void PowerON_Reset_PC(void)
{
/* ==== VBR setting ==== */
set_vbr((void *)((char *)&INT_Vectors - INT_OFFSET));
/* ==== HardwareSetup Function ==== */
HardwareSetup(); /* Use Hardware Setup */
/* ==== B and D sections initialization ==== */
#ifdef COPY_SECTION_P
ProgCopy();
#endif
_INITSCT();
/* ==== Status Register setting ==== */
set_cr(SR_Init);
/* ==== Main function call ==== */
main();
/* ==== Sleep instruction execute ==== */
sleep();
}
void PowerON_Reset_PC(void)
{
set_vbr((void *)((_UBYTE *)&INT_Vectors - INT_OFFSET));
// HardwareSetup(); // Use Hardware Setup
_INITSCT();
// _CALL_INIT(); // Remove the comment when you use global class object
// _INIT_IOLIB(); // Enable I/O in the application(both SIM I/O and hardware I/O)
// errno=0; // Remove the comment when you use errno
// srand((_UINT)1); // Remove the comment when you use rand()
// _s1ptr=NULL; // Remove the comment when you use strtok()
set_cr(SR_Init);
main();
// _CLOSEALL(); // Close I/O in the application(both SIM I/O andhardware I/O)
// _CALL_END(); // Remove the comment when you use global class object
while(1);
}
void PowerON_Reset_PC(void)
{
char *p;
set_vbr(&INT_Vectors[-4]); // VBRの設定
set_fpscr(FPSCR_Init);
// _INITSCT(); // Rセクションの初期化(D→R)とBセクションのクリア (RAM上ロードのため未使用)
for (p = (char*)__sectop("B"); p < (char*)__secend("B"); p++) *p = 0; // Bセクションのクリア
// _CALL_INIT(); // Remove the comment when you use global class object
// _INIT_IOLIB(); // Enable I/O in the application(both SIM I/O and hardware I/O)
// errno=0; // Remove the comment when you use errno
// srand((_UINT)1); // Remove the comment when you use rand()
// _s1ptr=NULL; // Remove the comment when you use strtok()
// HardwareSetup(); // Use Hardware Setup
set_cr(SR_Init);
main();
// _CLOSEALL(); // Close I/O in the application(both SIM I/O andhardware I/O)
// _CALL_END(); // Remove the comment when you use global class object
sleep();
}
static void nvenc_setup_rate_control(AVCodecContext *avctx)
{
NVENCContext *ctx = avctx->priv_data;
NV_ENC_RC_PARAMS *rc = &ctx->config.rcParams;
if (avctx->bit_rate > 0)
rc->averageBitRate = avctx->bit_rate;
if (avctx->rc_max_rate > 0)
rc->maxBitRate = avctx->rc_max_rate;
if (ctx->rc > 0) {
nvenc_override_rate_control(avctx, rc);
} else if (avctx->global_quality > 0) {
set_constqp(avctx, rc);
} else if (avctx->qmin >= 0 && avctx->qmax >= 0) {
rc->rateControlMode = NV_ENC_PARAMS_RC_VBR;
set_vbr(avctx, rc);
}
if (avctx->rc_buffer_size > 0)
rc->vbvBufferSize = avctx->rc_buffer_size;
if (rc->averageBitRate > 0)
avctx->bit_rate = rc->averageBitRate;
}
/*****************************************************************************
* @name __initialize_hardware
*
* @brief: Called from startcf_cfv2.
*
* @param : None
*
* @return : None
*****************************************************************************
*
*
****************************************************************************/
void
__initialize_hardware(void)
{
/*******************************************************
* Out of reset, the low-level assembly code calls this
* routine to initialize the MCF52259 modules.
********************************************************/
asm
{
/* Initialize IPSBAR */
move.l #__IPSBAR,d0
andi.l #0xC0000000,d0 // need to mask
add.l #0x1,d0
move.l d0,0x40000000
/* Initialize FLASHBAR */
move.l #__FLASHBAR,d0
andi.l #0xFFF80000,d0 // need to mask
add.l #0x61,d0
movec d0,FLASHBAR
}
set_vbr(0);
}
void
DEFUN_VOID(_Board_Initialize)
{
mc68020_isr *monitors_vector_table;
int index;
monitors_vector_table = (mc68020_isr *)0; /* 135Bug Vectors are at 0 */
set_vbr( monitors_vector_table );
for ( index=2 ; index<=255 ; index++ )
M68Kvec[ index ] = monitors_vector_table[ 32 ];
M68Kvec[ 2 ] = monitors_vector_table[ 2 ]; /* bus error vector */
M68Kvec[ 4 ] = monitors_vector_table[ 4 ]; /* breakpoints vector */
M68Kvec[ 9 ] = monitors_vector_table[ 9 ]; /* trace vector */
M68Kvec[ 47 ] = monitors_vector_table[ 47 ]; /* system call vector */
set_vbr( &M68Kvec );
(*(unsigned char *)0xfffb0067) = 0x7f; /* make VME access round-robin */
enable_caching();
}
static void nvenc_override_rate_control(AVCodecContext *avctx,
NV_ENC_RC_PARAMS *rc)
{
NVENCContext *ctx = avctx->priv_data;
switch (ctx->rc) {
case NV_ENC_PARAMS_RC_CONSTQP:
if (avctx->global_quality < 0) {
av_log(avctx, AV_LOG_WARNING,
"The constant quality rate-control requires "
"the 'global_quality' option set.\n");
return;
}
set_constqp(avctx, rc);
return;
case NV_ENC_PARAMS_RC_2_PASS_VBR:
case NV_ENC_PARAMS_RC_VBR:
if (avctx->qmin < 0 && avctx->qmax < 0) {
av_log(avctx, AV_LOG_WARNING,
"The variable bitrate rate-control requires "
"the 'qmin' and/or 'qmax' option set.\n");
return;
}
case NV_ENC_PARAMS_RC_VBR_MINQP:
if (avctx->qmin < 0) {
av_log(avctx, AV_LOG_WARNING,
"The variable bitrate rate-control requires "
"the 'qmin' option set.\n");
return;
}
set_vbr(avctx, rc);
break;
case NV_ENC_PARAMS_RC_CBR:
break;
case NV_ENC_PARAMS_RC_2_PASS_QUALITY:
case NV_ENC_PARAMS_RC_2_PASS_FRAMESIZE_CAP:
if (!(ctx->flags & NVENC_LOWLATENCY)) {
av_log(avctx, AV_LOG_WARNING,
"The multipass rate-control requires "
"a low-latency preset.\n");
return;
}
}
rc->rateControlMode = ctx->rc;
}
/*
* called at boot time, configure all devices on the system.
*/
void
cpu_configure()
{
softintr_init();
if (config_rootfound("mainbus", "mainbus") == 0)
panic("no mainbus found");
/*
* Switch to our final trap vectors, and unmap the PROM data area.
*/
set_vbr(kernel_vbr);
pmap_unmap_firmware();
cold = 0;
/*
* Turn external interrupts on.
*/
set_psr(get_psr() & ~PSR_IND);
spl0();
}
