int board_app_initialize(uintptr_t arg)
{
#if defined(HAVE_NAND) || defined(HAVE_AT25) || defined(HAVE_HSMCI) || \
defined(HAVE_USBHOST) || defined(HAVE_USBMONITOR) || \\
defined(CONFIG_AJOYSTICK) || defined(CONFIG_FS_PROCFS)
int ret;
#endif
#ifdef HAVE_NAND
/* Initialize the NAND driver */
ret = sam_nand_automount(NAND_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_nand_automount failed: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_AT25
/* Initialize the AT25 driver */
ret = sam_at25_automount(AT25_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_at25_automount failed: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_HSMCI
#ifdef CONFIG_SAMA5_HSMCI0
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
return ret;
}
#endif
#ifdef CONFIG_SAMA5_HSMCI1
/* Initialize the HSMCI1 driver */
ret = sam_hsmci_initialize(HSMCI1_SLOTNO, HSMCI1_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI1_SLOTNO, HSMCI1_MINOR, ret);
return ret;
}
#endif
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d\n", ret);
}
#endif
#ifdef CONFIG_AJOYSTICK
/* Initialize and register the joystick driver */
ret = sam_ajoy_initialization();
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the joystick driver: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = mount(NULL, SAMA5_PROCFS_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to mount procfs at %s: %d\n",
SAMA5_PROCFS_MOUNTPOINT, ret);
}
#endif
return OK;
}
int board_app_initialize(void)
{
#if defined(HAVE_NAND) || defined(HAVE_AT25) || defined(HAVE_AT24) || \
defined(HAVE_HSMCI) || defined(HAVE_USBHOST) || defined(HAVE_USBMONITOR) ||\
defined(HAVE_WM8904)
int ret;
#endif
#ifdef HAVE_NAND
/* Initialize the NAND driver */
ret = sam_nand_automount(NAND_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_nand_automount failed: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_AT25
/* Initialize the AT25 driver */
ret = sam_at25_automount(AT25_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_at25_automount failed: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_AT24
/* Initialize the AT24 driver */
ret = sam_at24_automount(AT24_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_at24_automount failed: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_HSMCI
#ifdef CONFIG_SAMA5_HSMCI0
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
return ret;
}
#endif
#ifdef CONFIG_SAMA5_HSMCI1
/* Initialize the HSMCI1 driver */
ret = sam_hsmci_initialize(HSMCI1_SLOTNO, HSMCI1_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI1_SLOTNO, HSMCI1_MINOR, ret);
return ret;
}
#endif
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Start USB monitor: %d\n", ret);
}
#endif
#ifdef HAVE_WM8904
/* Configure WM8904 audio */
ret = sam_wm8904_initialize(0);
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize WM8904 audio: %d\n",
ret);
}
#endif
return OK;
}
int sam_bringup(void)
{
int ret;
/* Register I2C drivers on behalf of the I2C tool */
sam_i2ctool();
#ifdef HAVE_NAND
/* Initialize the NAND driver */
ret = sam_nand_automount(NAND_MINOR);
if (ret < 0)
{
_err("ERROR: sam_nand_automount failed: %d\n", ret);
}
#endif
#ifdef HAVE_AT25
/* Initialize the AT25 driver */
ret = sam_at25_automount(AT25_MINOR);
if (ret < 0)
{
_err("ERROR: sam_at25_automount failed: %d\n", ret);
}
#endif
#ifdef HAVE_HSMCI
#ifdef CONFIG_SAMA5_HSMCI0
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
_err("ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
}
