C++ (Cpp) rtw_set_signal_stat_timer Beispiele

Beispiel #1

Datei: os_intfs.c Projekt: 383530895/linux

u8 rtw_reset_drv_sw(struct adapter *padapter)
{
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;

	/* hal_priv */
	rtw_hal_def_value_init(padapter);
	padapter->bReadPortCancel = false;
	padapter->bWritePortCancel = false;
	padapter->bRxRSSIDisplay = 0;
	pmlmepriv->scan_interval = SCAN_INTERVAL;/*  30*2 sec = 60sec */

	padapter->xmitpriv.tx_pkts = 0;
	padapter->recvpriv.rx_pkts = 0;

	pmlmepriv->LinkDetectInfo.bBusyTraffic = false;

	_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY | _FW_UNDER_LINKING);
	rtw_hal_sreset_init(padapter);
	pwrctrlpriv->pwr_state_check_cnts = 0;

	/* mlmeextpriv */
	padapter->mlmeextpriv.sitesurvey_res.state = SCAN_DISABLE;

	rtw_set_signal_stat_timer(&padapter->recvpriv);

	return _SUCCESS;
}

Beispiel #2

Datei: os_intfs.c Projekt: directhex/rtl8821au-dkms

uint8_t rtw_reset_drv_sw(struct rtl_priv *rtlpriv)
{
	uint8_t	ret8 = _SUCCESS;
	struct mlme_priv *pmlmepriv = &rtlpriv->mlmepriv;
	struct pwrctrl_priv *pwrctrlpriv = &rtlpriv->pwrctrlpriv;

	/* hal_priv */
	rtw_hal_def_value_init(rtlpriv);
	rtlpriv->bReadPortCancel = _FALSE;
	rtlpriv->bWritePortCancel = _FALSE;
	rtlpriv->bLinkInfoDump = 0;
	pmlmepriv->scan_interval = SCAN_INTERVAL;	/* 30*2 sec = 60sec */

	rtlpriv->xmitpriv.tx_pkts = 0;
	rtlpriv->recvpriv.rx_pkts = 0;

	pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE;

	_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY | _FW_UNDER_LINKING);

#ifdef CONFIG_AUTOSUSPEND
#endif

	pwrctrlpriv->pwr_state_check_cnts = 0;

	/* mlmeextpriv */
	rtlpriv->mlmeextpriv.sitesurvey_res.state = SCAN_DISABLE;

#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
	rtw_set_signal_stat_timer(&rtlpriv->recvpriv);
#endif

	return ret8;
}

Beispiel #3

Datei: os_intfs.c Projekt: hillbeast/android_kernel_ainol_novo8

u8 rtw_reset_drv_sw(_adapter *padapter)
{
	u8	ret8=_SUCCESS;	
	struct mlme_priv *pmlmepriv= &padapter->mlmepriv;
	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;

	//hal_priv
	padapter->HalFunc.init_default_value(padapter);
	padapter->bReadPortCancel = _FALSE;
	padapter->bWritePortCancel = _FALSE;
	padapter->bRxRSSIDisplay = 0;
	pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec
	pmlmepriv->scan_mode = SCAN_ACTIVE; // 1: active scan ,0 passive scan

	pwrctrlpriv->bips_processing = _FALSE;		
	pwrctrlpriv->rf_pwrstate = rf_on;
	pwrctrlpriv->bInSuspend = _FALSE;
	
	padapter->xmitpriv.tx_pkts = 0;
	padapter->recvpriv.rx_pkts = 0;

	pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE;

	_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY |_FW_UNDER_LINKING);

#ifdef CONFIG_AUTOSUSPEND	
	#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34))
		padapter->dvobjpriv.pusbdev->autosuspend_disabled = 1;//autosuspend disabled by the user
	#endif
#endif

#ifdef DBG_CONFIG_ERROR_DETECT
	if(padapter->HalFunc.sreset_reset_value)
		padapter->HalFunc.sreset_reset_value(padapter);
#endif
	pwrctrlpriv->pwr_state_check_cnts = 0;

	//mlmeextpriv
	padapter->mlmeextpriv.sitesurvey_res.state= SCAN_DISABLE;

#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
	rtw_set_signal_stat_timer(&padapter->recvpriv);
#endif

	return ret8;
}