/* return the core-type instantiation # of the current core */
uint
si_coreunit(si_t *sih)
{
si_info_t *sii;
uint idx;
uint coreid;
uint coreunit;
uint i;
sii = SI_INFO(sih);
coreunit = 0;
idx = sii->curidx;
ASSERT(GOODREGS(sii->curmap));
coreid = si_coreid(sih);
/* count the cores of our type */
for (i = 0; i < idx; i++)
if (sii->common_info->coreid[i] == coreid)
coreunit++;
return (coreunit);
}
static bool
si_buscore_setup(si_info_t *sii, chipcregs_t *cc, uint bustype, uint32 savewin,
uint *origidx, void *regs)
{
bool pci, pcie;
uint i;
uint pciidx, pcieidx, pcirev, pcierev;
cc = si_setcoreidx(&sii->pub, SI_CC_IDX);
ASSERT((uintptr)cc);
/* get chipcommon rev */
sii->pub.ccrev = (int)si_corerev(&sii->pub);
/* get chipcommon chipstatus */
if (sii->pub.ccrev >= 11)
sii->pub.chipst = R_REG(sii->osh, &cc->chipstatus);
/* get chipcommon capabilites */
sii->pub.cccaps = R_REG(sii->osh, &cc->capabilities);
/* get pmu rev and caps */
if (sii->pub.cccaps & CC_CAP_PMU) {
sii->pub.pmucaps = R_REG(sii->osh, &cc->pmucapabilities);
sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
}
SI_MSG(("Chipc: rev %d, caps 0x%x, chipst 0x%x pmurev %d, pmucaps 0x%x\n",
sii->pub.ccrev, sii->pub.cccaps, sii->pub.chipst, sii->pub.pmurev,
sii->pub.pmucaps));
/* figure out bus/orignal core idx */
sii->pub.buscoretype = NODEV_CORE_ID;
sii->pub.buscorerev = NOREV;
sii->pub.buscoreidx = BADIDX;
pci = pcie = FALSE;
pcirev = pcierev = NOREV;
pciidx = pcieidx = BADIDX;
for (i = 0; i < sii->numcores; i++) {
uint cid, crev;
si_setcoreidx(&sii->pub, i);
cid = si_coreid(&sii->pub);
crev = si_corerev(&sii->pub);
/* Display cores found */
SI_MSG(("CORE[%d]: id 0x%x rev %d base 0x%x regs 0x%p\n",
i, cid, crev, sii->common_info->coresba[i], sii->common_info->regs[i]));
if (BUSTYPE(bustype) == PCI_BUS) {
if (cid == PCI_CORE_ID) {
pciidx = i;
pcirev = crev;
pci = TRUE;
} else if (cid == PCIE_CORE_ID) {
pcieidx = i;
pcierev = crev;
pcie = TRUE;
}
} else if ((BUSTYPE(bustype) == PCMCIA_BUS) &&
(cid == PCMCIA_CORE_ID)) {
sii->pub.buscorerev = crev;
sii->pub.buscoretype = cid;
sii->pub.buscoreidx = i;
}
else if (((BUSTYPE(bustype) == SDIO_BUS) ||
(BUSTYPE(bustype) == SPI_BUS)) &&
((cid == PCMCIA_CORE_ID) ||
(cid == SDIOD_CORE_ID))) {
sii->pub.buscorerev = crev;
sii->pub.buscoretype = cid;
sii->pub.buscoreidx = i;
}
/* find the core idx before entering this func. */
if ((savewin && (savewin == sii->common_info->coresba[i])) ||
(regs == sii->common_info->regs[i]))
*origidx = i;
}
SI_MSG(("Buscore id/type/rev %d/0x%x/%d\n", sii->pub.buscoreidx, sii->pub.buscoretype,
sii->pub.buscorerev));
if (BUSTYPE(sii->pub.bustype) == SI_BUS && (CHIPID(sii->pub.chip) == BCM4712_CHIP_ID) &&
(sii->pub.chippkg != BCM4712LARGE_PKG_ID) && (sii->pub.chiprev <= 3))
OR_REG(sii->osh, &cc->slow_clk_ctl, SCC_SS_XTAL);
/* Make sure any on-chip ARM is off (in case strapping is wrong), or downloaded code was
* already running.
