void wepConfig::on_buttonBox_clicked(QAbstractButton *button)
{
if (buttonBox->standardButton(button) == QDialogButtonBox::Ok) {
saveAndClose();
} else { // the cancel button
close();
}
}
MashEditor::MashEditor(QWidget* parent) : QDialog(parent), mashObs(0)
{
setupUi(this);
connect(pushButton_fromEquipment, SIGNAL(clicked()), this, SLOT(fromEquipment()) );
connect(this, SIGNAL(accepted()), this, SLOT(saveAndClose()) );
connect(this, SIGNAL(rejected()), this, SLOT(closeEditor()) );
}
void SettingsDialog::createLayout() {
QFormLayout *formLayout = new QFormLayout();
formLayout->addRow(QString::fromUtf8("Приложение"), appIdEdit);
formLayout->addRow(QString::fromUtf8("Права доступа"), permissionsEdit);
formLayout->addRow(QString::fromUtf8("База данных"), dbpathEdit);
QHBoxLayout *actionsLayout = new QHBoxLayout();
actionsLayout->addStretch();
QPushButton *applyButton = new QPushButton(QString::fromUtf8("Принять"));
applyButton->setDefault(true);
connect(applyButton, SIGNAL(clicked()), this, SLOT(saveAndClose()));
QPushButton *cancelButton = new QPushButton(QString::fromUtf8("Отмена"));
connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancelAndClose()));
actionsLayout->addWidget(applyButton);
actionsLayout->addWidget(cancelButton);
QVBoxLayout *mainLayout = new QVBoxLayout(this);
mainLayout->addLayout(formLayout);
mainLayout->addLayout(actionsLayout);
}
ConfigurationDialog::ConfigurationDialog(QWidget *parent) :
QDialog(parent),
ui(new Ui::ConfigurationDialog)
{
ui->setupUi(this);
ui->menuTree->setCurrentItem(ui->menuTree->topLevelItem(0));
connect(ui->buttonBox,SIGNAL(accepted()),this,SLOT(saveAndClose()));
connect(ui->buttonBox,SIGNAL(rejected()),this,SLOT(close()));
connect(ui->menuTree, SIGNAL(itemSelectionChanged()), this, SLOT(selectionChanged()));
Configuration *config = Configuration::getInstance();
ui->horizontalSpinBox->setValue(config->getHorizontalSlots());
ui->verticalSpinBox->setValue(config->getVerticalSlots());
ui->playerSpinBox->setValue(config->getPlayer());
ui->playlistFadeSpinBox->setValue(config->getPlaylistFade());
ui->slotFadeSpinBox->setValue(config->getSlotFade());
ui->bufferSpinBox->setValue(config->getSlotBuffer());
ui->keyboardSyncCheckBox->setChecked(config->getLayerKeyboardSync());
ui->playlistFadePosSpinBox->setValue(config->getPlaylistFPos());
ui->layerSpinBox->setValue(config->getLayer());
ui->deviceSelectWidget->setNewTitel(tr("PFL"));
ui->deviceSelectWidget->selectDevice(config->getPFLDriver(),config->getPFLDevice(),config->getPFLChannel());
ui->defaultDeviceWidget->setNewTitel(tr("Standard Audiogerät"));
ui->defaultDeviceWidget->selectDevice(config->getDefaultDriver(),config->getDefaultDevice(),config->getDefaultChannel());
ui->slotTimeSpinBox->setValue(config->getSlotTimeSize());
ui->pauseCheckBox->setChecked(config->getPauseButton());
QTreeWidgetItem *layerItem = ui->menuTree->topLevelItem(1);
for (int i=0;i<config->getLayer();i++) {
QTreeWidgetItem *item = new QTreeWidgetItem();
item->setText(0,"Layer "+QString::number(i+1));
layerItem->addChild(item);
}
layerItem->setExpanded(true);
connect(ui->layerSpinBox, SIGNAL(valueChanged(int)), this, SLOT(updateLayerCount(int)));
}
// This is the main constructor.
