pnoutrefresh(WINDOW *win,
int pminrow,
int pmincol,
int sminrow,
int smincol,
int smaxrow,
int smaxcol)
{
NCURSES_SIZE_T i, j;
NCURSES_SIZE_T m, n;
NCURSES_SIZE_T pmaxrow;
NCURSES_SIZE_T pmaxcol;
SCREEN *sp;
#if USE_SCROLL_HINTS
const int my_len = 2; /* parameterize the threshold for hardscroll */
NCURSES_SIZE_T displaced;
bool wide;
#endif
T((T_CALLED("pnoutrefresh(%p, %d, %d, %d, %d, %d, %d)"),
(void *) win, pminrow, pmincol, sminrow, smincol, smaxrow, smaxcol));
if (win == 0)
returnCode(ERR);
if (!(win->_flags & _ISPAD))
returnCode(ERR);
sp = _nc_screen_of(win);
/* negative values are interpreted as zero */
if (pminrow < 0)
pminrow = 0;
if (pmincol < 0)
pmincol = 0;
if (sminrow < 0)
sminrow = 0;
if (smincol < 0)
smincol = 0;
pmaxrow = pminrow + smaxrow - sminrow;
pmaxcol = pmincol + smaxcol - smincol;
T((" pminrow + smaxrow - sminrow %ld, win->_maxy %ld",
(long) pmaxrow, (long) win->_maxy));
T((" pmincol + smaxcol - smincol %ld, win->_maxx %ld",
(long) pmaxcol, (long) win->_maxx));
/*
* Trim the caller's screen size back to the actual limits.
*/
if (pmaxrow > win->_maxy) {
smaxrow -= (pmaxrow - win->_maxy);
pmaxrow = pminrow + smaxrow - sminrow;
}
if (pmaxcol > win->_maxx) {
smaxcol -= (pmaxcol - win->_maxx);
pmaxcol = pmincol + smaxcol - smincol;
}
if (smaxrow >= screen_lines(sp)
|| smaxcol >= screen_columns(sp)
|| sminrow > smaxrow
|| smincol > smaxcol)
returnCode(ERR);
T(("pad being refreshed"));
#if USE_SCROLL_HINTS
if (win->_pad._pad_y >= 0) {
displaced = pminrow - win->_pad._pad_y
- (sminrow - win->_pad._pad_top);
T(("pad being shifted by %d line(s)", displaced));
} else
displaced = 0;
#endif
/*
* For pure efficiency, we'd want to transfer scrolling information
* from the pad to newscr whenever the window is wide enough that
* its update will dominate the cost of the update for the horizontal
* band of newscr that it occupies. Unfortunately, this threshold
* tends to be complex to estimate, and in any case scrolling the
* whole band and rewriting the parts outside win's image would look
* really ugly. So. What we do is consider the pad "wide" if it
* either (a) occupies the whole width of newscr, or (b) occupies
* all but at most one column on either vertical edge of the screen
* (this caters to fussy people who put boxes around full-screen
* windows). Note that changing this formula will not break any code,
* merely change the costs of various update cases.
*/
#if USE_SCROLL_HINTS
wide = (smincol < my_len && smaxcol > (NewScreen(sp)->_maxx - my_len));
#endif
for (i = pminrow, m = sminrow + win->_yoffset;
i <= pmaxrow && m <= NewScreen(sp)->_maxy;
i++, m++) {
register struct ldat *nline = &NewScreen(sp)->_line[m];
register struct ldat *oline = &win->_line[i];
for (j = pmincol, n = smincol; j <= pmaxcol; j++, n++) {
NCURSES_CH_T ch = oline->text[j];
#if USE_WIDEC_SUPPORT
/*
* Special case for leftmost character of the displayed area.
* Only half of a double-width character may be visible.
*/
if (j == pmincol
&& j > 0
&& isWidecExt(ch)) {
SetChar(ch, L(' '), AttrOf(oline->text[j - 1]));
}
#endif
if (!CharEq(ch, nline->text[n])) {
nline->text[n] = ch;
CHANGED_CELL(nline, n);
}
}
#if USE_SCROLL_HINTS
if (wide) {
int nind = m + displaced;
if (oline->oldindex < 0
|| nind < sminrow
|| nind > smaxrow) {
nind = _NEWINDEX;
} else if (displaced) {
register struct ldat *pline = &CurScreen(sp)->_line[nind];
for (j = 0; j <= my_len; j++) {
int k = NewScreen(sp)->_maxx - j;
if (pline->text[j] != nline->text[j]
|| pline->text[k] != nline->text[k]) {
nind = _NEWINDEX;
break;
}
}
}
nline->oldindex = nind;
}
#endif /* USE_SCROLL_HINTS */
oline->firstchar = oline->lastchar = _NOCHANGE;
if_USE_SCROLL_HINTS(oline->oldindex = i);
}
/*
* Clean up debris from scrolling or resizing the pad, so we do not
* accidentally pick up the index value during the next call to this
* procedure. The only rows that should have an index value are those
* that are displayed during this cycle.