*/
if ((BUSTYPE(bustype) == SDIO_BUS) || (BUSTYPE(bustype) == SPI_BUS)) {
if (si_setcore(&sii->pub, ARM7S_CORE_ID, 0) ||
si_setcore(&sii->pub, ARMCM3_CORE_ID, 0))
si_core_disable(&sii->pub, 0);
}
/* return to the original core */
si_setcoreidx(&sii->pub, *origidx);
return TRUE;
}
struct hnddma_pub *dma_attach(struct osl_info *osh, char *name, si_t *sih,
void *dmaregstx, void *dmaregsrx, uint ntxd,
uint nrxd, uint rxbufsize, int rxextheadroom,
uint nrxpost, uint rxoffset, uint *msg_level)
{
dma_info_t *di;
uint size;
/* allocate private info structure */
di = kzalloc(sizeof(dma_info_t), GFP_ATOMIC);
if (di == NULL) {
#ifdef BCMDBG
printf("dma_attach: out of memory\n");
#endif
return NULL;
}
di->msg_level = msg_level ? msg_level : &dma_msg_level;
/* old chips w/o sb is no longer supported */
ASSERT(sih != NULL);
di->dma64 = ((si_core_sflags(sih, 0, 0) & SISF_DMA64) == SISF_DMA64);
/* check arguments */
ASSERT(ISPOWEROF2(ntxd));
ASSERT(ISPOWEROF2(nrxd));
if (nrxd == 0)
ASSERT(dmaregsrx == NULL);
if (ntxd == 0)
ASSERT(dmaregstx == NULL);
/* init dma reg pointer */
ASSERT(ntxd <= D64MAXDD);
ASSERT(nrxd <= D64MAXDD);
di->d64txregs = (dma64regs_t *) dmaregstx;
di->d64rxregs = (dma64regs_t *) dmaregsrx;
di->hnddma.di_fn = (const di_fcn_t *)&dma64proc;
/* Default flags (which can be changed by the driver calling dma_ctrlflags
* before enable): For backwards compatibility both Rx Overflow Continue
* and Parity are DISABLED.
* supports it.
*/
di->hnddma.di_fn->ctrlflags(&di->hnddma, DMA_CTRL_ROC | DMA_CTRL_PEN,
0);
DMA_TRACE(("%s: dma_attach: %s osh %p flags 0x%x ntxd %d nrxd %d "
"rxbufsize %d rxextheadroom %d nrxpost %d rxoffset %d "
"dmaregstx %p dmaregsrx %p\n", name, "DMA64", osh,
di->hnddma.dmactrlflags, ntxd, nrxd, rxbufsize,
rxextheadroom, nrxpost, rxoffset, dmaregstx, dmaregsrx));
/* make a private copy of our callers name */
strncpy(di->name, name, MAXNAMEL);
di->name[MAXNAMEL - 1] = '\0';
di->osh = osh;
di->sih = sih;
/* save tunables */
di->ntxd = (u16) ntxd;
di->nrxd = (u16) nrxd;
/* the actual dma size doesn't include the extra headroom */
di->rxextrahdrroom =
(rxextheadroom == -1) ? BCMEXTRAHDROOM : rxextheadroom;
if (rxbufsize > BCMEXTRAHDROOM)
di->rxbufsize = (u16) (rxbufsize - di->rxextrahdrroom);
else
di->rxbufsize = (u16) rxbufsize;
di->nrxpost = (u16) nrxpost;
di->rxoffset = (u8) rxoffset;
/*
* figure out the DMA physical address offset for dd and data
* PCI/PCIE: they map silicon backplace address to zero based memory, need offset
* Other bus: use zero
* SI_BUS BIGENDIAN kludge: use sdram swapped region for data buffer, not descriptor
*/
di->ddoffsetlow = 0;