PropertiesDialog::PropertiesDialog(QWidget *parent, const QVector<QString> Qheader, const QString sourceInput, const QString targetInput) : QDialog(parent) {
// We first set up the standard elements of the interface, which are only two labels and two buttons.
sourceLabel = new QLabel(sourceInput);
targetLabel = new QLabel(targetInput);
saveCloseButton = new QPushButton(tr("Save and Close"));
cancelButton = new QPushButton(tr("Cancel"));
// We dynamically create two lists of checkboxes as well, which represent potential properties.
// Only variables that were not already selected as source and target nodes are included as options.
QVectorIterator<QString> it(Qheader);
while (it.hasNext()) {
QPointer<QCheckBox> tempBoxOne = new QCheckBox(it.peekNext(), this);
QPointer<QCheckBox> tempBoxTwo = new QCheckBox(it.next(), this);
if (tempBoxOne->text() != sourceInput && tempBoxOne->text() != targetInput) {
sourceVector.push_back(tempBoxOne);
} else {
delete tempBoxOne;
}
if (tempBoxTwo->text() != targetInput && tempBoxTwo->text() != sourceInput) {
targetVector.push_back(tempBoxTwo);
if (sourceInput == targetInput) {
tempBoxTwo->setEnabled(false);
}
} else {
delete tempBoxTwo;
}
}
// We then set up the signals. Basically, save and close is the only signal that will send information from the properties dialog
// to the main dialog.
connect(saveCloseButton, SIGNAL(clicked()), this, SLOT(saveAndClose()));
connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancel())); // In case the user decides not to set properties.
// Then we create our layout.
QPointer<QVBoxLayout> mainLayout = new QVBoxLayout;
QPointer<QHBoxLayout> mainBodyLayout = new QHBoxLayout;
QPointer<QVBoxLayout> mainBodyLeft = new QVBoxLayout;
QPointer<QVBoxLayout> mainBodyRight = new QVBoxLayout;
mainBodyLeft->addWidget(sourceLabel);
QVectorIterator<QPointer<QCheckBox> > sI(sourceVector);
while (sI.hasNext()) {
mainBodyLeft->addWidget(sI.next());
}
mainBodyRight->addWidget(targetLabel);
QVectorIterator<QPointer<QCheckBox> > tI(targetVector);
while (tI.hasNext()) {
mainBodyRight->addWidget(tI.next());
}
mainBodyLayout->addLayout(mainBodyLeft);
mainBodyLayout->addLayout(mainBodyRight);
mainLayout->addLayout(mainBodyLayout);
QPointer<QHBoxLayout> lowerLayout = new QHBoxLayout;
lowerLayout->addWidget(saveCloseButton);
lowerLayout->addWidget(cancelButton);
mainLayout->addLayout(lowerLayout);
setLayout(mainLayout);
setWindowTitle(tr("Set Properties"));
setFixedHeight(sizeHint().height());
// And that finishes our constructor
}
OptionDialog::OptionDialog(QWidget* parent)
{
int i;
// I need a lot of control over what is displayed on the DbConfig dialog.
// Maybe designer can do it? No idea. So I did this hybrid model, and I
// think it will end up biting my ...
// anyway. It isn't pretty
setupUi(this);
createPostgresElements();
createSQLiteElements();
if( parent != 0 )
{
setWindowIcon(parent->windowIcon());
}
ndxToLangCode <<
"ca" <<
"cs" <<
"da" <<
"de" <<
"el" <<
"en" <<
"es" <<
"et" <<
"eu" <<
"fr" <<
"gl" <<
"hu" <<
"it" <<
"lv" <<
"nb" <<
"nl" <<
"pl" <<
"pt" <<
"ru" <<
"sr" <<
"sv" <<
"tr" <<
"zh";
// Do this just to have model indices to set icons.
comboBox_lang->addItems(ndxToLangCode);
// MUST correspond to ndxToLangCode.
