int main(int argc, char** argv) {
// Bail out early if we don't have the right argument
// count, and try to tell the user not to run us
// if stderr happens to be hooked up to a terminal
if(argc != 5) {
fprintf(stderr, "This binary is not for human execution!\n");
exit(99);
}
bool debug = false;
if(!strcmp(argv[1], "Y"))
debug = true;
bool use_syslog = false;
if(!strcmp(argv[2], "S"))
use_syslog = true;
dmn_init1(debug, true, use_syslog, "gdnsd_extmon_helper");
// Note that gdnsd_initialize() would be standard here, but extmon_helper
// is special: it doesn't actually make use of most of libgdnsd, just the
// very basic compiler, allocator, and libdmn logging bits.
// regardless, we seal off stdin now. We don't need it,
// and this way we don't have to deal with it when
// execv()-ing child commands later.
if(!freopen("/dev/null", "r", stdin))
dmn_log_fatal("Cannot open /dev/null: %s", dmn_logf_strerror(errno));
// Also unconditionally unset NOTIFY_SOCKET here so that children
// don't get any ideas about talking to systemd on our behalf.
// (we're done using it in this process for libdmn stuff at this point)
unsetenv("NOTIFY_SOCKET");
// these are the main communication pipes to the daemon/plugin
plugin_read_fd = atoi(argv[3]);
plugin_write_fd = atoi(argv[4]);
if(plugin_read_fd < 3 || plugin_read_fd > 1000
|| plugin_write_fd < 3 || plugin_write_fd > 1000)
log_fatal("Invalid pipe descriptors!");
if(emc_read_exact(plugin_read_fd, "HELO"))
log_fatal("Failed to read HELO from plugin");
if(emc_write_string(plugin_write_fd, "HELO_ACK", 8))
log_fatal("Failed to write HELO_ACK to plugin");
uint8_t ccount_buf[7];
if(emc_read_nbytes(plugin_read_fd, 7, ccount_buf)
|| strncmp((char*)ccount_buf, "CMDS:", 5))
log_fatal("Failed to read command count from plugin");
num_mons = ((unsigned)ccount_buf[5] << 8) + ccount_buf[6];
if(!num_mons)
log_fatal("Received command count of zero from plugin");
mons = xcalloc(num_mons, sizeof(mon_t));
if(emc_write_string(plugin_write_fd, "CMDS_ACK", 8))
log_fatal("Failed to write CMDS_ACK to plugin");
// Note, it's merely a happy coincidence that our mons[]
// indices exactly match cmd->idx numbers. Always use
// the cmd->idx numbers as the official index when talking
// to the main daemon!
for(unsigned i = 0; i < num_mons; i++) {
mons[i].cmd = emc_read_command(plugin_read_fd);
if(!mons[i].cmd)
log_fatal("Failed to read command %u from plugin", i);
if(i != mons[i].cmd->idx)
log_fatal("BUG: plugin index issues, %u vs %u", i, mons[i].cmd->idx);
if(emc_write_string(plugin_write_fd, "CMD_ACK", 7))
log_fatal("Failed to write CMD_ACK for command %u to plugin", i);
}
if(emc_read_exact(plugin_read_fd, "END_CMDS"))
log_fatal("Failed to read END_CMDS from plugin");
if(emc_write_string(plugin_write_fd, "END_CMDS_ACK", 12))
log_fatal("Failed to write END_CMDS_ACK to plugin");
// done with the serial setup, close the readpipe and go nonblocking on write for eventloop...
close(plugin_read_fd);
if(fcntl(plugin_write_fd, F_SETFL, (fcntl(plugin_write_fd, F_GETFL, 0)) | O_NONBLOCK) == -1)
log_fatal("Failed to set O_NONBLOCK on pipe: %s", dmn_logf_errno());
// CLOEXEC the write fd so child scripts can't mess with it
if(fcntl(plugin_write_fd, F_SETFD, FD_CLOEXEC))
log_fatal("Failed to set FD_CLOEXEC on plugin write fd: %s", dmn_logf_strerror(errno));
// init results-sending queue
sendq_init();
// Set up libev error callback
ev_set_syserr_cb(&syserr_for_ev);
// Construct the default loop for the main thread
struct ev_loop* def_loop = ev_default_loop(EVFLAG_AUTO);
if(!def_loop) log_fatal("Could not initialize the default libev loop");
// Catch SIGINT/TERM/HUP, and do not let them prevent loop exit
sigterm_watcher = xmalloc(sizeof(ev_signal));
sigint_watcher = xmalloc(sizeof(ev_signal));
sighup_watcher = xmalloc(sizeof(ev_signal));
ev_signal_init(sigterm_watcher, sig_cb, SIGTERM);
ev_signal_init(sigint_watcher, sig_cb, SIGINT);
ev_signal_init(sighup_watcher, sig_cb, SIGHUP);
ev_signal_start(def_loop, sigterm_watcher);
ev_signal_start(def_loop, sigint_watcher);
ev_signal_start(def_loop, sighup_watcher);
ev_unref(def_loop);
ev_unref(def_loop);
ev_unref(def_loop);
// set up primary read/write watchers on the pipe to the daemon's plugin
plugin_write_watcher = xmalloc(sizeof(ev_io));
ev_io_init(plugin_write_watcher, plugin_write_cb, plugin_write_fd, EV_WRITE);
ev_set_priority(plugin_write_watcher, 1);
// set up interval watchers for each monitor, initially for immediate firing
// for the daemon's monitoring init cycle, then repeating every interval.
