static SMBCSRV *
SMBC_server_internal(TALLOC_CTX *ctx,
SMBCCTX *context,
bool connect_if_not_found,
const char *server,
uint16_t port,
const char *share,
char **pp_workgroup,
char **pp_username,
char **pp_password,
bool *in_cache)
{
SMBCSRV *srv=NULL;
char *workgroup = NULL;
struct cli_state *c = NULL;
const char *server_n = server;
int is_ipc = (share != NULL && strcmp(share, "IPC$") == 0);
uint32_t fs_attrs = 0;
const char *username_used;
NTSTATUS status;
char *newserver, *newshare;
int flags = 0;
struct smbXcli_tcon *tcon = NULL;
int signing_state = SMB_SIGNING_DEFAULT;
ZERO_STRUCT(c);
*in_cache = false;
if (server[0] == 0) {
errno = EPERM;
return NULL;
}
/* Look for a cached connection */
srv = SMBC_find_server(ctx, context, server, share,
pp_workgroup, pp_username, pp_password);
/*
* If we found a connection and we're only allowed one share per
* server...
*/
if (srv &&
share != NULL && *share != '\0' &&
smbc_getOptionOneSharePerServer(context)) {
/*
* ... then if there's no current connection to the share,
* connect to it. SMBC_find_server(), or rather the function
* pointed to by context->get_cached_srv_fn which
* was called by SMBC_find_server(), will have issued a tree
* disconnect if the requested share is not the same as the
* one that was already connected.
*/
/*
* Use srv->cli->desthost and srv->cli->share instead of
* server and share below to connect to the actual share,
* i.e., a normal share or a referred share from
* 'msdfs proxy' share.
*/
if (!cli_state_has_tcon(srv->cli)) {
/* Ensure we have accurate auth info */
SMBC_call_auth_fn(ctx, context,
smbXcli_conn_remote_name(srv->cli->conn),
srv->cli->share,
pp_workgroup,
pp_username,
pp_password);
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
cli_shutdown(srv->cli);
srv->cli = NULL;
smbc_getFunctionRemoveCachedServer(context)(context,
srv);
return NULL;
}
/*
* We don't need to renegotiate encryption
* here as the encryption context is not per
* tid.
*/
status = cli_tree_connect(srv->cli,
srv->cli->share,
"?????",
*pp_password,
strlen(*pp_password)+1);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
cli_shutdown(srv->cli);
srv->cli = NULL;
smbc_getFunctionRemoveCachedServer(context)(context,
srv);
srv = NULL;
}
/* Determine if this share supports case sensitivity */
if (is_ipc) {
DEBUG(4,
("IPC$ so ignore case sensitivity\n"));
status = NT_STATUS_OK;
} else {
status = cli_get_fs_attr_info(c, &fs_attrs);
}
if (!NT_STATUS_IS_OK(status)) {
DEBUG(4, ("Could not retrieve "
"case sensitivity flag: %s.\n",
nt_errstr(status)));
/*
* We can't determine the case sensitivity of
* the share. We have no choice but to use the
* user-specified case sensitivity setting.
*/
if (smbc_getOptionCaseSensitive(context)) {
cli_set_case_sensitive(c, True);
} else {
cli_set_case_sensitive(c, False);
}
} else if (!is_ipc) {
DEBUG(4,
("Case sensitive: %s\n",
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? "True"
: "False")));
cli_set_case_sensitive(
c,
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? True
: False));
}
/*
* Regenerate the dev value since it's based on both
* server and share
*/
if (srv) {
const char *remote_name =
smbXcli_conn_remote_name(srv->cli->conn);
srv->dev = (dev_t)(str_checksum(remote_name) ^
str_checksum(srv->cli->share));
}
}
}
/* If we have a connection... */
if (srv) {
/* ... then we're done here. Give 'em what they came for. */
*in_cache = true;
goto done;
}
/* If we're not asked to connect when a connection doesn't exist... */
if (! connect_if_not_found) {
/* ... then we're done here. */
return NULL;
}
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
return NULL;
}
DEBUG(4,("SMBC_server: server_n=[%s] server=[%s]\n", server_n, server));
DEBUG(4,(" -> server_n=[%s] server=[%s]\n", server_n, server));
status = NT_STATUS_UNSUCCESSFUL;
if (smbc_getOptionUseKerberos(context)) {
flags |= CLI_FULL_CONNECTION_USE_KERBEROS;