#ifdef CONFIG_SAMA5D4EK_HSMCI0_MOUNT
else
{
/* REVISIT: A delay seems to be required here or the mount will fail. */
/* Mount the volume on HSMCI0 */
ret = mount(CONFIG_SAMA5D4EK_HSMCI0_MOUNT_BLKDEV,
CONFIG_SAMA5D4EK_HSMCI0_MOUNT_MOUNTPOINT,
CONFIG_SAMA5D4EK_HSMCI0_MOUNT_FSTYPE,
0, NULL);
if (ret < 0)
{
_err("ERROR: Failed to mount %s: %d\n",
CONFIG_SAMA5D4EK_HSMCI0_MOUNT_MOUNTPOINT, errno);
}
}
#endif
#endif
#ifdef CONFIG_SAMA5_HSMCI1
/* Initialize the HSMCI1 driver */
ret = sam_hsmci_initialize(HSMCI1_SLOTNO, HSMCI1_MINOR);
if (ret < 0)
{
_err("ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI1_SLOTNO, HSMCI1_MINOR, ret);
}
#ifdef CONFIG_SAMA5D4EK_HSMCI1_MOUNT
else
{
/* REVISIT: A delay seems to be required here or the mount will fail. */
/* Mount the volume on HSMCI1 */
ret = mount(CONFIG_SAMA5D4EK_HSMCI1_MOUNT_BLKDEV,
CONFIG_SAMA5D4EK_HSMCI1_MOUNT_MOUNTPOINT,
CONFIG_SAMA5D4EK_HSMCI1_MOUNT_FSTYPE,
0, NULL);
if (ret < 0)
{
_err("ERROR: Failed to mount %s: %d\n",
CONFIG_SAMA5D4EK_HSMCI1_MOUNT_MOUNTPOINT, errno);
}
}
#endif
#endif
#endif
#ifdef HAVE_AUTOMOUNTER
/* Initialize the auto-mounter */
sam_automount_initialize();
#endif
#ifdef HAVE_ROMFS
/* Create a ROM disk for the /etc filesystem */
ret = romdisk_register(CONFIG_SAMA5D4EK_ROMFS_ROMDISK_MINOR, romfs_img,
NSECTORS(romfs_img_len),
CONFIG_SAMA5D4EK_ROMFS_ROMDISK_SECTSIZE);
if (ret < 0)
{
_err("ERROR: romdisk_register failed: %d\n", -ret);
}
else
{
/* Mount the file system */
ret = mount(CONFIG_SAMA5D4EK_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAMA5D4EK_ROMFS_MOUNT_MOUNTPOINT,
"romfs", MS_RDONLY, NULL);
if (ret < 0)
{
_err("ERROR: mount(%s,%s,romfs) failed: %d\n",
CONFIG_SAMA5D4EK_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAMA5D4EK_ROMFS_MOUNT_MOUNTPOINT, errno);
}
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
_err("ERROR: Failed to initialize USB host: %d\n", ret);
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start();
if (ret != OK)
{
_err("ERROR: Failed to start the USB monitor: %d\n", ret);
}
#endif
#ifdef HAVE_MAXTOUCH
/* Initialize the touchscreen */
ret = sam_tsc_setup(0);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_tsc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_PWM
/* Initialize PWM and register the PWM device. */
ret = sam_pwm_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_pwm_setup() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = sam_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_adc_setup failed: %d\n", ret);
}
#endif
#ifdef HAVE_WM8904
/* Configure WM8904 audio */
ret = sam_wm8904_initialize(0);
if (ret != OK)
{
_err("ERROR: Failed to initialize WM8904 audio: %d\n", ret);
}
#endif
#ifdef HAVE_AUDIO_NULL
/* Configure the NULL audio device */
ret = sam_audio_null_initialize(0);
if (ret != OK)
{
_err("ERROR: Failed to initialize the NULL audio device: %d\n", ret);
}
#endif
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = mount(NULL, SAMA5_PROCFS_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
_err("ERROR: Failed to mount procfs at %s: %d\n",
SAMA5_PROCFS_MOUNTPOINT, ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.
*/
UNUSED(ret);
return OK;
}
int sam_bringup(void)
{
#ifdef HAVE_PROGMEM_CHARDEV
FAR struct mtd_dev_s *mtd;
char blockdev[18];
char chardev[12];
#endif
int ret;
/* Register I2C drivers on behalf of the I2C tool */
sam_i2ctool();
#ifdef HAVE_MACADDR
/* Read the Ethernet MAC address from the AT24 FLASH and configure the
* Ethernet driver with that address.
