int board_usb_init(int index, enum usb_init_type init)
{
struct exynos_usb3_phy *phy = (struct exynos_usb3_phy *)
samsung_get_base_usb3_phy();
if (!phy) {
error("usb3 phy not supported");
return -ENODEV;
}
set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN);
exynos5_usb3_phy_init(phy);
return dwc3_uboot_init(&dwc3_device_data);
}
static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy)
{
setbits_le32(&phy->phy_utmi,
PHYUTMI_OTGDISABLE |
PHYUTMI_FORCESUSPEND |
PHYUTMI_FORCESLEEP);
clrbits_le32(&phy->phy_clk_rst,
PHYCLKRST_REF_SSP_EN |
PHYCLKRST_SSC_EN |
PHYCLKRST_COMMONONN);
/* PHYTEST POWERDOWN Control to remove leakage current */
setbits_le32(&phy->phy_test,
PHYTEST_POWERDOWN_SSP |
PHYTEST_POWERDOWN_HSP);
/* disabling usb_drd phy */
set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE);
}
static void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy)
{
u32 reg;
/* enabling usb_drd phy */
set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN);
/* Reset USB 3.0 PHY */
writel(0x0, &phy->phy_reg0);
clrbits_le32(&phy->phy_param0,
/* Select PHY CLK source */
PHYPARAM0_REF_USE_PAD |
/* Set Loss-of-Signal Detector sensitivity */
PHYPARAM0_REF_LOSLEVEL_MASK);
setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL);
writel(0x0, &phy->phy_resume);
/*
* Setting the Frame length Adj value[6:1] to default 0x20
* See xHCI 1.0 spec, 5.2.4
*/
setbits_le32(&phy->link_system,
LINKSYSTEM_XHCI_VERSION_CONTROL |
LINKSYSTEM_FLADJ(0x20));
/* Set Tx De-Emphasis level */
clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK);
setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH);
setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL);
/* PHYTEST POWERDOWN Control */
clrbits_le32(&phy->phy_test,
PHYTEST_POWERDOWN_SSP |
PHYTEST_POWERDOWN_HSP);
/* UTMI Power Control */
writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi);
/* Use core clock from main PLL */
reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
/* Default 24Mhz crystal clock */
PHYCLKRST_FSEL(FSEL_CLKSEL_24M) |
PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
PHYCLKRST_SSC_REFCLKSEL(0x88) |
/* Force PortReset of PHY */
PHYCLKRST_PORTRESET |
/* Digital power supply in normal operating mode */
PHYCLKRST_RETENABLEN |
/* Enable ref clock for SS function */
PHYCLKRST_REF_SSP_EN |
/* Enable spread spectrum */
PHYCLKRST_SSC_EN |
/* Power down HS Bias and PLL blocks in suspend mode */
PHYCLKRST_COMMONONN;
writel(reg, &phy->phy_clk_rst);
/* giving time to Phy clock to settle before resetting */
udelay(10);
reg &= ~PHYCLKRST_PORTRESET;
writel(reg, &phy->phy_clk_rst);
}