}
if (smbc_getOptionFallbackAfterKerberos(context)) {
flags |= CLI_FULL_CONNECTION_FALLBACK_AFTER_KERBEROS;
}
if (smbc_getOptionUseCCache(context)) {
flags |= CLI_FULL_CONNECTION_USE_CCACHE;
}
if (smbc_getOptionUseNTHash(context)) {
flags |= CLI_FULL_CONNECTION_USE_NT_HASH;
}
if (context->internal->smb_encryption_level != SMBC_ENCRYPTLEVEL_NONE) {
signing_state = SMB_SIGNING_REQUIRED;
}
if (port == 0) {
if (share == NULL || *share == '\0' || is_ipc) {
/*
* Try 139 first for IPC$
*/
status = cli_connect_nb(server_n, NULL, NBT_SMB_PORT, 0x20,
smbc_getNetbiosName(context),
signing_state, flags, &c);
}
}
if (!NT_STATUS_IS_OK(status)) {
/*
* No IPC$ or 139 did not work
*/
status = cli_connect_nb(server_n, NULL, port, 0x20,
smbc_getNetbiosName(context),
signing_state, flags, &c);
}
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
return NULL;
}
cli_set_timeout(c, smbc_getTimeout(context));
status = smbXcli_negprot(c->conn, c->timeout,
lp_client_min_protocol(),
lp_client_max_protocol());
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(c);
errno = ETIMEDOUT;
return NULL;
}
if (smbXcli_conn_protocol(c->conn) >= PROTOCOL_SMB2_02) {
/* Ensure we ask for some initial credits. */
smb2cli_conn_set_max_credits(c->conn, DEFAULT_SMB2_MAX_CREDITS);
}
username_used = *pp_username;
if (!NT_STATUS_IS_OK(cli_session_setup(c, username_used,
*pp_password,
strlen(*pp_password),
*pp_password,
strlen(*pp_password),
*pp_workgroup))) {
/* Failed. Try an anonymous login, if allowed by flags. */
username_used = "";
if (smbc_getOptionNoAutoAnonymousLogin(context) ||
!NT_STATUS_IS_OK(cli_session_setup(c, username_used,
*pp_password, 1,
*pp_password, 0,
*pp_workgroup))) {
cli_shutdown(c);
errno = EPERM;
return NULL;
}
}
DEBUG(4,(" session setup ok\n"));
/* here's the fun part....to support 'msdfs proxy' shares
(on Samba or windows) we have to issues a TRANS_GET_DFS_REFERRAL
here before trying to connect to the original share.
cli_check_msdfs_proxy() will fail if it is a normal share. */
if (smbXcli_conn_dfs_supported(c->conn) &&
cli_check_msdfs_proxy(ctx, c, share,
&newserver, &newshare,
/* FIXME: cli_check_msdfs_proxy() does
not support smbc_smb_encrypt_level type */
context->internal->smb_encryption_level ?
true : false,
*pp_username,
*pp_password,
*pp_workgroup)) {
cli_shutdown(c);
srv = SMBC_server_internal(ctx, context, connect_if_not_found,
newserver, port, newshare, pp_workgroup,
pp_username, pp_password, in_cache);
TALLOC_FREE(newserver);
TALLOC_FREE(newshare);
return srv;
}
/* must be a normal share */
status = cli_tree_connect(c, share, "?????", *pp_password,
strlen(*pp_password)+1);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
if (smbXcli_conn_protocol(c->conn) >= PROTOCOL_SMB2_02) {
tcon = c->smb2.tcon;
} else {
tcon = c->smb1.tcon;
}
/* Determine if this share supports case sensitivity */
if (is_ipc) {
DEBUG(4, ("IPC$ so ignore case sensitivity\n"));
status = NT_STATUS_OK;
} else {
status = cli_get_fs_attr_info(c, &fs_attrs);
}
if (!NT_STATUS_IS_OK(status)) {
DEBUG(4, ("Could not retrieve case sensitivity flag: %s.\n",
nt_errstr(status)));
/*
* We can't determine the case sensitivity of the share. We
* have no choice but to use the user-specified case
* sensitivity setting.
*/
if (smbc_getOptionCaseSensitive(context)) {
cli_set_case_sensitive(c, True);
} else {
cli_set_case_sensitive(c, False);
}
} else if (!is_ipc) {
DEBUG(4, ("Case sensitive: %s\n",
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? "True"
: "False")));
smbXcli_tcon_set_fs_attributes(tcon, fs_attrs);
}
if (context->internal->smb_encryption_level) {
/* Attempt UNIX smb encryption. */
if (!NT_STATUS_IS_OK(cli_force_encryption(c,
username_used,
*pp_password,
*pp_workgroup))) {
/*
* context->smb_encryption_level == 1
* means don't fail if encryption can't be negotiated,
* == 2 means fail if encryption can't be negotiated.
