/*
* Generic idle loop implementation
*
* Called with polling cleared.
*/
static void do_idle(void)
{
/*
* If the arch has a polling bit, we maintain an invariant:
*
* Our polling bit is clear if we're not scheduled (i.e. if rq->curr !=
* rq->idle). This means that, if rq->idle has the polling bit set,
* then setting need_resched is guaranteed to cause the CPU to
* reschedule.
*/
__current_set_polling();
tick_nohz_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
if (cpu_is_offline(smp_processor_id())) {
cpuhp_report_idle_dead();
arch_cpu_idle_dead();
}
local_irq_disable();
arch_cpu_idle_enter();
/*
* In poll mode we reenable interrupts and spin. Also if we
* detected in the wakeup from idle path that the tick
* broadcast device expired for us, we don't want to go deep
* idle as we know that the IPI is going to arrive right away.
*/
if (cpu_idle_force_poll || tick_check_broadcast_expired())
cpu_idle_poll();
else
cpuidle_idle_call();
arch_cpu_idle_exit();
}
/*
* Since we fell out of the loop above, we know TIF_NEED_RESCHED must
* be set, propagate it into PREEMPT_NEED_RESCHED.
*
* This is required because for polling idle loops we will not have had
* an IPI to fold the state for us.
*/
preempt_set_need_resched();
tick_nohz_idle_exit();
__current_clr_polling();
/*
* We promise to call sched_ttwu_pending() and reschedule if
* need_resched() is set while polling is set. That means that clearing
* polling needs to be visible before doing these things.
*/
smp_mb__after_atomic();
sched_ttwu_pending();
schedule_preempt_disabled();
}
static void iseries_dedicated_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
if (!need_resched()) {
while (!need_resched()) {
ppc64_runlatch_off();
HMT_low();
if (hvlpevent_is_pending()) {
HMT_medium();
ppc64_runlatch_on();
process_iSeries_events();
}
}
HMT_medium();
}
ppc64_runlatch_on();
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
}
}
static void iseries_shared_idle(void)
{
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched() && !hvlpevent_is_pending()) {
local_irq_disable();
ppc64_runlatch_off();
/* Recheck with irqs off */
if (!need_resched() && !hvlpevent_is_pending())
yield_shared_processor();
HMT_medium();
local_irq_enable();
}
ppc64_runlatch_on();
rcu_idle_exit();
tick_nohz_idle_exit();
if (hvlpevent_is_pending())
process_iSeries_events();
schedule_preempt_disabled();
}
}
/*
* The body of the idle task.
*/
void cpu_idle(void)
{
if (ppc_md.idle_loop)
ppc_md.idle_loop(); /* doesn't return */
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched() && !cpu_should_die()) {
ppc64_runlatch_off();
if (ppc_md.power_save) {
clear_thread_flag(TIF_POLLING_NRFLAG);
/*
* smp_mb is so clearing of TIF_POLLING_NRFLAG
* is ordered w.r.t. need_resched() test.
*/
smp_mb();
local_irq_disable();
/* Don't trace irqs off for idle */
stop_critical_timings();
/* check again after disabling irqs */
if (!need_resched() && !cpu_should_die())
ppc_md.power_save();
start_critical_timings();
/* Some power_save functions return with
* interrupts enabled, some don't.
*/
if (irqs_disabled())
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
} else {
/*
* Go into low thread priority and possibly
* low power mode.
*/
HMT_low();
HMT_very_low();
}
}
HMT_medium();
ppc64_runlatch_on();
rcu_idle_exit();
tick_nohz_idle_exit();
if (cpu_should_die()) {
sched_preempt_enable_no_resched();
cpu_die();
}
schedule_preempt_disabled();
}
}
static void wait_for_pinned_cpus(struct hotplug_pcp *hp)
{
set_current_state(TASK_UNINTERRUPTIBLE);
while (hp->refcount) {
schedule_preempt_disabled();
set_current_state(TASK_UNINTERRUPTIBLE);
}
}
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
while (1) {
while (!need_resched())
idle();
schedule_preempt_disabled();
}
}
/*
* Generic idle loop implementation
*
* Called with polling cleared.