langIcons <<
/*ca*/ QIcon(":images/flagCatalonia.svg") <<
/*cs*/ QIcon(":images/flagCzech.svg") <<
/*da*/ QIcon() <<
/*de*/ QIcon(":images/flagGermany.svg") <<
/*el*/ QIcon(":images/flagGreece.svg") <<
/*en*/ QIcon(":images/flagUK.svg") <<
/*es*/ QIcon(":images/flagSpain.svg") <<
/*et*/ QIcon() <<
/*eu*/ QIcon() <<
/*fr*/ QIcon(":images/flagFrance.svg") <<
/*gl*/ QIcon() <<
/*hu*/ QIcon() <<
/*it*/ QIcon(":images/flagItaly.svg") <<
/*lv*/ QIcon() <<
/*nb*/ QIcon() <<
/*nl*/ QIcon(":images/flagNetherlands.svg") <<
/*pl*/ QIcon(":images/flagPoland.svg") <<
/*pt*/ QIcon(":images/flagBrazil.svg") <<
/*ru*/ QIcon(":images/flagRussia.svg") <<
/*sr*/ QIcon() <<
/*sv*/ QIcon() <<
/*tr*/ QIcon() <<
/*zh*/ QIcon(":images/flagChina.svg");
// Set icons.
for( i = 0; i < langIcons.size(); ++i )
comboBox_lang->setItemIcon(i, langIcons[i]);
// Call this here to set up translatable strings.
retranslate();
// Populate combo boxes on the "Units" tab
weightComboBox->addItem(tr("SI units"), QVariant(SI));
weightComboBox->addItem(tr("US traditional units"), QVariant(USCustomary));
weightComboBox->addItem(tr("British imperial units"), QVariant(Imperial));
temperatureComboBox->addItem(tr("Celsius"), QVariant(Celsius));
temperatureComboBox->addItem(tr("Fahrenheit"), QVariant(Fahrenheit));
volumeComboBox->addItem(tr("SI units"), QVariant(SI));
volumeComboBox->addItem(tr("US traditional units"), QVariant(USCustomary));
volumeComboBox->addItem(tr("British imperial units"), QVariant(Imperial));
gravityComboBox->addItem(tr("20C/20C Specific Gravity"), QVariant(Brewtarget::SG));
gravityComboBox->addItem(tr("Plato/Brix/Balling"), QVariant(Brewtarget::PLATO));
dateComboBox->addItem(tr("mm-dd-YYYY"), QVariant(Unit::displayUS));
dateComboBox->addItem(tr("dd-mm-YYYY"), QVariant(Unit::displayImp));
dateComboBox->addItem(tr("YYYY-mm-dd"), QVariant(Unit::displaySI));
colorComboBox->addItem(tr("SRM"), QVariant(Brewtarget::SRM));
colorComboBox->addItem(tr("EBC"), QVariant(Brewtarget::EBC));
// Populate combo boxes on the "Formulas" tab
ibuFormulaComboBox->addItem(tr("Tinseth's approximation"), QVariant(Brewtarget::TINSETH));
ibuFormulaComboBox->addItem(tr("Rager's approximation"), QVariant(Brewtarget::RAGER));
ibuFormulaComboBox->addItem(tr("Noonan's approximation"), QVariant(Brewtarget::NOONAN));
colorFormulaComboBox->addItem(tr("Mosher's approximation"), QVariant(Brewtarget::MOSHER));
colorFormulaComboBox->addItem(tr("Daniel's approximation"), QVariant(Brewtarget::DANIEL));
colorFormulaComboBox->addItem(tr("Morey's approximation"), QVariant(Brewtarget::MOREY));
connect( buttonBox, SIGNAL( accepted() ), this, SLOT( saveAndClose() ) );
connect( buttonBox, SIGNAL( rejected() ), this, SLOT( cancel() ) );
// database panel stuff
