/*
* Description : open uart collision control
* Input :
* Output :
*/
static int snfc_uart_control_open(struct inode *inode, struct file *fp)
{
int rc = 0;
if(isopen_snfcuartcontrol == 1)
{
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_open - already open \n");
return 0;
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_open - start \n");
isopen_snfcuartcontrol = 1;
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
if(gpio_init ==0)
{
rc = gpio_request(snfc_gpios.gpio_hvdd,"snfc_hvdd");
if(rc){
SNFC_DEBUG_MSG("[snfc_intu_poll] gpio_request snfc_hvdd fail\n");
}
snfc_gpio_write(snfc_gpios.gpio_hvdd, GPIO_HIGH_VALUE);
rc = gpio_request(snfc_gpios.gpio_uicc_con, "snfc_uicc_con");
{
SNFC_DEBUG_MSG("[snfc_driver] gpio_request snfc_uicc_con fail\n");
}
snfc_gpio_write(snfc_gpios.gpio_uicc_con, GPIO_LOW_VALUE);
gpio_init = 1;
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_open - end \n");
return rc;
}
/*
* Description :
* Input :
* Output :
*/
static int snfc_uart_control_init(void)
{
int rc=0;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_init - start \n");
/* register the device file */
rc = misc_register(&snfc_uart_control_device);
if (rc)
{
SNFC_DEBUG_MSG("[snfc_uart_control] FAIL!! can not register snfc_uart_control \n");
return rc;
}
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
#ifndef CONFIG_CXD2235AGG_GJ_KDDI
rc = gpio_request(82,"snfc_hvdd");
if(rc)
{
SNFC_DEBUG_MSG("[snfc_intu_poll] gpio_request snfc_hvdd fail\n");
}
snfc_gpio_write(82, GPIO_HIGH_VALUE);
#endif
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_init - end \n");
// koto_abnormal = 2;
return 0;
}
int snfc_hvdd_wait_rfs_low(void)
{
int rc = 0;
do{
snfcpollavail_sig = 0;
if( snfc_gpio_read(snfc_gpios.gpio_rfs) == GPIO_HIGH_VALUE ){
snfc_gpio_write(snfc_gpios.gpio_uicc_con ,GPIO_HIGH_VALUE );
} else {
snfc_gpio_write(snfc_gpios.gpio_uicc_con ,GPIO_LOW_VALUE );
break;
}
rc = wait_event_interruptible( snfcpollavailwq, snfcpollavail_sig);
}while(rc != -ERESTARTSYS);
return rc;
}
/*
* Description : open uart collision control
* Input :
* Output :
*/
static int snfc_uart_control_open(struct inode *inode, struct file *fp)
{
int rc = 0;
if(isopen_snfcuartcontrol == 1)
{
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_open - already open \n");
return 0;
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_open - start \n");
isopen_snfcuartcontrol = 1;
if(gpio_init ==0)
{
rc = gpio_request(snfc_get_hsel_gpio_num(), "snfc_hsel");
if (rc){
SNFC_DEBUG_MSG("[snfc_intu_poll] gpio_request snfc_hsel fail\n");
}
rc = gpio_request(GPIO_SNFC_PON, "snfc_pon");
if (rc){
SNFC_DEBUG_MSG("[snfc_intu_poll] gpio_request snfc_pon fail\n");
}
//snfc_gpio_open(GPIO_SNFC_HSEL,GPIO_DIRECTION_OUT,GPIO_LOW_VALUE);
//snfc_gpio_open(GPIO_SNFC_PON,GPIO_DIRECTION_OUT,GPIO_LOW_VALUE);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] GPIO_SNFC_PON = %d, GPIO_SNFC_HSEL = %d\n",
snfc_gpio_read(GPIO_SNFC_PON),snfc_gpio_read(snfc_get_hsel_gpio_num()) );
rc = gpio_request(snfc_get_hvdd_gpio_num(),"snfc_hvdd");
if(rc){
SNFC_DEBUG_MSG("[snfc_intu_poll] gpio_request snfc_hvdd fail\n");
}
snfc_gpio_write(snfc_get_hvdd_gpio_num(), GPIO_HIGH_VALUE);
gpio_init = 1;
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_open - end \n");
return rc;
}
/*
* Description :
* Input :
* Output :
*/
static long snfc_uart_control_ioctl(struct file *flip, unsigned int cmd, unsigned long arg)
{