*/
ret = sam_emac0_setmac();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_emac0_setmac() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = mount(NULL, SAME70_PROCFS_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to mount procfs at %s: %d\n",
SAME70_PROCFS_MOUNTPOINT, ret);
}
#endif
#ifdef HAVE_MTDCONFIG
/* Create an AT24xx-based MTD configuration device for storage device
* configuration information.
*/
ret = sam_at24config();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_at24config() failed: %d\n", ret);
}
#endif
#ifdef HAVE_HSMCI
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
}
#ifdef CONFIG_SAME70XPLAINED_HSMCI0_MOUNT
else
{
/* REVISIT: A delay seems to be required here or the mount will fail. */
/* Mount the volume on HSMCI0 */
ret = mount(CONFIG_SAME70XPLAINED_HSMCI0_MOUNT_BLKDEV,
CONFIG_SAME70XPLAINED_HSMCI0_MOUNT_MOUNTPOINT,
CONFIG_SAME70XPLAINED_HSMCI0_MOUNT_FSTYPE,
0, NULL);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to mount %s: %d\n",
CONFIG_SAME70XPLAINED_HSMCI0_MOUNT_MOUNTPOINT, errno);
}
}
#endif /* CONFIG_SAME70XPLAINED_HSMCI0_MOUNT */
#endif /* HAVE_HSMCI */
#ifdef HAVE_AUTOMOUNTER
/* Initialize the auto-mounter */
sam_automount_initialize();
#endif
#ifdef HAVE_ROMFS
/* Create a ROM disk for the /etc filesystem */
ret = romdisk_register(CONFIG_SAME70XPLAINED_ROMFS_ROMDISK_MINOR, romfs_img,
NSECTORS(romfs_img_len),
CONFIG_SAME70XPLAINED_ROMFS_ROMDISK_SECTSIZE);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: romdisk_register failed: %d\n", -ret);
}
else
{
/* Mount the file system */
ret = mount(CONFIG_SAME70XPLAINED_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAME70XPLAINED_ROMFS_MOUNT_MOUNTPOINT,
"romfs", MS_RDONLY, NULL);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: mount(%s,%s,romfs) failed: %d\n",
CONFIG_SAME70XPLAINED_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAME70XPLAINED_ROMFS_MOUNT_MOUNTPOINT, errno);
}
}
#endif
#ifdef HAVE_PROGMEM_CHARDEV
/* Initialize the SAME70 FLASH programming memory library */
sam_progmem_initialize();
/* Create an instance of the SAME70 FLASH program memory device driver */
mtd = progmem_initialize();
if (!mtd)
{
syslog(LOG_ERR, "ERROR: progmem_initialize failed\n");
}
/* Use the FTL layer to wrap the MTD driver as a block driver */
ret = ftl_initialize(PROGMEM_MTD_MINOR, mtd);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to initialize the FTL layer: %d\n", ret);
return ret;
}
/* Use the minor number to create device paths */
snprintf(blockdev, 18, "/dev/mtdblock%d", PROGMEM_MTD_MINOR);
snprintf(chardev, 12, "/dev/mtd%d", PROGMEM_MTD_MINOR);
/* Now create a character device on the block device */
ret = bchdev_register(blockdev, chardev, false);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: bchdev_register %s failed: %d\n", chardev, ret);
return ret;
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to start the USB monitor: %d\n", ret);
}
#endif
#ifdef CONFIG_SAMV7_MCAN
/* Initialize CAN and register the CAN driver. */
ret = sam_can_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: sam_can_setup failed: %d\n", ret);
}
#endif
#ifdef HAVE_ELF
/* Initialize the ELF binary loader */
syslog(LOG_ERR, "Initializing the ELF binary loader\n");
ret = elf_initialize();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Initialization of the ELF loader failed: %d\n", ret);
}
#endif
#if defined(CONFIG_SAMV7_DAC0) || defined(CONFIG_SAMV7_DAC1)
ret = sam_dacdev_initialize();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Initialization of the DAC module failed: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.