*/
DEBUG(4,(" SMB encrypt failed\n"));
if (context->internal->smb_encryption_level == 2) {
cli_shutdown(c);
errno = EPERM;
return NULL;
}
}
DEBUG(4,(" SMB encrypt ok\n"));
}
/*
* Ok, we have got a nice connection
* Let's allocate a server structure.
*/
srv = SMB_MALLOC_P(SMBCSRV);
if (!srv) {
cli_shutdown(c);
errno = ENOMEM;
return NULL;
}
ZERO_STRUCTP(srv);
DLIST_ADD(srv->cli, c);
srv->dev = (dev_t)(str_checksum(server) ^ str_checksum(share));
srv->no_pathinfo = False;
srv->no_pathinfo2 = False;
srv->no_pathinfo3 = False;
srv->no_nt_session = False;
done:
if (!pp_workgroup || !*pp_workgroup || !**pp_workgroup) {
workgroup = talloc_strdup(ctx, smbc_getWorkgroup(context));
} else {
workgroup = *pp_workgroup;
}
if(!workgroup) {
if (c != NULL) {
cli_shutdown(c);
}
SAFE_FREE(srv);
return NULL;
}
/* set the credentials to make DFS work */
smbc_set_credentials_with_fallback(context,
workgroup,
*pp_username,
*pp_password);
return srv;
}
/*
* Connect to a server for getting/setting attributes, possibly on an existing
* connection. This works similarly to SMBC_server().
*/
SMBCSRV *
SMBC_attr_server(TALLOC_CTX *ctx,
SMBCCTX *context,
const char *server,
uint16_t port,
const char *share,
char **pp_workgroup,
char **pp_username,
char **pp_password)
{
int flags;
struct cli_state *ipc_cli = NULL;
struct rpc_pipe_client *pipe_hnd = NULL;
NTSTATUS nt_status;
SMBCSRV *srv=NULL;
SMBCSRV *ipc_srv=NULL;
/*
* Use srv->cli->desthost and srv->cli->share instead of
* server and share below to connect to the actual share,
* i.e., a normal share or a referred share from
* 'msdfs proxy' share.
*/
srv = SMBC_server(ctx, context, true, server, port, share,
pp_workgroup, pp_username, pp_password);
if (!srv) {
return NULL;
}
server = smbXcli_conn_remote_name(srv->cli->conn);
share = srv->cli->share;
/*
* See if we've already created this special connection. Reference
* our "special" share name '*IPC$', which is an impossible real share
* name due to the leading asterisk.
*/
ipc_srv = SMBC_find_server(ctx, context, server, "*IPC$",
pp_workgroup, pp_username, pp_password);
if (!ipc_srv) {
int signing_state = SMB_SIGNING_DEFAULT;
/* We didn't find a cached connection. Get the password */
if (!*pp_password || (*pp_password)[0] == '\0') {
/* ... then retrieve it now. */
SMBC_call_auth_fn(ctx, context, server, share,
pp_workgroup,
pp_username,
pp_password);
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
return NULL;
}
}
flags = 0;
if (smbc_getOptionUseKerberos(context)) {
flags |= CLI_FULL_CONNECTION_USE_KERBEROS;
}
if (smbc_getOptionUseCCache(context)) {
flags |= CLI_FULL_CONNECTION_USE_CCACHE;
}
if (context->internal->smb_encryption_level != SMBC_ENCRYPTLEVEL_NONE) {
signing_state = SMB_SIGNING_REQUIRED;
}
nt_status = cli_full_connection(&ipc_cli,
lp_netbios_name(), server,
NULL, 0, "IPC$", "?????",
*pp_username,
*pp_workgroup,
*pp_password,
flags,
signing_state);
if (! NT_STATUS_IS_OK(nt_status)) {
DEBUG(1,("cli_full_connection failed! (%s)\n",
nt_errstr(nt_status)));
errno = ENOTSUP;
return NULL;
}
if (context->internal->smb_encryption_level) {
/* Attempt UNIX smb encryption. */
if (!NT_STATUS_IS_OK(cli_force_encryption(ipc_cli,
*pp_username,
*pp_password,
*pp_workgroup))) {
/*
* context->smb_encryption_level ==
* 1 means don't fail if encryption can't be
* negotiated, == 2 means fail if encryption
* can't be negotiated.