//ioctl_buf *k_buf;
//int i,err;
int size;
_e_snfc_uart_status current_status;
int autopoll_wait_cnt;
int break_cnt;
unsigned char write_buf = 0x00/*, read_buf = 0x00*/;
int rc =0;
size = _IOC_SIZE(cmd);
SNFC_DEBUG_MSG_MIDDLE("[snfc_uart_control] snfc_uart_control_ioctl - start,cmd =%d\n", cmd);
current_status = __snfc_uart_control_get_uart_status();
if( current_status == UART_STATUS_FOR_FELICA )
{
SNFC_DEBUG_MSG("[snfc_uart_control] snfc_uart_control_ioctl, UART is used to FeliCa\n");
return -1;
}
__snfc_uart_control_set_uart_status(UART_STATUS_FOR_NFC);
switch(cmd)
{
case IOCTL_SNFC_START_SETTING :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_SETTING - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_SETTING - end\n");
break;
case IOCTL_SNFC_START_AUTOPOLL :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_AUTOPOLL - start\n");
autopoll_wait_cnt = 0;
break_cnt = 0;
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
#ifndef CONFIG_CXD2235AGG_GJ_KDDI
//SNFC_DEBUG_MSG("[snfc_uart_control] !!!! RFS disable start !!!!\n");
disable_irq(gpio_to_irq(gpio_rfs));
#endif
mdelay(10);
autopoll_status = 1;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_AUTOPOLL - end\n");
break;
case IOCTL_SNFC_START_RW :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_RW - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_RW - end\n");
break;
case IOCTL_SNFC_START_TARGET :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_TARGET - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
if(GPIO_HIGH_VALUE == snfc_gpio_read(gpio_rfs))
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_TARGET - end\n");
break;
case IOCTL_SNFC_START_INTU :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_INTU - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
//mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_INTU - end\n");
break;
case IOCTL_SNFC_START_WAITSIMBOOT:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_WAITSIMBOOT - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_WAITSIMBOOT - end\n");
break;
case IOCTL_SNFC_HSEL_UP:
forced_hsel_up_flag = 1;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_hsel_up\n");
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_HIGH_VALUE);
break;
case IOCTL_SNFC_HSEL_DOWN:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_hsel_down\n");
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_LOW_VALUE);
forced_hsel_up_flag = 0;
if(forced_pon_up_flag == 0 && forced_hsel_up_flag == 0)
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
break;
case IOCTL_SNFC_PON_UP:
forced_pon_up_flag = 1;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_pon_up\n");
snfc_gpio_write(GPIO_SNFC_PON, GPIO_HIGH_VALUE);
mdelay(10);
break;
case IOCTL_SNFC_PON_DOWN:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_pon_down\n");
forced_pon_up_flag = 0;
snfc_gpio_write(GPIO_SNFC_PON, GPIO_LOW_VALUE);
if(forced_pon_up_flag == 0 && forced_hsel_up_flag == 0)
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
break;
case IOCTL_SNFC_BOOT_CEN_HI: //Kernel init only
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_boot_hi\n");
SNFC_DEBUG_MSG_MIDDLE("[snfc_uart_control] CEN = High (UNLOCK) \n");
write_buf = 0x81; // set unlock
//mutex_lock(&nfc_cen_mutex);
rc = snfc_i2c_write(0x02, &write_buf, 1);
//mutex_unlock(&nfc_cen_mutex);
break;
case IOCTL_SNFC_BOOT_CEN_LO: //Kernel init only
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_boot_low\n");
