void sati_atapi_translate_request_sense_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * atapi_io
)
{
//sense data is already in place.
SCI_SSP_RESPONSE_IU_T * rsp_iu = (SCI_SSP_RESPONSE_IU_T*)
sati_cb_get_response_iu_address(scsi_io);
sati_scsi_common_response_iu_construct(
rsp_iu,
SCSI_STATUS_CHECK_CONDITION,
sati_scsi_get_sense_data_length(sequence, scsi_io),
SCSI_RESPONSE_DATA_PRES_SENSE_DATA
);
sequence->is_sense_response_set = TRUE;
sequence->state = SATI_SEQUENCE_STATE_FINAL;
}
/**
* @brief This method will construct the sense data buffer in the user's
* sense data buffer location. Additionally, it will set the user's
* SCSI status.
*
* @param[in] sequence This parameter specifies the translation sequence
* for which to construct the sense data.
* @param[in] register_fis This parameter specifies the fis from which
* to get the data.
* @param[in,out] scsi_io This parameter specifies the user's IO request
* for which to construct the sense data.
* @param[in] scsi_status This parameter specifies the SCSI status
* value for the user's IO request.
* @param[in] sense_key This parameter specifies the sense key to
* be set for the user's IO request.
* @param[in] additional_sense_code This parameter specifies the
* additional sense code (ASC) key to be set for the user's
* IO request.
* @param[in] additional_sense_code_qualifier This parameter specifies
* the additional sense code qualifier (ASCQ) key to be set
* for the user's IO request.
*
* @return none
*/
static
void sati_passthrough_construct_sense(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
U8 * register_fis,
void * scsi_io,
U8 scsi_status,
U8 sense_key,
U8 additional_sense_code,
U8 additional_sense_code_qualifier
)
{
U8 * sense_data;
U32 sense_len;
U8 * cdb;
unsigned char sector_count_upper;
unsigned char lba_upper;
#ifdef SATI_TRANSPORT_SUPPORTS_SAS
SCI_SSP_RESPONSE_IU_T * rsp_iu = (SCI_SSP_RESPONSE_IU_T*)
sati_cb_get_response_iu_address(scsi_io);
sati_scsi_common_response_iu_construct(
rsp_iu,
scsi_status,
SCSI_FIXED_SENSE_DATA_BASE_LENGTH,
SCSI_RESPONSE_DATA_PRES_SENSE_DATA
);
sense_data = (U8*) rsp_iu->data;
sense_len = SSP_RESPONSE_IU_MAX_DATA * 4; // dwords to bytes
#else
sense_data = sati_cb_get_sense_data_address(scsi_io);
sense_len = sati_cb_get_sense_data_length(scsi_io);
#endif // SATI_TRANSPORT_SUPPORTS_SAS
sati_scsi_sense_data_construct(
sequence,
scsi_io,
scsi_status,
sense_key,
additional_sense_code,
additional_sense_code_qualifier
);
cdb = sati_cb_get_cdb_address(scsi_io);
if (sati_get_ata_sector_count_ext(register_fis) != 0) {
sector_count_upper = 1;
} else {
sector_count_upper = 0;
}
if (sati_get_ata_lba_high_ext(register_fis) != 0 ||
sati_get_ata_lba_mid_ext(register_fis) != 0 ||
sati_get_ata_lba_low_ext(register_fis) != 0) {
lba_upper = 1;
} else {
lba_upper = 0;
}
// Information section
sati_set_sense_data_byte(sense_data, sense_len, 3, (U8)sati_get_ata_error(register_fis));
sati_set_sense_data_byte(sense_data, sense_len, 4, (U8)sati_get_ata_status(register_fis));
sati_set_sense_data_byte(sense_data, sense_len, 5, sati_get_ata_device(register_fis));
sati_set_sense_data_byte(sense_data, sense_len, 6, sati_get_ata_sector_count(register_fis));
// Command specific section
sati_set_sense_data_byte(sense_data, sense_len, 8, (PASSTHROUGH_CDB_EXTEND(cdb) << 7) | (sector_count_upper << 6) | (lba_upper << 5));
sati_set_sense_data_byte(sense_data, sense_len, 9, sati_get_ata_lba_high(register_fis));
sati_set_sense_data_byte(sense_data, sense_len, 10, sati_get_ata_lba_mid(register_fis));
sati_set_sense_data_byte(sense_data, sense_len, 11, sati_get_ata_lba_low(register_fis));
sequence->is_sense_response_set = TRUE;
}