*/
static void cpu_idle_loop(void)
{
while (1) {
/*
* If the arch has a polling bit, we maintain an invariant:
*
* Our polling bit is clear if we're not scheduled (i.e. if
* rq->curr != rq->idle). This means that, if rq->idle has
* the polling bit set, then setting need_resched is
* guaranteed to cause the cpu to reschedule.
*/
__current_set_polling();
tick_nohz_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
local_irq_disable();
arch_cpu_idle_enter();
/*
* In poll mode we reenable interrupts and spin.
*
* Also if we detected in the wakeup from idle
* path that the tick broadcast device expired
* for us, we don't want to go deep idle as we
* know that the IPI is going to arrive right
* away
*/
if (cpu_idle_force_poll ||
tick_check_broadcast_expired() ||
__get_cpu_var(idle_force_poll))
cpu_idle_poll();
else
cpuidle_idle_call();
arch_cpu_idle_exit();
}
tick_nohz_idle_exit();
__current_clr_polling();
/*
* We promise to reschedule if need_resched is set while
* polling is set. That means that clearing polling
* needs to be visible before rescheduling.
*/
smp_mb__after_atomic();
schedule_preempt_disabled();
if (cpu_is_offline(smp_processor_id()))
arch_cpu_idle_dead();
}
}
/*
* Generic idle loop implementation
*/
static void cpu_idle_loop(void)
{
while (1) {
tick_nohz_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
if (cpu_is_offline(smp_processor_id()))
arch_cpu_idle_dead();
local_irq_disable();
arch_cpu_idle_enter();
/*
* In poll mode we reenable interrupts and spin.
*
* Also if we detected in the wakeup from idle
* path that the tick broadcast device expired
* for us, we don't want to go deep idle as we
* know that the IPI is going to arrive right
* away
*/
if (cpu_idle_force_poll || tick_check_broadcast_expired()) {
cpu_idle_poll();
} else {
if (!current_clr_polling_and_test()) {
stop_critical_timings();
rcu_idle_enter();
arch_cpu_idle();
WARN_ON_ONCE(irqs_disabled());
rcu_idle_exit();
start_critical_timings();
} else {
local_irq_enable();
}
__current_set_polling();
}
arch_cpu_idle_exit();
}
/*
* Since we fell out of the loop above, we know
* TIF_NEED_RESCHED must be set, propagate it into
* PREEMPT_NEED_RESCHED.
*
* This is required because for polling idle loops we will
* not have had an IPI to fold the state for us.
*/
preempt_set_need_resched();
tick_nohz_idle_exit();
schedule_preempt_disabled();
}
}
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched())
barrier();
<<<<<<< HEAD
schedule_preempt_disabled();
=======
<<<<<<< HEAD
void cpu_idle(void)
{
local_irq_enable();
/* endless idle loop with no priority at all */
while (1) {
rcu_idle_enter();
while (!need_resched())
platform_idle();
rcu_idle_exit();
schedule_preempt_disabled();
}
}
void cpu_idle (void)
{
while (1) {
while (!need_resched()) {
void (*idle)(void);
idle = pm_idle;
if (!idle)
idle = default_idle;
idle();
}
schedule_preempt_disabled();
}
}
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
rcu_idle_enter();
while (!need_resched())
barrier();
rcu_idle_exit();
schedule_preempt_disabled();
check_pgt_cache();
}
}
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle (void)
{
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched()) {
void (*idle)(void) = pm_idle;
if (!idle)
idle = default_idle;
idle();
}
schedule_preempt_disabled();
}
}
void cpu_idle(void)
{
if (ppc_md.idle_loop)
ppc_md.idle_loop();
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched() && !cpu_should_die()) {
ppc64_runlatch_off();
if (ppc_md.power_save) {
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb();
local_irq_disable();
stop_critical_timings();
if (!need_resched() && !cpu_should_die())
ppc_md.power_save();
start_critical_timings();
if (irqs_disabled())
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
} else {
HMT_low();
HMT_very_low();
}
}
HMT_medium();
ppc64_runlatch_on();
rcu_idle_exit();
tick_nohz_idle_exit();
if (cpu_should_die()) {
sched_preempt_enable_no_resched();
cpu_die();
}
schedule_preempt_disabled();
}
}
/*
* FIXME: Is this really correct under all circumstances ?