for(unsigned i = 0; i < num_mons; i++) {
mon_t* this_mon = &mons[i];
this_mon->interval_timer = xmalloc(sizeof(ev_timer));
ev_timer_init(this_mon->interval_timer, mon_interval_cb, 0., this_mon->cmd->interval);
this_mon->interval_timer->data = this_mon;
ev_set_priority(this_mon->interval_timer, 0);
ev_timer_start(def_loop, this_mon->interval_timer);
// initialize the other watchers in the mon_t here as well,
// but do not start them (the interval callback starts them each interval)
this_mon->cmd_timeout = xmalloc(sizeof(ev_timer));
ev_timer_init(this_mon->cmd_timeout, mon_timeout_cb, 0, 0);
ev_set_priority(this_mon->cmd_timeout, -1);
this_mon->cmd_timeout->data = this_mon;
this_mon->child_watcher = xmalloc(sizeof(ev_child));
ev_child_init(this_mon->child_watcher, mon_child_cb, 0, 0);
this_mon->child_watcher->data = this_mon;
}
log_info("gdnsd_extmon_helper running");
ev_run(def_loop, 0);
// graceful shutdown should have cleared out children, but
// the hard kill/wait below is for (a) ungraceful shutdown
// on unexpected pipe close and (b) anything else going wrong
// during graceful shutdown.
bool needs_wait = false;
for(unsigned i = 0; i < num_mons; i++) {
if(mons[i].cmd_pid) {
log_debug("not-so-graceful shutdown: sending SIGKILL to %li", (long)mons[i].cmd_pid);
kill(mons[i].cmd_pid, SIGKILL);
needs_wait = true;
}
}
if(needs_wait) {
unsigned i = 500; // 5s for OS to give us all the SIGKILL'd zombies
while(i--) {
pid_t wprv = waitpid(-1, NULL, WNOHANG);
if(wprv < 0) {
if(errno == ECHILD)
break;
else
log_fatal("waitpid(-1, NULL, WNOHANG) failed: %s", dmn_logf_errno());
}
if(wprv)
log_debug("not-so-graceful shutdown: waitpid reaped %li", (long)wprv);
const struct timespec ms_10 = { 0, 10000000 };
nanosleep(&ms_10, NULL);
}
}
// Bye!
if(killed_by) {
log_info("gdnsd_extmon_helper exiting gracefully due to signal %i", killed_by);
#ifdef COVERTEST_EXIT
exit(0);
#else
raise(killed_by);
#endif
}
else {
log_info("gdnsd_extmon_helper exiting un-gracefully");
exit(42);
}
}
int main(int argc, char** argv) {
dmn_init_log("gdnsd_extmon_helper", true);
// start up syslog IFF it appears the daemon
// was *not* started via "startfg". Regular
// start/restart would have /dev/null'd the
// standard descriptors before forking us off.
if(!isatty(0))
dmn_start_syslog();
// Bail out early if we don't have the right argument
// count, and try to tell the user not to run us
// if stderr happens to be hooked up to a terminal
if(argc != 5) {
fprintf(stderr, "This binary is not for human execution!\n");
abort();
}
// open stderr logging connection using passed fd
dmn_log_set_alt_stderr(atoi(argv[2]));
// regardless, we seal off stdin now. We don't need it,
// and this way we don't have to deal with it when
// execv()-ing child commands later.
if(!freopen("/dev/null", "r", stdin))
dmn_log_fatal("Cannot open /dev/null: %s", dmn_strerror(errno));
if(!strcmp(argv[1], "Y"))
dmn_set_debug(true);
else if(!strcmp(argv[1], "N"))
dmn_set_debug(false);
else
log_fatal("Invalid debug argument on cmdline: '%s'!", argv[1]);
// these are the main communication pipes to the daemon/plugin
plugin_read_fd = atoi(argv[3]);
plugin_write_fd = atoi(argv[4]);
if(plugin_read_fd < 3 || plugin_read_fd > 1000
|| plugin_write_fd < 3 || plugin_write_fd > 1000)
log_fatal("Invalid pipe descriptors!");
// CLOEXEC the direct lines to the main plugin/daemon,
// so that child scripts can't screw with them.