comboBox_engine->addItem( tr("SQLite (default)"), QVariant(Brewtarget::SQLITE));
comboBox_engine->addItem( tr("PostgreSQL"), QVariant(Brewtarget::PGSQL));
connect( comboBox_engine, SIGNAL( currentIndexChanged(int) ), this, SLOT( setEngine(int) ) );
connect( pushButton_testConnection, SIGNAL( clicked() ), this, SLOT(testConnection()));
// figure out which database we have
setDbDialog((Brewtarget::DBTypes)Brewtarget::option("dbType", Brewtarget::SQLITE).toInt());
// Set the signals
connect( checkBox_savePassword, SIGNAL(clicked(bool)), this, SLOT(savePassword(bool)));
connect( btStringEdit_hostname, SIGNAL( textModified() ), this, SLOT(testRequired()));
connect( btStringEdit_portnum, SIGNAL( textModified() ), this, SLOT(testRequired()));
connect( btStringEdit_schema, SIGNAL( textModified() ), this, SLOT(testRequired()));
connect( btStringEdit_dbname, SIGNAL( textModified() ), this, SLOT(testRequired()));
connect( btStringEdit_username, SIGNAL( textModified() ), this, SLOT(testRequired()));
connect( btStringEdit_password, SIGNAL( textModified() ), this, SLOT(testRequired()));
connect( pushButton_browseDataDir, SIGNAL( clicked() ), this, SLOT( setDataDir() ) );
connect( pushButton_browseBackupDir, SIGNAL( clicked() ), this, SLOT( setBackupDir() ) );
connect( pushButton_resetToDefault, SIGNAL( clicked() ), this, SLOT( resetToDefault() ) );
pushButton_testConnection->setEnabled(false);
}
OptionDialog::OptionDialog(QWidget* parent)
{
int i;
setupUi(this);
if( parent != 0 )
{
setWindowIcon(parent->windowIcon());
}
ndxToLangCode <<
"ca" <<
"cs" <<
"da" <<
"de" <<
"el" <<
"en" <<
"es" <<
"et" <<
"eu" <<
"fr" <<
"gl" <<
"hu" <<
"it" <<
"lv" <<
"nb" <<
"nl" <<
"pl" <<
"pt" <<
"ru" <<
"sr" <<
"sv" <<
"tr" <<
"zh";
// Do this just to have model indices to set icons.
comboBox_lang->addItems(ndxToLangCode);
// MUST correspond to ndxToLangCode.
langIcons <<
/*ca*/ QIcon(":images/flagCatalonia.svg") <<
/*cs*/ QIcon(":images/flagCzech.svg") <<
/*da*/ QIcon() <<
/*de*/ QIcon(":images/flagGermany.svg") <<
/*el*/ QIcon(":images/flagGreece.svg") <<
/*en*/ QIcon(":images/flagUK.svg") <<
/*es*/ QIcon(":images/flagSpain.svg") <<
/*et*/ QIcon() <<
/*eu*/ QIcon() <<
/*fr*/ QIcon(":images/flagFrance.svg") <<
/*gl*/ QIcon() <<
/*hu*/ QIcon() <<
/*it*/ QIcon(":images/flagItaly.svg") <<
/*lv*/ QIcon() <<
/*nb*/ QIcon() <<
/*nl*/ QIcon(":images/flagNetherlands.svg") <<
/*pl*/ QIcon(":images/flagPoland.svg") <<
/*pt*/ QIcon(":images/flagBrazil.svg") <<
/*ru*/ QIcon(":images/flagRussia.svg") <<
/*sr*/ QIcon() <<
/*sv*/ QIcon() <<
/*tr*/ QIcon() <<
/*zh*/ QIcon(":images/flagChina.svg");
// Set icons.
for( i = 0; i < langIcons.size(); ++i )
comboBox_lang->setItemIcon(i, langIcons[i]);
// Call this here to set up translatable strings.