*/
static int sync_unplug_thread(void *data)
{
struct hotplug_pcp *hp = data;
preempt_disable();
hp->unplug = current;
set_current_state(TASK_UNINTERRUPTIBLE);
while (hp->refcount) {
schedule_preempt_disabled();
set_current_state(TASK_UNINTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
preempt_enable();
complete(&hp->synced);
return 0;
}
/*
* Generic idle loop implementation
*/
static void cpu_idle_loop(void)
{
while (1) {
tick_nohz_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
local_irq_disable();
arch_cpu_idle_enter();
/*
* In poll mode we reenable interrupts and spin.
*
* Also if we detected in the wakeup from idle
* path that the tick broadcast device expired
* for us, we don't want to go deep idle as we
* know that the IPI is going to arrive right
* away
*/
if (cpu_idle_force_poll ||
tick_check_broadcast_expired() ||
__get_cpu_var(idle_force_poll)) {
cpu_idle_poll();
} else {
if (!current_clr_polling_and_test()) {
stop_critical_timings();
rcu_idle_enter();
arch_cpu_idle();
WARN_ON_ONCE(irqs_disabled());
rcu_idle_exit();
start_critical_timings();
} else {
local_irq_enable();
}
__current_set_polling();
}
arch_cpu_idle_exit();
}
tick_nohz_idle_exit();
schedule_preempt_disabled();
if (cpu_is_offline(smp_processor_id()))
arch_cpu_idle_dead();
}
}
void cpu_idle (void)
{
/* endless idle loop with no priority at all */
while (1) {
rcu_idle_enter();
while (!need_resched()) {
/*
* Mark this as an RCU critical section so that
* synchronize_kernel() in the unload path waits
* for our completion.
*/
default_idle();
}
rcu_idle_exit();
schedule_preempt_disabled();
}
}
void
cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
/* FIXME -- EV6 and LCA45 know how to power down
the CPU. */
rcu_idle_enter();
while (!need_resched())
cpu_relax();
rcu_idle_exit();
schedule_preempt_disabled();
}
}
/*
* the idle loop on a Sparc... ;)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
for (;;) {
if (ARCH_SUN4C) {
static int count = HZ;
static unsigned long last_jiffies;
static unsigned long last_faults;
static unsigned long fps;
unsigned long now;
unsigned long faults;
extern unsigned long sun4c_kernel_faults;
extern void sun4c_grow_kernel_ring(void);
local_irq_disable();
now = jiffies;
count -= (now - last_jiffies);
last_jiffies = now;
if (count < 0) {
count += HZ;
faults = sun4c_kernel_faults;
fps = (fps + (faults - last_faults)) >> 1;
last_faults = faults;
#if 0
printk("kernel faults / second = %ld\n", fps);
#endif
if (fps >= SUN4C_FAULT_HIGH) {
sun4c_grow_kernel_ring();
}
}
local_irq_enable();
}
if (pm_idle) {
while (!need_resched())
(*pm_idle)();
} else {
while (!need_resched())
cpu_relax();
}
schedule_preempt_disabled();
check_pgt_cache();
}
/*
* The idle thread, has rather strange semantics for calling pm_idle,
* but this is what x86 does and we need to do the same, so that
* things like cpuidle get called in the same way. The only difference
* is that we always respect 'hlt_counter' to prevent low power idle.
*/
void cpu_idle(void)
{
local_fiq_enable();
/* endless idle loop with no priority at all */
while (1) {
idle_notifier_call_chain(IDLE_START);
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched()) {
/*
* We need to disable interrupts here
* to ensure we don't miss a wakeup call.
