Beispiel #1
0
int flash_from_file(const char *filename, int raw) {
    int i, logic_pos, status = 0x200;
    unsigned char *block, *block_flash, *bad_block;
    float pct = 0.f;

    FILE *f = fopen(filename, "rb");
    if (!f) {
        printf("\nError: Failed to open file: %s\n", filename);
        return -1;
    }

    printf("\nFlashing from %s...\n", filename);
    printf("0x%x block's to write...\n", sfc.size_blocks);

    if (!f)
        return -1;

    if (raw == -1) /* auto */ {
        fseek(f, 0, SEEK_END);
        raw = detect_read_write_modus(ftell(f));
        if (raw == -1)
            return -1;
        fseek(f, 0, SEEK_SET);
    }

    block = (unsigned char*) malloc(sfc.block_sz_phys);
    block_flash = (unsigned char*) malloc(sfc.block_sz_phys);
    bad_block = (unsigned char*) malloc(sfc.block_sz_phys);

    unsigned nand_size = sfc.size_bytes;

    // Dump only 64mb on big nand
    if ((nand_size == NAND_SIZE_512MB) | (nand_size == NAND_SIZE_256MB)) {
        nand_size = NAND_SIZE_64MB;
    }

    for (i = 0; i < nand_size; i += sfc.block_sz) {
        memset(block, 0xFF, sizeof (block));
        if (!fread(block, 1, sfc.page_sz_phys * sfc.pages_in_block, f)) {
            printf("Error reading ...\r\n");
            return i;
        }


        pct = ((float) i / (float) (nand_size));
        App.SetProgressValue(pct);

        // printf("Writing block: 0x%x of 0x%x (%iMB/%iMB)\r\n", sfcx_address_to_block(i) +1 , sfc.size_blocks , (i + sfc.block_sz) >> 20, nand_size >> 20);

        //Check for bad block
        sfcx_writereg(SFCX_STATUS, sfcx_readreg(SFCX_STATUS));
        sfcx_writereg(SFCX_ADDRESS, i);
        sfcx_writereg(SFCX_COMMAND, raw ? PHY_PAGE_TO_BUF : LOG_PAGE_TO_BUF);
        // Wait Busy
        while ((status = sfcx_readreg(SFCX_STATUS)) & 1);

        if ((!raw)) {
            logic_pos = sfcx_readreg(SFCX_PHYSICAL);

            if (!(logic_pos & 0x04000000)) /* shouldn't happen, unless the existing image is broken. just assume the block is okay. */ {
                printf("Error: Uh, oh, don't know. Reading @ block %08x failed. logic_pos: %i\r\n", i, sfcx_address_to_block(logic_pos));
                logic_pos = i;
            }
            logic_pos &= 0x3fffe00;

            if (logic_pos != i) {
                printf("Relocating/moving bad block from position 0x%x to 0x%x\r\n", sfcx_address_to_block(i), sfcx_address_to_block(logic_pos));
            }
        } else if (status & 0x40) //Bad Block Management
        {
            printf("Bad block ...\r\n");
#if 0
            logic_pos = sfc.last_bad_block_pos * sfc.block_sz;
            sfc.last_bad_block_pos--;

            sfcx_set_blocknumber(block, sfcx_address_to_block(i));
            sfcx_calcecc((int*) block);

            if (logic_pos != i) {
                printf("Relocating/moving bad block from position 0x%x to 0x%x\n", sfcx_address_to_block(i), sfcx_address_to_block(logic_pos));
            }
#endif
        } else {
            logic_pos = i;
        }
#if 0
        if (sfc.last_bad_block_pos == sfcx_address_to_block(i)) {
            //We reach the the last entry bad block in reserved area
            printf("\nWriting only to last entry bad block in the reserved area.");
            break;
        }
#endif

        //Erase block in Nand
        sfcx_erase_block(logic_pos);

        //Write block to Nand
        sfcx_write_block(block, logic_pos);

    }

    printf("\nWrite done\n");

    fclose(f);
    free(block);
    free(block_flash);
    free(bad_block);

    if (App.Warning("Flashing is complete, reboot the console?") == TRUE) {
        xenon_smc_power_reboot();
    }

    return 0;
}
Beispiel #2
0
/**
* Allocate memory for a packet buffer for a given netbuf.
*
* @param buf the netbuf for which to allocate a packet buffer
* @param size the size of the packet buffer to allocate
* @return pointer to the allocated memory
* NULL if no memory could be allocated
*/
void writeNand(char* path)
{
  FILE *f;
  int i, reserved_blocks, nand_sz;
  unsigned char *buf;
  unsigned long fileLen;
        
  // If bigblock 256/512MB console, override NANDsize with 64MB
  nand_sz = sfc.size_bytes;
  if (nand_sz == NAND_SIZE_256MB || nand_sz == NAND_SIZE_256MB)
    nand_sz = NAND_SIZE_64MB; //Only 64MB dumps supported on Big Block consoles

  console_clrscr();
        
  //Open file
  f = fopen(path, "rb");

  if(f == NULL)
  {
     printf(" ! %s not found on device! Aborting write!\n", path);
     waitforexit();
  }
	
  printf("\nFile %s opened successfully!\n", path);
        
  //Get file length
  fseek(f, 0, SEEK_END);
  fileLen=ftell(f);
  fseek(f, 0, SEEK_SET);

  //Check for correct filesize
  if (fileLen == NAND_SIZE_16MB_RAW || fileLen == NAND_SIZE_64MB_RAW)
     printf("updflash.bin has a valid filesize.");
  else {
     printf(" ! Filesize of %s is unsupported!\n", path);
     waitforexit();
  }
        
  //Allocate memory to *buffer
  buf=(unsigned char *)malloc(fileLen);
  if (!buf)
  {
      printf("Memory error!\n");
      fclose(f);
      waitforexit();
  }

  //Read file contents into buffer
  printf("Please wait while reading file into buffer ... \n");
  fread(buf, 1, fileLen, f);
  fclose(f);
        
        
   printf("Deleting reserved bad block area !\n");
   reserved_blocks = sfc.size_blocks-sfc.size_usable_fs;
        
   for (i = reserved_blocks * sfc.block_sz; i < nand_sz; i += sfc.block_sz){
       sfcx_erase_block(i);
   }
        
   printf("Please wait while writing to NAND...\n");
   //Do what ever with buffer
   for (i = 0; i < sfc.size_bytes_phys; i += sfc.block_sz_phys) 
   {
	sfcx_erase_block(sfcx_rawaddress_to_block(i)*sfc.block_sz);
	sfcx_write_block(&buf[i], sfcx_rawaddress_to_block(i)*sfc.block_sz);
   }

   printf("\n");
   printf("Freeing memory buffer...\n");

    free(buf);

    printf("Flashing NAND finished. Power cycle the Xbox and boot into your fresh Image !\n");
    printf(" ! If you flashed a new SMC you have to replug the PSU !\n");
        
    waitforexit();
}