*/
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
#if defined (HAVE_USBDEV) || defined(HAVE_HSMCI) || defined (HAVE_PROC) || \
defined(HAVE_USBMONITOR)
int ret;
#endif
#ifdef HAVE_USBDEV
syslog(LOG_INFO, "Registering CDC/ACM serial driver\n");
ret = cdcacm_initialize(CONFIG_SAM4S_XPLAINED_PRO_CDCACM_DEVMINOR, NULL);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to create the CDC/ACM serial device: %d (%d)\n",
ret, errno);
return ret;
}
#endif
#ifdef HAVE_HSMCI
/* Initialize the HSMCI driver */
syslog(LOG_INFO, "initializing HSMCI\n");
ret = sam_hsmci_initialize();
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: sam_hsmci_initialize() failed: %d (%d)\n",
ret, errno);
return ret;
}
#endif
#ifdef HAVE_PROC
/* mount the proc filesystem */
syslog(LOG_INFO, "Mounting procfs to /proc\n");
ret = mount(NULL, "/proc", "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to mount the PROC filesystem: %d (%d)\n",
ret, errno);
return ret;
}
#endif
#if HAVE_HSMCI
syslog(LOG_INFO, "Mounting /dev/mmcsd0 to /fat\n");
ret = mount("/dev/mmcsd0", "/fat", "vfat", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to mount the FAT filesystem: %d (%d)\n",
ret, errno);
return ret;
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
syslog(LOG_INFO, "Starting USB Monitor\n");
ret = usbmonitor_start();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d (%d)\n", ret, errno);
return ret;
}
#endif
return OK;
}
int nsh_archinitialize(void)
{
#if defined(HAVE_NAND) || defined(HAVE_AT25) || defined(HAVE_HSMCI) || \
defined(HAVE_USBHOST) || defined(HAVE_USBMONITOR) || defined(HAVE_WM8904) || \
defined(HAVE_AUTOMOUNTER)
int ret;
#endif
#ifdef HAVE_NAND
/* Initialize the NAND driver */
ret = sam_nand_automount(NAND_MINOR);
if (ret < 0)
{
message("ERROR: sam_nand_automount failed: %d\n", ret);
}
#endif
#ifdef HAVE_AT25
/* Initialize the AT25 driver */
ret = sam_at25_automount(AT25_MINOR);
if (ret < 0)
{
message("ERROR: sam_at25_automount failed: %d\n", ret);
}
#endif
#ifdef HAVE_HSMCI
#ifdef CONFIG_SAMA5_HSMCI0
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
message("ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
}
#endif
#ifdef CONFIG_SAMA5_HSMCI1
/* Initialize the HSMCI1 driver */
ret = sam_hsmci_initialize(HSMCI1_SLOTNO, HSMCI1_MINOR);
if (ret < 0)
{
message("ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI1_SLOTNO, HSMCI1_MINOR, ret);
}
#endif
#endif
#ifdef HAVE_AUTOMOUNTER
/* Initialize the auto-mounter */
sam_automount_initialize();
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
message("ERROR: Failed to initialize USB host: %d\n", ret);
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
message("ERROR: Failed to start the USB monitor: %d\n", ret);
}
#endif
#ifdef HAVE_WM8904
/* Configure WM8904 audio */
ret = sam_wm8904_initialize(0);
if (ret != OK)
{
message("ERROR: Failed to initialize WM8904 audio: %d\n", ret);
}
#endif
#ifdef HAVE_AUDIO_NULL
/* Configure the NULL audio device */
ret = sam_audio_null_initialize(0);
if (ret != OK)
{
message("ERROR: Failed to initialize the NULL audio device: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.