SNFC_DEBUG_MSG_MIDDLE("[snfc_uart_control] CEN = Low (LOCK) \n");
write_buf = 0x80; // set lock
//mutex_lock(&nfc_cen_mutex);
rc = snfc_i2c_write(0x02, &write_buf, 1);
//mutex_unlock(&nfc_cen_mutex);
break;
case IOCTL_SNFC_HVDD_DOWN_SET:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_hvdd_down\n");
while(koto_abnormal == 10)
{
if(snfc_poweroff_flag == 1)
{
break;
}
usleep(100);
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_hvdd_down HVDD %d\n",snfc_gpio_read(86));
break;
case IOCTL_SNFC_END :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_END - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
{
SNFC_DEBUG_MSG("[snfc_uart_control] pon & hsel forced up!! pon and/or sel will keep high\n");
break;
}
if(current_status != UART_STATUS_FOR_NFC)
{
SNFC_DEBUG_MSG("[snfc_uart_control] IOCTL_SNFC_END, UART is not used to NFC\n");
//return -2;
}
snfc_gpio_write(GPIO_SNFC_HSEL, GPIO_LOW_VALUE);
snfc_gpio_write(GPIO_SNFC_PON, GPIO_LOW_VALUE);
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
#ifndef CONFIG_CXD2235AGG_GJ_KDDI
if(autopoll_status == 1)
{
//SNFC_DEBUG_MSG("[snfc_uart_control] !!!! RFS disable end !!!!\n");
enable_irq(gpio_to_irq(gpio_rfs));
}
#endif
autopoll_status = 0;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_END - end (hsel low)(pon low)\n");
break;
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_ioctl - end\n");
return 0;
}
/*
* Description :
* Input :
* Output :
*/
static long snfc_uart_control_ioctl(struct file *flip, unsigned int cmd, unsigned long arg)
{
//ioctl_buf *k_buf;
//int i,err;
int size;
_e_snfc_uart_status current_status;
int break_cnt;
int autopoll_wait_cnt;
unsigned char write_buf = 0x00/*, read_buf = 0x00*/;
int rc =0;
int snfcbootmode;
size = _IOC_SIZE(cmd);
SNFC_DEBUG_MSG_MIDDLE("[snfc_uart_control] snfc_uart_control_ioctl - start,cmd =%d\n", cmd);
if(cmd == IOCTL_SNFC_READ_BOOTMODE){
snfcbootmode = lge_get_boot_mode();
SNFC_DEBUG_MSG("[snfc_uart_control] read boot mode %d \n",snfcbootmode);
// 0 : NORMAL, 1 : CHARGER, 2 : CHARGERLOGO, 3 : FACTORY, 4 : FACTORY2, 5 : PIFBOOT, 6 : PIFBOOT2, 7 : MINIOS
return snfcbootmode;
}
current_status = __snfc_uart_control_get_uart_status();
if( current_status == UART_STATUS_FOR_FELICA )
{
SNFC_DEBUG_MSG("[snfc_uart_control] snfc_uart_control_ioctl, UART is used to FeliCa\n");
return -1;
}
__snfc_uart_control_set_uart_status(UART_STATUS_FOR_NFC);
switch(cmd)
{
case IOCTL_SNFC_START_SETTING :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_SETTING - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] hsel %d, pon %d\n",
snfc_gpios.gpio_hsel,snfc_gpios.gpio_pon);
SNFC_DEBUG_MSG_LOW("[snfc_driver] GPIO_SNFC_PON = %d, GPIO_SNFC_HSEL = %d, GPIO_SNFC_HBDD = %d\n",
snfc_gpio_read(snfc_gpios.gpio_pon),snfc_gpio_read(snfc_gpios.gpio_hsel),snfc_gpio_read(snfc_gpios.gpio_hvdd) );
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_SETTING - end\n");
break;
case IOCTL_SNFC_START_AUTOPOLL :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_AUTOPOLL - start\n");
autopoll_wait_cnt = 0;
break_cnt = 0;
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
mdelay(10);
autopoll_status = 1;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_AUTOPOLL - end\n");
break;
case IOCTL_SNFC_START_RW :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_RW - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_RW - end\n");
break;