*/
DEBUG(4,(" SMB encrypt failed on IPC$\n"));
if (context->internal->smb_encryption_level == 2) {
cli_shutdown(ipc_cli);
errno = EPERM;
return NULL;
}
}
DEBUG(4,(" SMB encrypt ok on IPC$\n"));
}
ipc_srv = SMB_MALLOC_P(SMBCSRV);
if (!ipc_srv) {
errno = ENOMEM;
cli_shutdown(ipc_cli);
return NULL;
}
ZERO_STRUCTP(ipc_srv);
DLIST_ADD(ipc_srv->cli, ipc_cli);
nt_status = cli_rpc_pipe_open_noauth(
ipc_srv->cli, &ndr_table_lsarpc, &pipe_hnd);
if (!NT_STATUS_IS_OK(nt_status)) {
DEBUG(1, ("cli_nt_session_open fail!\n"));
errno = ENOTSUP;
cli_shutdown(ipc_srv->cli);
free(ipc_srv);
return NULL;
}
/*
* Some systems don't support
* SEC_FLAG_MAXIMUM_ALLOWED, but NT sends 0x2000000
* so we might as well do it too.
*/
nt_status = rpccli_lsa_open_policy(
pipe_hnd,
talloc_tos(),
True,
GENERIC_EXECUTE_ACCESS,
&ipc_srv->pol);
if (!NT_STATUS_IS_OK(nt_status)) {
errno = SMBC_errno(context, ipc_srv->cli);
cli_shutdown(ipc_srv->cli);
free(ipc_srv);
return NULL;
}
/* now add it to the cache (internal or external) */
errno = 0; /* let cache function set errno if it likes */
if (smbc_getFunctionAddCachedServer(context)(context, ipc_srv,
server,
"*IPC$",
*pp_workgroup,
*pp_username)) {
DEBUG(3, (" Failed to add server to cache\n"));
if (errno == 0) {
errno = ENOMEM;
}
cli_shutdown(ipc_srv->cli);
free(ipc_srv);
return NULL;
}
DLIST_ADD(context->internal->servers, ipc_srv);
}
return ipc_srv;
}
static SMBCSRV *
SMBC_server_internal(TALLOC_CTX *ctx,
SMBCCTX *context,
bool connect_if_not_found,
const char *server,
const char *share,
char **pp_workgroup,
char **pp_username,
char **pp_password,
bool *in_cache)
{
SMBCSRV *srv=NULL;
char *workgroup = NULL;
struct cli_state *c;
struct nmb_name called, calling;
const char *server_n = server;
struct sockaddr_storage ss;
int tried_reverse = 0;
int port_try_first;
int port_try_next;
int is_ipc = (share != NULL && strcmp(share, "IPC$") == 0);
uint32 fs_attrs = 0;
const char *username_used;
NTSTATUS status;
char *newserver, *newshare;
zero_sockaddr(&ss);
ZERO_STRUCT(c);
*in_cache = false;
if (server[0] == 0) {
errno = EPERM;
return NULL;
}
/* Look for a cached connection */
srv = SMBC_find_server(ctx, context, server, share,
pp_workgroup, pp_username, pp_password);
/*
* If we found a connection and we're only allowed one share per
* server...
*/
if (srv &&
*share != '\0' &&
smbc_getOptionOneSharePerServer(context)) {
/*
* ... then if there's no current connection to the share,
* connect to it. SMBC_find_server(), or rather the function
* pointed to by context->get_cached_srv_fn which
* was called by SMBC_find_server(), will have issued a tree
* disconnect if the requested share is not the same as the
* one that was already connected.
*/
/*
* Use srv->cli->desthost and srv->cli->share instead of
* server and share below to connect to the actual share,
* i.e., a normal share or a referred share from
* 'msdfs proxy' share.
*/
if (srv->cli->cnum == (uint16) -1) {
/* Ensure we have accurate auth info */
SMBC_call_auth_fn(ctx, context,
srv->cli->desthost,
srv->cli->share,
pp_workgroup,
pp_username,
pp_password);
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
cli_shutdown(srv->cli);
srv->cli = NULL;
smbc_getFunctionRemoveCachedServer(context)(context,
srv);
return NULL;
}
/*
* We don't need to renegotiate encryption
* here as the encryption context is not per
* tid.