di->dataoffsetlow = 0;
/* for pci bus, add offset */
if (sih->bustype == PCI_BUS) {
/* pcie with DMA64 */
di->ddoffsetlow = 0;
di->ddoffsethigh = SI_PCIE_DMA_H32;
di->dataoffsetlow = di->ddoffsetlow;
di->dataoffsethigh = di->ddoffsethigh;
}
#if defined(__mips__) && defined(IL_BIGENDIAN)
di->dataoffsetlow = di->dataoffsetlow + SI_SDRAM_SWAPPED;
#endif /* defined(__mips__) && defined(IL_BIGENDIAN) */
/* WAR64450 : DMACtl.Addr ext fields are not supported in SDIOD core. */
if ((si_coreid(sih) == SDIOD_CORE_ID)
&& ((si_corerev(sih) > 0) && (si_corerev(sih) <= 2)))
di->addrext = 0;
else if ((si_coreid(sih) == I2S_CORE_ID) &&
((si_corerev(sih) == 0) || (si_corerev(sih) == 1)))
di->addrext = 0;
else
di->addrext = _dma_isaddrext(di);
/* does the descriptors need to be aligned and if yes, on 4K/8K or not */
di->aligndesc_4k = _dma_descriptor_align(di);
if (di->aligndesc_4k) {
di->dmadesc_align = D64RINGALIGN_BITS;
if ((ntxd < D64MAXDD / 2) && (nrxd < D64MAXDD / 2)) {
/* for smaller dd table, HW relax alignment reqmnt */
di->dmadesc_align = D64RINGALIGN_BITS - 1;
}
} else
di->dmadesc_align = 4; /* 16 byte alignment */
DMA_NONE(("DMA descriptor align_needed %d, align %d\n",
di->aligndesc_4k, di->dmadesc_align));
/* allocate tx packet pointer vector */
if (ntxd) {
size = ntxd * sizeof(void *);
di->txp = kzalloc(size, GFP_ATOMIC);
if (di->txp == NULL) {
DMA_ERROR(("%s: dma_attach: out of tx memory\n", di->name));
goto fail;
}
}
/* allocate rx packet pointer vector */
if (nrxd) {
size = nrxd * sizeof(void *);
di->rxp = kzalloc(size, GFP_ATOMIC);
if (di->rxp == NULL) {
DMA_ERROR(("%s: dma_attach: out of rx memory\n", di->name));
goto fail;
}
}
/* allocate transmit descriptor ring, only need ntxd descriptors but it must be aligned */
if (ntxd) {
if (!_dma_alloc(di, DMA_TX))
goto fail;
}
/* allocate receive descriptor ring, only need nrxd descriptors but it must be aligned */
if (nrxd) {
if (!_dma_alloc(di, DMA_RX))
goto fail;
}
if ((di->ddoffsetlow != 0) && !di->addrext) {
if (PHYSADDRLO(di->txdpa) > SI_PCI_DMA_SZ) {
DMA_ERROR(("%s: dma_attach: txdpa 0x%x: addrext not supported\n", di->name, (u32) PHYSADDRLO(di->txdpa)));
goto fail;
}
if (PHYSADDRLO(di->rxdpa) > SI_PCI_DMA_SZ) {
DMA_ERROR(("%s: dma_attach: rxdpa 0x%x: addrext not supported\n", di->name, (u32) PHYSADDRLO(di->rxdpa)));
goto fail;
}
}
DMA_TRACE(("ddoffsetlow 0x%x ddoffsethigh 0x%x dataoffsetlow 0x%x dataoffsethigh " "0x%x addrext %d\n", di->ddoffsetlow, di->ddoffsethigh, di->dataoffsetlow, di->dataoffsethigh, di->addrext));
/* allocate DMA mapping vectors */
if (DMASGLIST_ENAB) {
if (ntxd) {