*/
#if USE_SCROLL_HINTS
for (i = pminrow - 1; (i >= 0) && (win->_line[i].oldindex >= 0); i--)
win->_line[i].oldindex = _NEWINDEX;
for (i = pmaxrow + 1; (i <= win->_maxy)
&& (win->_line[i].oldindex >= 0); i++)
win->_line[i].oldindex = _NEWINDEX;
#endif
win->_begx = smincol;
win->_begy = sminrow;
if (win->_clear) {
win->_clear = FALSE;
NewScreen(sp)->_clear = TRUE;
}
/*
* Use the pad's current position, if it will be visible.
* If not, don't do anything; it's not an error.
*/
if (win->_leaveok == FALSE
&& win->_cury >= pminrow
&& win->_curx >= pmincol
&& win->_cury <= pmaxrow
&& win->_curx <= pmaxcol) {
NewScreen(sp)->_cury = win->_cury - pminrow + win->_begy + win->_yoffset;
NewScreen(sp)->_curx = win->_curx - pmincol + win->_begx;
}
NewScreen(sp)->_leaveok = win->_leaveok;
win->_flags &= ~_HASMOVED;
/*
* Update our cache of the line-numbers that we displayed from the pad.
* We will use this on subsequent calls to this function to derive
* values to stuff into 'oldindex[]' -- for scrolling optimization.
*/
win->_pad._pad_y = pminrow;
win->_pad._pad_x = pmincol;
win->_pad._pad_top = sminrow;
win->_pad._pad_left = smincol;
win->_pad._pad_bottom = smaxrow;
win->_pad._pad_right = smaxcol;
returnCode(OK);
}
extern int main(int argc, char **argv)
#endif
{
struct termios mode;
enum output_type output_type;
int optc;
int require_set_attr;
int speed_was_set;
int verbose_output;
int recoverable_output;
int k;
int noargs = 1;
char * file_name = NULL;
int fd;
const char *device_name;
output_type = changed;
verbose_output = 0;
recoverable_output = 0;
/* Don't print error messages for unrecognized options. */
opterr = 0;
while ((optc = getopt(argc, argv, "agF:")) != -1) {
switch (optc) {
case 'a':
verbose_output = 1;
output_type = all;
break;
case 'g':
recoverable_output = 1;
output_type = recoverable;
break;
case 'F':
if (file_name)
error_msg_and_die("only one device may be specified");
file_name = optarg;
break;
default: /* unrecognized option */
noargs = 0;
break;
}
if (noargs == 0)
break;
}
if (optind < argc)
noargs = 0;
/* Specifying both -a and -g gets an error. */
if (verbose_output && recoverable_output)
error_msg_and_die ("verbose and stty-readable output styles are mutually exclusive");
/* Specifying any other arguments with -a or -g gets an error. */
if (!noargs && (verbose_output || recoverable_output))
error_msg_and_die ("modes may not be set when specifying an output style");
/* FIXME: it'd be better not to open the file until we've verified
that all arguments are valid. Otherwise, we could end up doing
only some of the requested operations and then failing, probably
leaving things in an undesirable state. */
if (file_name) {
int fdflags;
device_name = file_name;
fd = open(device_name, O_RDONLY | O_NONBLOCK);
if (fd < 0)
perror_msg_and_die("%s", device_name);
if ((fdflags = fcntl(fd, F_GETFL)) == -1
|| fcntl(fd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
perror_msg_and_die("%s: couldn't reset non-blocking mode",
device_name);
} else {
fd = 0;
device_name = "standard input";
}
/* Initialize to all zeroes so there is no risk memcmp will report a
spurious difference in an uninitialized portion of the structure. */
memset(&mode, 0, sizeof(mode));
if (tcgetattr(fd, &mode))
perror_msg_and_die("%s", device_name);
if (verbose_output || recoverable_output || noargs) {
max_col = screen_columns();
current_col = 0;
display_settings(output_type, &mode, fd, device_name);
return EXIT_SUCCESS;
}
speed_was_set = 0;
require_set_attr = 0;
k = 0;
while (++k < argc) {
int match_found = 0;
int reversed = 0;
int i;
if (argv[k][0] == '-') {
char *find_dev_opt;
++argv[k];
/* Handle "-a", "-ag", "-aF/dev/foo", "-aF /dev/foo", etc.