*/
return OK;
}
int sam_bringup(void)
{
#ifdef HAVE_S25FL1
FAR struct qspi_dev_s *qspi;
#endif
#if defined(HAVE_S25FL1) || defined(HAVE_PROGMEM_CHARDEV)
FAR struct mtd_dev_s *mtd;
#endif
#if defined(HAVE_RTC_DSXXXX) || defined(HAVE_RTC_PCF85263)
FAR struct i2c_master_s *i2c;
#endif
#if defined(HAVE_S25FL1_CHARDEV) || defined(HAVE_PROGMEM_CHARDEV)
char blockdev[18];
char chardev[12];
#endif
int ret;
/* Register I2C drivers on behalf of the I2C tool */
sam_i2ctool();
#if defined(HAVE_RTC_PCF85263)
/* Get an instance of the TWIHS0 I2C interface */
i2c = sam_i2cbus_initialize(PCF85263_TWI_BUS);
if (i2c == NULL)
{
SYSLOG("ERROR: sam_i2cbus_initialize(%d) failed\n", PCF85263_TWI_BUS);
}
else
{
/* Use the I2C interface to initialize the PCF2863 timer */
ret = pcf85263_rtc_initialize(i2c);
if (ret < 0)
{
SYSLOG("ERROR: pcf85263_rtc_initialize() failed: %d\n", ret);
}
else
{
/* Synchronize the system time to the RTC time */
clock_synchronize();
}
}
#elif defined(HAVE_RTC_DSXXXX)
/* Get an instance of the TWIHS0 I2C interface */
i2c = sam_i2cbus_initialize(DSXXXX_TWI_BUS);
if (i2c == NULL)
{
SYSLOG("ERROR: sam_i2cbus_initialize(%d) failed\n", DSXXXX_TWI_BUS);
}
else
{
/* Use the I2C interface to initialize the DSXXXX timer */
ret = dsxxxx_rtc_initialize(i2c);
if (ret < 0)
{
SYSLOG("ERROR: dsxxxx_rtc_initialize() failed: %d\n", ret);
}
else
{
/* Synchronize the system time to the RTC time */
clock_synchronize();
}
}
#endif
#ifdef HAVE_MACADDR
/* Read the Ethernet MAC address from the AT24 FLASH and configure the
* Ethernet driver with that address.
*/
ret = sam_emac0_setmac();
if (ret < 0)
{
SYSLOG("ERROR: sam_emac0_setmac() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = mount(NULL, SAMV71_PROCFS_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
SYSLOG("ERROR: Failed to mount procfs at %s: %d\n",
SAMV71_PROCFS_MOUNTPOINT, ret);
}
#endif
#ifdef HAVE_MTDCONFIG
/* Create an AT24xx-based MTD configuration device for storage device
* configuration information.
*/
ret = sam_at24config();
if (ret < 0)
{
SYSLOG("ERROR: sam_at24config() failed: %d\n", ret);
}
#endif
#ifdef HAVE_HSMCI
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
SYSLOG("ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
}
#ifdef CONFIG_SAMV71XULT_HSMCI0_MOUNT
else
{
/* REVISIT: A delay seems to be required here or the mount will fail. */
/* Mount the volume on HSMCI0 */
ret = mount(CONFIG_SAMV71XULT_HSMCI0_MOUNT_BLKDEV,
CONFIG_SAMV71XULT_HSMCI0_MOUNT_MOUNTPOINT,
CONFIG_SAMV71XULT_HSMCI0_MOUNT_FSTYPE,
0, NULL);
if (ret < 0)
{
SYSLOG("ERROR: Failed to mount %s: %d\n",
CONFIG_SAMV71XULT_HSMCI0_MOUNT_MOUNTPOINT, errno);
}
}
#endif /* CONFIG_SAMV71XULT_HSMCI0_MOUNT */
#endif /* HAVE_HSMCI */
#ifdef HAVE_AUTOMOUNTER
/* Initialize the auto-mounter */
sam_automount_initialize();
#endif
#ifdef HAVE_ROMFS
/* Create a ROM disk for the /etc filesystem */
ret = romdisk_register(CONFIG_SAMV71XULT_ROMFS_ROMDISK_MINOR, romfs_img,
NSECTORS(romfs_img_len),
CONFIG_SAMV71XULT_ROMFS_ROMDISK_SECTSIZE);
if (ret < 0)
{
SYSLOG("ERROR: romdisk_register failed: %d\n", -ret);
}
else
{
/* Mount the file system */
ret = mount(CONFIG_SAMV71XULT_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAMV71XULT_ROMFS_MOUNT_MOUNTPOINT,
"romfs", MS_RDONLY, NULL);
if (ret < 0)
{
SYSLOG("ERROR: mount(%s,%s,romfs) failed: %d\n",
CONFIG_SAMV71XULT_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAMV71XULT_ROMFS_MOUNT_MOUNTPOINT, errno);
}
}
#endif
#ifdef HAVE_S25FL1
/* Create an instance of the SAMV71 QSPI device driver */
qspi = sam_qspi_initialize(0);
if (!qspi)
{
SYSLOG("ERROR: sam_qspi_initialize failed\n");
}
else
{
/* Use the QSPI device instance to initialize the
* S25FL1 device.