if(fcntl(plugin_read_fd, F_SETFD, FD_CLOEXEC))
log_fatal("Failed to set FD_CLOEXEC on plugin read fd: %s", dmn_strerror(errno));
if(fcntl(plugin_write_fd, F_SETFD, FD_CLOEXEC))
log_fatal("Failed to set FD_CLOEXEC on plugin write fd: %s", dmn_strerror(errno));
if(emc_read_exact(plugin_read_fd, "HELO"))
log_fatal("Failed to read HELO from plugin");
if(emc_write_string(plugin_write_fd, "HELO_ACK", 8))
log_fatal("Failed to write HELO_ACK to plugin");
uint8_t ccount_buf[7];
if(emc_read_nbytes(plugin_read_fd, 7, ccount_buf)
|| strncmp((char*)ccount_buf, "CMDS:", 5))
log_fatal("Failed to read command count from plugin");
num_mons = ((unsigned)ccount_buf[5] << 8) + ccount_buf[6];
if(!num_mons)
log_fatal("Received command count of zero from plugin");
mons = calloc(num_mons, sizeof(mon_t));
if(emc_write_string(plugin_write_fd, "CMDS_ACK", 8))
log_fatal("Failed to write CMDS_ACK to plugin");
// Note, it's merely a happy coincidence that our mons[]
// indices exactly match cmd->idx numbers. Always use
// the cmd->idx numbers as the official index when talking
// to the main daemon!
for(unsigned i = 0; i < num_mons; i++) {
mons[i].cmd = emc_read_command(plugin_read_fd);
if(!mons[i].cmd)
log_fatal("Failed to read command %u from plugin", i);
if(i != mons[i].cmd->idx)
log_fatal("BUG: plugin index issues, %u vs %u", i, mons[i].cmd->idx);
if(emc_write_string(plugin_write_fd, "CMD_ACK", 7))
log_fatal("Failed to write CMD_ACK for command %u to plugin", i);
}
if(emc_read_exact(plugin_read_fd, "END_CMDS"))
log_fatal("Failed to read END_CMDS from plugin");
if(emc_write_string(plugin_write_fd, "END_CMDS_ACK", 12))
log_fatal("Failed to write END_CMDS_ACK to plugin");
// done with the serial setup, close the readpipe and go nonblocking on write for eventloop...
close(plugin_read_fd);
if(unlikely(fcntl(plugin_write_fd, F_SETFL, (fcntl(plugin_write_fd, F_GETFL, 0)) | O_NONBLOCK) == -1))
log_fatal("Failed to set O_NONBLOCK on pipe: %s", logf_errno());
// init results-sending queue
sendq_init();
// Set up libev error callback
ev_set_syserr_cb(&syserr_for_ev);
// Construct the default loop for the main thread
struct ev_loop* def_loop = ev_default_loop(EVFLAG_AUTO);
if(!def_loop) log_fatal("Could not initialize the default libev loop");
ev_set_timeout_collect_interval(def_loop, 0.1);
ev_set_io_collect_interval(def_loop, 0.01);
// set up primary read/write watchers on the pipe to the daemon's plugin
plugin_read_watcher = malloc(sizeof(ev_io));
plugin_write_watcher = malloc(sizeof(ev_io));
ev_io_init(plugin_write_watcher, plugin_write_cb, plugin_write_fd, EV_WRITE);
ev_set_priority(plugin_write_watcher, 1);
// set up interval watchers for each monitor, initially for immediate firing
// for the daemon's monitoring init cycle, then repeating every interval.
for(unsigned i = 0; i < num_mons; i++) {
mon_t* this_mon = &mons[i];
this_mon->interval_timer = malloc(sizeof(ev_timer));
ev_timer_init(this_mon->interval_timer, mon_interval_cb, 0., this_mon->cmd->interval);
this_mon->interval_timer->data = this_mon;
ev_set_priority(this_mon->interval_timer, 0);
ev_timer_start(def_loop, this_mon->interval_timer);
// initialize the other watchers in the mon_t here as well,
// but do not start them (the interval callback starts them each interval)
this_mon->cmd_timeout = malloc(sizeof(ev_timer));
ev_timer_init(this_mon->cmd_timeout, mon_timeout_cb, 0, 0);
ev_set_priority(this_mon->cmd_timeout, -1);
this_mon->cmd_timeout->data = this_mon;
this_mon->child_watcher = malloc(sizeof(ev_child));
ev_child_init(this_mon->child_watcher, mon_child_cb, 0, 0);
this_mon->child_watcher->data = this_mon;
}
log_info("gdnsd_extmon_helper running");
// shut off stderr output from here out...
dmn_log_close_alt_stderr();
ev_run(def_loop, 0);
log_info("gdnsd_extmon_helper terminating");
// kill -9 on any extant child procs
for(unsigned i = 0; i < num_mons; i++)
if(mons[i].cmd_pid)
kill(mons[i].cmd_pid, SIGKILL);
// Bye!
exit(0);
}