/***********************************************************************//**
* @brief Simulate event data
*
* This method runs the simulation. Results are not saved by this method.
* Invoke "save" to save the results.
***************************************************************************/
void ctobssim::run(void)
{
// Switch screen logging on in debug mode
if (logDebug()) {
log.cout(true);
}
// Get parameters
get_parameters();
// Write input parameters into logger
if (logTerse()) {
log_parameters();
log << std::endl;
}
// Special mode: if read ahead is specified we know that we called
// the execute() method, hence files are saved immediately and event
// lists are disposed afterwards.
if (read_ahead()) {
m_save_and_dispose = true;
}
// Determine the number of valid CTA observations, set energy dispersion flag
// for all CTA observations and save old values in save_edisp vector
int n_observations = 0;
std::vector<bool> save_edisp;
save_edisp.assign(m_obs.size(), false);
for (int i = 0; i < m_obs.size(); ++i) {
GCTAObservation* obs = dynamic_cast<GCTAObservation*>(m_obs[i]);
if (obs != NULL) {
save_edisp[i] = obs->response()->apply_edisp();
obs->response()->apply_edisp(m_apply_edisp);
n_observations++;
}
}
// If more than a single observation has been handled then make sure that
// an XML file will be used for storage
if (n_observations > 1) {
m_use_xml = true;
}
// Write execution mode into logger
if (logTerse()) {
log << std::endl;
log.header1("Execution mode");
log << gammalib::parformat("Event list management");
if (m_save_and_dispose) {
log << "Save and dispose (reduces memory needs)" << std::endl;
}
else {
log << "Keep events in memory" << std::endl;
}
log << gammalib::parformat("Output format");
if (m_use_xml) {
log << "Write Observation Definition XML file" << std::endl;
}
else {
log << "Write single event list FITS file" << std::endl;
}
}
// Write seed values into logger
if (logTerse()) {
log << std::endl;
log.header1("Seed values");
for (int i = 0; i < m_rans.size(); ++i) {
log << gammalib::parformat("Seed "+gammalib::str(i));
log << gammalib::str(m_rans[i].seed()) << std::endl;
}
}
// Write observation(s) into logger
if (logTerse()) {
log << std::endl;
if (m_obs.size() > 1) {
log.header1("Observations");
}
else {
log.header1("Observation");
}
log << m_obs << std::endl;
}
// Write header
if (logTerse()) {
log << std::endl;
if (m_obs.size() > 1) {
log.header1("Simulate observations");
}
else {
log.header1("Simulate observation");
}
}
// From here on the code can be parallelized if OpenMP support
// is enabled. The code in the following block corresponds to the
// code that will be executed in each thread
#pragma omp parallel
{
// Each thread will have it's own logger to avoid conflicts
GLog wrklog;
if (logDebug()) {
wrklog.cout(true);
}
// Allocate and initialize copies for multi-threading
GModels models(m_obs.models());
// Copy configuration from application logger to thread logger
wrklog.date(log.date());
wrklog.name(log.name());
// Set a big value to avoid flushing
wrklog.max_size(10000000);
// Loop over all observation in the container. If OpenMP support
// is enabled, this loop will be parallelized.
#pragma omp for
for (int i = 0; i < m_obs.size(); ++i) {
// Get pointer on CTA observation
GCTAObservation* obs = dynamic_cast<GCTAObservation*>(m_obs[i]);
// Continue only if observation is a CTA observation
if (obs != NULL) {
// Write header for observation
if (logTerse()) {
if (obs->name().length() > 1) {
wrklog.header3("Observation "+obs->name());
}
else {
wrklog.header3("Observation");
}
}
// Work on a clone of the CTA observation. This makes sure that
// any memory allocated for computing (for example a response
// cache) is properly de-allocated on exit of this run
GCTAObservation obs_clone = *obs;
// Save number of events before entering simulation
int events_before = obs_clone.events()->size();
// Simulate source events
simulate_source(&obs_clone, models, m_rans[i], &wrklog);
// Simulate source events
simulate_background(&obs_clone, models, m_rans[i], &wrklog);
// Dump simulation results
if (logNormal()) {
wrklog << gammalib::parformat("MC events");
wrklog << obs_clone.events()->size() - events_before;
wrklog << " (all models)";
wrklog << std::endl;
}
// Append the event list to the original observation
obs->events(*(obs_clone.events()));
// If requested, event lists are saved immediately
if (m_save_and_dispose) {
// Set event output file name. If multiple observations are
// handled, build the filename from prefix and observation
// index. Otherwise use the outfile parameter.