*/
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
#endif
if (hlt_counter) {
local_irq_enable();
cpu_relax();
} else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
pm_idle();
start_critical_timings();
/*
* pm_idle functions must always
* return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
} else
local_irq_enable();
}
rcu_idle_exit();
tick_nohz_idle_exit();
idle_notifier_call_chain(IDLE_END);
schedule_preempt_disabled();
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
cpu_die();
#endif
}
}
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
int cpu = smp_processor_id();
current_thread_info()->status |= TS_POLLING;
if (no_idle_nap) {
while (1) {
while (!need_resched())
cpu_relax();
schedule();
}
}
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched()) {
if (cpu_is_offline(cpu))
BUG(); /* no HOTPLUG_CPU */
local_irq_disable();
__get_cpu_var(irq_stat).idle_timestamp = jiffies;
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we
* test NEED_RESCHED:
*/
smp_mb();
if (!need_resched())
_cpu_idle();
else
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
}
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
}
}
void cpu_idle(void)
{
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
void (*idle)(void) = pm_idle;
if (!idle)
idle = default_idle;
tick_nohz_stop_sched_tick(1);
while (!need_resched())
idle();
tick_nohz_restart_sched_tick();
schedule_preempt_disabled();
check_pgt_cache();
}
}
/*
* The idle thread. We try to conserve power, while trying to keep
* overall latency low. The architecture specific idle is passed
* a value to indicate the level of "idleness" of the system.
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
void (*idle)(void) = pm_idle;
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
cpu_die();
#endif
if (!idle)
idle = default_idle;
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched())
idle();
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
}
}
/*
* the idle thread
* - there's no useful work to be done, so just try to conserve power and have
* a low exit latency (ie sit in a loop waiting for somebody to say that
* they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
for (;;) {
while (!need_resched()) {
void (*idle)(void);
smp_rmb();
idle = pm_idle;
if (!idle) {
#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU)
idle = poll_idle;
#else /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */
idle = default_idle;
#endif /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */
}
idle();
}
schedule_preempt_disabled();
}
}
/*
* The idle thread. There's no useful work to be done, so just try to conserve
* power and have a low exit latency (ie sit in a loop waiting for somebody to
* say that they'd like to reschedule)
*/
void cpu_idle(void)
{
unsigned int cpu = smp_processor_id();
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
if (cpu_is_offline(cpu))
play_dead();
local_irq_disable();
/* Don't trace irqs off for idle */
stop_critical_timings();
if (cpuidle_idle_call())
sh_idle();
/*
* Sanity check to ensure that sh_idle() returns
* with IRQs enabled
*/
WARN_ON(irqs_disabled());
start_critical_timings();
}
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
}
}
/*
* The idle thread. There's no useful work to be done, so just try to conserve
* power and have a low exit latency (ie sit in a loop waiting for somebody to
* say that they'd like to reschedule)
*/
void __noreturn cpu_idle(void)
{
int cpu;
/* CPU is going idle. */
cpu = smp_processor_id();
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
while (!need_resched() && cpu_online(cpu)) {
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
smtc_idle_loop_hook();
#endif
if (cpu_wait) {
/* Don't trace irqs off for idle */
stop_critical_timings();
(*cpu_wait)();
start_critical_timings();
}
}
#ifdef CONFIG_HOTPLUG_CPU
if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
(system_state == SYSTEM_RUNNING ||
system_state == SYSTEM_BOOTING))
play_dead();
#endif
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
}
}
void cpu_idle(void)
{
for (;;) {
rcu_idle_enter();
while (!need_resched()) {
void (*idle)(void);
smp_rmb();
idle = pm_idle;
if (!idle) {
#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU)
idle = poll_idle;
#else
idle = default_idle;
#endif
}
idle();
}
rcu_idle_exit();
schedule_preempt_disabled();
}
}
/*
* Generic idle loop implementation
*
* Called with polling cleared.