*/
mtd = s25fl1_initialize(qspi, true);
if (!mtd)
{
SYSLOG("ERROR: s25fl1_initialize failed\n");
}
#ifdef HAVE_S25FL1_SMARTFS
/* Configure the device with no partition support */
ret = smart_initialize(S25FL1_SMART_MINOR, mtd, NULL);
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize SmartFS: %d\n", ret);
}
#elif defined(HAVE_S25FL1_NXFFS)
/* Initialize to provide NXFFS on the S25FL1 MTD interface */
ret = nxffs_initialize(mtd);
if (ret < 0)
{
SYSLOG("ERROR: NXFFS initialization failed: %d\n", ret);
}
/* Mount the file system at /mnt/s25fl1 */
ret = mount(NULL, "/mnt/s25fl1", "nxffs", 0, NULL);
if (ret < 0)
{
SYSLOG("ERROR: Failed to mount the NXFFS volume: %d\n", errno);
return ret;
}
#else /* if defined(HAVE_S25FL1_CHARDEV) */
/* Use the FTL layer to wrap the MTD driver as a block driver */
ret = ftl_initialize(S25FL1_MTD_MINOR, mtd);
if (ret < 0)
{
SYSLOG("ERROR: Failed to initialize the FTL layer: %d\n", ret);
return ret;
}
/* Use the minor number to create device paths */
snprintf(blockdev, 18, "/dev/mtdblock%d", S25FL1_MTD_MINOR);
snprintf(chardev, 12, "/dev/mtd%d", S25FL1_MTD_MINOR);
/* Now create a character device on the block device */
ret = bchdev_register(blockdev, chardev, false);
if (ret < 0)
{
SYSLOG("ERROR: bchdev_register %s failed: %d\n", chardev, ret);
return ret;
}
#endif
}
#endif
#ifdef HAVE_PROGMEM_CHARDEV
/* Initialize the SAMV71 FLASH programming memory library */
sam_progmem_initialize();
/* Create an instance of the SAMV71 FLASH program memory device driver */
mtd = progmem_initialize();
if (!mtd)
{
SYSLOG("ERROR: progmem_initialize failed\n");
}
/* Use the FTL layer to wrap the MTD driver as a block driver */
ret = ftl_initialize(PROGMEM_MTD_MINOR, mtd);
if (ret < 0)
{
SYSLOG("ERROR: Failed to initialize the FTL layer: %d\n", ret);
return ret;
}
/* Use the minor number to create device paths */
snprintf(blockdev, 18, "/dev/mtdblock%d", PROGMEM_MTD_MINOR);
snprintf(chardev, 12, "/dev/mtd%d", PROGMEM_MTD_MINOR);
/* Now create a character device on the block device */
ret = bchdev_register(blockdev, chardev, false);
if (ret < 0)
{
SYSLOG("ERROR: bchdev_register %s failed: %d\n", chardev, ret);
return ret;
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize USB host: %d\n", ret);
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
SYSLOG("ERROR: Failed to start the USB monitor: %d\n", ret);
}
#endif
#ifdef HAVE_WM8904
/* Configure WM8904 audio */
ret = sam_wm8904_initialize(0);
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize WM8904 audio: %d\n", ret);
}
#endif
#ifdef HAVE_AUDIO_NULL
/* Configure the NULL audio device */
ret = sam_audio_null_initialize(0);
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize the NULL audio device: %d\n", ret);
}
#endif
#ifdef HAVE_ELF
/* Initialize the ELF binary loader */
SYSLOG("Initializing the ELF binary loader\n");
ret = elf_initialize();
if (ret < 0)
{
SYSLOG("ERROR: Initialization of the ELF loader failed: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.