size = ntxd * sizeof(hnddma_seg_map_t);
di->txp_dmah = kzalloc(size, GFP_ATOMIC);
if (di->txp_dmah == NULL)
goto fail;
}
if (nrxd) {
size = nrxd * sizeof(hnddma_seg_map_t);
di->rxp_dmah = kzalloc(size, GFP_ATOMIC);
if (di->rxp_dmah == NULL)
goto fail;
}
}
return (struct hnddma_pub *) di;
fail:
_dma_detach(di);
return NULL;
}
static bool
si_buscore_setup(si_info_t *sii, chipcregs_t *cc, uint bustype, uint32 savewin,
uint *origidx, void *regs)
{
bool pci, pcie, pcie_gen2 = FALSE;
uint i;
uint pciidx, pcieidx, pcirev, pcierev;
cc = si_setcoreidx(&sii->pub, SI_CC_IDX);
ASSERT((uintptr)cc);
/* get chipcommon rev */
sii->pub.ccrev = (int)si_corerev(&sii->pub);
/* get chipcommon chipstatus */
if (sii->pub.ccrev >= 11)
sii->pub.chipst = R_REG(sii->osh, &cc->chipstatus);
/* get chipcommon capabilites */
sii->pub.cccaps = R_REG(sii->osh, &cc->capabilities);
/* get chipcommon extended capabilities */
if (sii->pub.ccrev >= 35)
sii->pub.cccaps_ext = R_REG(sii->osh, &cc->capabilities_ext);
/* get pmu rev and caps */
if (sii->pub.cccaps & CC_CAP_PMU) {
sii->pub.pmucaps = R_REG(sii->osh, &cc->pmucapabilities);
sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
}
SI_MSG(("Chipc: rev %d, caps 0x%x, chipst 0x%x pmurev %d, pmucaps 0x%x\n",
sii->pub.ccrev, sii->pub.cccaps, sii->pub.chipst, sii->pub.pmurev,
sii->pub.pmucaps));
/* figure out bus/orignal core idx */
sii->pub.buscoretype = NODEV_CORE_ID;
sii->pub.buscorerev = (uint)NOREV;
sii->pub.buscoreidx = BADIDX;
pci = pcie = FALSE;
pcirev = pcierev = (uint)NOREV;
pciidx = pcieidx = BADIDX;
for (i = 0; i < sii->numcores; i++) {
uint cid, crev;
si_setcoreidx(&sii->pub, i);
cid = si_coreid(&sii->pub);
crev = si_corerev(&sii->pub);
/* Display cores found */
SI_VMSG(("CORE[%d]: id 0x%x rev %d base 0x%x regs 0x%p\n",
i, cid, crev, sii->coresba[i], sii->regs[i]));
if (BUSTYPE(bustype) == PCI_BUS) {
if (cid == PCI_CORE_ID) {
pciidx = i;
pcirev = crev;
pci = TRUE;
} else if ((cid == PCIE_CORE_ID) || (cid == PCIE2_CORE_ID)) {
pcieidx = i;
pcierev = crev;
pcie = TRUE;
if (cid == PCIE2_CORE_ID)
pcie_gen2 = TRUE;
}
} else if ((BUSTYPE(bustype) == PCMCIA_BUS) &&
(cid == PCMCIA_CORE_ID)) {
sii->pub.buscorerev = crev;
sii->pub.buscoretype = cid;
sii->pub.buscoreidx = i;
}
else if (((BUSTYPE(bustype) == SDIO_BUS) ||
(BUSTYPE(bustype) == SPI_BUS)) &&
((cid == PCMCIA_CORE_ID) ||
(cid == SDIOD_CORE_ID))) {
sii->pub.buscorerev = crev;
sii->pub.buscoretype = cid;
sii->pub.buscoreidx = i;
}
/* find the core idx before entering this func. */
if ((savewin && (savewin == sii->coresba[i])) ||
(regs == sii->regs[i]))
*origidx = i;
}
if (pci) {
sii->pub.buscoretype = PCI_CORE_ID;
