void ServerThread::run() {
server::BuiltinServer server;
#ifdef NDEBUG
logger::setLogLevel(logger::LOG_WARNING);
#else
logger::setLogLevel(logger::LOG_DEBUG);
#endif
connect(&server, SIGNAL(serverStopped()), this, SLOT(quit()));
logger::info() << "Starting server";
if(!server.start(_port)) {
_port = 0;
_error = server.errorString();
_starter.wakeOne();
return;
}
_port = server.port();
_starter.wakeOne();
exec();
logger::info() << "server thread exiting.";
if(_deleteonexit)
deleteLater();
}
void ServerThread::run() {
server::BuiltinServer server;
#ifdef NDEBUG
logger::setLogLevel(logger::LOG_WARNING);
#else
logger::setLogLevel(logger::LOG_DEBUG);
#endif
connect(&server, SIGNAL(serverStopped()), this, SLOT(quit()));
logger::info() << "Starting server";
if(!server.start(_port)) {
_port = 0;
_error = server.errorString();
_starter.wakeOne();
return;
}
_port = server.port();
_starter.wakeOne();
exec();
#ifdef HAVE_UPNP
if(_portForwarded) {
qDebug() << "Removing port" << _port << "forwarding";
UPnPClient::instance()->deactivateForward(_port);
}
#endif
logger::info() << "server thread exiting.";
if(_deleteonexit)
deleteLater();
}
void TcpServer::run() {
m_listening = true;
while (m_listening && m_open) {
//printf("TcpServer: spinning\n");
check_for_clients(); // new connections
check_for_messages(); // messages from clients
}
serverStopped();
m_listening = false;
}
/**
* Disconnect all clients and stop listening.
*/
void MultiServer::stop() {
if(_state == RUNNING) {
logger::info() << "Stopping server and kicking out" << _sessions->totalUsers() << "users...";
_state = STOPPING;
_server->close();
_sessions->stopAll();
}
if(_state == STOPPING) {
if(_sessions->totalUsers() == 0) {
_state = STOPPED;
logger::info() << "Server stopped.";
emit serverStopped();
}
}
}
/**
* Disconnect all clients and stop listening.
*/
void BuiltinServer::stop() {
if(_state == RUNNING) {
logger::debug() << "Stopping built-in server...";
_state = STOPPING;
_server->close();
_sessions->stopAll();
}
if(_state == STOPPING) {
if(_sessions->totalUsers() == 0) {
_state = STOPPED;
logger::debug() << "Built-in server stopped.";
emit serverStopped();
}
}
}
/**
* Disconnect all clients and stop listening.
*/
void BuiltinServer::stop() {
if(m_state == RUNNING) {
qDebug("Stopping built-in server...");
m_state = STOPPING;
m_server->close();
m_sessions->stopAll();
}
if(m_state == STOPPING) {
if(m_sessions->totalUsers() == 0) {
m_state = STOPPED;
qDebug("Built-in server stopped.");
emit serverStopped();
}
}
}
KCupsConnection::KCupsConnection(QObject *parent) :
QThread(parent),
m_inited(false),
// Creating the dialog before start() will make it run on the gui thread
m_passwordDialog(new KCupsPasswordDialog),
m_subscriptionId(-1)
{
// setup the DBus subscriptions
// Server related signals
// ServerStarted
notifierConnect(QLatin1String("ServerStarted"),
this,
SIGNAL(serverStarted(QString)));
// ServerStopped
notifierConnect(QLatin1String("ServerStopped"),
this,
SIGNAL(serverStopped(QString)));
// ServerRestarted
notifierConnect(QLatin1String("ServerRestarted"),
this,
SIGNAL(serverRestarted(QString)));
// ServerAudit
notifierConnect(QLatin1String("ServerAudit"),
this,
SIGNAL(serverAudit(QString)));
// Printer related signals
// PrinterAdded
notifierConnect(QLatin1String("PrinterAdded"),
this,
SIGNAL(printerAdded(QString,QString,QString,uint,QString,bool)));
// PrinterModified
notifierConnect(QLatin1String("PrinterModified"),
this,
SIGNAL(printerModified(QString,QString,QString,uint,QString,bool)));
// PrinterDeleted
notifierConnect(QLatin1String("PrinterDeleted"),
this,