retranslate();
// Populate combo boxes on the "Units" tab
weightComboBox->addItem(tr("SI units"), QVariant(SI));
weightComboBox->addItem(tr("US traditional units"), QVariant(USCustomary));
weightComboBox->addItem(tr("British imperial units"), QVariant(Imperial));
temperatureComboBox->addItem(tr("Celsius"), QVariant(Celsius));
temperatureComboBox->addItem(tr("Fahrenheit"), QVariant(Fahrenheit));
volumeComboBox->addItem(tr("SI units"), QVariant(SI));
volumeComboBox->addItem(tr("US traditional units"), QVariant(USCustomary));
volumeComboBox->addItem(tr("British imperial units"), QVariant(Imperial));
gravityComboBox->addItem(tr("20C/20C Specific Gravity"), QVariant(Brewtarget::SG));
gravityComboBox->addItem(tr("Plato/Brix/Balling"), QVariant(Brewtarget::PLATO));
dateComboBox->addItem(tr("mm-dd-YYYY"), QVariant(Unit::displayUS));
dateComboBox->addItem(tr("dd-mm-YYYY"), QVariant(Unit::displayImp));
dateComboBox->addItem(tr("YYYY-mm-dd"), QVariant(Unit::displaySI));
colorComboBox->addItem(tr("SRM"), QVariant(Brewtarget::SRM));
colorComboBox->addItem(tr("EBC"), QVariant(Brewtarget::EBC));
// Populate combo boxes on the "Formulas" tab
ibuFormulaComboBox->addItem(tr("Tinseth's approximation"), QVariant(Brewtarget::TINSETH));
ibuFormulaComboBox->addItem(tr("Rager's approximation"), QVariant(Brewtarget::RAGER));
ibuFormulaComboBox->addItem(tr("Noonan's approximation"), QVariant(Brewtarget::NOONAN));
colorFormulaComboBox->addItem(tr("Mosher's approximation"), QVariant(Brewtarget::MOSHER));
colorFormulaComboBox->addItem(tr("Daniel's approximation"), QVariant(Brewtarget::DANIEL));
colorFormulaComboBox->addItem(tr("Morey's approximation"), QVariant(Brewtarget::MOREY));
connect( buttonBox, SIGNAL( accepted() ), this, SLOT( saveAndClose() ) );
connect( buttonBox, SIGNAL( rejected() ), this, SLOT( cancel() ) );
connect( pushButton_dbDirBrowse, SIGNAL( clicked() ), this, SLOT( setDataDir() ) );
connect( pushButton_dbDirDefault, SIGNAL( clicked() ), this, SLOT( defaultDataDir() ) );
}
SettingsDialog::SettingsDialog(QWidget *parent)
: QDialog(parent)
{
wallphiller = qobject_cast<Wallphiller*>(parent);
//Layout
QVBoxLayout *vbox_main = new QVBoxLayout;
setLayout(vbox_main);
setWindowTitle(tr("Settings"));
//Selection frame
QGroupBox *grp_routine = new QGroupBox(tr("Wallpaper change routine"));
vbox_main->addWidget(grp_routine);
QVBoxLayout *vbox_routine = new QVBoxLayout;
grp_routine->setLayout(vbox_routine);
//Radio buttons
QString auto_title = tr("Auto");
QString auto_title_info;
switch (wallphiller->desktopEnvironment())
{
case DE::Gnome:
auto_title_info = "Gnome";
break;
case DE::Mate:
auto_title_info = "Mate";
break;
case DE::Cinnamon:
auto_title_info = "Cinnamon";
break;
case DE::KDE:
auto_title_info = "KDE";
break;
case DE::XFCE:
auto_title_info = "XFCE";
break;
case DE::LXDE:
auto_title_info = "LXDE";
break;
case DE::Windows:
auto_title_info = "Windows";
break;
case DE::None:
auto_title_info = tr("not detected");
break;
}
if (!auto_title_info.isEmpty())
{
auto_title += " (" + auto_title_info + ")";
}
opt_auto = new QRadioButton(auto_title);
vbox_routine->addWidget(opt_auto);
opt_command = new QRadioButton(tr("Custom command"));
vbox_routine->addWidget(opt_command);
//Radio button actions
connect(opt_auto,
SIGNAL(toggled(bool)),
SLOT(enableRoutineAuto(bool)));
connect(opt_command,
SIGNAL(toggled(bool)),
SLOT(enableRoutineCommand(bool)));
//Custom command field
txt_command = new QLineEdit;