*/
UNUSED(ret);
return OK;
}
int sam_bringup(void)
{
int ret;
#ifdef HAVE_MACADDR
/* Read the Ethernet MAC address from the AT24 FLASH and configure the
* Ethernet driver with that address.
*/
ret = sam_emac0_setmac();
if (ret < 0)
{
SYSLOG("ERROR: sam_emac0_setmac() failed: %d\n", ret);
}
#endif
#ifdef HAVE_MTDCONFIG
/* Create an AT24xx-based MTD configuration device for storage device
* configuration information.
*/
ret = sam_at24config();
if (ret < 0)
{
SYSLOG("ERROR: sam_at24config() failed: %d\n", ret);
}
#endif
#ifdef HAVE_HSMCI
/* Initialize the HSMCI0 driver */
ret = sam_hsmci_initialize(HSMCI0_SLOTNO, HSMCI0_MINOR);
if (ret < 0)
{
SYSLOG("ERROR: sam_hsmci_initialize(%d,%d) failed: %d\n",
HSMCI0_SLOTNO, HSMCI0_MINOR, ret);
}
#ifdef CONFIG_SAMV71XULT_HSMCI0_MOUNT
else
{
/* REVISIT: A delay seems to be required here or the mount will fail. */
/* Mount the volume on HSMCI0 */
ret = mount(CONFIG_SAMV71XULT_HSMCI0_MOUNT_BLKDEV,
CONFIG_SAMV71XULT_HSMCI0_MOUNT_MOUNTPOINT,
CONFIG_SAMV71XULT_HSMCI0_MOUNT_FSTYPE,
0, NULL);
if (ret < 0)
{
SYSLOG("ERROR: Failed to mount %s: %d\n",
CONFIG_SAMV71XULT_HSMCI0_MOUNT_MOUNTPOINT, errno);
}
}
#endif /* CONFIG_SAMV71XULT_HSMCI0_MOUNT */
#endif /* HAVE_HSMCI */
#ifdef HAVE_AUTOMOUNTER
/* Initialize the auto-mounter */
sam_automount_initialize();
#endif
#ifdef HAVE_ROMFS
/* Create a ROM disk for the /etc filesystem */
ret = romdisk_register(CONFIG_SAMV71XULT_ROMFS_ROMDISK_MINOR, romfs_img,
NSECTORS(romfs_img_len),
CONFIG_SAMV71XULT_ROMFS_ROMDISK_SECTSIZE);
if (ret < 0)
{
SYSLOG("ERROR: romdisk_register failed: %d\n", -ret);
}
else
{
/* Mount the file system */
ret = mount(CONFIG_SAMV71XULT_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAMV71XULT_ROMFS_MOUNT_MOUNTPOINT,
"romfs", MS_RDONLY, NULL);
if (ret < 0)
{
SYSLOG("ERROR: mount(%s,%s,romfs) failed: %d\n",
CONFIG_SAMV71XULT_ROMFS_ROMDISK_DEVNAME,
CONFIG_SAMV71XULT_ROMFS_MOUNT_MOUNTPOINT, errno);
}
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. sam_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = sam_usbhost_initialize();
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize USB host: %d\n", ret);
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
SYSLOG("ERROR: Failed to start the USB monitor: %d\n", ret);
}
#endif
#ifdef HAVE_WM8904
/* Configure WM8904 audio */
ret = sam_wm8904_initialize(0);
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize WM8904 audio: %d\n", ret);
}
#endif
#ifdef HAVE_AUDIO_NULL
/* Configure the NULL audio device */
ret = sam_audio_null_initialize(0);
if (ret != OK)
{
SYSLOG("ERROR: Failed to initialize the NULL audio device: %d\n", ret);
}
#endif
#ifdef HAVE_ELF
/* Initialize the ELF binary loader */
SYSLOG("Initializing the ELF binary loader\n");
ret = elf_initialize();
if (ret < 0)
{
SYSLOG("ERROR: Initialization of the ELF loader failed: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.
*/
UNUSED(ret);
return OK;
}