*/
static void cpu_idle_loop(void)
{
while (1) {
/*
* If the arch has a polling bit, we maintain an invariant:
*
* Our polling bit is clear if we're not scheduled (i.e. if
* rq->curr != rq->idle). This means that, if rq->idle has
* the polling bit set, then setting need_resched is
* guaranteed to cause the cpu to reschedule.
*/
__current_set_polling();
tick_nohz_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
if (cpu_is_offline(smp_processor_id()))
arch_cpu_idle_dead();
local_irq_disable();
arch_cpu_idle_enter();
/*
* In poll mode we reenable interrupts and spin.
*
* Also if we detected in the wakeup from idle
* path that the tick broadcast device expired
* for us, we don't want to go deep idle as we
* know that the IPI is going to arrive right
* away
*/
if (cpu_idle_force_poll || tick_check_broadcast_expired())
cpu_idle_poll();
else
cpuidle_idle_call();
arch_cpu_idle_exit();
/*
* We need to test and propagate the TIF_NEED_RESCHED
* bit here because we might not have send the
* reschedule IPI to idle tasks.
*/
if (tif_need_resched())
set_preempt_need_resched();
}
tick_nohz_idle_exit();
__current_clr_polling();
/*
* We promise to call sched_ttwu_pending and reschedule
* if need_resched is set while polling is set. That
* means that clearing polling needs to be visible
* before doing these things.
*/
smp_mb();
sched_ttwu_pending();
schedule_preempt_disabled();
}
}
/*
* Lock a mutex (possibly interruptible), slowpath:
*/
static inline int __sched
__mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
struct lockdep_map *nest_lock, unsigned long ip)
{
struct task_struct *task = current;
struct mutex_waiter waiter;
unsigned long flags;
preempt_disable();
mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip);
#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
/*
* Optimistic spinning.
*
* We try to spin for acquisition when we find that there are no
* pending waiters and the lock owner is currently running on a
* (different) CPU.
*
* The rationale is that if the lock owner is running, it is likely to
* release the lock soon.
*
* Since this needs the lock owner, and this mutex implementation
* doesn't track the owner atomically in the lock field, we need to
* track it non-atomically.
*
* We can't do this for DEBUG_MUTEXES because that relies on wait_lock
* to serialize everything.
*
* The mutex spinners are queued up using MCS lock so that only one
* spinner can compete for the mutex. However, if mutex spinning isn't
* going to happen, there is no point in going through the lock/unlock
* overhead.
*/
if (!mutex_can_spin_on_owner(lock))
goto slowpath;
for (;;) {
struct task_struct *owner;
struct mspin_node node;
/*
* If there's an owner, wait for it to either
* release the lock or go to sleep.
*/
mspin_lock(MLOCK(lock), &node);
owner = ACCESS_ONCE(lock->owner);
if (owner && !mutex_spin_on_owner(lock, owner)) {
mspin_unlock(MLOCK(lock), &node);
break;
}
if ((atomic_read(&lock->count) == 1) &&
(atomic_cmpxchg(&lock->count, 1, 0) == 1)) {
lock_acquired(&lock->dep_map, ip);
mutex_set_owner(lock);
mspin_unlock(MLOCK(lock), &node);
preempt_enable();
return 0;
}
mspin_unlock(MLOCK(lock), &node);
/*
* When there's no owner, we might have preempted between the
* owner acquiring the lock and setting the owner field. If
* we're an RT task that will live-lock because we won't let
* the owner complete.
*/
if (!owner && (need_resched() || rt_task(task)))
break;
/*
* The cpu_relax() call is a compiler barrier which forces
* everything in this loop to be re-loaded. We don't need
* memory barriers as we'll eventually observe the right
* values at the cost of a few extra spins.