txt_command->setPlaceholderText(tr("command --option %f"));
txt_command->setToolTip(tr(
"Enter a custom command that will be run to change your wallpaper. "
"%f will be replaced with a local file path, "
"%u will be replaced with the path formatted as url - both quoted."));
txt_command->setEnabled(false);
vbox_routine->addWidget(txt_command);
QString saved_command = wallphiller->changeRoutineCommand();
connect(txt_command,
SIGNAL(editingFinished()),
SLOT(checkRoutineCommand()));
txt_command->setText(saved_command);
//Saved routine
QString saved_routine = wallphiller->changeRoutine();
if (saved_routine == "command")
{
opt_command->setChecked(true);
}
else
{
opt_auto->setChecked(true);
}
//Interval frame
QGroupBox *grp_interval = new QGroupBox(tr("Interval"));
vbox_main->addWidget(grp_interval);
QFormLayout *interval_form_layout = new QFormLayout;
grp_interval->setLayout(interval_form_layout);
//Interval field
QHBoxLayout *hbox_interval = new QHBoxLayout;
interval_form_layout->addRow(tr("Interval"), hbox_interval);
txt_interval_value = new QSpinBox;
txt_interval_value->setMinimum(0);
txt_interval_value->setMaximum(999);
new_interval_value = wallphiller->intervalValue();
txt_interval_value->setValue(new_interval_value);
hbox_interval->addWidget(txt_interval_value);
connect(txt_interval_value,
SIGNAL(valueChanged(int)),
SLOT(checkIntervalValue(int)));
cmb_interval_unit = new QComboBox;
cmb_interval_unit->addItem(tr("startup/manual"), "ONCE");
cmb_interval_unit->addItem(tr("minutes"), "MINUTES");
cmb_interval_unit->addItem(tr("hours"), "HOURS");
cmb_interval_unit->addItem(tr("New York minutes"), "NYMINUTES");
cmb_interval_unit->addItem(tr("nanocenturies"), "NANOCENTURIES");
cmb_interval_unit->setToolTip(tr(
"Define how often your wallpaper should be changed automatically. "
"Select \"startup\" to only have it changed once "
"on program startup."));
cmb_interval_unit->setCurrentIndex(
cmb_interval_unit->findData(wallphiller->intervalUnit()));
hbox_interval->addWidget(cmb_interval_unit);
connect(cmb_interval_unit,
SIGNAL(currentIndexChanged(int)),
SLOT(checkIntervalUnit(int)));
checkIntervalUnit(cmb_interval_unit->currentIndex());
//Cache frame
QGroupBox *grp_cache = new QGroupBox(tr("Cache"));
vbox_main->addWidget(grp_cache);
QFormLayout *cache_layout = new QFormLayout;
grp_cache->setLayout(cache_layout);
//Cache limit
txt_cache_limit = new QSpinBox;
txt_cache_limit->setMinimum(1);
txt_cache_limit->setMaximum(10 * 1024); //10 GB limit
new_cache_limit = wallphiller->cacheLimit(); //limit in MB
txt_cache_limit->setValue(new_cache_limit);
txt_cache_limit->setToolTip(tr(
"Enter the total amount of memory (in MB) that may be used "
"for the previews. At least 10 MB are recommended. "
"A low value will save some memory while the program is running."));
cache_layout->addRow(tr("Cache limit (MB)"), txt_cache_limit);
connect(txt_cache_limit,
SIGNAL(valueChanged(int)),
SLOT(checkCacheLimit(int)));
//Horizontal line
QFrame *hline = new QFrame;
hline->setFrameShape(QFrame::HLine);
vbox_main->addWidget(hline);
//Buttons
button_box = new QDialogButtonBox;
vbox_main->addWidget(button_box);
QPushButton *btn_ok = button_box->addButton(QDialogButtonBox::Ok);
connect(btn_ok, SIGNAL(clicked()), SLOT(saveAndClose()));
QPushButton *btn_cancel =
button_box->addButton(QDialogButtonBox::Cancel);
connect(btn_cancel, SIGNAL(clicked()), SLOT(cancel()));
//Quit on close (don't keep running invisibly by default)
setAttribute(Qt::WA_DeleteOnClose); //quit on close
}