SIGNAL(printerDeleted(QString,QString,QString,uint,QString,bool)));
// PrinterStateChanged
notifierConnect(QLatin1String("PrinterStateChanged"),
this,
SIGNAL(printerStateChanged(QString,QString,QString,uint,QString,bool)));
// PrinterStopped
notifierConnect(QLatin1String("PrinterStopped"),
this,
SIGNAL(printerStopped(QString,QString,QString,uint,QString,bool)));
// PrinterShutdown
notifierConnect(QLatin1String("PrinterShutdown"),
this,
SIGNAL(printerShutdown(QString,QString,QString,uint,QString,bool)));
// PrinterRestarted
notifierConnect(QLatin1String("PrinterRestarted"),
this,
SIGNAL(printerRestarted(QString,QString,QString,uint,QString,bool)));
// PrinterMediaChanged
notifierConnect(QLatin1String("PrinterMediaChanged"),
this,
SIGNAL(printerMediaChanged(QString,QString,QString,uint,QString,bool)));
// PrinterFinishingsChanged
notifierConnect(QLatin1String("PrinterFinishingsChanged"),
this,
SIGNAL(PrinterFinishingsChanged(QString,QString,QString,uint,QString,bool)));
// Job related signals
// JobState
notifierConnect(QLatin1String("JobState"),
this,
SIGNAL(jobState(QString,QString,QString,uint,QString,bool,uint,uint,QString,QString,uint)));
// JobCreated
notifierConnect(QLatin1String("JobCreated"),
this,
SIGNAL(jobCreated(QString,QString,QString,uint,QString,bool,uint,uint,QString,QString,uint)));
// JobStopped
notifierConnect(QLatin1String("JobStopped"),
this,
SIGNAL(jobStopped(QString,QString,QString,uint,QString,bool,uint,uint,QString,QString,uint)));
// JobConfigChanged
notifierConnect(QLatin1String("JobConfigChanged"),
this,
SIGNAL(jobConfigChanged(QString,QString,QString,uint,QString,bool,uint,uint,QString,QString,uint)));
// JobProgress
notifierConnect(QLatin1String("JobProgress"),
this,
SIGNAL(jobProgress(QString,QString,QString,uint,QString,bool,uint,uint,QString,QString,uint)));
// JobCompleted
notifierConnect(QLatin1String("JobCompleted"),
this,
SIGNAL(jobCompleted(QString,QString,QString,uint,QString,bool,uint,uint,QString,QString,uint)));
// This signal is needed since the cups registration thing
// doesn't emit printerAdded when we add a printer class
// This is emitted when a printer/queue is changed
QDBusConnection::systemBus().connect(QLatin1String(""),
QLatin1String("/com/redhat/PrinterSpooler"),
QLatin1String("com.redhat.PrinterSpooler"),
QLatin1String("PrinterAdded"),
this,
SIGNAL(rhPrinterAdded(QString)));
// This signal is needed since the cups registration thing
// sometimes simple stops working... don't ask me why
// This is emitted when a printer/queue is changed
QDBusConnection::systemBus().connect(QLatin1String(""),
QLatin1String("/com/redhat/PrinterSpooler"),
QLatin1String("com.redhat.PrinterSpooler"),
QLatin1String("QueueChanged"),
this,
SIGNAL(rhQueueChanged(QString)));
// This signal is needed since the cups registration thing
// doesn't emit printerRemoved when we add a printer class
// This is emitted when a printer/queue is changed
QDBusConnection::systemBus().connect(QLatin1String(""),
QLatin1String("/com/redhat/PrinterSpooler"),
QLatin1String("com.redhat.PrinterSpooler"),
QLatin1String("PrinterRemoved"),
this,
SIGNAL(rhPrinterRemoved(QString)));
QDBusConnection::systemBus().connect(QLatin1String(""),
QLatin1String("/com/redhat/PrinterSpooler"),
QLatin1String("com.redhat.PrinterSpooler"),
QLatin1String("JobQueuedLocal"),
this,
SIGNAL(rhJobQueuedLocal(QString,uint,QString)));
QDBusConnection::systemBus().connect(QLatin1String(""),
QLatin1String("/com/redhat/PrinterSpooler"),
QLatin1String("com.redhat.PrinterSpooler"),
QLatin1String("JobStartedLocal"),
this,
SIGNAL(rhJobStartedLocal(QString,uint,QString)));
// Starts this thread
start();
}