*/
status = cli_tcon_andx(srv->cli, srv->cli->share, "?????",
*pp_password,
strlen(*pp_password)+1);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
cli_shutdown(srv->cli);
srv->cli = NULL;
smbc_getFunctionRemoveCachedServer(context)(context,
srv);
srv = NULL;
}
/* Determine if this share supports case sensitivity */
if (is_ipc) {
DEBUG(4,
("IPC$ so ignore case sensitivity\n"));
} else if (!cli_get_fs_attr_info(c, &fs_attrs)) {
DEBUG(4, ("Could not retrieve "
"case sensitivity flag: %s.\n",
cli_errstr(c)));
/*
* We can't determine the case sensitivity of
* the share. We have no choice but to use the
* user-specified case sensitivity setting.
*/
if (smbc_getOptionCaseSensitive(context)) {
cli_set_case_sensitive(c, True);
} else {
cli_set_case_sensitive(c, False);
}
} else {
DEBUG(4,
("Case sensitive: %s\n",
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? "True"
: "False")));
cli_set_case_sensitive(
c,
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? True
: False));
}
/*
* Regenerate the dev value since it's based on both
* server and share
*/
if (srv) {
srv->dev = (dev_t)(str_checksum(srv->cli->desthost) ^
str_checksum(srv->cli->share));
}
}
}
/* If we have a connection... */
if (srv) {
/* ... then we're done here. Give 'em what they came for. */
*in_cache = true;
goto done;
}
/* If we're not asked to connect when a connection doesn't exist... */
if (! connect_if_not_found) {
/* ... then we're done here. */
return NULL;
}
if (!*pp_workgroup || !*pp_username || !*pp_password) {
errno = ENOMEM;
return NULL;
}
make_nmb_name(&calling, smbc_getNetbiosName(context), 0x0);
make_nmb_name(&called , server, 0x20);
DEBUG(4,("SMBC_server: server_n=[%s] server=[%s]\n", server_n, server));
DEBUG(4,(" -> server_n=[%s] server=[%s]\n", server_n, server));
again:
zero_sockaddr(&ss);
/* have to open a new connection */
if ((c = cli_initialise()) == NULL) {
errno = ENOMEM;
return NULL;
}
if (smbc_getOptionUseKerberos(context)) {
c->use_kerberos = True;
}
if (smbc_getOptionFallbackAfterKerberos(context)) {
c->fallback_after_kerberos = True;
}
if (smbc_getOptionUseCCache(context)) {
c->use_ccache = True;
}
c->timeout = smbc_getTimeout(context);
/*
* Force use of port 139 for first try if share is $IPC, empty, or
* null, so browse lists can work
*/
if (share == NULL || *share == '\0' || is_ipc) {
port_try_first = 139;
port_try_next = 445;
} else {
port_try_first = 445;
port_try_next = 139;
}
c->port = port_try_first;
status = cli_connect(c, server_n, &ss);
if (!NT_STATUS_IS_OK(status)) {
/* First connection attempt failed. Try alternate port. */
c->port = port_try_next;
status = cli_connect(c, server_n, &ss);
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(c);
errno = ETIMEDOUT;
return NULL;
}
}
if (!cli_session_request(c, &calling, &called)) {
cli_shutdown(c);
if (strcmp(called.name, "*SMBSERVER")) {
make_nmb_name(&called , "*SMBSERVER", 0x20);
goto again;
} else { /* Try one more time, but ensure we don't loop */
/* Only try this if server is an IP address ... */
if (is_ipaddress(server) && !tried_reverse) {
fstring remote_name;
struct sockaddr_storage rem_ss;
if (!interpret_string_addr(&rem_ss, server,
NI_NUMERICHOST)) {
DEBUG(4, ("Could not convert IP address "
"%s to struct sockaddr_storage\n",
server));
errno = ETIMEDOUT;
return NULL;
}
tried_reverse++; /* Yuck */
if (name_status_find("*", 0, 0,
&rem_ss, remote_name)) {
make_nmb_name(&called,
remote_name,
0x20);
goto again;
}
}
}
errno = ETIMEDOUT;
return NULL;
}
DEBUG(4,(" session request ok\n"));
status = cli_negprot(c);
if (!NT_STATUS_IS_OK(status)) {
cli_shutdown(c);
errno = ETIMEDOUT;
return NULL;
}
username_used = *pp_username;
if (!NT_STATUS_IS_OK(cli_session_setup(c, username_used,
*pp_password,
strlen(*pp_password),
*pp_password,
strlen(*pp_password),
*pp_workgroup))) {
fprintf(stderr, "JerryLin: Libsmb_server.c->SMBC_server_internal: cli_session_setup fail with username=[%s], password=[%s]\n", username_used, *pp_password);
/* Failed. Try an anonymous login, if allowed by flags. */
username_used = "";
if (smbc_getOptionNoAutoAnonymousLogin(context) ||
!NT_STATUS_IS_OK(cli_session_setup(c, username_used,
*pp_password, 1,
*pp_password, 0,
*pp_workgroup))) {
cli_shutdown(c);
errno = EPERM;
return NULL;
}
}
status = cli_init_creds(c, username_used,
*pp_workgroup, *pp_password);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" session setup ok\n"));
/* here's the fun part....to support 'msdfs proxy' shares
(on Samba or windows) we have to issues a TRANS_GET_DFS_REFERRAL
here before trying to connect to the original share.