Find the options that have been parsed. This is really
gross, but it's needed because stty SETTINGS look like options to
getopt(), so we need to work around things in a really horrible
way. If any new options are ever added to stty, the short option
MUST NOT be a letter which is the first letter of one of the
possible stty settings.
*/
find_dev_opt = strchr(argv[k], 'F'); /* find -*F* */
if(find_dev_opt) {
if(find_dev_opt[1]==0) /* -*F /dev/foo */
k++; /* skip /dev/foo */
continue; /* else -*F/dev/foo - no skip */
}
if(argv[k][0]=='a' || argv[k][0]=='g')
continue;
/* Is not options - is reverse params */
reversed = 1;
}
for (i = 0; i < NUM_mode_info; ++i)
if (STREQ(argv[k], mode_info[i].name)) {
match_found = set_mode(&mode_info[i], reversed, &mode);
require_set_attr = 1;
break;
}
if (match_found == 0 && reversed)
error_msg_and_die("invalid argument `%s'", --argv[k]);
if (match_found == 0)
for (i = 0; i < NUM_control_info; ++i)
if (STREQ(argv[k], control_info[i].name)) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
match_found = 1;
++k;
set_control_char(&control_info[i], argv[k], &mode);
require_set_attr = 1;
break;
}
if (match_found == 0) {
if (STREQ(argv[k], "ispeed")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_speed(input_speed, argv[k], &mode);
speed_was_set = 1;
require_set_attr = 1;
} else if (STREQ(argv[k], "ospeed")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_speed(output_speed, argv[k], &mode);
speed_was_set = 1;
require_set_attr = 1;
}
#ifdef TIOCGWINSZ
else if (STREQ(argv[k], "rows")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_window_size((int) parse_number(argv[k], stty_suffixes),
-1, fd, device_name);
} else if (STREQ(argv[k], "cols") || STREQ(argv[k], "columns")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_window_size(-1,
(int) parse_number(argv[k], stty_suffixes),
fd, device_name);
} else if (STREQ(argv[k], "size")) {
max_col = screen_columns();
current_col = 0;
display_window_size(0, fd, device_name);
}
#endif
#ifdef HAVE_C_LINE
else if (STREQ(argv[k], "line")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
mode.c_line = parse_number(argv[k], stty_suffixes);
require_set_attr = 1;
}
#endif
else if (STREQ(argv[k], "speed")) {
max_col = screen_columns();
display_speed(&mode, 0);
} else if (recover_mode(argv[k], &mode) == 1)
require_set_attr = 1;
else if (string_to_baud(argv[k]) != (speed_t) - 1) {
set_speed(both_speeds, argv[k], &mode);
speed_was_set = 1;
require_set_attr = 1;
} else
error_msg_and_die("invalid argument `%s'", argv[k]);
}
}
if (require_set_attr) {
struct termios new_mode;
if (tcsetattr(fd, TCSADRAIN, &mode))
perror_msg_and_die("%s", device_name);
/* POSIX (according to Zlotnick's book) tcsetattr returns zero if
it performs *any* of the requested operations. This means it
can report `success' when it has actually failed to perform
some proper subset of the requested operations. To detect
this partial failure, get the current terminal attributes and
compare them to the requested ones. */
/* Initialize to all zeroes so there is no risk memcmp will report a
spurious difference in an uninitialized portion of the structure. */
memset(&new_mode, 0, sizeof(new_mode));
if (tcgetattr(fd, &new_mode))
perror_msg_and_die("%s", device_name);
/* Normally, one shouldn't use memcmp to compare structures that
may have `holes' containing uninitialized data, but we have been
careful to initialize the storage of these two variables to all
zeroes. One might think it more efficient simply to compare the
modified fields, but that would require enumerating those fields --
and not all systems have the same fields in this structure. */
if (memcmp(&mode, &new_mode, sizeof(mode)) != 0) {
#ifdef CIBAUD
/* SunOS 4.1.3 (at least) has the problem that after this sequence,
tcgetattr (&m1); tcsetattr (&m1); tcgetattr (&m2);
sometimes (m1 != m2). The only difference is in the four bits
of the c_cflag field corresponding to the baud rate. To save
Sun users a little confusion, don't report an error if this
happens. But suppress the error only if we haven't tried to
set the baud rate explicitly -- otherwise we'd never give an
error for a true failure to set the baud rate. */
new_mode.c_cflag &= (~CIBAUD);
if (speed_was_set || memcmp(&mode, &new_mode, sizeof(mode)) != 0)
#endif
error_msg_and_die ("%s: unable to perform all requested operations",
device_name);
}
}
return EXIT_SUCCESS;
}