sii->pub.buscorerev = pcirev;
sii->pub.buscoreidx = pciidx;
} else if (pcie) {
if (pcie_gen2)
sii->pub.buscoretype = PCIE2_C
static void *
chipattach(etc_info_t *etc, void *osh, void *regsva)
{
struct bcm4xxx *ch;
bcmenetregs_t *regs;
char name[16];
char *var;
uint boardflags, boardtype;
ET_TRACE(("et%d: chipattach: regsva 0x%lx\n", etc->unit, (ulong)regsva));
if ((ch = (struct bcm4xxx *)MALLOC(osh, sizeof(struct bcm4xxx))) == NULL) {
ET_ERROR(("et%d: chipattach: out of memory, malloced %d bytes\n", etc->unit,
MALLOCED(osh)));
return (NULL);
}
bzero((char *)ch, sizeof(struct bcm4xxx));
ch->etc = etc;
ch->et = etc->et;
ch->osh = osh;
/* store the pointer to the sw mib */
etc->mib = (void *)&ch->mib;
/* get si handle */
if ((ch->sih = si_attach(etc->deviceid, ch->osh, regsva, PCI_BUS, NULL, &ch->vars,
&ch->vars_size)) == NULL) {
ET_ERROR(("et%d: chipattach: si_attach error\n", etc->unit));
goto fail;
}
/* We used to have an assert here like:
* si_coreid(ch->sih) == ENET_CORE_ID
* but srom-less systems and simulators don't have a way to
* provide a default bar0window so we were relying on nvram
* variables. At some point we decided that we could do away
* with that since the wireless driver was simply doing a
* setcore in attach. So we need to do the same here for
* the ethernet.
*/
if ((regs = (bcmenetregs_t *)si_setcore(ch->sih, ENET_CORE_ID, etc->unit)) == NULL) {
ET_ERROR(("et%d: chipattach: Could not setcore to the ENET core\n", etc->unit));
goto fail;
}
ch->regs = regs;
etc->chip = ch->sih->chip;
etc->chiprev = ch->sih->chiprev;
etc->coreid = si_coreid(ch->sih);
etc->corerev = si_corerev(ch->sih);
etc->nicmode = !(ch->sih->bustype == SI_BUS);
etc->coreunit = si_coreunit(ch->sih);
etc->boardflags = getintvar(ch->vars, "boardflags");
etc->hwrxoff = HWRXOFF;
boardflags = etc->boardflags;
boardtype = ch->sih->boardtype;
/* Backplane clock ticks per microsecs: used by gptimer, intrecvlazy */
etc->bp_ticks_usec = si_clock(ch->sih) / 1000000;
/* get our local ether addr */
sprintf(name, "et%dmacaddr", etc->coreunit);
var = getvar(ch->vars, name);
if (var == NULL) {
ET_ERROR(("et%d: chipattach: NVRAM_GET(%s) not found\n", etc->unit, name));
goto fail;
}
bcm_ether_atoe(var, &etc->perm_etheraddr);
if (ETHER_ISNULLADDR(&etc->perm_etheraddr)) {
ET_ERROR(("et%d: chipattach: invalid format: %s=%s\n", etc->unit, name, var));
goto fail;
}
bcopy((char *)&etc->perm_etheraddr, (char *)&etc->cur_etheraddr, ETHER_ADDR_LEN);
/*
* Too much can go wrong in scanning MDC/MDIO playing "whos my phy?" .
* Instead, explicitly require the environment var "et<coreunit>phyaddr=<val>".