cli_check_msdfs_proxy() will fail if it is a normal share. */
if ((c->capabilities & CAP_DFS) &&
cli_check_msdfs_proxy(ctx, c, share,
&newserver, &newshare,
/* FIXME: cli_check_msdfs_proxy() does
not support smbc_smb_encrypt_level type */
context->internal->smb_encryption_level ?
true : false,
*pp_username,
*pp_password,
*pp_workgroup)) {
cli_shutdown(c);
srv = SMBC_server_internal(ctx, context, connect_if_not_found,
newserver, newshare, pp_workgroup,
pp_username, pp_password, in_cache);
TALLOC_FREE(newserver);
TALLOC_FREE(newshare);
return srv;
}
/* must be a normal share */
status = cli_tcon_andx(c, share, "?????", *pp_password,
strlen(*pp_password)+1);
if (!NT_STATUS_IS_OK(status)) {
errno = map_errno_from_nt_status(status);
fprintf(stderr, "JerryLin: Libsmb_server.c->SMBC_server_internal: cli_tcon_andx return %08X, errno=[%d]\n", NT_STATUS_V(status), errno);
cli_shutdown(c);
return NULL;
}
DEBUG(4,(" tconx ok\n"));
/* Determine if this share supports case sensitivity */
if (is_ipc) {
DEBUG(4, ("IPC$ so ignore case sensitivity\n"));
} else if (!cli_get_fs_attr_info(c, &fs_attrs)) {
DEBUG(4, ("Could not retrieve case sensitivity flag: %s.\n",
cli_errstr(c)));
/*
* We can't determine the case sensitivity of the share. We
* have no choice but to use the user-specified case
* sensitivity setting.
*/
if (smbc_getOptionCaseSensitive(context)) {
cli_set_case_sensitive(c, True);
} else {
cli_set_case_sensitive(c, False);
}
} else {
DEBUG(4, ("Case sensitive: %s\n",
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? "True"
: "False")));
cli_set_case_sensitive(c,
(fs_attrs & FILE_CASE_SENSITIVE_SEARCH
? True
: False));
}
if (context->internal->smb_encryption_level) {
/* Attempt UNIX smb encryption. */
if (!NT_STATUS_IS_OK(cli_force_encryption(c,
username_used,
*pp_password,
*pp_workgroup))) {
/*
* context->smb_encryption_level == 1
* means don't fail if encryption can't be negotiated,
* == 2 means fail if encryption can't be negotiated.
*/
DEBUG(4,(" SMB encrypt failed\n"));
if (context->internal->smb_encryption_level == 2) {
cli_shutdown(c);
errno = EPERM;
return NULL;
}
}
DEBUG(4,(" SMB encrypt ok\n"));
}
/*
* Ok, we have got a nice connection
* Let's allocate a server structure.
*/
srv = SMB_MALLOC_P(SMBCSRV);
if (!srv) {
cli_shutdown(c);
errno = ENOMEM;
return NULL;
}
ZERO_STRUCTP(srv);
srv->cli = c;
srv->dev = (dev_t)(str_checksum(server) ^ str_checksum(share));
srv->no_pathinfo = False;
srv->no_pathinfo2 = False;
srv->no_nt_session = False;
done:
if (!pp_workgroup || !*pp_workgroup || !**pp_workgroup) {
workgroup = talloc_strdup(ctx, smbc_getWorkgroup(context));
} else {
workgroup = *pp_workgroup;
}
if(!workgroup) {
return NULL;
}
/* set the credentials to make DFS work */
smbc_set_credentials_with_fallback(context,
workgroup,
*pp_username,
*pp_password);
return srv;
}