std::string outfile;
if (m_use_xml) {
m_prefix = (*this)["prefix"].string();
outfile = m_prefix + gammalib::str(i) + ".fits";
}
else {
outfile = (*this)["outevents"].filename();
}
// Store output file name in original observation
obs->eventfile(outfile);
// Save observation into FITS file. This is a critical zone
// to avoid multiple threads writing simultaneously
#pragma omp critical
{
obs_clone.save(outfile, clobber());
}
// Dispose events
obs->dispose_events();
}
// ... otherwise append the event list to the original observation
/*
else {
obs->events(*(obs_clone.events()));
}
*/
} // endif: CTA observation found
} // endfor: looped over observations
// At the end, the content of the thread logger is added to
// the application logger
#pragma omp critical (log)
{
log << wrklog;
}
} // end pragma omp parallel
// Restore energy dispersion flag for all CTA observations
for (int i = 0; i < m_obs.size(); ++i) {
GCTAObservation* obs = dynamic_cast<GCTAObservation*>(m_obs[i]);
if (obs != NULL) {
obs->response()->apply_edisp(save_edisp[i]);
}
}
// Return
return;
}
/***********************************************************************//**
* @brief Simulate event data
*
* This method runs the simulation. Results are not saved by this method.
* Invoke "save" to save the results.
***************************************************************************/
void ctobssim::run(void)
{
// Switch screen logging on in debug mode
if (logDebug()) {
log.cout(true);
}
// Get parameters
get_parameters();
// Write input parameters into logger
if (logTerse()) {
log_parameters();
log << std::endl;
}
// Write seed values into logger
if (logTerse()) {
log << std::endl;
log.header1("Seed values");
for (int i = 0; i < m_rans.size(); ++i) {
log << gammalib::parformat("Seed "+gammalib::str(i));
log << gammalib::str(m_rans[i].seed()) << std::endl;
}
}
// Write observation(s) into logger
if (logTerse()) {
log << std::endl;
if (m_obs.size() > 1) {
log.header1("Observations");
}
else {
log.header1("Observation");
}
log << m_obs << std::endl;
}
// Write header
if (logTerse()) {
log << std::endl;
if (m_obs.size() > 1) {
log.header1("Simulate observations");
}
else {
log.header1("Simulate observation");
}
}
// Initialise counters
int n_observations = 0;
// From here on the code can be parallelized if OpenMP support
// is enabled. The code in the following block corresponds to the
// code that will be executed in each thread
#pragma omp parallel
{
// Each thread will have it's own logger to avoid conflicts
GLog wrklog;
if (logDebug()) {
wrklog.cout(true);
}
// Copy configuration from application logger to thread logger
wrklog.date(log.date());
wrklog.name(log.name());
// Set a big value to avoid flushing
wrklog.max_size(10000000);
// Loop over all observation in the container. If OpenMP support
// is enabled, this looped will be parallelized.
#pragma omp for
for (int i = 0; i < m_obs.size(); ++i) {
// Get CTA observation
GCTAObservation* obs = dynamic_cast<GCTAObservation*>(m_obs[i]);
// Continue only if observation is a CTA observation
if (obs != NULL) {
// Write header for observation
if (logTerse()) {
if (obs->name().length() > 1) {
wrklog.header3("Observation "+obs->name());
}
else {
wrklog.header3("Observation");
}
}
// Increment counter
n_observations++;
// Save number of events before entering simulation
int events_before = obs->events()->size();
// Simulate source events
simulate_source(obs, m_obs.models(), m_rans[i], &wrklog);
// Simulate source events
simulate_background(obs, m_obs.models(), m_rans[i], &wrklog);
// Dump simulation results
if (logNormal()) {
wrklog << gammalib::parformat("MC events");
wrklog << obs->events()->size() - events_before;
wrklog << " (all models)";
wrklog << std::endl;
}
} // endif: CTA observation found
} // endfor: looped over observations
// At the end, the content of the thread logger is added to
// the application logger
#pragma omp critical (log)
{
log << wrklog;
}
} // end pragma omp parallel
// If more than a single observation has been handled then make sure that
// an XML file will be used for storage
if (n_observations > 1) {
m_use_xml = true;
}
// Return
return;
}