*/
/* get our phyaddr value */
sprintf(name, "et%dphyaddr", etc->coreunit);
var = getvar(ch->vars, name);
if (var == NULL) {
ET_ERROR(("et%d: chipattach: NVRAM_GET(%s) not found\n", etc->unit, name));
goto fail;
}
etc->phyaddr = bcm_atoi(var) & EPHY_MASK;
/* nvram says no phy is present */
if (etc->phyaddr == EPHY_NONE) {
ET_ERROR(("et%d: chipattach: phy not present\n", etc->unit));
goto fail;
}
/* get our mdc/mdio port number */
sprintf(name, "et%dmdcport", etc->coreunit);
var = getvar(ch->vars, name);
if (var == NULL) {
ET_ERROR(("et%d: chipattach: NVRAM_GET(%s) not found\n", etc->unit, name));
goto fail;
}
etc->mdcport = bcm_atoi(var);
/* configure pci core */
si_pci_setup(ch->sih, (1 << si_coreidx(ch->sih)));
/* reset the enet core */
chipreset(ch);
/* dma attach */
sprintf(name, "et%d", etc->coreunit);
if ((ch->di = dma_attach(osh, name, ch->sih,
(void *)®s->dmaregs.xmt, (void *)®s->dmaregs.rcv,
NTXD, NRXD, RXBUFSZ, -1, NRXBUFPOST, HWRXOFF,
&et_msg_level)) == NULL) {
ET_ERROR(("et%d: chipattach: dma_attach failed\n", etc->unit));
goto fail;
}
etc->txavail[TX_Q0] = (uint *)&ch->di->txavail;
/* set default sofware intmask */
ch->intmask = DEF_INTMASK;
/*
* For the 5222 dual phy shared mdio contortion, our phy is
* on someone elses mdio pins. This other enet enet
* may not yet be attached so we must defer the et_phyfind().
*/
/* if local phy: reset it once now */
if (etc->mdcport == etc->coreunit)
chipphyreset(ch, etc->phyaddr);
#ifdef ETROBO
/*
* Broadcom Robo ethernet switch.
*/
if ((boardflags & BFL_ENETROBO) &&
(etc->phyaddr == EPHY_NOREG)) {
/* Attach to the switch */
if (!(etc->robo = bcm_robo_attach(ch->sih, ch, ch->vars,
(miird_f)bcm47xx_et_chops.phyrd,
(miiwr_f)bcm47xx_et_chops.phywr))) {
ET_ERROR(("et%d: chipattach: robo_attach failed\n", etc->unit));
goto fail;
}
/* Enable the switch and set it to a known good state */
if (bcm_robo_enable_device(etc->robo)) {
ET_ERROR(("et%d: chipattach: robo_enable_device failed\n", etc->unit));
goto fail;
}
/* Configure the switch to do VLAN */
if ((boardflags & BFL_ENETVLAN) &&
bcm_robo_config_vlan(etc->robo, etc->perm_etheraddr.octet)) {
ET_ERROR(("et%d: chipattach: robo_config_vlan failed\n", etc->unit));
goto fail;
}
/* Enable switching/forwarding */
if (bcm_robo_enable_switch(etc->robo)) {
ET_ERROR(("et%d: chipattach: robo_enable_switch failed\n", etc->unit));
goto fail;
}
}
#endif /* ETROBO */
#ifdef ETADM
/*
* ADMtek ethernet switch.
*/
if (boardflags & BFL_ENETADM) {
/* Attach to the device */
if (!(ch->adm = adm_attach(ch->sih, ch->vars))) {
ET_ERROR(("et%d: chipattach: adm_attach failed\n", etc->unit));
goto fail;
}
/* Enable the external switch and set it to a known good state */
if (adm_enable_device(ch->adm)) {
ET_ERROR(("et%d: chipattach: adm_enable_device failed\n", etc->unit));
goto fail;
}
/* Configure the switch */
if ((boardflags & BFL_ENETVLAN) && adm_config_vlan(ch->adm)) {
ET_ERROR(("et%d: chipattach: adm_config_vlan failed\n", etc->unit));
goto fail;
}
}
#endif /* ETADM */
return ((void *)ch);
fail:
chipdetach(ch);
return (NULL);
}