*/
arch_mutex_cpu_relax();
}
slowpath:
#endif
spin_lock_mutex(&lock->wait_lock, flags);
debug_mutex_lock_common(lock, &waiter);
debug_mutex_add_waiter(lock, &waiter, task_thread_info(task));
/* add waiting tasks to the end of the waitqueue (FIFO): */
list_add_tail(&waiter.list, &lock->wait_list);
waiter.task = task;
if (MUTEX_SHOW_NO_WAITER(lock) && (atomic_xchg(&lock->count, -1) == 1))
goto done;
lock_contended(&lock->dep_map, ip);
for (;;) {
/*
* Lets try to take the lock again - this is needed even if
* we get here for the first time (shortly after failing to
* acquire the lock), to make sure that we get a wakeup once
* it's unlocked. Later on, if we sleep, this is the
* operation that gives us the lock. We xchg it to -1, so
* that when we release the lock, we properly wake up the
* other waiters:
*/
if (MUTEX_SHOW_NO_WAITER(lock) &&
(atomic_xchg(&lock->count, -1) == 1))
break;
/*
* got a signal? (This code gets eliminated in the
* TASK_UNINTERRUPTIBLE case.)
*/
if (unlikely(signal_pending_state(state, task))) {
mutex_remove_waiter(lock, &waiter,
task_thread_info(task));
mutex_release(&lock->dep_map, 1, ip);
spin_unlock_mutex(&lock->wait_lock, flags);
debug_mutex_free_waiter(&waiter);
preempt_enable();
return -EINTR;
}
__set_task_state(task, state);
/* didn't get the lock, go to sleep: */
spin_unlock_mutex(&lock->wait_lock, flags);
schedule_preempt_disabled();
spin_lock_mutex(&lock->wait_lock, flags);
}
done:
lock_acquired(&lock->dep_map, ip);
/* got the lock - rejoice! */
mutex_remove_waiter(lock, &waiter, current_thread_info());
mutex_set_owner(lock);
/* set it to 0 if there are no waiters left: */
if (likely(list_empty(&lock->wait_list)))
atomic_set(&lock->count, 0);
spin_unlock_mutex(&lock->wait_lock, flags);
debug_mutex_free_waiter(&waiter);
preempt_enable();
return 0;
}
/*
* Generic idle loop implementation
*
* Called with polling cleared.
*/
static void cpu_idle_loop(void)
{
while (1) {
/*
* If the arch has a polling bit, we maintain an invariant:
*
* Our polling bit is clear if we're not scheduled (i.e. if
* rq->curr != rq->idle). This means that, if rq->idle has
* the polling bit set, then setting need_resched is
* guaranteed to cause the cpu to reschedule.
*/
__current_set_polling();
quiet_vmstat();
tick_nohz_idle_enter();
while (!need_resched()) {
check_pgt_cache();
rmb();
if (cpu_is_offline(smp_processor_id())) {
rcu_cpu_notify(NULL, CPU_DYING_IDLE,
(void *)(long)smp_processor_id());
smp_mb(); /* all activity before dead. */
this_cpu_write(cpu_dead_idle, true);
arch_cpu_idle_dead();
}
local_irq_disable();
arch_cpu_idle_enter();
/*
* In poll mode we reenable interrupts and spin.
*
* Also if we detected in the wakeup from idle
* path that the tick broadcast device expired
* for us, we don't want to go deep idle as we
* know that the IPI is going to arrive right
* away
*/
if (cpu_idle_force_poll || tick_check_broadcast_expired())
cpu_idle_poll();
else
cpuidle_idle_call();
arch_cpu_idle_exit();
}
/*
* Since we fell out of the loop above, we know
* TIF_NEED_RESCHED must be set, propagate it into
* PREEMPT_NEED_RESCHED.
*
* This is required because for polling idle loops we will
* not have had an IPI to fold the state for us.
*/
preempt_set_need_resched();
tick_nohz_idle_exit();
__current_clr_polling();
/*
* We promise to call sched_ttwu_pending and reschedule
* if need_resched is set while polling is set. That
* means that clearing polling needs to be visible
* before doing these things.
*/
smp_mb__after_atomic();
sched_ttwu_pending();
schedule_preempt_disabled();
}
}