case IOCTL_SNFC_START_TARGET :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_TARGET - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
if(GPIO_HIGH_VALUE == snfc_gpio_read(snfc_gpios.gpio_rfs))
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_TARGET - end\n");
break;
case IOCTL_SNFC_START_INTU :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_INTU - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
//mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_INTU - end\n");
break;
case IOCTL_SNFC_START_WAITSIMBOOT:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_WAITSIMBOOT - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
break;
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
mdelay(10);
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_START_WAITSIMBOOT - end\n");
break;
case IOCTL_SNFC_HSEL_UP:
forced_hsel_up_flag = 1;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_hsel_up\n");
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_HIGH_VALUE);
break;
case IOCTL_SNFC_HSEL_DOWN:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_hsel_down\n");
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_LOW_VALUE);
forced_hsel_up_flag = 0;
if(forced_pon_up_flag == 0 && forced_hsel_up_flag == 0)
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
break;
case IOCTL_SNFC_PON_UP:
forced_pon_up_flag = 1;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_pon_up\n");
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_HIGH_VALUE);
mdelay(10);
break;
case IOCTL_SNFC_PON_DOWN:
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_pon_down\n");
forced_pon_up_flag = 0;
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_LOW_VALUE);
if(forced_pon_up_flag == 0 && forced_hsel_up_flag == 0)
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
break;
case IOCTL_SNFC_BOOT_CEN_HI: //Kernel init only
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_boot_hi\n");
SNFC_DEBUG_MSG_MIDDLE("[snfc_uart_control] CEN = High (UNLOCK) \n");
write_buf = 0x81; // set unlock
//mutex_lock(&nfc_cen_mutex);
rc = snfc_i2c_write(0x02, &write_buf, 1, snfc_i2c_dev.client);
//mutex_unlock(&nfc_cen_mutex);
break;
case IOCTL_SNFC_BOOT_CEN_LO: //Kernel init only
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] ioctl_snfc_boot_low\n");
SNFC_DEBUG_MSG_MIDDLE("[snfc_uart_control] CEN = Low (LOCK) \n");
write_buf = 0x80; // set lock
//mutex_lock(&nfc_cen_mutex);
rc = snfc_i2c_write(0x02, &write_buf, 1, snfc_i2c_dev.client);
//mutex_unlock(&nfc_cen_mutex);
break;
case IOCTL_SNFC_HVDD_DOWN_SET:
SNFC_DEBUG_MSG("snfc_uart_control] before HVDD Down\n");
snfc_hvdd_wait_rfs_low();
break;
case IOCTL_SNFC_END :
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_END - start\n");
if(forced_pon_up_flag == 1 || forced_hsel_up_flag == 1)
{
SNFC_DEBUG_MSG("[snfc_uart_control] pon & hsel forced up!! pon and/or sel will keep high\n");
break;
}
if(current_status != UART_STATUS_FOR_NFC)
{
SNFC_DEBUG_MSG("[snfc_uart_control] IOCTL_SNFC_END, UART is not used to NFC\n");
//return -2;
}
snfc_gpio_write(snfc_gpios.gpio_hsel, GPIO_LOW_VALUE);
snfc_gpio_write(snfc_gpios.gpio_pon, GPIO_LOW_VALUE);
__snfc_uart_control_set_uart_status(UART_STATUS_READY);
autopoll_status = 0;
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] IOCTL_SNFC_END - end (hsel low)(pon low)\n");
break;
}
SNFC_DEBUG_MSG_LOW("[snfc_uart_control] snfc_uart_control_ioctl - end\n");
return 0;
}
