBUG_OFF, ("Addr45 = %4x\n", Addr45));
					rtmp_ee_flash_write(pAd, 0x08, Addr45);
				}
			
				if ((rtmp_ee_flash_read(pAd, 0, &i) != 0x2880) && (rtmp_ee_flash_read(pAd, 0, &i) != 0x2860))
				{
					DBGPRINT(RT_DEBUG_ERROR, ("Set_EECMD_Proc: invalid eeprom\n"));
					return FALSE;
				}
			}
			break;
		case 2:
			{
				USHORT offset, value = 0;
				PUCHAR p;
				
				p = arg+2;
				offset = simple_strtol(p, 0, 10);
				p+=2;
				while (*p != '\0')
				{
					if (*p >= '0' && *p <= '9')
						value = (value << 4) + (*p - 0x30);
					else if (*p >= 'a' && *p <= 'f')
						value = (value << 4) + (*p - 0x57);
					else if (*p >= 'A' && *p <= 'F')
						value = (value << 4) + (*p - 0x37);
					p++;
				}
				RT28xx_EEPROM_WRITE16(pAd, offset, value);
			}
			break;
		default:
			break;
	}

	return TRUE;
}